Effect of Microwave Irradiation on the Flow of Micro-Particle Suspension (TiO2/H2O) in Micro-Scale Porous Structure

2009 ◽  
Author(s):  
Qianqian Di ◽  
Junhong Yang ◽  
Mingdi Sun ◽  
Liqiu Wang
Keyword(s):  
Particle Size ◽  
Microwave Irradiation ◽  
Porous Structure ◽  
Membrane Separation ◽  
Porous Membrane ◽  
Particle Suspension ◽  
Material Transfer ◽  
Volume Percentage ◽  
Microwave Assisted ◽  
Average Size

The mass flow and transport phenomenon in porous media widely exists in nature and engineering applications. Membrane separation is a typical material transfer process in the porous medium. The objective of the present study is to estimate the effect of microwave irradiation on transport of micro-particle suspension through porous structure, using the flowing of TiO2/H2O micro particle suspension through 0.45μm mixed cellulose micro porous membrane as an example. The work mainly compared the filtration behavior of suspension through membranes during microwave assisted filtration and conventional filtration. The particle size distribution of suspension was also characterized by using laser particle size analyzer. As the results, it is measured that the processed volume of suspension during microwave assisted filtration is considerable higher than that during conventional filtration. It is also observed that the average size of particles in suspension is 3.80 μm (10 g/L), and the volume percentage of particles smaller than micro-pore size 0.45μm in micro-filtration membrane is about 11.5%. It is indicated that microwave assisted filtration could considerably enhance the processed volume of suspension with micro-particle, which might be able to give some inspiration to the optimization of some processed technology of suspension chemical industry, food industry and water treatment industry.

scholarly journals Synthesis by Microwaves of Bimetallic Nano-Rhodium-Palladium

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
M. Ugalde ◽  
E. Chavira ◽  
M. T. Ochoa-Lara ◽  
I. A. Figueroa ◽  
C. Quintanar ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Particle Size ◽  
Sol Gel ◽  
Inert Atmosphere ◽  
Microwave Oven ◽  
Microwave Assisted ◽  
Gel Technique ◽  
Pd Clusters ◽  
Average Size ◽  
By Products

An improved acrylamide sol-gel technique using a microwave oven in order to synthesize bimetallic Rh-Pd particles is reported and discussed. The synthesis of Pd and Rh nanoparticles was carried out separately. The polymerization to form the gel of both Rh and Pd was carried out at 80°C under constant agitations. The method chosen to prepare the Rh and Pd xerogels involved the decomposition of both gels. The process begins by steadily increasing the temperature of the gel inside a microwave oven (from 80°C to 170°C). In order to eliminate the by-products generated during the sol-gel reaction, a heat treatment at a temperature of 1000°C for 2 h in inert atmosphere was carried out. After the heat treatment, the particle size increased from 50 nm to 200 nm, producing the bimetallic Rh-Pd clusters. It can be concluded that the reported microwave-assisted, sol-gel method was able to obtain nano-bimetallic Rh-Pd particles with an average size of 75 nm.

Application of the ceramic membrane with hydrophobic skin layer to separation of activated sludge

1997 ◽  
Vol 35 (8) ◽  
pp. 137-144 ◽  
Author(s):  
Tsuyoshi Nomura ◽  
Takao Fujii ◽  
Motoyuki Suzuki
Keyword(s):  
Activated Sludge ◽  
Pore Size ◽  
Ceramic Membrane ◽  
Membrane Separation ◽  
Porous Ceramic ◽  
Porous Membrane ◽  
Skin Layer ◽  
Gas Permeation ◽  
Wide Range ◽  
Cake Layer

Porous membrane of poly(tetrafluoroethylene) (PTFE) was formed on the surface of porous ceramic tubes by means of heat treatment of the PTFE particles deposit layer prepared by filtering PTFE microparticles emulsified in aqueous phase. By means of inert gas permeation, pore size was determined and compared with scanning electron micrograph observation. Also rejection measurement of aqueous dextran solutions of wide range of molecular weights showed consistent results regarding the pore size. Since the membrane prepared by this method is stable and has unique features derived from PTFE, it is expected that the membrane has interesting applications in the field of water treatment. Membrane separation of activated sludge by this composite membrane and original ceramics membrane showed that the PTFE membrane gives better detachability of the cake layer formed on the membrane. This might be due to the hydrophobic nature of the PTFE skin layer.

Regioselective Synthesis of Potent 4,5,6,7-Tetrahydroindazole Derivatives via Microwave-assisted Vilsmeier-Haack Reaction and their Antioxidant Activity Evaluation

2019 ◽  
Vol 16 (3) ◽  
pp. 194-201 ◽  
Author(s):  
Renu Bala ◽  
Vandana Devi ◽  
Pratibha Singh ◽  
Navjot Kaur ◽  
Pawandeep Kaur ◽  
...  
Keyword(s):  
Antioxidant Activity ◽  
Microwave Irradiation ◽  
Biological Activities ◽  
Reaction Times ◽  
Conventional Heating ◽  
High Chemical ◽  
Microwave Assisted ◽  
Work Up ◽  
Active Methylene ◽  
By Products

Background: Tetrahydroindazole, a member of the fused-pyrazole system, is a least studied class of heterocyclic compounds owing to its scarcity in nature. However, a large number of synthetically prepared tetrahydroindazoles are known to show a variety of biological activities such as interleukin- 2 inducible T-Cell kinase inhibitors, AMPA receptor positive allosteric modulators, antitumor, antituberculosis, anti-inflammatory and antimicrobial activities. Vilsmeier-Haack reaction is one of the most important chemical reactions used for formylation of electron rich arenes. Even though Vilsmeier- Haack reaction was studied on a wide variety of hydrazones derived from active methylene compounds, literature lacks the examples of the use of 4-substituted cyclohexanones as a substrate for the synthesis of 4,5,6,7-tetrahydroindazoles. The study of the reaction of Vilsmeier-Haack reagent with hydrazones derived from cyclic keto compounds having active methylene has been considered the interested topic of investigation. In the present study, ethyl cyclohexanone-4-carboxylate was treated with one equivalent of various hydrazines for two hours and the resulted hydrazones were further treated with an OPC-VH reagent (Vilsmeier-Haack reagent isolated from phthaloyl dichloride and N,Ndimethylformamide) afforded 4,5,6,7-tetrahydroindazoles in excellent yields. The synthesized compounds 4a-f and 5a-f were screened for their antioxidant activities using the DPPH radical scavenging assay. The target compounds were synthesized regioselectively using 4+1 approach in excellent yields. A number of experiments using both conventional heating as well as microwave irradiation methods were tried and on comparison, microwave irradiation method was found excellent in terms of easy work up, high chemical yields, shortened reaction times, clean and, no by-products formation. Some of the synthesized compounds showed significant antioxidant activity. The microwave assisted synthesis of 4,5,6,7-tetrahydroindazoles from ethyl cyclohexanone-4-carboxylate has been reported under mild conditions in excellent yield. Easy work up, high chemical yield, shortened reaction times, clean and no by-products formation are the major advantages of this protocol. These advantages may make this method useful for chemists who are interested in developing novel 4,5,6,7-tetrahydroindazole based drugs.

Microwave-assisted Synthesis of Benzoxazoles Derivatives

2020 ◽  
Vol 7 (3) ◽  
pp. 183-195
Author(s):  
Musa Özil ◽  
Emre Menteşe
Keyword(s):  
Microwave Irradiation ◽  
Reaction Medium ◽  
Pharmaceutical Chemistry ◽  
Conventional Heating ◽  
High Yield ◽  
Microwave Assisted Synthesis ◽  
Microwave Assisted ◽  
Optical Brighteners ◽  
Chemistry Research ◽  
Extensive Class

Background: Benzoxazole, containing a 1,3-oxazole system fused with a benzene ring, has a profound effect on medicinal chemistry research owing to its important pharmacological activities. On the other hand, the benzoxazole derivative has exhibited important properties in material science. Especially in recent years, microwave-assisted synthesis is a technique that can be used to increase diversity and quick research in modern chemistry. The utilization of microwave irradiation is beneficial for the synthesis of benzoxazole in recent years. In this focused review, we provide a metaanalysis of studies on benzoxazole in different reaction conditions, catalysts, and starting materials by microwave technique so far, which is different from conventional heating. Methods: Synthesis of different kind of benzoxazole derivatives have been carried out by microwave irradiation. The most used method to obtain benzoxazoles is the condensation of 2-aminophenol or its derivatives with aldehydes, carboxylic acids, nitriles, isocyanates, and aliphatic amines. Results: Benzoxazole system and its derivatives have exhibited a broad range of pharmacological properties. Thus, many scientists have remarked on the importance of the synthesis of different benzoxazole derivatives. Conventional heating is a relatively inefficient and slow method to convey energy in orientation to the reaction medium. However, the microwave-assisted heating technique is a more effective interior heating by straight coupling of microwave energy with the molecules. Conclusion: In this review, different studies were presented on the recent details accessible in the microwave- assisted techniques on the synthesis of the benzoxazole ring. It presents all examples of such compounds that have been reported from 1996 to the present. Benzoxazoles showed an extensive class of chemical substances not only in pharmaceutical chemistry but also in dyestuff, polymer industries, agrochemical, and optical brighteners. Thus the development of fast and efficient achievement of benzoxazoles with a diversity of substituents in high yield is getting more noteworthy. As shown in this review, microwave-assisted synthesis of benzoxazoles is a very effective and useful technique.

scholarly journals Microwave-Assisted Asinger Synthesis of Thiazolines

2020 ◽  
Vol 3 (1) ◽  
pp. 27
Author(s):  
Raúl Eduardo Gordillo-Cruz ◽  
Liliana Gonzalez-Reyes ◽  
Milton Coporo-Reyes ◽  
Nieves Zavala-Segovia ◽  
Bernardo A. Frontana-Uribe ◽  
...  
Keyword(s):  
Microwave Irradiation ◽  
Reaction Times ◽  
Reaction Conditions ◽  
Microwave Assisted

An array of 2,4-disubstituted thiazolines was obtained through Asinger reaction approach from the straightforward treatment of diverse aldehydes/ketones with 1-mercaptopropan-2-one, in the presence of NH3 assisted by microwave irradiation, displaying similar and sometimes higher yields, as well as shorter reaction times that traditional Asinger reaction conditions at room and lower temperatures.

Annealing effects on phase transformation and powder microstructure of nanocrystalline zirconia polymorphs

1999 ◽  
Vol 14 (1) ◽  
pp. 90-96 ◽  
Author(s):  
R. Ramamoorthy ◽  
S. Ramasamy ◽  
D. Sundararaman
Keyword(s):  
Monoclinic Phase ◽  
Lattice Strain ◽  
Dopant Concentration ◽  
Precipitation Method ◽  
Strain Effect ◽  
Volume Percentage ◽  
Annealing Temperatures ◽  
Annealing Effects ◽  
Nanocrystalline Zirconia ◽  
Average Size

Nanocrystalline zirconia powders in pure form and doped with yttria and calcia were prepared by the precipitation method. In the as-prepared condition, all the doped samples show only monoclinic phase, independent of the dopants and dopant concentration. On annealing the powders at 400 °C and above, in the case of 3 and 6 mol% Y2O3 stabilized ZrO2 (3YSZ and 6YSZ), the monoclinic phase transforms to tetragonal and cubic phases, respectively, whereas in 3 and 6 mol% CaO stabilized ZrO2 (3CSZ and 6CSZ), the volume percentage of the monoclinic phase gradually decreases up to the annealing temperature of about 1000 °C and then increases for higher annealing temperatures. The presence of monoclinic phase in the as-prepared samples of doped zirconia has been attributed to the lattice strain effect which results in the less symmetric lattice. For the annealing temperatures below 1000 °C, the phenomenon of partial stabilization of the tetragonal phase in 3CSZ and 6CSZ can be explained in terms of the grain size effect. High resolution transmission electron microscopy (HRTEM) observations reveal the lattice strain structure in the as-prepared materials. The particles are found to be a tightly bound aggregate of small crystallites with average size of 10 nm. The morphology of the particles is observed to be dependent on the dopants and dopant concentration.

scholarly journals Microwave-assisted Oxidation of Alcohols by Pyridinium Chlorochromate

1999 ◽  
Vol 23 (2) ◽  
pp. 118-119
Author(s):  
Vaishali Chakraborty ◽  
Manobjyoti Bordoloi
Keyword(s):  
Microwave Irradiation ◽  
Pyridinium Chlorochromate ◽  
Microwave Assisted ◽  
Oxidation Of Alcohols

An efficient and mild methodology for the oxidation of alcohols to the corresponding carbonyl functions is described using pyridinium chlorochromate under microwave irradiation.

scholarly journals Microwave-Assisted Combustion Synthesis of ZnO Nanoparticles

2013 ◽  
Vol 2013 ◽  
pp. 1-4 ◽  
Author(s):  
M. Kooti ◽  
A. Naghdi Sedeh
Keyword(s):  
Electron Microscopy ◽  
Zno Nanoparticles ◽  
Combustion Method ◽  
Zinc Nitrate ◽  
High Yield ◽  
Fast Method ◽  
Simple Method ◽  
X Ray ◽  
Microwave Assisted ◽  
Average Size

A new and simple method was applied for the synthesis of ZnO nanoparticles with an average size of 20 nm. In this microwave-assisted combustion method, glycine as a fuel and zinc nitrate as precursor were used. The final product was obtained very fast with high yield and purity. The synthesized nanoscale ZnO was characterized by X-ray Diffraction (XRD), Energy Dispersive X-ray spectroscopy (EDX), and Fourier transform infrared spectroscopy (FT-IR). The size and morphology of the ZnO nanoparticles have been determined by field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) techniques. This is a simple and fast method for the preparation of ZnO nanoparticles with no need for expensive materials or complicated treatments.

scholarly journals ZnWO4 Nanoparticle Scintillators for High Resolution X-ray Imaging

Nanomaterials ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 1721
Author(s):  
Heon Yong Jeong ◽  
Hyung San Lim ◽  
Ju Hyuk Lee ◽  
Jun Heo ◽  
Hyun Nam Kim ◽  
...  
Keyword(s):  
Particle Size ◽  
Zinc Oxide ◽  
High Resolution ◽  
Tungsten Oxide ◽  
Spatial Resolution ◽  
High Spatial Resolution ◽  
X Ray ◽  
X Ray Imaging ◽  
Average Size ◽  
And Tungsten

The effect of scintillator particle size on high-resolution X-ray imaging was studied using zinc tungstate (ZnWO4) particles. The ZnWO4 particles were fabricated through a solid-state reaction between zinc oxide and tungsten oxide at various temperatures, producing particles with average sizes of 176.4 nm, 626.7 nm, and 2.127 μm; the zinc oxide and tungsten oxide were created using anodization. The spatial resolutions of high-resolution X-ray images, obtained from utilizing the fabricated particles, were determined: particles with the average size of 176.4 nm produced the highest spatial resolution. The results demonstrate that high spatial resolution can be obtained from ZnWO4 nanoparticle scintillators that minimize optical diffusion by having a particle size that is smaller than the emission wavelength.

A Convenient Method for Preparing Well-Dispersed Er2Zr2O7 Nanocrystals

2010 ◽  
Vol 123-125 ◽  
pp. 611-614 ◽  
Author(s):  
Yu Ping Tong ◽  
Rui Zhu Zhang ◽  
Shun Bo Zhao ◽  
Chang Yong Li
Keyword(s):  
Particle Size ◽  
Combustion Synthesis ◽  
Crystal Size ◽  
Lattice Distortion ◽  
Combustion Method ◽  
Treatment Temperature ◽  
Synthesis Process ◽  
Thermal Treatment Temperature ◽  
Average Size ◽  
Xrd And Tem

Well-dispersed fluorite Er2Zr2O7 nanocrystals have been successfully prepared by a convenient salt-assistant combustion method. The effects of calcinations temperature and salt category on the characteristics of the products were investigated by XRD and TEM. The thermal treatment temperature has an important effect on crystal size and lattice distortion of the nanocrystals. The experiment showed that the introduction of salt in the combustion synthesis process resulted in the formation of well-dispersed Er2Zr2O7 nanocrystals. The average size was 30 nm and was in agreement with the XRD result, which indicated that the nanocrystals were uniform in particle size distribution. Moreover, the possible formation process in the salt-assisted combustion synthesis was also analyzed.

Sign in / Sign up

Export Citation Format

Share Document