Advanced Power Plant Concept With Application of Exhaust CO2 to Liquid Fuel Production

2017 ◽  
Author(s):  
B. Chudnovsky ◽  
L. Levin ◽  
A. Talanker ◽  
A. Kunin ◽  
J. Cohen ◽  
...  
Keyword(s):  
Power Generation ◽  
Power Plant ◽  
Flue Gas ◽  
Electricity Generation ◽  
Liquid Fuel ◽  
Power Plants ◽  
Fuel Combustion ◽  
Co2 Conversion ◽  
Fuel Production ◽  
Generation Plant

Today there is a growing concern about the ramifications of global warming resulting from the use of fossil fuels and the associated carbon dioxide emissions. Oxy-fuel combustion is a promising response to this issue, since the product of the combustion is a CO2 rich flue gas, which requires no further separation from other emission gases and thus can be sequestrated, or utilized. Here we present an analysis of a novel technology for combining oxy-fuel combustion with utilization of the CO2 rich flue gas for syntetic fuel production. The technology concept involves a new method of using concentrated solar energy for the dissociation of carbon dioxide (CO2) to carbon monoxide (CO) and oxygen (O2). Simultaneously, the same device can dissociate water (H2O) to hydrogen (H2) and oxygen (O2). The CO, or the mixture of CO and H2 (called Syngas), can then be used as a gaseous fuel (e.g. in power plants), or converted to a liquid fuel (e.g. methanol), which is relatively easy to store and transport, and can be used in motor vehicles and electricity generation facilities. The oxygen produced in the process can be used in oxy-fuel combustion or other advanced combustion methods in power plants. In this study it is assumed that a typical sub-critical, 575 MW, coal firing power plant is converted to oxy-fuel combustion. The flue gases from that power plant are then used as raw material for fuel production. The aim of the study is to estimate the optimal conceptual design of a power generation plant, including liquid/gaseous fuel generation facility. In the present study we used a series of special models for simulating the heat balance, heat transfer, performance and emissions of an oxy-fuel converted utility boiler. We also employed cycle simulation software that facilitates the optimization of an electricity generation plant with CO2 conversion to liquid fuel and usage of the fuel produced from CO2 for additional electricity production. The simulation results show that the amount of fuel produced, additional power generated and power station self consumption may be changed over a wide range, depending on the size of the solar field, which provides the energy for the liquid fuel production. The paper includes an overview of some of the key technical considerations of the new concept of CO2 conversion to fuel. Based on the obtained results it may be concluded that the methodology presented in this study is an attractive option for CO2 emission reduction, which can be implemented in existing and/or new power generation units. The technology proposed in this paper is not indented as an alternative for replacing coal combustion with natural gas, however may be used effectively with oxy-fuel combustion of either coal or natural gas.

Evaluation of energy generation in Iraqi territory by solar photovoltaic power plants with a capacity of 20 MW

2022 ◽  
Vol 0 (0) ◽  
Author(s):  
Qusay Hassan ◽  
Saadoon Abdul Hafedh ◽  
Ali Hasan ◽  
Marek Jaszczur
Keyword(s):  
Experimental Data ◽  
Wind Speed ◽  
Power Plant ◽  
Ambient Temperature ◽  
Solar Irradiance ◽  
Electricity Generation ◽  
Power Plants ◽  
Solar Photovoltaic ◽  
Photovoltaic Power ◽  
Plant Capacity

Abstract The study evaluates the visibility of solar photovoltaic power plant construction for electricity generation based on a 20 MW capacity. The assessment was performed for four main cities in Iraq by using hourly experimental weather data (solar irradiance, wind speed, and ambient temperature). The experimental data was measured for the period from 1st January to 31st December of the year 2019, where the simulation process was performed at a 1 h time step resolution at the same resolution as the experimental data. There are two positionings considered for solar photovoltaic modules: (i) annual optimum tilt angle and (ii) two-axis tracking system. The effect of the ambient temperature and wind on the overall system energy generated was taken into consideration. The study is targeted at evaluating the potential solar energy in Iraq and the viability of electricity generation using a 20 MW solar photovoltaic power plant. The results showed that the overall performance of the suggested power plant capacity is highly dependent on the solar irradiance intensity and the ambient temperature with wind speed. The current 20 MW solar photovoltaic power plant capacity shows the highest energy that can be generated in the mid-western region and the lowest in the northeast regions. The greatest influence of the ambient temperature on the energy genrated by power plants is observed in the southern regions.

scholarly journals Using adsorption chillers for utilising waste heat from power plants

2019 ◽  
Vol 23 (Suppl. 4) ◽  
pp. 1143-1151 ◽  
Author(s):  
Karol Sztekler ◽  
Wojciech Kalawa ◽  
Sebastian Stefanski ◽  
Jaroslaw Krzywanski ◽  
Karolina Grabowska ◽  
...  
Keyword(s):  
Power Generation ◽  
Energy Efficiency ◽  
Power Plant ◽  
Power Plants ◽  
Waste Heat ◽  
Primary Energy ◽  
Simulation Software ◽  
Coefficient Of Performance ◽  
Low Grade ◽  
Adsorption Chiller

At present, energy efficiency is a very important issue and it is power generation facilities, among others, that have to confront this challenge. The simultaneous production of electricity, heat and cooling, the so-called trigeneration, allows for substantial savings in the chemical energy of fuels. More efficient use of the primary energy contained in fuels translates into tangible earnings for power plants while reductions in the amounts of fuel burned, and of non-renewable resources in particular, certainly have a favorable impact on the natural environment. The main aim of the paper was to investigate the contribution of the use of adsorption chillers to improve the energy efficiency of a conventional power plant through the utilization of combined heat and power waste heat, involving the use of adsorption chillers. An adsorption chiller is an item of industrial equipment that is driven by low grade heat and intended to produce chilled water and desalinated water. Nowadays, adsorption chillers exhibit a low coefficient of performance. This type of plant is designed to increase the efficiency of the primary energy use. This objective as well as the conservation of non-renewable energy resources is becoming an increasingly important aspect of the operation of power generation facilities. As part of their project, the authors have modelled the cycle of a conventional heat power plant integrated with an adsorption chiller-based plant. Multi-variant simulation calculations were performed using IPSEpro simulation software.

scholarly journals Effect of Grid Instability on Power Generation System's Reliability

2020 ◽  
pp. 27-37
Author(s):  
Joseph Benedict Bassey ◽  
Isaac F. Odesola
Keyword(s):  
Power Generation ◽  
Power Plant ◽  
Failure Rate ◽  
System Reliability ◽  
Power Distribution ◽  
Power Plants ◽  
Time To Failure ◽  
Generation System ◽  
Reliability Indices ◽  
Mean Time

Aims: Reliability assessment of power generation system may be performed with the concept of system adequacy, security or both. Grid being a major component in the power distribution chain is seen to have some influence on the state of the generation system reliability because of the perturbation that may arise from it. In this study, the generation system reliability is evaluated using both the system adequacy and security concept. Study Design: To capture the system security problems attributed to grid disturbance, the generation system is structured into two component systems (1 - generation component and 2 - transmission component) with a series arrangement. Methodology: The reliability indices such as, mean time to failure, mean time to repair, failure rate and repair rate are assessed on component bases and with respect to the entire generation system. Results: The effect of failure rate of the transmission component on the entire generation system failure rate was evaluated as 66.25%, 55.55%, 33.33%, 55.00% and 35.72% in year 2013, 2014, 2017 2018 and 2019 respectively for FIPL Power Plant and 52.94%, 82.35%, 61.38% and 100% effect was evaluated in the year 2016, 2017, 2018 and 2019 respectively for GT5 of Omoku Power Plant. Conclusion: These results showed that there is a significant influence of grid disturbances on the reliability state of the two gas turbine power plants in Nigeria. Measures on possible reliability state improvement of the power generation systems were suggested to include training and retraining of technical personnel on the management of major equipment in the generation and transmission stations. 

scholarly journals A Project To Estimate The Power Capacity Of Geothermal Power Plants Based On The Enthalpy Of Geothermal Fluid And Plant Design

2021 ◽  
Author(s):  
Obumneme Oken
Keyword(s):  
Power Plant ◽  
Geothermal Energy ◽  
Electricity Generation ◽  
Power Plants ◽  
Hot Water ◽  
Power Capacity ◽  
Geothermal Fluid ◽  
Direct Heating ◽  
Single Flash ◽  
Geothermal Power

Nigeria has some surface phenomena that indicate the presence of viable geothermal energy. None of these locations have been explored extensively to determine the feasibility of sustainable geothermal energy development for electricity generation or direct heating. In this context, the present study aims to provide insight into the energy potential of such development based on the enthalpy estimation of geothermal reservoirs. This particular project was conducted to determine the amount of energy that can be gotten from a geothermal reservoir for electricity generation and direct heating based on the estimated enthalpy of the geothermal fluid. The process route chosen for this project is the single-flash geothermal power plant because of the temperature (180℃) and unique property of the geothermal fluid (a mixture of hot water and steam that exists as a liquid under high pressure). The Ikogosi warm spring in Ekiti State, Nigeria was chosen as the site location for this power plant. To support food security efforts in Africa, this project proposes the cascading of a hot water stream from the flash tank to serve direct heat purposes in agriculture for food preservation, before re-injection to the reservoir. The flowrate of the geothermal fluid to the flash separator was chosen as 3125 tonnes/hr. The power output from a single well using a single flash geothermal plant was evaluated to be 11.3 MW*. This result was obtained by applying basic thermodynamic principles, including material balance, energy balance, and enthalpy calculations. This particular project is a prelude to a robust model that will accurately determine the power capacity of geothermal power plants based on the enthalpy of fluid and different plant designs.

Sustainability assessment of gas based power generation using a life cycle assessment approach

2018 ◽  
Vol 29 (5) ◽  
pp. 826-841 ◽  
Author(s):  
Binita Shah ◽  
Seema Unnikrishnan
Keyword(s):  
Power Generation ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Power Plant ◽  
Natural Gas ◽  
Environmental Impacts ◽  
Electricity Generation ◽  
Lca Methodology ◽  
Iso 14040 ◽  
Content Type

Purpose India is a developing economy along with an increasing population estimated to be the largest populated country in about seven years. Simultaneously, its power consumption is projected to increase more than double by 2020. Currently, the dependence on coal is relatively high, making it the largest global greenhouse gas emitting sector which is a matter of great concern. The purpose of this paper is to evaluate the environmental impacts of the natural gas electricity generation in India and propose a model using a life cycle assessment (LCA) approach. Design/methodology/approach LCA is used as a tool to evaluate the environmental impact of the natural gas combined cycle (NGCC) power plant, as it adopts a holistic approach towards the whole process. The LCA methodology used in this study follows the ISO 14040 and 14044 standards (ISO 14040: 2009; ISO 14044: 2009). A questionnaire was designed for data collection and validated by expert review primary data for the annual environmental emission was collected by personally visiting the power plant. The study follows a cradle to gate assessment using the CML (2001) methodology. Findings The analysis reveals that the main impacts were during the process of combustion. The Global warming potential is approximately 0.50 kg CO2 equivalents per kWh of electricity generation from this gas-based power plant. These results can be used by stakeholders, experts and members who are authorised to probe positive initiative for the reduction of environmental impacts from the power generation sector. Practical implications Considering the pace of growth of economic development of India, it is the need of the hour to emphasise on the patterns of sustainable energy generation which is an important subject to be addressed considering India’s ratification to the Paris Climate Change Agreement. This paper analyzes the environmental impacts of gas-based electricity generation. Originality/value Presenting this case study is an opportunity to get a glimpse of the challenges associated with gas-based electricity generation in India. It gives a direction and helps us to better understand the right spot which require efforts for the improvement of sustainable energy generation processes, by taking appropriate measures for emission reduction. This paper also proposes a model for gas-based electricity generation in India. It has been developed following an LCA approach. As far as we aware, this is the first study which proposes an LCA model for gas-based electricity generation in India. The model is developed in line with the LCA methodology and focusses on the impact categories specific for gas-based electricity generation.

scholarly journals Pengaruh Ketinggian Dan Panjang Saluran Air Laut Terhadap Daya Yang Dihasilkan Pada Prototype Tidal Barrage

2021 ◽  
Vol 2 (2) ◽  
Author(s):  
Bima Sakti ◽  
Nur Rani Alham ◽  
Ahmad Nur Fajri ◽  
Ilham Rizal Ma’rif
Keyword(s):  
Power Plant ◽  
Electricity Generation ◽  
Power Plants ◽  
Sea Water ◽  
Electrical Energy ◽  
Limited Resources ◽  
Natural Ecosystem ◽  
Tidal Power ◽  
Water Turbine ◽  
Water Turbines

<em>The need for electricity in Indonesia is very important considering the limited resources and the lack of manpower, making Indonesia desperately need to increase electricity generation. One source of energy that can be converted into electrical energy is tidal barrage using the tidal barrage method. The application of this energy is still very small in Indonesia but there are a number of areas that have the potential to be implemented by the power plant. Tidal power plants that utilize the potential energy contained in the differences in tides and tides of sea water by trapping water in dams and then moving water turbines and when the water turbine is connected to a generator can produce electrical energy. Related to how the output of the generated power can it is known by looking at what height the water level drives the turbine. This type of power plant is environmentally friendly because it does not damage the natural ecosystem and the dam can be used for various activities.</em><em></em>

Thermo-Economic Assessment Under Electrical Market Uncertainties of a Combined Cycle Gas Turbine Integrated With a Flue Gas-Condensing Heat Pump

2020 ◽  
Author(s):  
Alberto Vannoni ◽  
Andrea Giugno ◽  
Alessandro Sorce
Keyword(s):  
Power Plant ◽  
Power Systems ◽  
Gas Turbine ◽  
Heat Pump ◽  
Flue Gas ◽  
Power Plants ◽  
Greenhouse Gas Emission ◽  
Capital Expenditure ◽  
Combined Cycle ◽  
Gas Turbine Power Plant

Abstract Renewable energy penetration is growing, due to the target of greenhouse-gas-emission reduction, even though fossil fuel-based technologies are still necessary in the current energy market scenario to provide reliable back-up power to stabilize the grid. Nevertheless, currently, an investment in such a kind of power plant might not be profitable enough, since some energy policies have led to a general decrease of both the average price of electricity and its variability; moreover, in several countries negative prices are reached on some sunny or windy days. Within this context, Combined Heat and Power systems appear not just as a fuel-efficient way to fulfill local thermal demand, but also as a sustainable way to maintain installed capacity able to support electricity grid reliability. Innovative solutions to increase both the efficiency and flexibility of those power plants, as well as careful evaluations of the economic context, are essential to ensure the sustainability of the economic investment in a fast-paced changing energy field. This study aims to evaluate the economic viability and environmental impact of an integrated solution of a cogenerative combined cycle gas turbine power plant with a flue gas condensing heat pump. Considering capital expenditure, heat demand, electricity price and its fluctuations during the whole system life, the sustainability of the investment is evaluated taking into account the uncertainties of economic scenarios and benchmarked against the integration of a cogenerative combined cycle gas turbine power plant with a Heat-Only Boiler.

scholarly journals Thermal and Economic Analysis of Multi-Effect Concentration System by Utilizing Waste Heat of Flue Gas for Magnesium Desulfurization Wastewater

Energies ◽  
2020 ◽  
Vol 13 (20) ◽  
pp. 5384 ◽  
Author(s):  
Mingwei Yan ◽  
Yuetao Shi
Keyword(s):  
Wastewater Treatment ◽  
Power Plant ◽  
Economic Analysis ◽  
Magnesium Sulfate ◽  
Flue Gas ◽  
Power Plants ◽  
Waste Heat ◽  
Optimization System ◽  
Benchmark System ◽  
Better Than

Compared with limestone-based wet flue gas desulfurization (WFGD), magnesia-based WFGD has many advantages, but it is not popular in China, due to the lack of good wastewater treatment schemes. This paper proposes the wastewater treatment scheme of selling magnesium sulfate concentrate, and makes thermal and economic analysis for different concentration systems in the scheme. Comparisons of different concentration systems for 300 MW power plant were made to determine which system is the best. The results show that the parallel-feed benchmark system is better than the forward-feed benchmark system, and the parallel-feed optimization system with the 7-process is better than other parallel-feed optimization systems. Analyses of the parallel-feed optimization system with 7-process were made in 300, 600, and 1000 MW power plants. The results show that the annual profit of concentration system for a 300, 600, and 1000 MW power plant is about 2.58 million, 5.35 million, and 7.89 million Chinese Yuan (CNY), respectively. In different concentration systems of the scheme for selling magnesium sulfate concentrate, the parallel-feed optimization system with the 7-process has the best performance. The scheme can make a good profit in 300, 600, and 1000 MW power plants, and it is very helpful for promoting magnesia-based WFGD in China.

Analysis on Distribution Law of Damaged Filters for Bag Dedusters in Coal-Fired Power Plants

2013 ◽  
Vol 690-693 ◽  
pp. 1069-1073
Author(s):  
Ying Shuai Zhang ◽  
Ming Feng Xu ◽  
Hui Shen ◽  
Yun Yi Tao
Keyword(s):  
Power Plant ◽  
Flue Gas ◽  
Power Plants ◽  
Nonuniform Distribution ◽  
Distribution Law ◽  
Operation Optimization ◽  
Improvement Measure

Operating for 1.5 years, part of filtering bags for bag dedusters in a coal-fired power plant had severely decreased intensity and were generally broken. These disabled bags were mainly at the middle and tail of dedusters. By analysis, the reason of the ineffectual filtering bags is oxidation corrosion and more flue gas passing through, owing to the nonuniform distribution of gas. As an improvement measure, such methods are needed as operation optimization, installing de-nitrification system and adding gas uniform plate in dedusters.

Status of and experience with NOx reduction in coal-fired power plants

1997 ◽  
Vol 211 (1) ◽  
pp. 27-41 ◽  
Author(s):  
M Stöhr ◽  
H Schütz ◽  
H Krüger
Keyword(s):  
Air Quality ◽  
Power Plant ◽  
Environmental Impact ◽  
Flue Gas ◽  
Power Plants ◽  
Nox Reduction ◽  
Small Power

Power plant operators in Germany, Europe and other countries are reducing flue gas NOx emissions of large and small power plants to meet air quality regulations for the population and the environment. Beginning with the environmental impact, the use of different techniques for NOx reduction and experience with these techniques is given.

Sign in / Sign up

Export Citation Format

Share Document