Evaluation of Bacteriophage Cocktails Alone and in Combination with Daptomycin Against Daptomycin-Nonsusceptible Enterococcus faecium

2021 ◽  
Author(s):  
Taylor Morrisette ◽  
Katherine L. Lev ◽  
Gregory S. Canfield ◽  
Breck A. Duerkop ◽  
Razieh Kebriaei ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Antibiotic Therapy ◽  
Enterococcus Faecium ◽  
Multidrug Resistant ◽  
Whole Genome ◽  
Transmission Electron ◽  
Phage Cocktail ◽  
Genome Analyses ◽  
Time Kill

Enterococcus faecium ( E. fcm ) is a significant multidrug-resistant pathogen. Bacteriophage cocktails are being proposed to complement antibiotic therapy. After a screen of 8 E. fcm strains against 4 phages, two phages(113, 9184) with the broadest host ranges were chosen for further experiments. Transmission electron microscopy, whole-genome sequencing, comparative genome analyses, and time-kill analyses were performed. Daptomycin(DAP) plus phage cocktail(113:myophage;9184:siphopage) showed bactericidal activity in most regimens, while DAP addition prevented phage 9184 resistance against daptomycin non-susceptible E. fcm .

Repositioning rafoxanide to treat Gram-negative bacilli infections

2020 ◽  
Vol 75 (7) ◽  
pp. 1895-1905 ◽  
Author(s):  
Andrea Miró-Canturri ◽  
Rafael Ayerbe-Algaba ◽  
Ángel Rodríguez Villodres ◽  
Jerónimo Pachón ◽  
Younes Smani
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Morphological Changes ◽  
Gram Negative ◽  
Sepsis Model ◽  
Transmission Electron ◽  
Kill Curve ◽  
Time Kill

Abstract Objectives Repurposing drugs provides a new approach to the fight against MDR Gram-negative bacilli (MDR-GNB). Rafoxanide, a veterinary antihelminthic drug, has shown antibacterial activity in vitro against Gram-positive bacteria. We aimed to analyse the in vitro and in vivo efficacy of rafoxanide in combination with colistin against colistin-susceptible (Col-S) and colistin-resistant (Col-R) GNB. Methods A collection of Col-S and Col-R Acinetobacter baumannii, Pseudomonas aeruginosa and Klebsiella pneumoniae were used. Chequerboard and time–kill curve analyses were performed to determine the synergy between rafoxanide and colistin. Changes in membrane structure and permeability were analysed using transmission electron microscopy and fluorescence assays. A murine peritoneal sepsis model using Col-R strains of these pathogens was performed to study the efficacy of rafoxanide (10 mg/kg/24 h, IV), colistimethate sodium (CMS) (20 mg/kg/8 h, intraperitoneally) and rafoxanide (10 mg/kg/24 h, IV) plus CMS (20 mg/kg/8 h, intraperitoneally) for 72 h. Results Rafoxanide showed MICs ≥256 mg/L for all Col-S and Col-R strains. Chequerboard and time–kill curve analyses showed that rafoxanide (1 mg/L) is more synergistic with colistin against Col-R than Col-S strains. Col-R, but not Col-S, strains treated with rafoxanide demonstrated higher membrane permeabilization. Transmission electron microscopy visualization confirmed that Col-R strains suffer morphological changes. In the murine peritoneal sepsis model with Col-R strains, rafoxanide plus CMS, compared with CMS alone, increased mouse survival to 53.8% and 73.3%, and reduced bacterial loads in tissues and blood between 2.34 and 4.99 log10 cfu/g or mL, respectively. Conclusions Rafoxanide repurposing, as monotherapy and in combination with CMS, may address the urgent need for new treatments for infections caused by MDR-GNB.

scholarly journals Bioactivity and the First Transmission Electron Microscopy Immunogold Studies of ShortDe Novo-Designed Antimicrobial Peptides

2011 ◽  
Vol 55 (5) ◽  
pp. 2137-2145 ◽  
Author(s):  
Marisa Ann Azad ◽  
Heidi Esther Katrina Huttunen-Hennelly ◽  
Cynthia Ross Friedman
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Mechanism Of Action ◽  
Design Principle ◽  
Multidrug Resistant ◽  
Order Structure ◽  
Helical Structures ◽  
Membrane Deformation ◽  
Microbial Drug Resistance ◽  
Transmission Electron

ABSTRACTIn light of the era of microbial drug resistance, the current study aimed to better understand the relationships between sequence, higher-order structure, and mechanism of action for five designed peptides against multidrug-resistant (MDR) pathogens. All peptides studied were 15 residues long, were polycationic, adopted alpha-helical structures within hydrophobic environments (excluding thed-amino acid-substituted peptide MA-d), and contained N-terminal glycine residues, a novel antimicrobial peptide (AMP) design principle. Increasing hydrophobicity enhanced MICs (≤500 μg/ml to ≤7.4 μg/ml) without significantly increasing hemolytic activity (18% maximum hemolysis at 3,400 μg/ml). To the best of our knowledge, this is the first study to have successfully adapted and used a transmission electron microscopy (TEM) immunogold method to investigate the mechanism of action of short (∼15 residues long) AMPs within bacteria. We propose a “floodgate” mechanism to possibly explain membrane deformation and the relative absence of membrane-associated peptides 10 h into incubation.

Techniques for Transmission Electron Microscopy of Fiber-Matrix Interfaces in Aluminum Alloy-Boron Composites by Ion Erosio

1971 ◽  
Vol 29 ◽  
pp. 204-205
Author(s):  
G. G. Shaw
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Aluminum Alloy ◽  
Electron Beam ◽  
Pure Aluminum ◽  
Ion Milling ◽  
Transmission Electron ◽  
Fiber Matrix ◽  
Ion Erosion ◽  
Row Of Fibers

The morphology and composition of the fiber-matrix interface can best be studied by transmission electron microscopy and electron diffraction. For some composites satisfactory samples can be prepared by electropolishing. For others such as aluminum alloy-boron composites ion erosion is necessary.When one wishes to examine a specimen with the electron beam perpendicular to the fiber, preparation is as follows: A 1/8 in. disk is cut from the sample with a cylindrical tool by spark machining. Thin slices, 5 mils thick, containing one row of fibers, are then, spark-machined from the disk. After spark machining, the slice is carefully polished with diamond paste until the row of fibers is exposed on each side, as shown in Figure 1.In the case where examination is desired with the electron beam parallel to the fiber, preparation is as follows: Experimental composites are usually 50 mils or less in thickness so an auxiliary holder is necessary during ion milling and for easy transfer to the electron microscope. This holder is pure aluminum sheet, 3 mils thick.

Direct Observation of Heat Exchanger Deposits by Cross Sectioning

1967 ◽  
Vol 25 ◽  
pp. 364-365
Author(s):  
R. W. Anderson ◽  
D. L. Senecal
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Heat Exchanger ◽  
Direct Observation ◽  
Cross Sections ◽  
Preparation Method ◽  
Specimen Preparation ◽  
Flowing Water ◽  
Transmission Electron ◽  
Deposit Layer

A problem was presented to observe the packing densities of deposits of sub-micron corrosion product particles. The deposits were 5-100 mils thick and had formed on the inside surfaces of 3/8 inch diameter Zircaloy-2 heat exchanger tubes. The particles were iron oxides deposited from flowing water and consequently were only weakly bonded. Particular care was required during handling to preserve the original formations of the deposits. The specimen preparation method described below allowed direct observation of cross sections of the deposit layers by transmission electron microscopy.The specimens were short sections of the tubes (about 3 inches long) that were carefully cut from the systems. The insides of the tube sections were first coated with a thin layer of a fluid epoxy resin by dipping. This coating served to impregnate the deposit layer as well as to protect the layer if subsequent handling were required.

Phase Transformations in Ti-7w/oMo-3w/oMe Alloy

1974 ◽  
Vol 32 ◽  
pp. 514-515
Author(s):  
S. Fujishiro
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Transmission Electron Microscopy ◽  
Tensile Strength ◽  
Mechanical Processing ◽  
Ray Method ◽  
X Ray ◽  
Transmission Electron ◽  
Water Quench ◽  
Alpha Beta

The mechanical properties of three titanium alloys (Ti-7Mo-3Al, Ti-7Mo- 3Cu and Ti-7Mo-3Ta) were evaluated as function of: 1) Solutionizing in the beta field and aging, 2) Thermal Mechanical Processing in the beta field and aging, 3) Solutionizing in the alpha + beta field and aging. The samples were isothermally aged in the temperature range 300° to 700*C for 4 to 24 hours, followed by a water quench. Transmission electron microscopy and X-ray method were used to identify the phase formed. All three alloys solutionized at 1050°C (beta field) transformed to martensitic alpha (alpha prime) upon being water quenched. Despite this heavily strained alpha prime, which is characterized by microtwins the tensile strength of the as-quenched alloys is relatively low and the elongation is as high as 30%.

Two- or three-way observations of the identical cell elements within the same sections by LM, TEM and/or SEM

1978 ◽  
Vol 36 (2) ◽  
pp. 82-83 ◽  
Author(s):  
Nakazo Watari ◽  
Yasuaki Hotta ◽  
Yoshio Mabuchi
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Fine Structure ◽  
Light Microscopy ◽  
Thin Sections ◽  
Transmission Electron ◽  
Identical Cell ◽  
Electron Microscopes ◽  
Scanning Electron

It is very useful if we can observe the identical cell elements within the same sections by light microscopy (LM), transmission electron microscopy (TEM) and/or scanning electron microscopy (SEM) sequentially, because, the cell fine structure can not be indicated by LM, while the color is; on the other hand, the cell fine structure can be very easily observed by EM, although its color properties may not. However, there is one problem in that LM requires thick sections of over 1 μm, while EM needs very thin sections of under 100 nm. Recently, we have developed a new method to observe the same cell elements within the same plastic sections using both light and transmission (conventional or high-voltage) electron microscopes.In this paper, we have developed two new observation methods for the identical cell elements within the same sections, both plastic-embedded and paraffin-embedded, using light microscopy, transmission electron microscopy and/or scanning electron microscopy (Fig. 1).

Comparative Microstructures of Ion Milled and Electrochemically Thinned Composite Materials

1974 ◽  
Vol 32 ◽  
pp. 546-547
Author(s):  
R.R. Russell
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Composite Materials ◽  
Great Difficulty ◽  
Ion Milling ◽  
Transmission Electron ◽  
Ion Damage ◽  
Intermetallic Composite

Transmission electron microscopy of metallic/intermetallic composite materials is most challenging since the microscopist typically has great difficulty preparing specimens with uniform electron thin areas in adjacent phases. The application of ion milling for thinning foils from such materials has been quite effective. Although composite specimens prepared by ion milling have yielded much microstructural information, this technique has some inherent drawbacks such as the possible generation of ion damage near sample surfaces.

Maytansine-Induced Mitotic Arrest in Human Lymphoblasts

1977 ◽  
Vol 35 ◽  
pp. 460-461
Author(s):  
Tai-Te Chao ◽  
John Sullivan ◽  
Awtar Krishan
Keyword(s):  
Electron Microscopy ◽  
Cell Cycle ◽  
Transmission Electron Microscopy ◽  
Tubulin Polymerization ◽  
Vinca Alkaloids ◽  
Antimitotic Activity ◽  
Transmission Electron ◽  
Flow Microfluorometry ◽  
Brain Tubulin

Maytansine, a novel ansa macrolide (1), has potent anti-tumor and antimitotic activity (2, 3). It blocks cell cycle traverse in mitosis with resultant accumulation of metaphase cells (4). Inhibition of brain tubulin polymerization in vitro by maytansine has also been reported (3). The C-mitotic effect of this drug is similar to that of the well known Vinca- alkaloids, vinblastine and vincristine. This study was carried out to examine the effects of maytansine on the cell cycle traverse and the fine struc- I ture of human lymphoblasts.Log-phase cultures of CCRF-CEM human lymphoblasts were exposed to maytansine concentrations from 10-6 M to 10-10 M for 18 hrs. Aliquots of cells were removed for cell cycle analysis by flow microfluorometry (FMF) (5) and also processed for transmission electron microscopy (TEM). FMF analysis of cells treated with 10-8 M maytansine showed a reduction in the number of G1 cells and a corresponding build-up of cells with G2/M DNA content.

Tumor Diagnosis

1982 ◽  
Vol 40 ◽  
pp. 262-265
Author(s):  
Bruce Mackay
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Differential Diagnosis ◽  
Light Microscopy ◽  
Clinical Examination ◽  
Ultrastructural Study ◽  
Diagnostic Procedures ◽  
Specific Diagnosis ◽  
Transmission Electron ◽  
Microscopic Diagnosis

The broadest application of transmission electron microscopy (EM) in diagnostic medicine is the identification of tumors that cannot be classified by routine light microscopy. EM is useful in the evaluation of approximately 10% of human neoplasms, but the extent of its contribution varies considerably. It may provide a specific diagnosis that can not be reached by other means, but in contrast, the information obtained from ultrastructural study of some 10% of tumors does not significantly add to that available from light microscopy. Most cases fall somewhere between these two extremes: EM may correct a light microscopic diagnosis, or serve to narrow a differential diagnosis by excluding some of the possibilities considered by light microscopy. It is particularly important to correlate the EM findings with data from light microscopy, clinical examination, and other diagnostic procedures.

Sign in / Sign up

Export Citation Format

Share Document