scholarly journals Supplemental Material: Nonclimatic and extrabasinal processes controlled pedogenesis in paleosols of the Paleocene Nacimiento Formation, New Mexico, USA

2021 ◽  
Author(s):  
Kevin M. Hobbs
Keyword(s):  
New Mexico ◽  
Statistical Analysis ◽  
Analysis Data ◽  
Geochemical Data ◽  
Geochemical Analysis ◽  
X Ray ◽  
Data Tables

Geochemical data tables, X-Ray diffractograms from paleosol B horizon materials, and results of statistical analysis of pedotype and geochemical analysis data.

scholarly journals Supplemental Material: Nonclimatic and extrabasinal processes controlled pedogenesis in paleosols of the Paleocene Nacimiento Formation, New Mexico, USA

2021 ◽  
Author(s):  
Kevin M. Hobbs
Keyword(s):  
New Mexico ◽  
Statistical Analysis ◽  
Analysis Data ◽  
Geochemical Data ◽  
Geochemical Analysis ◽  
X Ray ◽  
Data Tables

Geochemical data tables, X-Ray diffractograms from paleosol B horizon materials, and results of statistical analysis of pedotype and geochemical analysis data.

Compositional data analysis of sedimentological, mineralogical and geochemical data for the evaluation of Austrian loess and loess loam deposits

2020 ◽  
Author(s):  
Heinz Reitner ◽  
Christian Benold ◽  
Peter Filzmoser ◽  
Maria Heinrich ◽  
Gerhard Hobiger ◽  
...  
Keyword(s):  
Information System ◽  
Statistical Analysis ◽  
Raw Materials ◽  
Analysis Data ◽  
Grain Size Analysis ◽  
Geochemical Data ◽  
Size Analysis ◽  
Compositional Data Analysis ◽  
Rock Composition ◽  
Log Ratio

<p>Austrian loess and loess loam deposits represent an important source of raw materials for the heavy clay industry for centuries. Building material quality of loess and loess loam deposits and their suitability for different applications is significantly influenced by their heterogeneous properties. These depend on the geology of the source area, climatic conditions, geomorphological location, stratigraphic position, intensity of weathering and redeposition potential. The description of occurrences, properties and availability of these raw materials is therefore an important prerequisite to meet the industrial quality requirements. A large number of different sub-datasets exist at the Geological Survey of Austria, which comprise grain-size analysis, bulk rock composition, clay mineralogy, and geochemistry data of loess and loess loam. Within our project, these individual data sets underwent a thorough examination and have been merged into a coherent database to enable the joint regional and statistical analysis of the data. By applying a log-ratio approach the compositional nature of the analysis data has been taken into account for multivariate statistical methods. <br>Within our study we focused on the classic Austrian loess regions in the Northern Alpine foreland areas of Upper and Lower Austria and in the Vienna Basin. By transferring the results of the statistical analysis to a Geographic Information System (GIS) these served as the fundamental basis for our categorization of the loess and loess loam occurrences. Taking into account previously published approaches based on soil profile classifications as well as trends and patterns derived from the analysis data, we finally were able to delineate different districts of brick raw materials deposits. These will be made publically accessible to the industry and interested parties as part of the web application of the Austrian Interactive Raw Material Information System IRIS-Online.</p>

Geochemical Analysis of Eight Red Ochres from Western North America

1999 ◽  
Vol 64 (3) ◽  
pp. 517-526 ◽  
Author(s):  
Jon M. Erlandson ◽  
J. D. Robertson ◽  
Christophe Descantes
Keyword(s):  
Native Americans ◽  
North America ◽  
Geochemical Data ◽  
Geochemical Analysis ◽  
Western North America ◽  
Emission Analysis ◽  
X Ray ◽  
Provenance Studies ◽  
Materials Used ◽  
Multiple Samples

In this paper, we report on our examination of the suitability of geochemical provenance studies on red ochre sources from western North America. We report geochemical data derived from PIXE (particle-induced X-ray emission) analysis of eight red ochre sources from California, Oregon, Wyoming, and Alaska. Our preliminary analysis of these red ochres, including multiple samples from one large deposit, suggests that the tested samples vary significantly between sources. It appears likely that the geochemical analysis of red ochres, widely used and traded among Native Americans and other ancient peoples around the world, could expand the range of materials used by archaeologists and other scholars to reconstruct past exchange and interaction systems.

Multivariate Statistical Analysis Regarding the Formulation of Oxicam-Based Pharmaceutical Hydrogels

2017 ◽  
Vol 68 (4) ◽  
pp. 726-731
Author(s):  
Lenuta Maria Suta ◽  
Anca Tudor ◽  
Colette Roxana Sandulovici ◽  
Lavinia Stelea ◽  
Daniel Hadaruga ◽  
...  
Keyword(s):  
Statistical Analysis ◽  
Multivariate Statistical Analysis ◽  
Pharmaceutical Formulations ◽  
Analysis Data ◽  
Multivariate Statistical ◽  
Predictive Variables ◽  
Rapid Release ◽  
Computational Data ◽  
Experimental Protocols ◽  
Formulation Factors

In this paper, it was analysed the influence of formulation factors over obtaining oxicam hydrogels, using the statistical analysis. Data analysis and predictive modeling by multivariate regression offers a large number of possible explanatory/predictive variables. Therefore, variable selection and dimension reduction is a major task for multivariate statistical analysis, especially for multivariate regressions. The statistical analysis and computational data processing of responses obtained from different pharmaceutical formulations, via different experimental protocols, lead to the optimization of the formulation process. It was found that the most suitable pharmaceutical formulations based on oxicams with the possibility of rapid release contained cyclodextrin, in particular 2-hydroxypropyl-b-cyclodextrin.

Statistical Analysis of Atmospheric Flight Gust Loads Analysis Data

1999 ◽  
Author(s):  
J. B. Clark ◽  
M. C. Kim ◽  
A. M. Kabe
Keyword(s):  
Statistical Analysis ◽  
Analysis Data ◽  
Loads Analysis ◽  
Gust Loads

Interaction of tungsten in dry sliding against steel under high density electric current

2019 ◽  
pp. 101-109 ◽  
Author(s):  
M. I. Aleutdinova ◽  
V. V. Fadin ◽  
Yu. P. Mironov
Keyword(s):  
Electrical Contact ◽  
Analysis Data ◽  
Dry Sliding ◽  
Sliding Surface ◽  
X Ray ◽  
Sliding Surfaces ◽  
Quenched Steel ◽  
Sliding Electrical Contact ◽  
A Current ◽  
Tungsten Steel

The possibility of creating a wear-resistant dry sliding electrical contact tungsten/steel was studied. It was shown that tungsten caused severe wear of the quenched steel counterbody due to unlimited plastic flow of its surface layer at a current density up to 150 A/cm2 . This indicated the impossibility of achieving satisfactory characteristics of such a contact. Low electrical conductivity and wear resistance of the contact tungsten/steel were presented in comparison with the known high copper/steel contact characteristics under the same conditions. X-ray phase analysis data of the steel sliding surfaces made it possible to state that the cause of the unsatisfactory sliding of tungsten was the absence of the necessary concentration of FeO oxide on the sliding surface of the steel. 

scholarly journals Hydrochloric Acid Modification and Lead Removal Studies on Naturally Occurring Zeolites from Nevada, New Mexico, and Arizona

Processes ◽  
2021 ◽  
Vol 9 (7) ◽  
pp. 1238
Author(s):  
Garven M. Huntley ◽  
Rudy L. Luck ◽  
Michael E. Mullins ◽  
Nick K. Newberry
Keyword(s):  
New Mexico ◽  
Surface Area ◽  
Bet Surface Area ◽  
Lead Removal ◽  
X Ray Diffraction ◽  
Sem Images ◽  
X Ray ◽  
Naturally Occurring ◽  
27Al Mas Nmr ◽  
Modified Zeolites

Four naturally occurring zeolites were examined to verify their assignments as chabazites AZLB-Ca and AZLB-Na (Bowie, Arizona) and clinoptilolites NM-Ca (Winston, New Mexico) and NV-Na (Ash Meadows, Nevada). Based on powder X-ray diffraction, NM-Ca was discovered to be mostly quartz with some clinoptilolite residues. Treatment with concentrated HCl (12.1 M) acid resulted in AZLB-Ca and AZLB-Na, the chabazite-like species, becoming amorphous, as confirmed by powder X-ray diffraction. In contrast, NM-Ca and NV-Na, which are clinoptilolite-like species, withstood boiling in concentrated HCl acid. This treatment removes calcium, magnesium, sodium, potassium, aluminum, and iron atoms or ions from the framework while leaving the silicon framework intact as confirmed via X-ray fluorescence and diffraction. SEM images on calcined and HCl treated NV-Na were obtained. BET surface area analysis confirmed an increase in surface area for the two zeolites after treatment, NM-Ca 20.0(1) to 111(4) m2/g and NV-Na 19.0(4) to 158(7) m2/g. 29Si and 27Al MAS NMR were performed on the natural and treated NV-Na zeolite, and the data for the natural NV-Na zeolite suggested a Si:Al ratio of 4.33 similar to that determined by X-Ray fluorescence of 4.55. Removal of lead ions from solution decreased from the native NM-Ca, 0.27(14), NV-Na, 1.50(17) meq/g compared to the modified zeolites, 30 min HCl treated NM-Ca 0.06(9) and NV-Na, 0.41(23) meq/g, and also decreased upon K+ ion pretreatment in the HCl modified zeolites.

scholarly journals Statistical analysis of the reproducibility of residual stress measurements in cold extruded parts

2021 ◽  
Author(s):  
Fabian Jaeger ◽  
Alessandro Franceschi ◽  
Holger Hoche ◽  
Peter Groche ◽  
Matthias Oechsner
Keyword(s):  
Residual Stress ◽  
Statistical Analysis ◽  
Stress Measurement ◽  
Industrial Applications ◽  
Cold Extrusion ◽  
X Ray Diffraction ◽  
Forming Process ◽  
X Ray ◽  
Stress States ◽  
Key Aspects

AbstractCold extruded components are characterized by residual stresses, which originate from the experienced manufacturing process. For industrial applications, reproducibility and homogeneity of the final components are key aspects for an optimized quality control. Although striving to obtain identical deformation and surface conditions, fluctuation in the manufacturing parameters and contact shear conditions during the forming process may lead to variations of the spatial residual stress distribution in the final product. This could lead to a dependency of the residual stress measurement results on the relative axial and circumferential position on the sample. An attempt to examine this problem is made by the employment of design of experiments (DoE) methods. A statistical analysis of the residual stress results generated through X-Ray diffraction is performed. Additionally, the ability of cold extrusion processes to generate uniform stress states is analyzed on specimens of austenitic stainless steel 1.4404 and possible correlations with the pre-deformed condition are statistically examined. Moreover, the influence of the coating, consisting of oxalate and a MoS2 based lubricant, on the X-Ray diffraction measurements of the surface is investigated.

Sign in / Sign up

Export Citation Format

Share Document