Relationship between the Degree of Dispersion of Fuel Oil and the Degree of Removal of Hydrogen Sulfide from It

2020 ◽  
Vol 60 (6) ◽  
pp. 716-721
Author(s):  
N. A. Pivovarova ◽  
G. V. Vlasova ◽  
E. S. Akishina ◽  
M. V. Ryzhova
2021 ◽  
Vol 57 (4) ◽  
pp. 630-634
Author(s):  
A. L. Morozov ◽  
A. Yu. Evdakushin ◽  
V. N. Koshelev ◽  
M. V. Giruts ◽  
E. A. Burov

2020 ◽  
Vol 2020 (2) ◽  
pp. 27-32
Author(s):  
Nadezhda Anatolievna Pivovarova ◽  
Ekaterina Sergeevna Akishina ◽  
Marina Vyacheslavovna Ryzhova ◽  
Galina Vladimirovna Vlasova

The article considers the problem of environmental pollution caused by the presence of hydrogen sulfide in fuel oil. Hydrogen sulfide has a negative impact on the human health: a slight degree of poisoning develops within 3-4 hours already at a 100 mg/m3 concentration of hydrogen sulfide in the air. The regulatory documents limit the hydrogen sulfide content in fuel oil. The search for new available methods of cleaning fuel oil from hydrogen sulfide is relevant today. There has been considered one of the alternative methods of hydrogen sulfide removal from fuel oil, namely, ultrasonic treatment. The method allows changing the dispersed composition of fuel oil and intensifying the extraction of the gas phase of hydrogen sulfide. The advantages of ultrasonic treatment include the absence of injected reagents and environmental cleanliness, small size, low energy costs and the possibility of using ultrasound unit at existing refineries due to its compactness. The influence of the ultrasonic unit capacity and flow rate on hydrogen sulfide removal from fuel oil and change of its dispersion composition has been studied. There have been presented the optimal conditions for ultrasonic treatment and described the mechanism of hydrogen sulfide removal by using ultrasonic treatment


2012 ◽  
Vol 47 (6) ◽  
pp. 446-448 ◽  
Author(s):  
T. K. Vetrova ◽  
V. A. Morozov ◽  
V. A. Dorogochinskaya ◽  
V. Romanova ◽  
B. P. Tonkonogov

Author(s):  
Nadezhda A. Pivovarova ◽  
Ekaterina S. Akishina ◽  
Nadezhda T. Berberova ◽  
Elena V. Shinkar

The presence of hydrogen sulfide in fuel oil is a danger, since hydrogen sulfide is concentrated in the gas phase of tanks, vessels and tanks truck that when carrying out operations of drainage-fulness can lead to an excess of its MAC in air and to the creation of explosive mixtures. The concentration of H2S in fuel oil produced at refineries is 20-500 ppm, while its content in commercial fuel is limited to 10 ppm. Analytical methods of definition of concentration of a hydrogen sulfide in oil products are considered. Industrial and promising technologies for reducing H2S in fuel oil, their main merits and demerits are presented. The possibilities of low-energy wave technologies in the refinement of petroleum and oil products and mechanisms of action of ultrasound and constant magnetic field on oil disperse systems are shown. The hydrogen sulfide extracted from fuel oil neither on volumes, nor on concentration can't be used as independent raw materials for processing into elemental sulfur in the Claus process and is a toxic by-product. At the same time, hydrogen sulfide-containing wastes can serve as valuable raw materials for the production of wide range of useful organic compounds (antioxidants, drugs, pesticides, fungicides) in electrochemical processes. In processes of low-tonnage chemistry, electrochemical processes are relevant. As a result of anode or cathode activation of a hydrogen sulfide (alkanethiols) at ambient temperature and atmospheric pressure the thiyl (alkylthiyl) radical is formed. Along with products of a thiolation of organic compounds are formed also mono - di - and the trisulphides having higher biological activity and lower toxiferous in comparison with thiols. The competitiveness of electrosynthesis is very high, it is considered as processes of waste-free production as at the heart of it ecologically focused idea of "green chemistry" is concluded.


Energies ◽  
2020 ◽  
Vol 13 (20) ◽  
pp. 5286
Author(s):  
Valery Meshalkin ◽  
Elena Shinkar ◽  
Nadezhda Berberova ◽  
Nadezhda Pivovarova ◽  
Foat Ismagilov ◽  
...  

A logical-informational model of energy resource-efficient chemical technology for the utilization of hydrogen sulfide and low molecular alkanethiols, which are toxic and difficult to remove sulfur components of residual fuel (fuel oil), is proposed. Based on the IDEF1 methodology and existing knowledge about the technological processes of the demercaptanization of various hydrocarbon raw materials (oils, gas condensates), a scheme for the production of organic sulfur compounds from sulfur waste extracted from fuel oil has been modeled. For a sufficiently complete removal of hydrogen sulfide and low molecular weight alkanethiols, energy- and resource-saving stages of the technological process have been developed, which are implemented by ultrasonic and/or magnetic treatment of fuel oil. It is proposed to use the combined action of two alternative methods of processing fuel oil to increase the efficiency of cleaning fuel oil from sulfur components. For the first time, an approach has been developed to utilize unwanted sulfuric impurities contained in fuel oil by involving electric and microwave synthesis in green technological processes, to obtain practically useful organic sulfur compounds with biological activity. It is shown that the use of one-electron oxidant thiols and hydrogen sulfide in organic media leads to the synthesis of organic disulfides and elemental sulfur. Indirect (with the use of mediators) electrosynthesis contributes to the cyclic conduct of the technological process, an increase in efficiency and a decrease in energy consumption compared to the direct (on electrodes) initiation of sulfur components.


2021 ◽  
Vol 133 (2) ◽  
pp. 12-15
Author(s):  
O. N. Karatun ◽  
◽  
A. Yu. Morozov ◽  
T. N. Fedulaeva ◽  
E. O. Yakusheva ◽  
...  

The content of hydrogen sulfide in the gas condensate of the Astrakhan gas condensate field, which is the raw material of the Astrakhan gas processing plant (Astrakhan GPP), is about 26% by volume. The high content of sulfur compounds in the reservoir mixture leads to an increased content in the fraction of >350°C, which is obtained during the primary fractionation of stable condensate. The selection of an effective reagent for the absorption of hydrogen sulfide and mercaptans from fuel oil is a very urgent task that is important for the company’s economy. The results of laboratory tests of reagents-neutralizers are the first stage of admission to industrial use at the Astrakhan GPP. This article is devoted to the search for analogs of reagents-neutralizers for reducing hydrogen sulfide and mercaptans in the fuel oil of the Astrakhan GPP.


Author(s):  
J.K. Lampert ◽  
G.S. Koermer ◽  
J.M. Macaoy ◽  
J.M. Chabala ◽  
R. Levi-Setti

We have used high spatial resolution imaging secondary ion mass spectrometry (SIMS) to differentiate mineralogical phases and to investigate chemical segregations in fluidized catalytic cracking (FCC) catalyst particles. The oil industry relies on heterogeneous catalysis using these catalysts to convert heavy hydrocarbon fractions into high quality gasoline and fuel oil components. Catalyst performance is strongly influenced by catalyst microstructure and composition, with different chemical reactions occurring at specific types of sites within the particle. The zeolitic portions of the particle, where the majority of the oil conversion occurs, can be clearly distinguished from the surrounding silica-alumina matrix in analytical SIMS images.The University of Chicago scanning ion microprobe (SIM) employed in this study has been described previously. For these analyses, the instrument was operated with a 40 keV, 10 pA Ga+ primary ion probe focused to a 30 nm FWHM spot. Elemental SIMS maps were obtained from 10×10 μm2 areas in times not exceeding 524s.


2019 ◽  
Vol 133 (20) ◽  
pp. 2045-2059 ◽  
Author(s):  
Da Zhang ◽  
Xiuli Wang ◽  
Siyao Chen ◽  
Selena Chen ◽  
Wen Yu ◽  
...  

Abstract Background: Pulmonary artery endothelial cell (PAEC) inflammation is a critical event in the development of pulmonary arterial hypertension (PAH). However, the pathogenesis of PAEC inflammation remains unclear. Methods: Purified recombinant human inhibitor of κB kinase subunit β (IKKβ) protein, human PAECs and monocrotaline-induced pulmonary hypertensive rats were employed in the study. Site-directed mutagenesis, gene knockdown or overexpression were conducted to manipulate the expression or activity of a target protein. Results: We showed that hydrogen sulfide (H2S) inhibited IKKβ activation in the cell model of human PAEC inflammation induced by monocrotaline pyrrole-stimulation or knockdown of cystathionine γ-lyase (CSE), an H2S generating enzyme. Mechanistically, H2S was proved to inhibit IKKβ activity directly via sulfhydrating IKKβ at cysteinyl residue 179 (C179) in purified recombinant IKKβ protein in vitro, whereas thiol reductant dithiothreitol (DTT) reversed H2S-induced IKKβ inactivation. Furthermore, to demonstrate the significance of IKKβ sulfhydration by H2S in the development of PAEC inflammation, we mutated C179 to serine (C179S) in IKKβ. In purified IKKβ protein, C179S mutation of IKKβ abolished H2S-induced IKKβ sulfhydration and the subsequent IKKβ inactivation. In human PAECs, C179S mutation of IKKβ blocked H2S-inhibited IKKβ activation and PAEC inflammatory response. In pulmonary hypertensive rats, C179S mutation of IKKβ abolished the inhibitory effect of H2S on IKKβ activation and pulmonary vascular inflammation and remodeling. Conclusion: Collectively, our in vivo and in vitro findings demonstrated, for the first time, that endogenous H2S directly inactivated IKKβ via sulfhydrating IKKβ at Cys179 to inhibit nuclear factor-κB (NF-κB) pathway activation and thereby control PAEC inflammation in PAH.


1997 ◽  
Vol 9 (6) ◽  
pp. 541-565 ◽  
Author(s):  
Cheryl R. Killingsworth ◽  
Francesca Alessandrini ◽  
G. G. Krishna Murthy ◽  
Paul J. Catalano ◽  
Joseph D. Paulauskis ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document