Artificial neural network based modeling of the coupled effect of sulphate and temperature on the strength of cemented paste backfill

2011 ◽  
Vol 38 (1) ◽  
pp. 100-109 ◽  
Author(s):  
Libardo Orejarena ◽  
Mamadou Fall
Keyword(s):  
Neural Network ◽  
Experimental Data ◽  
Artificial Neural Network ◽  
Design Parameter ◽  
Curing Temperature ◽  
Ann Model ◽  
Large Variability ◽  
Sulphate Content ◽  
Coupled Effect ◽  
Artificial Neural

Among the different options for mine waste management, cemented paste backfills (CPB) have become important in mining operations around the world due to their environmental and economic benefits. The key design parameter of a CPB structure is its mechanical stability, which is commonly evaluated by the uniaxial compressive strength (UCS) of the CPB material. Experimental studies have shown that the sulphate present within the CPB and the curing temperatures can significantly affect the strength of CPBs. The increasing use of CPBs in underground mine operations as well as the subjection of CPBs to a large variability of thermal (curing temperature) and chemical (sulphate content) loads, make it necessary to model and quantify the coupled effect of sulphate and curing temperature on the strength (key design parameter) of CPBs. Therefore, the main objective of this study is to develop a methodological approach and a mathematical model based on an artificial neural network (ANN) to analyze and predict the effect of different amounts of sulphate on the strength of mature CPBs cured at various temperatures. Based on the experimental results of UCS tests from previous studies on various CPBs, the authors have developed an ANN model by using an ANN methodology implemented through MATLAB™. The developed model is validated with experimental data that is not used for the model development. The validation shows good agreement between the predicted and experimental data. The results from the ANN model of this study show that the coupled effect of curing temperature and sulphate significantly affects the strength of CPBs. This effect can be positive (strength increase) or negative (strength decrease) depending on the initial amount of sulphate content, the curing temperature, and type of binder. Furthermore, this study demonstrates that ANN can be used as a valuable tool to evaluate the coupled influence of sulphate and temperature on the strength of CPBs, i.e., it is a suitable tool for the optimization of a CPB mixture.

Using Artificial Neural Network (ANN) for Manipulating Energy Gain of Nansulate Coating

2011 ◽  
Vol 2 (1) ◽  
Author(s):  
Hadi Salehi ◽  
Mosayyeb Amiri ◽  
Morteza Esfandyari
Keyword(s):  
Neural Network ◽  
Experimental Data ◽  
Artificial Neural Network ◽  
Energy Gain ◽  
Operating Conditions ◽  
Maximum Relative Error ◽  
Ann Model ◽  
Wide Range ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

In this work, an extensive experimental data of Nansulate coating from NanoTechInc were applied to develop an artificial neural network (ANN) model. The Levenberg–Marquart algorithm has been used in network training to predict and calculate the energy gain and energy saving of Nansulate coating. By comparing the obtained results from ANN model with experimental data, it was observed that there is more qualitative and quantitative agreement between ANN model values and experimental data results. Furthermore, the developed ANN model shows more accurate prediction over a wide range of operating conditions. Also, maximum relative error of 3% was observed by comparison of experimental and ANN simulation results.

Inverse Analysis of Material Parameters of Multiple Foam Layers Based on Artificial Neural Network

2011 ◽  
Vol 189-193 ◽  
pp. 3313-3316
Author(s):  
Xiao Xiang Su ◽  
Yao Dong Gu ◽  
J.P. Finlay ◽  
I.D. Jenkinson ◽  
Xue Jun Ren
Keyword(s):  
Neural Network ◽  
Experimental Data ◽  
Artificial Neural Network ◽  
Nonlinear Material ◽  
Fe Model ◽  
Ann Model ◽  
Nonlinear Parameters ◽  
Closed Cell ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

Closed cell polymeric foams are widely used in sport and medical equipments. In this study, an artificial neural network (ANN) based inverse finite element (FE) program has been developed and used to predict the nonlinear material properties of EVA foams with multiple layers. A 2-D parametric FE model was developed and validated against experimental data. Systematic data from FE simulations was used to train and validate the ANN model. The accuracy and validity of the ANN method were assessed based on both blind tests and experimental data. Results showed that the proposed artificial neural network model is robust and efficient in predicating the nonlinear parameters of foam materials.

Artificial Neural Network Approach to Predict Mechanical Properties of 301 Austenitic Stainless Steel

2010 ◽  
Vol 658 ◽  
pp. 145-148 ◽  
Author(s):  
Zhi Yu Chen ◽  
De Ning Zou ◽  
Jun Hui Yu ◽  
Ying Han
Keyword(s):  
Neural Network ◽  
Experimental Data ◽  
Mechanical Properties ◽  
Artificial Neural Network ◽  
Stainless Steel ◽  
Austenitic Stainless Steel ◽  
Rolling Reduction ◽  
Ann Model ◽  
Neural Network Approach ◽  
Artificial Neural

In this study, the effect of original thicknesses of plate, the thicknesses of plate after rolling and rolling reduction on the strength in 301 stainless steel was modeled by means of artificial neural network (ANN). The experimental data were collected to obtain training set and testing set. The normalization method was employed for avoiding over-fitting. The optimal ANN method architecture was determined by according to the trial and error procedure. The results of the ANN model were in good agreement with experimental data. As can be seen from the result, we believe that the neural network model can efficiently predict the relationship between mechanical properties and rolling reduction in 301 austenitic stainless steel.

Temperature Rise Prediction of Oil-Air Lubricated Angular Contact Ball Bearings Using Artificial Neural Network

2019 ◽  
Vol 12 (3) ◽  
pp. 248-261
Author(s):  
Baomin Wang ◽  
Xiao Chang
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Temperature Rise ◽  
High Speed ◽  
Ball Bearing ◽  
Influence Factors ◽  
Ball Bearings ◽  
Ann Model ◽  
Angular Contact Ball Bearing ◽  
Artificial Neural

Background: Angular contact ball bearing is an important component of many high-speed rotating mechanical systems. Oil-air lubrication makes it possible for angular contact ball bearing to operate at high speed. So the lubrication state of angular contact ball bearing directly affects the performance of the mechanical systems. However, as bearing rotation speed increases, the temperature rise is still the dominant limiting factor for improving the performance and service life of angular contact ball bearings. Therefore, it is very necessary to predict the temperature rise of angular contact ball bearings lubricated with oil-air. Objective: The purpose of this study is to provide an overview of temperature calculation of bearing from many studies and patents, and propose a new prediction method for temperature rise of angular contact ball bearing. Methods: Based on the artificial neural network and genetic algorithm, a new prediction methodology for bearings temperature rise was proposed which capitalizes on the notion that the temperature rise of oil-air lubricated angular contact ball bearing is generally coupling. The influence factors of temperature rise in high-speed angular contact ball bearings were analyzed through grey relational analysis, and the key influence factors are determined. Combined with Genetic Algorithm (GA), the Artificial Neural Network (ANN) model based on these key influence factors was built up, two groups of experimental data were used to train and validate the ANN model. Results: Compared with the ANN model, the ANN-GA model has shorter training time, higher accuracy and better stability, the output of ANN-GA model shows a good agreement with the experimental data, above 92% of bearing temperature rise under varying conditions can be predicted using the ANNGA model. Conclusion: A new method was proposed to predict the temperature rise of oil-air lubricated angular contact ball bearings based on the artificial neural network and genetic algorithm. The results show that the prediction model has good accuracy, stability and robustness.

scholarly journals Artificial neural network, predictor variables and sensitivity threshold for DNA methylation-based age prediction using blood samples

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Zhonghui Thong ◽  
Jolena Ying Ying Tan ◽  
Eileen Shuzhen Loo ◽  
Yu Wei Phua ◽  
Xavier Liang Shun Chan ◽  
...  
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Regression Model ◽  
Sensitivity Threshold ◽  
Ann Model ◽  
Blood Samples ◽  
Ann Models ◽  
Artificial Neural ◽  
The Impact ◽  
Age Prediction

AbstractRegression models are often used to predict age of an individual based on methylation patterns. Artificial neural network (ANN) however was recently shown to be more accurate for age prediction. Additionally, the impact of ethnicity and sex on our previous regression model have not been studied. Furthermore, there is currently no age prediction study investigating the lower limit of input DNA at the bisulfite treatment stage prior to pyrosequencing. Herein, we evaluated both regression and ANN models, and the impact of ethnicity and sex on age prediction for 333 local blood samples using three loci on the pyrosequencing platform. Subsequently, we trained a one locus-based ANN model to reduce the amount of DNA used. We demonstrated that the ANN model has a higher accuracy of age prediction than the regression model. Additionally, we showed that ethnicity did not affect age prediction among local Chinese, Malays and Indians. Although the predicted age of males were marginally overestimated, sex did not impact the accuracy of age prediction. Lastly, we present a one locus, dual CpG model using 25 ng of input DNA that is sufficient for forensic age prediction. In conclusion, the two ANN models validated would be useful for age prediction to provide forensic intelligence leads.

scholarly journals Estimation of the Hot Swap Circulation Current of a Multiple Parallel Lithium Battery System with an Artificial Neural Network Model

Electronics ◽  
2021 ◽  
Vol 10 (12) ◽  
pp. 1448
Author(s):  
Nam-Gyu Lim ◽  
Jae-Yeol Kim ◽  
Seongjun Lee
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Lithium Battery ◽  
Battery Pack ◽  
Battery Management ◽  
Ann Model ◽  
Battery System ◽  
Load Current ◽  
Circulating Current ◽  
Artificial Neural

Battery applications, such as electric vehicles, electric propulsion ships, and energy storage systems, are developing rapidly, and battery management issues are gaining attention. In this application field, a battery system with a high capacity and high power in which numerous battery cells are connected in series and parallel is used. Therefore, research on a battery management system (BMS) to which various algorithms are applied for efficient use and safe operation of batteries is being conducted. In general, maintenance/replacement of multi-series/multiple parallel battery systems is only possible when there is no load current, or the entire system is shut down. However, if the circulating current generated by the voltage difference between the newly added battery and the existing battery pack is less than the allowable current of the system, the new battery can be connected while the system is running, which is called hot swapping. The circulating current generated during the hot-swap operation is determined by the battery’s state of charge (SOC), the parallel configuration of the battery system, temperature, aging, operating point, and differences in the load current. Therefore, since there is a limit to formulating a circulating current that changes in size according to these various conditions, this paper presents a circulating current estimation method, using an artificial neural network (ANN). The ANN model for estimating the hot-swap circulating current is designed for a 1S4P lithium battery pack system, consisting of one series and four parallel cells. The circulating current of the ANN model proposed in this paper is experimentally verified to be able to estimate the actual value within a 6% error range.

Modeling of lime production process using artificial neural network

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Abolghasem Daeichian ◽  
Rana Shahramfar ◽  
Elham Heidari
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Production Process ◽  
High Energy ◽  
Ann Model ◽  
Artificial Neural ◽  
Rotary Kilns ◽  
Input Variables ◽  
Artificial Neural Network Ann ◽  
Lime Production

Abstract Lime is a significant material in many industrial processes, including steelmaking by blast furnace. Lime production through rotary kilns is a standard method in industries, yet it has depreciation, high energy consumption, and environmental pollution. A model of the lime production process can help to not only increase our knowledge and awareness but also can help reduce its disadvantages. This paper presents a black-box model by Artificial Neural Network (ANN) for the lime production process considering pre-heater, rotary kiln, and cooler parameters. To this end, actual data are collected from Zobahan Isfahan Steel Company, Iran, which consists of 746 data obtained in a duration of one year. The proposed model considers 23 input variables, predicting the amount of produced lime as an output variable. The ANN parameters such as number of hidden layers, number of neurons in each layer, activation functions, and training algorithm are optimized. Then, the sensitivity of the optimum model to the input variables is investigated. Top-three input variables are selected on the basis of one-group sensitivity analysis and their interactions are studied. Finally, an ANN model is developed considering the top-three most effective input variables. The mean square error of the proposed models with 23 and 3 inputs are equal to 0.000693 and 0.004061, respectively, which shows a high prediction capability of the two proposed models.

Sign in / Sign up

Export Citation Format

Share Document