Study of Graphene Growth by Gas-Source Molecular Beam Epitaxy Using Cracked Ethanol: Influence of Gas Flow Rate on Graphitic Material Deposition

2011 ◽  
Vol 50 (6) ◽  
pp. 06GE12 ◽  
Author(s):  
Fumihiko Maeda ◽  
Hiroki Hibino
2000 ◽  
Vol 220 (4) ◽  
pp. 461-465 ◽  
Author(s):  
F. Gao ◽  
D.D. Huang ◽  
J.P. Li ◽  
Y.X. Lin ◽  
M.Y. Kong ◽  
...  

1996 ◽  
Vol 421 ◽  
Author(s):  
W. G. Bi ◽  
X. B. Mei ◽  
K. L. Kavanagh ◽  
C. W. Tu ◽  
E. A. Stach ◽  
...  

AbstractWe report the effects of growth conditions on the strain and crystalline quality of lowtemperature (LT) grown GaP films by gas-source molecular beam epitaxy. At temperatures below 160 °C, poly-crystalline GaP films are always obtained, regardless of the PH3 low rate used, while at temperatures above 160 °C, the material quality is affected by the PH3 flow rate. Contrary to compressively strained LT GaAs, high-resolution X-ray rocking curve measurement indicates a tensile strain of the LT GaP films, which is considered to be due to PGa antisite defects. The strain is found to be affected by the PH3 flow rate, the growth temperature, and post-growth annealing. Contrary to LT GaAs, no P precipitates are observed in cross-sectional transmission electron microscopy.


1992 ◽  
Vol 2 (9) ◽  
pp. 1727-1738 ◽  
Author(s):  
A. Accard ◽  
F. Brillouet ◽  
E. Duda ◽  
B. Fernier ◽  
G. Gelly ◽  
...  

Author(s):  
B.S. Soroka ◽  
V.V. Horupa

Natural gas NG consumption in industry and energy of Ukraine, in recent years falls down as a result of the crisis in the country’s economy, to a certain extent due to the introduction of renewable energy sources along with alternative technologies, while in the utility sector the consumption of fuel gas flow rate enhancing because of an increase the number of consumers. The natural gas is mostly using by domestic purpose for heating of premises and for cooking. These items of the gas utilization in Ukraine are already exceeding the NG consumption in industry. Cooking is proceeding directly in the living quarters, those usually do not meet the requirements of the Ukrainian norms DBN for the ventilation procedures. NG use in household gas stoves is of great importance from the standpoint of controlling the emissions of harmful components of combustion products along with maintenance the satisfactory energy efficiency characteristics of NG using. The main environment pollutants when burning the natural gas in gas stoves are including the nitrogen oxides NOx (to a greater extent — highly toxic NO2 component), carbon oxide CO, formaldehyde CH2O as well as hydrocarbons (unburned UHC and polyaromatic PAH). An overview of environmental documents to control CO and NOx emissions in comparison with the proper norms by USA, EU, Russian Federation, Australia and China, has been completed. The modern designs of the burners for gas stoves are considered along with defining the main characteristics: heat power, the natural gas flow rate, diameter of gas orifice, diameter and spacing the firing openings and other parameters. The modern physical and chemical principles of gas combustion by means of atmospheric ejection burners of gas cookers have been analyzed from the standpoints of combustion process stabilization and of ensuring the stability of flares. Among the factors of the firing process destabilization within the framework of analysis above mentioned, the following forms of unstable combustion/flame unstabilities have been considered: flashback, blow out or flame lifting, and the appearance of flame yellow tips. Bibl. 37, Fig. 11, Tab. 7.


Sign in / Sign up

Export Citation Format

Share Document