scholarly journals Perspectives on Low-Temperature Electrolysis and Potential for Renewable Hydrogen at Scale

2019 ◽  
Vol 10 (1) ◽  
pp. 219-239 ◽  
Author(s):  
Katherine Ayers ◽  
Nemanja Danilovic ◽  
Ryan Ouimet ◽  
Marcelo Carmo ◽  
Bryan Pivovar ◽  
...  
Keyword(s):  
Low Temperature ◽  
Hydrogen Generation ◽  
Low Cost ◽  
Operating Cost ◽  
Current Status ◽  
Manufacturing Optimization ◽  
Process Gas ◽  
Free Hydrogen ◽  
Renewable Hydrogen ◽  
Transportation Applications

Hydrogen is an important part of any discussion on sustainability and reduction in emissions across major energy sectors. In addition to being a feedstock and process gas for many industrial processes, hydrogen is emerging as a fuel alternative for transportation applications. Renewable sources of hydrogen are therefore required to increase in capacity. Low-temperature electrolysis of water is currently the most mature method for carbon-free hydrogen generation and is reaching relevant scales to impact the energy landscape. However, costs still need to be reduced to be economical with traditional hydrogen sources. Operating cost reductions are enabled by the recent availability of low-cost sources of renewable energy, and the potential exists for a large reduction in capital cost withmaterial and manufacturing optimization. This article focuses on the current status and development needs by component for the low-temperature electrolysis options.

Popcorn-like aluminum-based powders for instant low-temperature water vapor hydrogen generation

2020 ◽  
pp. 100602
Author(s):  
Xinren Chen ◽  
Cuiping Wang ◽  
Yuheng Liu ◽  
Yansong Shen ◽  
Qijun Zheng ◽  
...  
Keyword(s):  
Water Vapor ◽  
Low Temperature ◽  
Hydrogen Generation ◽  
Temperature Water

scholarly journals Bimetallic Ni-Based Catalysts for CO2 Methanation: A Review

Nanomaterials ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 28
Author(s):  
Anastasios I. Tsiotsias ◽  
Nikolaos D. Charisiou ◽  
Ioannis V. Yentekakis ◽  
Maria A. Goula
Keyword(s):  
Low Temperature ◽  
Noble Metals ◽  
Recent Progress ◽  
Low Cost ◽  
Alloy Formation ◽  
Co2 Methanation ◽  
High Performing ◽  
Mobile Sources ◽  
Low Dispersion ◽  
Made In

CO2 methanation has recently emerged as a process that targets the reduction in anthropogenic CO2 emissions, via the conversion of CO2 captured from point and mobile sources, as well as H2 produced from renewables into CH4. Ni, among the early transition metals, as well as Ru and Rh, among the noble metals, have been known to be among the most active methanation catalysts, with Ni being favoured due to its low cost and high natural abundance. However, insufficient low-temperature activity, low dispersion and reducibility, as well as nanoparticle sintering are some of the main drawbacks when using Ni-based catalysts. Such problems can be partly overcome via the introduction of a second transition metal (e.g., Fe, Co) or a noble metal (e.g., Ru, Rh, Pt, Pd and Re) in Ni-based catalysts. Through Ni-M alloy formation, or the intricate synergy between two adjacent metallic phases, new high-performing and low-cost methanation catalysts can be obtained. This review summarizes and critically discusses recent progress made in the field of bimetallic Ni-M (M = Fe, Co, Cu, Ru, Rh, Pt, Pd, Re)-based catalyst development for the CO2 methanation reaction.

scholarly journals Low-temperature-processed metal oxide electron transport layers for efficient planar perovskite solar cells

Rare Metals ◽  
2021 ◽  
Author(s):  
Jia-Xing Song ◽  
Xin-Xing Yin ◽  
Zai-Fang Li ◽  
Yao-Wen Li
Keyword(s):  
Solar Cells ◽  
Electron Transport ◽  
Low Temperature ◽  
Metal Oxide ◽  
Low Cost ◽  
Perovskite Solar Cells ◽  
Transport Layer ◽  
Electron Transport Layer ◽  
Future Research ◽  
Low Temperature Preparation

Abstract As a promising photovoltaic technology, perovskite solar cells (pero-SCs) have developed rapidly over the past few years and the highest power conversion efficiency is beyond 25%. Nowadays, the planar structure is universally popular in pero-SCs due to the simple processing technology and low-temperature preparation. Electron transport layer (ETL) is verified to play a vital role in the device performance of planar pero-SCs. Particularly, the metal oxide (MO) ETL with low-cost, superb versatility, and excellent optoelectronic properties has been widely studied. This review mainly focuses on recent developments in the use of low-temperature-processed MO ETLs for planar pero-SCs. The optical and electronic properties of widely used MO materials of TiO2, ZnO, and SnO2, as well as the optimizations of these MO ETLs are briefly introduced. The commonly used methods for depositing MO ETLs are also discussed. Then, the applications of different MO ETLs on pero-SCs are reviewed. Finally, the challenge and future research of MO-based ETLs toward practical application of efficient planar pero-SCs are proposed. Graphical abstract

scholarly journals Molecular Engineering for High-Performance Fullerene Broadband Photodetector

2021 ◽  
Author(s):  
Mingming Su ◽  
Yajing Hu ◽  
Ao Yu ◽  
Zhiyao Peng ◽  
Wangtao Long ◽  
...  
Keyword(s):  
Electron Transfer ◽  
Low Temperature ◽  
Electron Acceptor ◽  
Photoinduced Electron Transfer ◽  
High Performance ◽  
Organic Molecules ◽  
Low Cost ◽  
Molecular Engineering ◽  
Temperature Requirement ◽  
High Flexibility

Broadband photodetectors fabricated with organic molecules have the advantages of low cost, high flexibility, easy processing and low-temperature requirement. Fullerene molecules, due to the electron acceptor and photoinduced electron transfer...

scholarly journals Low-temperature combustion of methane over graphene templated Co3O4 defective-nanoplates

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Dian Gong ◽  
Gaofeng Zeng
Keyword(s):  
Low Temperature ◽  
Transition Metal Oxides ◽  
Active Oxygen Species ◽  
Low Cost ◽  
Thermal Reduction ◽  
Low Temperature Combustion ◽  
Solid Catalysts ◽  
Intermittent Feeding ◽  
Co Precipitation ◽  
Catalytic Combustion Of Methane

AbstractTransition metal oxides are the potential catalysts to replace noble-metal based catalyst for the catalytic combustion of methane due to the tolerable reactivity and low cost. However, these catalysts are challenged by the low temperature reactivity. Herein, the surface defective Co3O4 nanoplates are realized through a facile co-precipitation and thermal reduction method with the association of GO. The resultant catalysts (CoGO50) demonstrate a superior low-temperature reactivity for the methane oxidation to CO2 and H2O in comparison with the common Co3O4 catalyst. The reliable stability of CoGO50 catalyst was proved by 80 h testing with intermittent feeding of water vapor. The experimental analysis demonstrates that the presence of a small amount of GO significantly affects the catalysts in surface valence state, active oxygen species and surface oxygen vacancies through reacting with the cobalt oxide as a reductant. Moreover, GO plays as 2D confine template to form smaller and thinner nanoplates. This work provides a facile method to control the surface properties of catalyst not only for Co3O4 based catalysts but also for wider solid catalysts.

MENGGUNAKAN STRATEGY BIAYA RENDAH: SEBUAH KAJIAN LITERATURE

2017 ◽  
Vol 7 (1) ◽  
Author(s):  
Husnaina Husnaina
Keyword(s):  
Low Cost ◽  
Operating Cost ◽  
Low Cost Carrier

Industri penerbangan saat ini menuntut perusahaan agar dapat bersaing secara global. Dan tuntutan akan persaingan di dalam industri penerbangan membuat beberapa perusahaan menerapkan strategi “Low Cost”. Istilah Penerbangan “low cost” atau sering disebut LCC (low cost carrier). LCC sering juga disebut sebagai Budget Airlines atau no frills flight atau juga Discounter Carrier. LCC merupakan model penerbangan yang unik dengan strategi penurunan operating cost. Kata kunci: Strategi biaya rendah, LCC, Industri Penerbangan

Eccentric String Reamer for ECD Reduction in the Depleted Field of Gulf of Thailand GoT

2021 ◽  
Author(s):  
Nichnita Tortrakul ◽  
Chatwit Pochan ◽  
Nardthida Kananithikorn ◽  
Thanapong Siripan ◽  
Basil Ching ◽  
...  
Keyword(s):  
Drilling Fluid ◽  
Low Cost ◽  
Operating Cost ◽  
Cost Effective ◽  
Operational Reliability ◽  
Drill String ◽  
Fluid Loss ◽  
Gulf Of Thailand ◽  
Drilling Depth ◽  
Annular Clearance

Abstract This paper presents a method of reducing equivalent circulating density (ECD) while drilling using eccentric string reamers (ESR) with adjustable gage stabilizer (AGS) in Gulf of Thailand (GoT). Reduced ECD in slimhole is desirable when drilling depleted reservoirs as reduced borehole pressure can reduce or delay drilling fluid loss events. Delaying losses can allow well depth to be increased with the prospect of penetrating otherwise unrealized pay horizons and increasing reserves capture. Several methods of reducing ECD were considered but most solutions included changing drill string and/or casing design specifications with prohibitive cost. A low-cost, low operational-impact solution was needed. Hole-opening is a method of increasing annular clearance, but well delivery requirements of ~4.5 days per well necessitates a one-trip solution without introducing significant ROP reduction or negatively impact bottomhole assembly (BHA) walking tendencies. Further, the preferred solution must be compatible with a high temperature reservoir drilling environment and must not undermine drilling system operational reliability. A simple but controversial tool for hole opening is ESR. ESR’s are simple in that there are no moving parts or cutter blocks to shift, and operating cost is low. They are controversial due to uncertainty that the tool eccentricity and drilling dynamics will successfully open hole to the desired diameter. Given that the intent of this hole-opening application is limited to creating annular clearance for fluid, not mechanical clearance, the eccentric reamer solution was chosen for field trial and potential development. A tool design challenge was to create a reamer geometry with the desired enlargement ratio (6⅛-in. to 6⅞-in.) while drilling, and reliably drift surface equipment and casing without complications. The ESR design must efficiently drill-out cement and float equipment as well as heterogeneous shale/sand/mudstone interbedded formation layers without significant vibration. If successful, the enlarged hole diameter will increase annular clearance, reduce ECD, improve hole cleaning, and allow drilling depth to be increased to capture additional reserves The plug and play functionality of the ESR required no changes to the existing rig site procedures in handling and making up the tool. The ESR drifts the casing and drills cement and shoe track with normal parameters. The ESR is run with standard measurements-while-drilling (MWD)/logging-while-drilling (LWD) AGS BHA and is able to reduce ECD providing the opportunity to drill deeper and increase barrel of oil equivalent (BOE) per each wellbore. Performance analysis has shown no negative effect on drilling performance and BHA walking tendency. The novelty of this ESR application is its proven ability to assist in increasing reserves capture in highly depleted reservoirs. The ESR is performing very efficiently (high ROP) and reliability is outstanding. In this application, the ESR is a very cost-effective and viable solution for slimhole design.

Sign in / Sign up

Export Citation Format

Share Document