Effect of Alkaline Agent with Organic Additive in Colloidal Silica Slurry on Polishing Rate Selectivity of Polysilicon-to-SiO2 in Polysilicon CMP

2019 ◽  
Vol 13 (4) ◽  
pp. 67-73 ◽  
Author(s):  
Hee-Sub Hwang ◽  
Hyun-Goo Kang ◽  
Jin-Hyung Park ◽  
Ungyu Paik ◽  
Hyung-Soon Park ◽  
...  
Keyword(s):  
Colloidal Silica ◽  
Organic Additive ◽  
Alkaline Agent ◽  
Silica Slurry

Effect of Alkaline Agent in Colloidal Silica Slurry for Polycrystalline Silicon Chemical Mechanical Polishing

2007 ◽  
Vol 46 (8A) ◽  
pp. 5089-5094 ◽  
Author(s):  
Myung-Yoon Lee ◽  
Hyun-Goo Kang ◽  
Manabu Kanemoto ◽  
Ungyu Paik ◽  
Jea-Gun Park
Keyword(s):  
Chemical Mechanical Polishing ◽  
Polycrystalline Silicon ◽  
Colloidal Silica ◽  
Mechanical Polishing ◽  
Alkaline Agent ◽  
Silica Slurry

Acid colloidal silica slurry for Cu CMP

2004 ◽  
Vol 40 (1) ◽  
pp. 26
Author(s):  
Nam-Hoon Kim ◽  
Eui-Goo Chang
Keyword(s):  
Colloidal Silica ◽  
Silica Slurry ◽  
Cu Cmp

Effect of Process Parameters on Material Removal Rate in Chemical Mechanical Polishing of 6H-SiC(0001)

2008 ◽  
Vol 600-603 ◽  
pp. 831-834 ◽  
Author(s):  
Joon Ho An ◽  
Gi Sub Lee ◽  
Won Jae Lee ◽  
Byoung Chul Shin ◽  
Jung Doo Seo ◽  
...  
Keyword(s):  
Material Removal Rate ◽  
Chemical Mechanical Polishing ◽  
Material Removal ◽  
Colloidal Silica ◽  
Removal Rate ◽  
Mechanical Polishing ◽  
Diamond Particles ◽  
Average Grain Size ◽  
Silica Slurry ◽  
Sic Wafer

2inch 6H-SiC (0001) wafers were sliced from the ingot grown by a conventional physical vapor transport (PVT) method using an abrasive multi-wire saw. While sliced SiC wafers lapped by a slurry with 1~9㎛ diamond particles had a mean height (Ra) value of 40nm, wafers after the final mechanical polishing using the slurry of 0.1㎛ diamond particles exhibited Ra of 4Å. In this study, we focused on investigation into the effect of the slurry type of chemical mechanical polishing (CMP) on the material removal rate of SiC materials and the change in surface roughness by adding abrasives and oxidizer to conventional KOH-based colloidal silica slurry. The nano-sized diamond slurry (average grain size of 25nm) added in KOH-based colloidal silica slurry resulted in a material removal rate (MRR) of 0.07mg/hr and the Ra of 1.811Å. The addition of oxidizer (NaOCl) in the nano-size diamond and KOH based colloidal silica slurry was proven to improve the CMP characteristics for SiC wafer, having a MRR of 0.3mg/hr and Ra of 1.087Å.

High Throughput SiC Wafer Polishing with Good Surface Morphology

2007 ◽  
Vol 556-557 ◽  
pp. 753-756 ◽  
Author(s):  
Tomohisa Kato ◽  
Keisuke Wada ◽  
Eiji Hozomi ◽  
Hiroyoshi Taniguchi ◽  
Tomonori Miura ◽  
...  
Keyword(s):  
Free Surface ◽  
High Throughput ◽  
Chemical Mechanical Polishing ◽  
Colloidal Silica ◽  
Flat Surface ◽  
Good Surface ◽  
Wafer Polishing ◽  
Silica Slurry ◽  
Sic Wafer ◽  
Afm Observation

We report SiC wafer polishing study to achieve high throughput with extremely flat, smooth and damageless surface. The polishing consists of three process, wafer grinding, lapping and chemical mechanical polishing (CMP), which are completed in shortest about 200 minutes in total for 2 inch wafer. Specimens of 4H- and 6H-SiC were provided from slicing single crystal as wafers oriented (0001) with 0 or 8 degrees offset angle toward to <112 _ 0>. By the first grinding using a diamond whetstone wheel, we realized flat surface on the wafers with small TTV error of 1 μm in 15 minutes. After second process of lapping, the wafers were finished by CMP using colloidal silica slurry. AFM observation showed not only scratch-free surface but also atomic steps on the wafers after CMP. Rms marks extremely flat value of 0.08 nm in 10 μm square area.

Effect of Organic Amine in Colloidal Silica Slurry on Polishing-rate Selectivity of Copper to Tantalum-nitride Film in Copper Chemical Mechanical Planarization

2019 ◽  
Vol 13 (4) ◽  
pp. 51-57 ◽  
Author(s):  
Jin-Hyung Park ◽  
Hao Cui ◽  
Hee-Sub Hwang ◽  
Ungyu Paik ◽  
Hyung-Soon Park ◽  
...  
Keyword(s):  
Colloidal Silica ◽  
Chemical Mechanical Planarization ◽  
Tantalum Nitride ◽  
Nitride Film ◽  
Organic Amine ◽  
Silica Slurry

Effect of diluted colloidal silica slurry mixed with ceria abrasives on CMP characteristic

2016 ◽  
Vol 3 (1) ◽  
pp. 13-17 ◽  
Author(s):  
Youngkyun Lee ◽  
Yong-Jin Seo ◽  
Hojun Lee ◽  
Haedo Jeong
Keyword(s):  
Colloidal Silica ◽  
Silica Slurry

Colloidal Silica based High Selectivity Shallow Trench Isolation (STI) Chemical Mechanical Polishing (CMP) Slurry

2005 ◽  
Vol 867 ◽  
Author(s):  
Kyoung-Ho Bu ◽  
Brij M. Moudgil
Keyword(s):  
Silicon Nitride ◽  
Chemical Mechanical Polishing ◽  
Colloidal Silica ◽  
Sodium Dodecyl ◽  
Mechanical Polishing ◽  
Wafer Surface ◽  
Shallow Trench Isolation ◽  
Pattern Size ◽  
Trench Isolation ◽  
Silica Slurry

AbstractAmong various properties of chemical mechanical polishing (CMP) slurry, selectivity plays a key role in global planarization of high density and small pattern size shallow trench isolation (STI) process. Lack of adequate selectivity can lead to defects such as dishing and erosion. To improve the selectivity of STI CMP process, CMP characteristics of silica and silicon nitride wafer were investigated using colloidal silica slurry as a function of slurry pH. Sodium dodecyl sulfate (SDS), an anionic surfactant, was added to increase the selectivity of the slurry. As a result, selectivity increased from 3 to 25. It was concluded that selective passivation layer formed on silicon nitride wafer surface at acidic slurry pH range was responsible for the observed selectivity increase. Adsorption characteristics of SDS on silica and silicon nitride were measured as a function of slurry pH and concentration of SDS. As indicated by zeta potential behavior under acidic pH conditions, SDS adsorption on silicon nitride was significantly higher han silica due to the electrostatic forces. Significantly higher SDS coating on silicone nitride seems to have resulted in lubrication layer leading to increased polishing selectivity.

Effect of mixing ratio of non-spherical particles in colloidal silica slurry on oxide CMP

2017 ◽  
Vol 18 (10) ◽  
pp. 1333-1338 ◽  
Author(s):  
Hojun Lee ◽  
Dasol Lee ◽  
Moonsung Kim ◽  
Haedo Jeong
Keyword(s):  
Colloidal Silica ◽  
Spherical Particles ◽  
Mixing Ratio ◽  
Silica Slurry

Influences of Organic Additive Molecular Weight in Colloidal-Silica-Based Slurry on Final Polishing Characteristics of Silicon Wafer

2011 ◽  
Vol 159 (2) ◽  
pp. H107-H111 ◽  
Author(s):  
Byeong-Sam Moon ◽  
Hee-Sub Hwang ◽  
Jea-Gun Park
Keyword(s):  
Molecular Weight ◽  
Silicon Wafer ◽  
Colloidal Silica ◽  
Organic Additive
Sign in / Sign up

Export Citation Format

Share Document