Polyvinyl Alcohol-Based Gel Electrolytes with High Water Content for Flexible Zinc-Air Batteries with High Rate Capability

Author(s):  
Zhi-Xiu Lin ◽  
Yi-Ting Lu ◽  
Chi-Yu Lai ◽  
Chi-Chang Hu
2001 ◽  
Vol 26 (5) ◽  
pp. 436-440 ◽  
Author(s):  
M. KOBAYASHI ◽  
J. TOGUCHIDA ◽  
M. OKA

The main problem in tendon repair is adhesion formation between the tendon and surrounding tissue. To prevent this, we have developed adhesion preventive shields using polyvinyl alcohol hydrogel (PVA-H) with 90% water content. This implant experiment used the deep flexor tendon of the 3rd toe of the domestic fowl. Injured tendons shielded with PVA-H healed within about 3 weeks without adhesion to the surrounding tissues. Neither breakage of the PVA-H shield itself nor infection or degeneration in the surrounding tissue was observed. These results show that tendon is capable of intrinsic repair, and was able to regenerate using synovial nutrition through the PVA-H. The high water content of PVA-H may be clinically useful and applicable to adhesion preventive shields for tendon repair.


Insects ◽  
2019 ◽  
Vol 10 (5) ◽  
pp. 138 ◽  
Author(s):  
Zaiyuan Li ◽  
Consolatha Chambi ◽  
Tianhua Du ◽  
Cong Huang ◽  
Fulian Wang ◽  
...  

Bactrocera minax, one of the most devastating citrus pests in Asia, has two developmental stages (mature larva and pupa) that complete their life cycle in the soil. Currently, southern China has a climate with abundant autumn rains, and soil moisture can be a major factor affecting the survival of larvae and pupae of B. minax. In the present study, we evaluated the effects of water immersion and high soil moisture content on the development of mature larvae and pupae of B. minax. When immersed in water for 1 d, 100% of mature larvae of B. minax were knocked out. When larvae were immersed for less than 6 d, however, more than 92% of knocked-out larvae recovered within 24 h. The days of water immersion with 50% and 90% recovery ratios (indicated as RD50 and RD90) were 10.3 d and 6.4 d, respectively. When larvae were immersed less than 6 d, the mortality ratios of larvae were not significantly different from those that were not immersed at all. The days of immersion causing 50% and 90% mortality of larvae (MD50 and MD90, respectively) were 7.6 d and 11.1 d, respectively. The pupation ratios of larvae were also observed to be not significantly different compared to non-immersion, and the days of immersion causing 50% and 90% pupation (PD50 and PD90, respectively) were 6.6 d and 0.8 d, respectively. Larval respiration rates were reduced after water immersion as a strategy for larval survival. High water content was not detrimental to pupae of B. minax. Adult emergence did not significantly decrease in soil with high water content, even though pupae were under those conditions for 161–175 d. The respiration rates of pupae were lower in soil with different moisture levels and were not significantly different, which ensured the survival of pupae in high water content. Reduced respiration rate is a strategy for survival of larvae and pupae, and remarkable tolerance to high moisture conditions could explain the high rate of spread and geographical distribution of B. minax. The results of this study provide a reference for the occurrence and control of B. minax.


2014 ◽  
Vol 2 (27) ◽  
pp. 10508-10515 ◽  
Author(s):  
Yifu Huang ◽  
Mingqiu Zhang ◽  
Wenhong Ruan

Boron-cross-linked graphene oxide/polyvinyl alcohol (B-GO/PVA) hydrogels with high-water-content and excellent mechanical properties are prepared by freeze/thaw and boron cross-linking methods.


1997 ◽  
Vol 6 (6) ◽  
pp. 585-595 ◽  
Author(s):  
Andrew R. Baker ◽  
Ronald L. Fournier ◽  
Jeffrey G. Sarver ◽  
Jennifer L. Long ◽  
Peter J. Goldblatt ◽  
...  

An immunoisolation membrane formed by incorporating a high water content polyvinyl alcohol (PVA) hydrogel into a microporous polyether sulfone (PES) filter has been investigated in this study. The PVA hydrogel is formed in situ within the filter pores via glutaraldehyde (GA) crosslinking under acidic conditions. The tortuous nature of the microporous filter pores securely anchors the embedded hydrogel to provide excellent structural integrity. The high void fraction of the PES filter support (>80%) and high water content of the PVA hydrogel (>85% water by weight) allow excellent solute transport rates, while an appropriate level of glutaraldehyde crosslinking supplies the required molecular size selectivity. In vitro permeability measurements made with solutes covering a wide range of molecular sizes demonstrate high transport rates for small nutrient molecules with rapidly diminishing permeabilities above a molecular weight of approximately 1,000 Dalton. Implantation experiments show that the membrane properties are not deleteriously affected by prolonged in vivo exposure or common sterilization techniques. Thus, this hybrid hydrogel/filter membrane system offers a promising approach to the immunoisolation of implanted cells.


2018 ◽  
Vol 24 (8) ◽  
pp. 843-854 ◽  
Author(s):  
Weiguo Xu ◽  
Shujun Dong ◽  
Yuping Han ◽  
Shuqiang Li ◽  
Yang Liu

Hydrogels, as a class of materials for tissue engineering and drug delivery, have high water content and solid-like mechanical properties. Currently, hydrogels with an antibacterial function are a research hotspot in biomedical field. Many advanced antibacterial hydrogels have been developed, each possessing unique qualities, namely high water swellability, high oxygen permeability, improved biocompatibility, ease of loading and releasing drugs and structural diversity. In this article, an overview is provided on the preparation and applications of various antibacterial hydrogels. Furthermore, the prospects in biomedical researches and clinical applications are predicted.


2019 ◽  
Vol 67 (7) ◽  
pp. 4803-4810 ◽  
Author(s):  
Xiong Wang ◽  
Tao Qin ◽  
Yexian Qin ◽  
Ahmed H. Abdelrahman ◽  
Russell S. Witte ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document