scholarly journals Alignment of sarcoplasmic reticulum-mitochondrial junctions with mitochondrial contact points

2011 ◽  
Vol 301 (5) ◽  
pp. H1907-H1915 ◽  
Author(s):  
Cecília García-Pérez ◽  
Timothy G. Schneider ◽  
György Hajnóczky ◽  
György Csordás
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Sarcoplasmic Reticulum ◽  
Ryanodine Receptor ◽  
Mitochondrial Membrane ◽  
Inner Mitochondrial Membrane ◽  
Mitofusin 2 ◽  
Atp Production ◽  
Contact Points ◽  
Transmission Electron

Propagation of ryanodine receptor (RyR2)-derived Ca2+ signals to the mitochondrial matrix supports oxidative ATP production or facilitates mitochondrial apoptosis in cardiac muscle. Ca2+ transfer likely occurs locally at focal associations of the sarcoplasmic reticulum (SR) and mitochondria, which are secured by tethers. The outer mitochondrial membrane and inner mitochondrial membrane (OMM and IMM, respectively) also form tight focal contacts (contact points) that are enriched in voltage-dependent anion channels, the gates of OMM for Ca2+. Contact points could offer the shortest Ca2+ transfer route to the matrix; however, their alignment with the SR-OMM associations remains unclear. Here, in rat heart we have studied the distribution of mitochondria-associated SR in submitochondrial membrane fractions and evaluated the colocalization of SR-OMM associations with contact points using transmission electron microscopy. In a sucrose gradient designed for OMM purification, biochemical assays revealed lighter fractions enriched in OMM only and heavier fractions containing OMM, IMM, and SR markers. Pure OMM fractions were enriched in mitofusin 2, an ∼80 kDa mitochondrial fusion protein and SR-mitochondrial tether candidate, whereas in fractions of OMM + IMM + SR, a lighter (∼50 kDa) band detected by antibodies raised against the NH2 terminus of mitofusin 2 was dominating. Transmission electron microscopy revealed mandatory presence of contact points at the junctional SR-mitochondrial interface versus a random presence along matching SR-free OMM segments. For each SR-mitochondrial junction at least one tether was attached to contact points. These data establish the contact points as anchorage sites for the SR-mitochondrial physical coupling. Close coupling of the SR, OMM, and IMM is likely to provide a favorable spatial arrangement for local ryanodine receptor-mitochondrial Ca2+ signaling.

Transmission electron microscopy study of barium hexaferrite formation from barium carbonate and hematite

1999 ◽  
Vol 14 (9) ◽  
pp. 3647-3652 ◽  
Author(s):  
Hanns P. Steier ◽  
Joaquin Requena ◽  
José S. Moya
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Barium Carbonate ◽  
Average Particle Size ◽  
Exothermic Reaction ◽  
Barium Hexaferrite ◽  
Microscopy Study ◽  
Average Particle ◽  
Contact Points ◽  
Transmission Electron

The formation of barium hexaferrite from stoichiometric mixtures of BaCO3 and Fe2O3 has been investigated by means of differential thermal analysis and thermogravimetry, x-ray diffraction, and transmission electron microscopy–energy dispersive spectrometry. The first step, which implies decarbonatation and monoferrite formation, includes the formation of various intermediate compounds, which are formed at contact points between BaCO3 and Fe2O3 grains, and implies diffusion of both species. In the second step, barium hexaferrite is formed at interfaces between monoferrite and iron oxide mainly by diffusion of barium through the BF6 lattice into the hematite lattice. This exothermic reaction process leads to nonagglomerated pseudohexagonal platelets with an average particle size very close to the one of the starting powder mixture (∼1 μm).

Biological approaches to characterize the mode of action of two 5-nitroindazolinone prototypes on Trypanosoma cruzi bloodstream trypomastigotes

Parasitology ◽  
2016 ◽  
Vol 143 (11) ◽  
pp. 1469-1478 ◽  
Author(s):  
CRISTINA FONSECA-BERZAL ◽  
CRISTIANE FRANÇA DA SILVA ◽  
RUBEM F. S. MENNA-BARRETO ◽  
MARCOS MEUSER BATISTA ◽  
JOSÉ A. ESCARIO ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Trypanosoma Cruzi ◽  
Mode Of Action ◽  
Mitochondrial Membrane ◽  
Drug Resistant ◽  
Cellular Mechanisms ◽  
Transmission Electron ◽  
Intracellular Vesicles

SUMMARYThe phenotypic activity of two 5-nitroindazolinones, i.e. 2-benzyl-1-propyl (22) and 2-benzyl-1-butyl (24) derivatives, previously proposed as anti-Trypanosoma cruzi prototypes, was presently assayed on bloodstream trypomastigotes (BT) of the moderately drug-resistant Y strain. Further exploration of putative targets and cellular mechanisms involved in their activity was also carried out. Therefore, transmission electron microscopy, high-resolution respirometry and flow cytometry procedures were performed on BT treated for up to 24 h with the respective EC50 value of each derivative. Results demonstrated that although 22 and 24 were not as active as benznidazole in this in vitro assay on BT, both compounds triggered important damages in T. cruzi that lead to the parasite death. Ultrastructural alterations included shedding events, detachment of plasma membrane and nuclear envelope, loss of mitochondrial integrity, besides the occurrence of a large number of intracellular vesicles and profiles of endoplasmic reticulum surrounding cytoplasmic organelles such as mitochondrion. Moreover, both derivatives affected mitochondrion leading to this organelle dysfunction, as reflected by the inhibition in oxygen consumption and the loss of mitochondrial membrane potential. Altogether, the findings exposed in the present study propose autophagic processes and mitochondrial machinery as part of the mode of action of both 5-nitroindazolinones 22 and 24 on T. cruzi trypomastigotes.

scholarly journals Cardiomyocyte mitochondrial oxidative stress and cytoskeletal breakdown in the heart with a primary volume overload

2015 ◽  
Vol 308 (6) ◽  
pp. H651-H663 ◽  
Author(s):  
Danielle M. Yancey ◽  
Jason L. Guichard ◽  
Mustafa I. Ahmed ◽  
Lufang Zhou ◽  
Michael P. Murphy ◽  
...  
Keyword(s):  
Oxidative Stress ◽  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Mitochondrial Membrane ◽  
Volume Overload ◽  
Ros Production ◽  
Isolated Cardiomyocytes ◽  
Transmission Electron ◽  
Cyclical Stretch

Left ventricular (LV) volume overload (VO) results in cardiomyocyte oxidative stress and mitochondrial dysfunction. Because mitochondria are both a source and target of ROS, we hypothesized that the mitochondrially targeted antioxidant mitoubiquinone (MitoQ) will improve cardiomyocyte damage and LV dysfunction in VO. Isolated cardiomyocytes from Sprague-Dawley rats were exposed to stretch in vitro and VO of aortocaval fistula (ACF) in vivo. ACF rats were treated with and without MitoQ. Isolated cardiomyocytes were analyzed after 3 h of cyclical stretch or 8 wk of ACF with MitoSox red or 5-(and-6)-chloromethyl-2′,7′-dichlorodihydrofluorescein diacetate to measure ROS and with tetramethylrhodamine to measure mitochondrial membrane potential. Transmission electron microscopy and immunohistochemistry were used for cardiomyocyte structural assessment. In vitro cyclical stretch and 8-wk ACF resulted in increased cardiomyocyte mitochondrial ROS production and decreased mitochondrial membrane potential, which were significantly improved by MitoQ. ACF had extensive loss of desmin and β2-tubulin that was paralleled by mitochondrial disorganization, loss of cristae, swelling, and clustering identified by mitochondria complex IV staining and transmission electron microscopy. MitoQ improved mitochondrial structural damage and attenuated desmin loss/degradation evidenced by immunohistochemistry and protein expression. However, LV dilatation and fractional shortening were unaffected by MitoQ treatment in 8-wk ACF. In conclusion, although MitoQ did not affect LV dilatation or function in ACF, these experiments suggest a connection of cardiomyocyte mitochondria-derived ROS production with cytoskeletal disruption and mitochondrial damage in the VO of ACF.

Pre-meiotic transformation of germplasm-related structures during male gamete differentiation in Xenopus laevis

Zygote ◽  
2014 ◽  
Vol 24 (1) ◽  
pp. 42-47
Author(s):  
Arkadiy A. Reunov ◽  
Yulia A. Reunova
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Quantitative Analysis ◽  
Xenopus Laevis ◽  
Mitochondrial Membrane ◽  
Male Gamete ◽  
Spermatogenic Cells ◽  
Terminal Stage ◽  
Germinal Granules ◽  
Transmission Electron

SummaryTo highlight the ultrastructural features of transformation occurring with germplasm-related structures (GPRS), the spermatogenic cells of Xenopus laevis were studied by transmission electron microscopy and quantitative analysis. It was determined that in spermatogonia and spermatocytes, the compact germinal granules underwent fragmentation into particles comparable with inter-mitochondrial cement (IMC). Fragments of IMC agglutinated some cell mitochondria and resulted in the creation of mitochondrial clusters. Clustered mitochondria responded with loss of their membranes that occurred by the twisting of membranous protrusions around themselves until multi-layered membranes were formed. The mitochondrial affinity of multi-layered membranes was proven by an immunopositive test for mitochondrial dihydrolipoamide acetyltransferase. As a consequence of mitochondrial membrane twisting, the naked mitochondrial cores appeared and presumably underwent dispersion, which is the terminal stage of GPRS transformation. As no GPRS were observed in spermatids and sperm, it was assumed that these structures are functionally assigned to early stages of meiotic differentiation.

Techniques for Transmission Electron Microscopy of Fiber-Matrix Interfaces in Aluminum Alloy-Boron Composites by Ion Erosio

1971 ◽  
Vol 29 ◽  
pp. 204-205
Author(s):  
G. G. Shaw
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Aluminum Alloy ◽  
Electron Beam ◽  
Pure Aluminum ◽  
Ion Milling ◽  
Transmission Electron ◽  
Fiber Matrix ◽  
Ion Erosion ◽  
Row Of Fibers

The morphology and composition of the fiber-matrix interface can best be studied by transmission electron microscopy and electron diffraction. For some composites satisfactory samples can be prepared by electropolishing. For others such as aluminum alloy-boron composites ion erosion is necessary.When one wishes to examine a specimen with the electron beam perpendicular to the fiber, preparation is as follows: A 1/8 in. disk is cut from the sample with a cylindrical tool by spark machining. Thin slices, 5 mils thick, containing one row of fibers, are then, spark-machined from the disk. After spark machining, the slice is carefully polished with diamond paste until the row of fibers is exposed on each side, as shown in Figure 1.In the case where examination is desired with the electron beam parallel to the fiber, preparation is as follows: Experimental composites are usually 50 mils or less in thickness so an auxiliary holder is necessary during ion milling and for easy transfer to the electron microscope. This holder is pure aluminum sheet, 3 mils thick.

Direct Observation of Heat Exchanger Deposits by Cross Sectioning

1967 ◽  
Vol 25 ◽  
pp. 364-365
Author(s):  
R. W. Anderson ◽  
D. L. Senecal
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Heat Exchanger ◽  
Direct Observation ◽  
Cross Sections ◽  
Preparation Method ◽  
Specimen Preparation ◽  
Flowing Water ◽  
Transmission Electron ◽  
Deposit Layer

A problem was presented to observe the packing densities of deposits of sub-micron corrosion product particles. The deposits were 5-100 mils thick and had formed on the inside surfaces of 3/8 inch diameter Zircaloy-2 heat exchanger tubes. The particles were iron oxides deposited from flowing water and consequently were only weakly bonded. Particular care was required during handling to preserve the original formations of the deposits. The specimen preparation method described below allowed direct observation of cross sections of the deposit layers by transmission electron microscopy.The specimens were short sections of the tubes (about 3 inches long) that were carefully cut from the systems. The insides of the tube sections were first coated with a thin layer of a fluid epoxy resin by dipping. This coating served to impregnate the deposit layer as well as to protect the layer if subsequent handling were required.

Phase Transformations in Ti-7w/oMo-3w/oMe Alloy

1974 ◽  
Vol 32 ◽  
pp. 514-515
Author(s):  
S. Fujishiro
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Transmission Electron Microscopy ◽  
Tensile Strength ◽  
Mechanical Processing ◽  
Ray Method ◽  
X Ray ◽  
Transmission Electron ◽  
Water Quench ◽  
Alpha Beta

The mechanical properties of three titanium alloys (Ti-7Mo-3Al, Ti-7Mo- 3Cu and Ti-7Mo-3Ta) were evaluated as function of: 1) Solutionizing in the beta field and aging, 2) Thermal Mechanical Processing in the beta field and aging, 3) Solutionizing in the alpha + beta field and aging. The samples were isothermally aged in the temperature range 300° to 700*C for 4 to 24 hours, followed by a water quench. Transmission electron microscopy and X-ray method were used to identify the phase formed. All three alloys solutionized at 1050°C (beta field) transformed to martensitic alpha (alpha prime) upon being water quenched. Despite this heavily strained alpha prime, which is characterized by microtwins the tensile strength of the as-quenched alloys is relatively low and the elongation is as high as 30%.

Two- or three-way observations of the identical cell elements within the same sections by LM, TEM and/or SEM

1978 ◽  
Vol 36 (2) ◽  
pp. 82-83 ◽  
Author(s):  
Nakazo Watari ◽  
Yasuaki Hotta ◽  
Yoshio Mabuchi
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Fine Structure ◽  
Light Microscopy ◽  
Thin Sections ◽  
Transmission Electron ◽  
Identical Cell ◽  
Electron Microscopes ◽  
Scanning Electron

It is very useful if we can observe the identical cell elements within the same sections by light microscopy (LM), transmission electron microscopy (TEM) and/or scanning electron microscopy (SEM) sequentially, because, the cell fine structure can not be indicated by LM, while the color is; on the other hand, the cell fine structure can be very easily observed by EM, although its color properties may not. However, there is one problem in that LM requires thick sections of over 1 μm, while EM needs very thin sections of under 100 nm. Recently, we have developed a new method to observe the same cell elements within the same plastic sections using both light and transmission (conventional or high-voltage) electron microscopes.In this paper, we have developed two new observation methods for the identical cell elements within the same sections, both plastic-embedded and paraffin-embedded, using light microscopy, transmission electron microscopy and/or scanning electron microscopy (Fig. 1).

Comparative Microstructures of Ion Milled and Electrochemically Thinned Composite Materials

1974 ◽  
Vol 32 ◽  
pp. 546-547
Author(s):  
R.R. Russell
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Composite Materials ◽  
Great Difficulty ◽  
Ion Milling ◽  
Transmission Electron ◽  
Ion Damage ◽  
Intermetallic Composite

Transmission electron microscopy of metallic/intermetallic composite materials is most challenging since the microscopist typically has great difficulty preparing specimens with uniform electron thin areas in adjacent phases. The application of ion milling for thinning foils from such materials has been quite effective. Although composite specimens prepared by ion milling have yielded much microstructural information, this technique has some inherent drawbacks such as the possible generation of ion damage near sample surfaces.

Maytansine-Induced Mitotic Arrest in Human Lymphoblasts

1977 ◽  
Vol 35 ◽  
pp. 460-461
Author(s):  
Tai-Te Chao ◽  
John Sullivan ◽  
Awtar Krishan
Keyword(s):  
Electron Microscopy ◽  
Cell Cycle ◽  
Transmission Electron Microscopy ◽  
Tubulin Polymerization ◽  
Vinca Alkaloids ◽  
Antimitotic Activity ◽  
Transmission Electron ◽  
Flow Microfluorometry ◽  
Brain Tubulin

Maytansine, a novel ansa macrolide (1), has potent anti-tumor and antimitotic activity (2, 3). It blocks cell cycle traverse in mitosis with resultant accumulation of metaphase cells (4). Inhibition of brain tubulin polymerization in vitro by maytansine has also been reported (3). The C-mitotic effect of this drug is similar to that of the well known Vinca- alkaloids, vinblastine and vincristine. This study was carried out to examine the effects of maytansine on the cell cycle traverse and the fine struc- I ture of human lymphoblasts.Log-phase cultures of CCRF-CEM human lymphoblasts were exposed to maytansine concentrations from 10-6 M to 10-10 M for 18 hrs. Aliquots of cells were removed for cell cycle analysis by flow microfluorometry (FMF) (5) and also processed for transmission electron microscopy (TEM). FMF analysis of cells treated with 10-8 M maytansine showed a reduction in the number of G1 cells and a corresponding build-up of cells with G2/M DNA content.

Sign in / Sign up

Export Citation Format

Share Document