scholarly journals Application of Titanium Dioxide-Graphene Composite Material for Photocatalytic Degradation of Alkylphenols

2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
Chanbasha Basheer
Keyword(s):  
Electron Microscopy ◽  
Titanium Dioxide ◽  
Photocatalytic Efficiency ◽  
Ionization Detector ◽  
X Ray Diffraction ◽  
X Ray ◽  
Graphene Composite ◽  
Flame Ionization ◽  
Transmission Electron ◽  
Wastewater Samples

Titanium dioxide-graphene (TiO2-G) composite was used for the photodegradation of alkylphenols in wastewater samples. The TiO2-G composites were prepared via sonochemical and calcination methods. The synthesized composite was characterized by X-ray diffraction (XRD), infrared spectroscopy (IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray analysis (EDX), and fluorescence spectroscopy. The photocatalytic efficiency was evaluated by studying the degradation profiles of alkylphenols using gas chromatography-flame ionization detector (GC-FID). It was found that the synthesized TiO2-G composites exhibit enhanced photocatalytic efficiencies as compared to pristine TiO2. The presence of graphene not only provides a large surface area support for the TiO2photocatalyst, but also stabilizes charge separation by trapping electrons transferred from TiO2, thereby hindering charge transfer and enhancing its photocatalytic efficiency.

Optical and photocatalytic properties of photoactive paper with polycrystalline TiO2 nanopigment for optimal product design

TAPPI Journal ◽  
2012 ◽  
Vol 11 (5) ◽  
pp. 33-38 ◽  
Author(s):  
SEONGHYUK KO ◽  
PAUL D. FLEMING ◽  
MARGARET JOYCE ◽  
PNINA ARI-GUR
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Gas Chromatography ◽  
Titanium Dioxide ◽  
Optical Properties ◽  
Photocatalytic Activity ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Optimal Product Design

We investigated the effect of the crystalline phases of titanium dioxide nanopigment to optimize the optical properties and photocatalytic activity for synthesizing a photoactive paper. Six different ratios of anatase to rutile were prepared. Phase change and particle size were characterized using X-ray diffraction and transmission electron microscopy. Optical properties including opacity and brightness were tested. Photocatalytic activity was evaluated by measuring toluene decomposition, using gas chromatography. A specific ratio between two different crystallites of titanium dioxide showed relatively better optical and photoactive properties. The optimal anatase-to-rutile ratio was found to be 0.52:0.48.

Synthesis of Bi0.5Sb1.5Te3/Graphene Composite Powders

2013 ◽  
Vol 743-744 ◽  
pp. 83-87
Author(s):  
B.B. Liang ◽  
Y. Li ◽  
L.L. Xu ◽  
L.J. Wang ◽  
W. Jiang
Keyword(s):  
Electron Microscopy ◽  
Active Sites ◽  
Synthesis Method ◽  
Charge Carriers ◽  
X Ray Diffraction ◽  
Composite Powders ◽  
X Ray ◽  
Graphene Composite ◽  
Transmission Electron ◽  
Different Content

In this paper, Bi0.5Sb1.5Te3/graphene composite powders were prepared by hydrothermal synthesis method. X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) were used to characterize the morphology and structure of the composite powders. As a nanocomposite phase, graphene provided plenty of charge carriers and active sites for nucleation of Bi0.5Sb1.5Te3 grains. Bi0.5Sb1.5Te3 particles aggregated and attached to the surfaces of graphene randomly. In addition, it was found that the sizes of Bi0.5Sb1.5Te3 particles varied with different content of graphene. The formation mechanism of Bi0.5Sb1.5Te3/graphene composite powders was discussed.

The Effects of Temperature of Hydrothermal Growth of Titanium Dioxide Nanomaterial

2012 ◽  
Vol 545 ◽  
pp. 93-99
Author(s):  
Ahmad Anis Kalantar Mastan ◽  
Muti Mohamed Norani ◽  
Sharizal Shaik Ahmedullah
Keyword(s):  
Electron Microscopy ◽  
Titanium Dioxide ◽  
Surface Morphology ◽  
Sodium Hydroxide Solution ◽  
Hydrothermal Growth ◽  
X Ray Diffraction ◽  
Average Width ◽  
X Ray ◽  
Transmission Electron ◽  
20 Nm

Titanium dioxide (titania) nanomaterials have been extensively studied for various applications including gas sensor [1], dye-sensitized solar cell [2] and photocatalyst [3]. Titania nanomaterials can be produced using various methods depending on the desired surface morphology. As such the optimization of methods is the key to produce nanomaterials with desired properties where the study here focuses on the effect of autoclaving temperature for the hydrothermal growth. Titania P25 (Degussa, Germany) in 5 M sodium hydroxide solution (NaOH) was treated hydrothermally for 24 hours at 100 °C, 120 °C, 150 °C and 170 °C. Hydrothermal treatment for 24 hours at 150 °C produced nanotubes and treatment at 170 °C produces nanowires. Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Energy-dispersive X-ray spectroscopy (EDX) and X-ray Diffraction (XRD) were performed to study the surface and internal morphology of nanomaterials formed. Nanowires produced are of average width of 20 nm and length of 200 nm to 1 µm. Nanotubes produced are average width of 25 nm consisting of multiple walls. Varying the autoclaving temperature will affect the surface morphology of nanomaterials; forming nanotubes at 150 °C and nanowires at 170 °C. Understanding the effect of the process temperature would allow for optimization of the process in order to produce titania nanomaterial with specific characteristics that exhibit enhanced functionality for the development of their applications.

A High Resolution Study of G.P. Zones in Aluminum - 4.2 at % Silver

1982 ◽  
Vol 40 ◽  
pp. 722-723 ◽  
Author(s):  
R. Gronsky
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Resolution ◽  
Computer Simulations ◽  
Structural Characteristics ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Resolution Study

The phenomenon of clustering in Al-Ag alloys has been extensively studied since the early work of Guinierl, wherein the pre-precipitation state was characterized as an assembly of spherical, ordered, silver-rich G.P. zones. Subsequent x-ray and TEM investigations yielded results in general agreement with this model. However, serious discrepancies were later revealed by the detailed x-ray diffraction - based computer simulations of Gragg and Cohen, i.e., the silver-rich clusters were instead octahedral in shape and fully disordered, atleast below 170°C. The object of the present investigation is to examine directly the structural characteristics of G.P. zones in Al-Ag by high resolution transmission electron microscopy.

Identification of calcium oxalate crystals in dried or fixed tobacco leaf

1984 ◽  
Vol 42 ◽  
pp. 288-289
Author(s):  
Vicki L. Baliga ◽  
Mary Ellen Counts
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Calcium Oxalate ◽  
Growth And Development ◽  
Polarized Light ◽  
Calcium Oxalate Crystals ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Calcium is an important element in the growth and development of plants and one form of calcium is calcium oxalate. Calcium oxalate has been found in leaf seed, stem material plant tissue culture, fungi and lichen using one or more of the following methods—polarized light microscopy (PLM), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and x-ray diffraction.Two methods are presented here for qualitatively estimating calcium oxalate in dried or fixed tobacco (Nicotiana) leaf from different stalk positions using PLM. SEM, coupled with energy dispersive x-ray spectrometry (EDS), and powder x-ray diffraction were used to verify that the crystals observed in the dried leaf with PLM were calcium oxalate.

The Effect of the Microstructure of Diffusion Barriers on the Palladium Activation for Electroless Copper Deposition

2002 ◽  
Vol 716 ◽  
Author(s):  
Seok Woo Hong ◽  
Yong Sun Lee ◽  
Ki-Chul Park ◽  
Jong-Wan Park
Keyword(s):  
Electron Microscopy ◽  
Diffusion Barriers ◽  
Copper Deposition ◽  
X Ray Diffraction ◽  
Plan View ◽  
X Ray ◽  
Transmission Electron ◽  
Electroless Copper ◽  
Sheet Resistance Measurement ◽  
Scanning Electron

AbstractThe effect of microstructure of dc magnetron sputtered TiN and TaN diffusion barriers on the palladium activation for autocatalytic electroless copper deposition has been investigated by using X-ray diffraction, sheet resistance measurement, field emission scanning electron microscopy (FE-SEM) and plan view transmission electron microscopy (TEM). The density of palladium nuclei on TaN diffusion barrier increases as the grain size of TaN films decreases, which was caused by increasing nitrogen content in TaN films. Plan view TEM results of TiN and TaN diffusiton barriers showed that palladium nuclei formed mainly on the grain boundaries of the diffusion barriers.

Palladium Nanowire Thin Films via Template Growth

2003 ◽  
Vol 775 ◽  
Author(s):  
Donghai Wang ◽  
David T. Johnson ◽  
Byron F. McCaughey ◽  
J. Eric Hampsey ◽  
Jibao He ◽  
...  
Keyword(s):  
Thin Film ◽  
Electron Microscopy ◽  
Thin Films ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Conductive Substrate ◽  
Palladium Nanowires ◽  
Efficient Route ◽  
Silica Thin Film

AbstractPalladium nanowires have been electrodeposited into mesoporous silica thin film templates. Palladium continually grows and fills silica mesopores starting from a bottom conductive substrate, providing a ready and efficient route to fabricate a macroscopic palladium nanowire thin films for potentially use in fuel cells, electrodes, sensors, and other applications. X-ray diffraction (XRD) and transmission electron microscopy (TEM) indicate it is possible to create different nanowire morphology such as bundles and swirling mesostructure based on the template pore structure.

scholarly journals Quartz Crystallite Size and Moganite Content as Indicators of the Mineralogical Maturity of the Carboniferous Chert: The Case of Cherts from Eastern Asturias (Spain)

Minerals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 611
Author(s):  
Celia Marcos ◽  
María de Uribe-Zorita ◽  
Pedro Álvarez-Lloret ◽  
Alaa Adawy ◽  
Patricia Fernández ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Crystallite Size ◽  
Archaeological Sites ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Infrared And Raman Spectroscopy ◽  
First Time ◽  
Geological Formations

Chert samples from different coastal and inland outcrops in the Eastern Asturias (Spain) were mineralogically investigated for the first time for archaeological purposes. X-ray diffraction, X-ray fluorescence, transmission electron microscopy, infrared and Raman spectroscopy and total organic carbon techniques were used. The low content of moganite, since its detection by X-ray diffraction is practically imperceptible, and the crystallite size (over 1000 Å) of the quartz in these cherts would be indicative of its maturity and could potentially be used for dating chert-tools recovered from archaeological sites. Also, this information can constitute essential data to differentiate the cherts and compare them with those used in archaeological tools. However, neither composition nor crystallite size would allow distinguishing between coastal and inland chert outcrops belonging to the same geological formations.

Effect of synthesis and activation methods on the character of CoMo/ultrastable Y-zeolite catalysts

2021 ◽  
Vol 19 (1) ◽  
pp. 745-754
Author(s):  
Khoirina Dwi Nugrahaningtyas ◽  
Eddy Heraldy ◽  
Rachmadani ◽  
Yuniawan Hidayat ◽  
Indriana Kartini
Keyword(s):  
Electron Microscopy ◽  
Reduction Process ◽  
Particle Morphology ◽  
Zeolite Catalysts ◽  
X Ray Diffraction ◽  
Y Zeolite ◽  
X Ray ◽  
Irregular Particle ◽  
Transmission Electron ◽  
Pure Metals

Abstract The properties of three types of CoMo/USY catalysts with different synthesized methods have been studied. The sequential and co-impregnation methods followed by activation using calcination and reduction process have been conducted. The properties of the catalysts were examined using Fourier-transform-infrared (FTIR) spectroscopy, X-ray diffraction (XRD) with refinement, and surface area analyzer (SAA). The FTIR spectrum study revealed the enhanced intensity of its Bronsted acid site, and the XRD diffractogram pattern verified the composition of pure metals, oxides, and alloys in the catalyst. The SAA demonstrated the mesoporous features of the catalyst. Scanning electron microscopy showed an irregular particle morphology. Additional analysis using the transmission electron microscopy indicated that the metal has successfully impregnated without damaging the USY structure.

scholarly journals Controlled Synthesis of CuS and Cu9S5 and Their Application in the Photocatalytic Mineralization of Tetracycline

Catalysts ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 899
Author(s):  
Murendeni P. Ravele ◽  
Opeyemi A. Oyewo ◽  
Damian C. Onwudiwe
Keyword(s):  
Electron Microscopy ◽  
Visible Light ◽  
Blue Shift ◽  
X Ray Diffraction ◽  
X Ray ◽  
Copper Sulfides ◽  
Transmission Electron ◽  
Single Source Precursor ◽  
Pure Phase ◽  
Pure Phases

Pure-phase Cu2−xS (x = 1, 0.2) nanoparticles have been synthesized by the thermal decomposition of copper(II) dithiocarbamate as a single-source precursor in oleylamine as a capping agent. The compositions of the Cu2−xS nanocrystals varied from CuS (covellite) through the mixture of phases (CuS and Cu7.2S4) to Cu9S5 (digenite) by simply varying the temperature of synthesis. The crystallinity and morphology of the copper sulfides were studied using X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM), which showed pure phases at low (120 °C) and high (220 °C) temperatures and a mixture of phases at intermediate temperatures (150 and 180 °C). Covellite was of a spherical morphology, while digenite was rod shaped. The optical properties of these nanocrystals were characterized by UV−vis–NIR and photoluminescence spectroscopies. Both samples had very similar absorption spectra but distinguishable fluorescence properties and exhibited a blue shift in their band gap energies compared to bulk Cu2−xS. The pure phases were used as catalysts for the photocatalytic degradation of tetracycline (TC) under visible-light irradiation. The results demonstrated that the photocatalytic activity of the digenite phase exhibited higher catalytic degradation of 98.5% compared to the covellite phase, which showed 88% degradation within the 120 min reaction time using 80 mg of the catalysts. The higher degradation efficiency achieved with the digenite phase was attributed to its higher absorption of the visible light compared to covellite.

Sign in / Sign up

Export Citation Format

Share Document