scholarly journals Effect of Nanosilver Gel, Chlorhexidine Gluconate, and Camphorated Phenol on Enterococcus faecalis Biofilm

2014 ◽  
Vol 2014 ◽  
pp. 1-5 ◽  
Author(s):  
Dong Bo ◽  
Cecilia Marcellino Kayombo
Keyword(s):  
Enterococcus Faecalis ◽  
Laser Scanning ◽  
Statistical Significance ◽  
Chlorhexidine Gluconate ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Control Analysis ◽  
Significant Difference ◽  
Post Hoc ◽  
One Way Anova

Aim. To assess the effectiveness of nanosilver gel (NSG) in comparison to chlorhexidine gluconate (CHX) and camphorated phenol (CP) against Enterococcus faecalis (E.f) biofilm. Methods and Materials. Two tests were done, methyl thiazolyl tetrazolium (MTT) assay and confocal laser scanning microscopy (CLSM) analysis, to determine the effectiveness of NSG, CHX, and CP on E.f biofilm. Polystyrene microtiter 96- and 6-well plates were used for MTT and CLSM, respectively. Nanosilver gel was in three concentrations (0.05%, 0.1%, and 0.2%), chlorhexidine gluconate used was 2%, and camphorated phenol and normal saline were as control. Analysis was done using one-way ANOVA; the post hoc test was run for multiple comparisons. The level of statistical significance was set at P<0.05. Results. One-way ANOVA showed significant differences among groups (0.05% NSG and CP, 0.1% NSG and CP, 0.2% NSG and CP, 0.1% NSG and 2% CHX, 0.2% and NSG and 2% CHX) (P<0.001) and also showed significant difference between groups (P<0.001), f-ratio 87.823. A post hoc Tukey’s test revealed no significant difference between chlorhexidine gluconate and 0.05% nanosilver gel (P>0.05). Conclusions. 0.1% and 0.2% nanosilver gel is more effective on Enterococcus faecalis biofilm as compared to chlorhexidine gluconate and camphorated phenol.

scholarly journals Effect of Propolis Nanoparticles against Enterococcus faecalis Biofilm in the Root Canal

Molecules ◽  
2021 ◽  
Vol 26 (3) ◽  
pp. 715
Author(s):  
Abhishek Parolia ◽  
Haresh Kumar ◽  
Srinivasan Ramamurthy ◽  
Thiagarajan Madheswaran ◽  
Fabian Davamani ◽  
...  
Keyword(s):  
Enterococcus Faecalis ◽  
Bioactive Compounds ◽  
Root Canal ◽  
Laser Scanning ◽  
Antibacterial Effect ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Internal Diameter ◽  
Group I ◽  
Significant Difference

To determine the antibacterial effect of propolis nanoparticles (PNs) as an endodontic irrigant against Enterococcus faecalis biofilm inside the endodontic root canal system. Two-hundred-ten extracted human teeth were sectioned to obtain 6 mm of the middle third of the root. The root canal was enlarged to an internal diameter of 0.9 mm. The specimens were inoculated with E. faecalis for 21 days. Following this, specimens were randomly divided into seven groups, with 30 dentinal blocks in each group including: group I—saline; group II—propolis 100 µg/mL; group III—propolis 300 µg/mL; group IV—propolis nanoparticle 100 µg/mL; group V—propolis nanoparticle 300µg/mL; group VI—6% sodium hypochlorite; group VII—2% chlorhexidine. Dentin shavings were collected at 200 and 400 μm depths, and total numbers of CFUs were determined at the end of one, five, and ten minutes. The non-parametric Kruskal–Wallis and Mann–Whitney tests were used to compare the differences in reduction in CFUs between all groups, and probability values of p < 0.05 were set as the reference for statistically significant results. The antibacterial effect of PNs as an endodontic irrigant was also assessed against E. faecalis isolates from patients with failed root canal treatment. Scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM) were also performed after exposure to PNs. A Raman spectroscope, equipped with a Leica microscope and lenses with curve-fitting Raman software, was used for analysis. The molecular interactions between bioactive compounds of propolis (Pinocembrin, Kaempferol, and Quercetin) and the proteins Sortase A and β-galactosidase were also understood by computational molecular docking studies. PN300 was significantly more effective in reducing CFUs compared to all other groups (p < 0.05) except 6% NaOCl and 2% CHX (p > 0.05) at all time intervals and both depths. At five minutes, 6% NaOCl and 2% CHX were the most effective in reducing CFUs (p < 0.05). However, no significant difference was found between PN300, 6% NaOCl, and 2% CHX at 10 min (p > 0.05). SEM images also showed the maximum reduction in E. faecalis with PN300, 6% NaOCl, and 2% CHX at five and ten minutes. CLSM images showed the number of dead cells in dentin were highest with PN300 compared to PN100 and saline. There was a reduction in the 484 cm−1 band and an increase in the 870 cm−1 band in the PN300 group. The detailed observations of the docking poses of bioactive compounds and their interactions with key residues of the binding site in all the three docking protocols revealed that the interactions were consistent with reasonable docking and IFD docking scores. PN300 was equally as effective as 6% NaOCl and 2% CHX in reducing the E. faecalis biofilms.

Antibacterial effect of propolis nanoparticles against Enterococcus faecalis biofilm in the root canal

2019 ◽  
Author(s):  
Abhishek Parolia ◽  
Haresh Kumar Kumar ◽  
Srinivasan Ramamurthy Ramamurthy ◽  
Allan Pau
Keyword(s):  
Enterococcus Faecalis ◽  
Root Canal ◽  
Laser Scanning ◽  
Antibacterial Effect ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Internal Diameter ◽  
Sem Images ◽  
Group I ◽  
Significant Difference

Abstract Background: To determine the antibacterial effect of propolis nanoparticles (PNs) as an endodontic irrigant against Enterococcus faecalis biofilm in root canal. Methods: PNs were prepared by ultrasonication and the particle size distribution and polydispersity index were determined by dynamic light scattering using Zetasizer Nano S90. 210 extracted human teeth were sectioned to obtain 6mm of the middle third of the root. The root canal was enlarged to an internal diameter of 0.9mm. The specimens were inoculated with E. faecalis for 21 days. Following this, specimens were randomly divided into seven groups having 30 dentinal blocks in each group including group I: saline, group II: propolis 100µg/ml, group III: propolis 300µg/ml, group IV: propolis nanoparticle 100µg/ml, group V: propolis nanoparticle 300µg/ml, group VI: 6% sodium hypochlorite, group VII: 2% chlorhexidine. Dentine shavings were collected at 200 and 400 μm depths, and total numbers of CFUs were determined at the end of one, five, and ten minutes. The non-parametric Kruskal Wallis and Mann-Whitney tests were used to compare the differences in reduction of CFUs between all groups and probability values of P < 0.05 were set as the reference for statistically significant results. The scanning electron microscope and confocal laser scanning microscopy were also performed after exposure to PNs. Results: PN300 was significantly more effective in reducing CFUs compared to all other groups (p <0.05) except 6% NaOCl and 2% CHX (p >0.05) at all-time intervals and both depths. At five minutes, 6% NaOCl and 2 % CHX were the most effective in reducing CFUs (p <0.05) however, no significant difference was found in between PN300, 6% NaOCl and 2 % CHX at 10 minutes (p >0.05). SEM images also showed the maximum reduction of E. faecalis with PN300, 6% NaOCl and 2% CHX (>90 %) at five and ten minutes. CLSM images showed the number of dead cells in dentin was highest with PN300 (>90%) compared to PN100 (>40%) and saline (all live cells). Conclusion: PN300 was equally effective as 6% NaOCl, and 2% CHX in reducing E. faecalis CFUs after one minute, five and ten minutes at both depths.

Use of confocal laser scanning microscopy and a computer model to understand ink cavitation and filamentation

TAPPI Journal ◽  
2010 ◽  
Vol 9 (10) ◽  
pp. 7-15
Author(s):  
HANNA KOIVULA ◽  
DOUGLAS BOUSFIELD ◽  
MARTTI TOIVAKKA
Keyword(s):  
Laser Scanning ◽  
Confocal Laser Scanning Microscope ◽  
Laser Scanning Microscopy ◽  
Confocal Laser Scanning ◽  
Confocal Laser ◽  
Print Quality ◽  
Length Scale ◽  
Offset Printing ◽  
Significant Difference ◽  
Printing Speed

In the offset printing process, ink film splitting has an important impact on formation of ink filaments. The filament size and its distribution influence the leveling of ink and hence affect ink setting and the print quality. However, ink filaments are difficult to image due to their short lifetime and fine length scale. Due to this difficulty, limited work has been reported on the parameters that influence filament size and methods to characterize it. We imaged ink filament remains and quantified some of their characteristics by changing printing speed, ink amount, and fountain solution type. Printed samples were prepared using a laboratory printability tester with varying ink levels and operating settings. Rhodamine B dye was incorporated into fountain solutions to aid in the detection of the filaments. The prints were then imaged with a confocal laser scanning microscope (CLSM) and images were further analyzed for their surface topography. Modeling of the pressure pulses in the printing nip was included to better understand the mechanism of filament formation and the origin of filament length scale. Printing speed and ink amount changed the size distribution of the observed filament remains. There was no significant difference between fountain solutions with or without isopropyl alcohol on the observed patterns of the filament remains.

scholarly journals Use of electromagnetic stimulation on an Enterococcus faecalis biofilm on root canal treated teeth in vitro

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Beatriz H. D. Panariello ◽  
Justin K. Kindler ◽  
Kenneth J. Spolnik ◽  
Ygal Ehrlich ◽  
George J. Eckert ◽  
...  
Keyword(s):  
Enterococcus Faecalis ◽  
Root Canal ◽  
Laser Scanning ◽  
Confocal Imaging ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Microscopy Imaging ◽  
Electromagnetic Stimulation ◽  
Root Canal Disinfection

AbstractRoot canal disinfection is of utmost importance in the success of the treatment, thus, a novel method for achieving root canal disinfection by electromagnetic waves, creating a synergistic reaction via electric and thermal energy, was created. To study electromagnetic stimulation (EMS) for the disinfection of root canal in vitro, single rooted teeth were instrumented with a 45.05 Wave One Gold reciprocating file. Specimens were sterilized and inoculated with Enterococcus faecalis ATCC 29,212, which grew for 15 days to form an established biofilm. Samples were treated with 6% sodium hypochlorite (NaOCl), 1.5% NaOCl 1.5% NaOCl with EMS, 0.9% saline with EMS or 0.9% saline. After treatments, the colony forming units (CFU) was determined. Data was analyzed by Wilcoxon Rank Sums Test (α = 0.05). One sample per group was scored and split for confocal laser scanning microscopy imaging. There was a significant effect with the use of NaOCl with or without EMS versus 0.9% saline with or without EMS (p = 0.012 and 0.003, respectively). CFUs were lower when using 0.9% saline with EMS versus 0.9% saline alone (p = 0.002). Confocal imaging confirmed CFU findings. EMS with saline has an antibiofilm effect against E. faecalis and can potentially be applied for endodontic disinfection.

scholarly journals Micromorphological analysis and bond strength comparison of two adhesives for different degrees of dental fluorosis

2020 ◽  
Author(s):  
Shuangfeng Liu ◽  
Yanxia Zhu ◽  
Tana Gegen
Keyword(s):  
Shear Strength ◽  
Bond Strength ◽  
Bonding Strength ◽  
Laser Scanning ◽  
Dental Fluorosis ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Cohesive Failure ◽  
Bonding System ◽  
Significant Difference

Abstract The objective of this study was to analyze morphologically the all-etching bonding system and self-etching bonding system for enamel with different degrees of fluorosis and evaluate the bond strength of each system. Teeth that were indicated for extraction owing to orthodontic or periodontal problems were selected. According to Dean’s index and the Thylstrup-Fejerskov index, 180 extracted teeth were divided into three groups of mild, moderate, and severe dental fluorosis (DF), with 60 teeth in each group. The teeth in each group were randomly divided into two subgroups (n = 30), which were then subjected to the all-etching bonding system (Prime & Bond NT) and self-etching bonding system (SE-Bond). Each group of adhesives was used to bond Z350 universal resin (3M) to the etched dental enamel. Tensile and shear tests were conducted to determine the bond strength. Subsequently, the fractured specimens were investigated using scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM). The Prime & Bond NT was statistically significant for the tensile and shear strength of enamel with mild fluorosis (P < 0.05) but did not exhibit a significant difference for moderate and severe DF (P > 0.05). The SE-Bond was not statistically significant for the tensile and shear strength of mild, moderate, or severe DF (P > 0.05). The SEM and CLSM results reveal that the mild fluorosis enamel crystals were relatively dense, and a small amount of resin remained. The moderate fluorosis enamel crystals were loosely arranged, and the gaps were widened. The severe fluorosis enamel crystals were irregularly arranged. The disorder was aggravated, and the dentinal orifice was exposed by partial enamel exfoliation. The bonding strength of mild fluorosis enamel with the Prime & Bond NT was better than that with the SE-Bond, and cohesive failure was the most common mode of failure. Because there was no difference in the bonding strength of the SE-Bond for different degrees of DF, we recommend the use of the all-etching adhesive system in the clinical treatment of teeth with mild fluorosis.

scholarly journals Evaluation of four final irrigation protocols for cleaning root canal walls

2020 ◽  
Vol 12 (1) ◽  
Author(s):  
Qiang Li ◽  
Qian Zhang ◽  
Xiaoying Zou ◽  
Lin Yue
Keyword(s):  
Root Canal ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Smear Layer ◽  
Confocal Laser ◽  
Bacterial Survival ◽  
Bacterial Inhibition ◽  
Layer Removal ◽  
Significant Difference ◽  
Canal Systems

Abstract The aim of this study was to compare the efficiency of four final irrigation protocols in smear layer removal and bacterial inhibition in root canal systems. Thirty roots inoculated with Enterococcus faecalis were prepared with ProTaper Universal files. The teeth were disinfected by conventional needle irrigation, sonic agitation using the EndoActivator device, passive ultrasonic irrigation, or an M3 Max file. Teeth with no root canal preparation served as blank controls for the establishment of the infection baseline. Teeth with preparation but no final irrigation served as a post-instrumentation baseline. After the final irrigation, the teeth were sectioned in half. One half of each tooth was examined by scanning electron microscopy (SEM) to assess smear layer removal using a five-point scale. The other half was examined by confocal laser scanning microscopy (CLSM) using the LIVE/DEAD BackLight bacterial viability kit to evaluate the depth of bacterial survival in dentinal tubules. SEM analysis revealed no significant difference in smear layer removal throughout the whole canal among the EA, PUI, and M3 Max groups (P > 0.05). CLSM revealed that PUI achieved the greatest bacterial inhibition depth in the coronal ((174.27 ± 31.63) μm), middle ((160.94 ± 37.77) μm), and apical ((119.53 ± 28.49) μm) thirds of the canal (all P < 0.05 vs. other groups). According to this comprehensive SEM and CLSM evaluation, PUI appears to have the best infection control ability in root canal systems.

scholarly journals Analysis of Shear Bond Strength and Morphology of Er:YAG Laser-Recycled Ceramic Orthodontic Brackets

2016 ◽  
Vol 2016 ◽  
pp. 1-6 ◽  
Author(s):  
Ruo-qiao Han ◽  
Kai Yang ◽  
Ling-fei Ji ◽  
Chen Ling
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Laser Scanning ◽  
Er:Yag Laser ◽  
Statistical Significance ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Control Group ◽  
Test Machine ◽  
Ceramic Brackets

Objective. The aim of this study was to compare the recycling of deboned ceramic brackets via an Er:YAG laser or via the traditional chairside processing methods of flaming and sandblasting; shear bond strength and morphological changes were evaluated in recycled brackets versus new brackets.Materials and Methods. 3M Clarity Self-Ligating Ceramic Brackets with a microcrystalline base were divided into groups subjected to flaming, sandblasting, or exposure to an Er:YAG laser. New ceramic brackets served as a control group. Shear bond strengths were determined with an Electroforce test machine and tested for statistical significance through analysis of variance. Morphological examinations of the recycled ceramic bracket bases were conducted with scanning electron microscopy and confocal laser scanning microscopy. Residue on the bracket base was analyzed with Raman spectroscopy.Results. Faded, dark adhesive was left on recycled bracket bases processed via flaming. Adhesive was thoroughly removed by both sandblasting and exposure to an Er:YAG laser. Compared with new brackets, shear bond strength was lower after sandblasting (p<0.05), but not after exposure to an Er:YAG laser. The Er:YAG laser caused no damage to the bracket.Conclusion. Er:YAG lasers effectively remove adhesive from the bases of ceramic brackets without damaging them; thus, this method may be preferred over other recycling methods.

131 APOPTOSIS AND DEVELOPMENT OF IN VITRO-PRODUCED BOVINE EMBRYOS EXPOSED TO SUPRAPHYSIOLOGICAL CONCENTRATIONS OF INSULIN-LIKE GROWTH FACTOR-1 (IGF-1)

2009 ◽  
Vol 21 (1) ◽  
pp. 165
Author(s):  
M. A. Velazquez ◽  
H. Niemann
Keyword(s):  
Laser Scanning ◽  
Apoptotic Cell ◽  
Polycystic Ovary ◽  
Statistical Significance ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Control Group ◽  
Fisher Exact Test ◽  
Bovine Embryos

It has been hypothesized that high non-physiological IGF-1 levels are partially responsible for the recurrent pregnancy loss observed in women with the polycystic ovary syndrome (Eng GS et al. 2007 Diabetes 56, 2228–2234). The aim of this study was to determine the effect of supraphysiological concentrations of IGF-1 on blastocyst production and the occurrence of apoptosis in bovine embryos, which are a good model for human embryo development (Baumann CG et al. 2007 Mol. Reprod. Dev. 74, 1345–1353). COC obtained by slicing from abattoir ovaries were matured (TCM-199, Sigma) for 24 h and fertilized (Fert-TALP) for 18 h (Day 0) in vitro. Two different IGF-1 (Recombinant human IGF-1, R&D Systems GmbH, Wiesbaden, Germany) concentrations (supraphysiological = 1000 ng mL–1 and physiological = 100 ng mL–1) were added to the culture media (Synthetic oviduct fluid/BSA) and compared with a control group (no IGF-1 supplementation). On Day 8, blastocyst rates (22 replicates) were recorded and DNA degradation was detected in blastocyst nuclei using a cell death detection kit (Roche Diagnostics GmbH, Mannheim, Germany) based on the terminal deoxinucleotidyl transferase-mediated dUTP nick end labelling (TUNEL) principle. Embryos (n = 27 [control], n = 29 [both IGF-1 groups]) from 4 replicates were examined by confocal laser scanning microscopy. Data were analyzed by ANOVA and the Fisher exact test using the SigmaStat 2.0 software package (Jandel Scientific, San Rafael, CA). Cleavage was numerically improved by both, 1000 (59.1 ± 1.8) and 100 (58.2 ± 2.8) ng IGF-1 over controls (53.5 ± 2.2), but the differences did not reach statistical significance (P = 0.22). The proportion of hatched blastocysts was enhanced by 100 (5.8 ± 1.0, P = 0.03) and 1000 (5.1 ± 0.7, P = 0.03) ng IGF-1 compared to controls (2.8 ± 0.6). Total blastocyst rate was increased by 100 ng IGF-1 (34.4 ± 1.9, P = 0.02) over controls (28.3 ± 1.7), but not by 1000 ng IGF-1 (29.1 ± 1.6 P = 0.75). The 100 ng IGF-1 group (38.5 ± 3.7) had fewer degenerated embryos (P = 0.01) compared to 1000 ng IGF-1 (49.7 ± 3.3). The proportion of embryos displaying at least one apoptotic cell was greater in the 1000 ng IGF-1 group over controls (96% v. 77% P = 0.04). The number of blastomeres with TUNEL-positive nuclei per embryo was higher in the supraphysiological group (5.5 ± 0.6, P < 0.001) compared with the control (2.3 ± 0.4) and the physiological group (2.5 ± 0.3). There were no significant differences between the control and the 100 ng IGF-1 group in this regard (P = 0.49). In conclusion, supraphysiological concentrations of IGF-1 do not increase blastocyst production but increase levels of apoptosis in bovine embryos produced in vitro. M. A. V. is in the PhD program of the University of Veterinary medicine, Hannover, Germany, and is supported by the German Academic Exchange Service (DAAD)

scholarly journals Enhanced Bactericidal Efficacy of NaOCl at pH 12 Followed by Acidified NaOCl at pH 6.5 on Enterococcus faecalis Biofilm

2020 ◽  
Vol 10 (17) ◽  
pp. 6096
Author(s):  
Ronald Wigler ◽  
Shlomo Matalon ◽  
Tomer Goldberger ◽  
Anat Or Lerner ◽  
Anda Kfir
Keyword(s):  
Contact Time ◽  
Laser Scanning ◽  
Saline Solution ◽  
Volume Ratio ◽  
Bactericidal Effect ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Red Fluorescence ◽  
Bactericidal Efficacy ◽  
Significant Difference

This study aimed to determine the bactericidal efficacy of sequential use of NaOCl pH 12 followed by acidified NaOCl pH 6.5, and compare it to that of either of these NaOCl solutions alone. E. faecalis biofilm was grown on standardized dentine specimens for four weeks. The specimens were randomly divided into four groups: (A) 4 min exposure to 0.9% saline solution (control); (B) 4 min exposure to 4% NaOCl pH 12; (C) 4 min exposure to 4% NaOCl pH 6.5; and (D) 2 min exposure to 4% NaOCl pH 12 followed by 2 min exposure to 4% NaOCl pH 6.5. The bactericidal activity was evaluated after the 4 min of contact time using confocal laser scanning microscopy. The volume ratio of red fluorescence to green and red fluorescence indicated the proportion of dead cells in the biofilm. The percent of dead cells in the saline solution group was significantly lower than those in the other groups. There was no significant difference between NaOCl pH 12 compared to NaOCl pH 6.5. The sequential use of NaOCl pH 12 followed by pH 6.5 significantly increased the percent of dead cells compared to both the samples exposed to either NaOCl pH 12 or pH 6.5. These results show that sequential irrigation protocol had a stronger bactericidal effect than the commonly used NaOCl pH 12.

Sign in / Sign up

Export Citation Format

Share Document