scholarly journals Application of Electro-Fenton Technology to Remediation of Polluted Effluents by Self-Sustaining Process

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Maria Ángeles Fernández de Dios ◽  
Olaia Iglesias ◽  
Marta Pazos ◽  
Maria Ángeles Sanromán
Keyword(s):  
Organic Pollutants ◽  
Microbial Fuel Cells ◽  
Advanced Oxidation Process ◽  
Low Cost ◽  
Integrated System ◽  
Reactive Black 5 ◽  
Treatment Efficiency ◽  
Phenanthrene Degradation ◽  
Polycyclic Aromatic ◽  
High Treatment

The applicability of electro-Fenton technology to remediation of wastewater contaminated by several organic pollutants such as dyes and polycyclic aromatic hydrocarbons has been evaluated using iron-enriched zeolite as heterogeneous catalyst. The electro-Fenton technology is an advanced oxidation process that is efficient for the degradation of organic pollutants, but it suffers from the high operating costs due to the need for power investment. For this reason, in this study microbial fuel cells (MFCs) were designed in order to supply electricity to electro-Fenton processes and to achieve high treatment efficiency at low cost. Initially, the effect of key parameters on the MFC power generation was evaluated. Afterwards, the degradation of Reactive Black 5 dye and phenanthrene was evaluated in an electro-Fenton reactor, containing iron-enriched zeolite as catalyst, using the electricity supplied by the MFC. Near complete dye decolourization and 78% of phenanthrene degradation were reached after 90 min and 30 h, respectively. Furthermore, preliminary reusability tests of the developed catalyst showed high degradation levels for successive cycles. The results permit concluding that the integrated system is adequate to achieve high treatment efficiency with low electrical consumption.

scholarly journals Metal-Based Nanocomposite Materials for Efficient Photocatalytic Degradation of Phenanthrene from Aqueous Solutions

Polymers ◽  
2021 ◽  
Vol 13 (14) ◽  
pp. 2374
Author(s):  
Husn Ara Chauhan ◽  
Mohd. Rafatullah ◽  
Khozema Ahmed Ali ◽  
Masoom Raza Siddiqui ◽  
Moonis Ali Khan ◽  
...  
Keyword(s):  
Aqueous Solutions ◽  
Photocatalytic Degradation ◽  
High Performance ◽  
Fossil Fuels ◽  
Low Cost ◽  
Nanocomposite Materials ◽  
Phenanthrene Degradation ◽  
Naturally Occurring ◽  
Polycyclic Aromatic ◽  
Day By Day

Polycyclic aromatic hydrocarbons (PAHs) are a class of naturally occurring chemicals resulting from the insufficient combustion of fossil fuels. Among the PAHs, phenanthrene is one of the most studied compounds in the marine ecosystems. The damaging effects of phenanthrene on the environment are increasing day by day globally. To lessen its effect on the environment, it is essential to remove phenanthrene from the water resources in particular and the environment in general through advanced treatment methods such as photocatalytic degradation with high-performance characteristics and low cost. Therefore, the combination of metals or amalgamation of bimetallic oxides as an efficient photocatalyst demonstrated its propitiousness for the degradation of phenanthrene from aqueous solutions. Here, we reviewed the different nanocomposite materials as a photocatalyst, the mechanism and reactions to the treatment of phenanthrene, as well as the influence of other variables on the rate of phenanthrene degradation.

Anaerobic treatment of soil wash fluids from a wood preserving site

1998 ◽  
Vol 38 (7) ◽  
pp. 63-72 ◽  
Author(s):  
K. M. Miller ◽  
M. T. Suidan ◽  
G. A. Sorial ◽  
A. P. Khodadoust ◽  
C. M. Acheson ◽  
...  
Keyword(s):  
Soil Washing ◽  
Anaerobic Treatment ◽  
Integrated System ◽  
Waste Stream ◽  
Adsorptive Capacity ◽  
Anaerobic Conditions ◽  
Washing Process ◽  
Polycyclic Aromatic ◽  
Treatment Technologies ◽  
Solvent Washing

An integrated system has been developed to remediate soils contaminated with pentachlorophenol (PCP) and polycyclic aromatic hydrocarbons (PAHs). This system involves the coupling of two treatment technologies, soil solvent washing and anaerobic biotreatment of the extract. Specifically, this study evaluated the effectiveness of the granular activated carbon (GAC) fluidized-bed reactor to treat a synthetic waste stream of PCP and four PAHs (naphthalene, acenaphthene, pyrene, and benzo(b)fluoranthene) under anaerobic conditions. This waste stream was intended to simulate the wash fluids from a soil washing process treating soils from a wood preserving site. The reactor achieved a removal efficiency of greater than 99.8% for PCP with conversion to its dechlorination intermediates ranging from 47% to 77%. Effluent, carbon extraction, and isotherm data also indicate that naphthalene and acenaphthene were removed from the liquid phase with efficiencies of 86% and 93%, respectively. Effluent levels of pyrene and benzo(b)fluoranthene were extremely low due to the adsorptive capacity of GAC for these compounds. Experimental evidence does not suggest that these compounds were chemically transformed within the reactor.

scholarly journals The Use of Sodium Carbonate—Hydrogen Peroxide (2/3) in the Modified Fenton Reaction to Degradation PAHs in Coke Wastewater

Proceedings ◽  
2019 ◽  
Vol 16 (1) ◽  
pp. 44
Author(s):  
Kozak ◽  
Włodarczyk-Makuła
Keyword(s):  
Hydrogen Peroxide ◽  
Organic Pollutants ◽  
Sodium Carbonate ◽  
Uv Light ◽  
Oxygen Demand ◽  
Organic Matrix ◽  
Coke Wastewater ◽  
Polycyclic Aromatic ◽  
Pahs Concentration ◽  
Modified Fenton

The aim of the research was to determine the effectiveness of removing micro-organic pollutants, including PAHs, using the modified Fenton method. The tested material was pretreated coke wastewater, in which the initial chemical oxygen demand (COD) value and initial polycyclic aromatic hydrocarbons (PAHs) concentration were determined. The samples were then subjected to an oxidation procedure. Before the process, the pH was adjusted to 3.5–3.8. Next, the following doses of sodium carbonate—hydrogen peroxide (2/3): 1.2 g/L, 1.5 g/L and 2 g/L, and a constant dose of iron sulphate were added. The next step was exposing the samples to UV light for 6 min and separating the organic matrix from the samples of wastewater. After the tests, the final value of the COD and the final PAHs concentration were determined. The average content of organic pollutants in pretreated coke wastewater determined by the COD index was 538 mg/L, and after the oxidation process, the COD index decreased in the range from 9 to 29%. The efficiency of the degradation of the sum of 16 PAHs was varied and was in the range of 94–97.6%. The research results show that sodium carbonate—hydrogen peroxide (2/3) can be used for the degradation of organic pollutants, such as PAHs, in the modified Fenton process.

scholarly journals Fabrication of TiO2/Fe2O3/CdS systems: effects of Fe2O3 and CdS content on superior photocatalytic activity

RSC Advances ◽  
2021 ◽  
Vol 11 (17) ◽  
pp. 10300-10308
Author(s):  
Hui Feng ◽  
Siqi Feng ◽  
Niu Tang ◽  
Songbai Zhang ◽  
Xiangyang Zhang ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Photocatalytic Activity ◽  
Organic Pollutants ◽  
High Performance ◽  
Low Cost

New idea for the low cost synthesis of high performance photocatalysts for the photodegradation of organic pollutants in aqueous solution.

scholarly journals Remediation of Anthracene-Contaminated Soil with Sophorolipids-SDBS-Na2SiO3 and Treatment of Eluting Wastewater

Water ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 2188
Author(s):  
Wei Li ◽  
Xiaofeng Wang ◽  
Lixiang Shi ◽  
Xianyuan Du ◽  
Zhansheng Wang
Keyword(s):  
Polycyclic Aromatic Hydrocarbons ◽  
Organic Pollutants ◽  
Aromatic Hydrocarbons ◽  
Contaminated Soil ◽  
Ring Opening ◽  
Single Factor ◽  
Elution Time ◽  
Factor B ◽  
Ring Opening Reaction ◽  
Polycyclic Aromatic

The soil pollution of polycyclic aromatic hydrocarbons (PAHs) is serious in China, which not only affects the living and growing environment of plants and animals but also has a great impact on people’s health. The use of hydrophobic organic compounds to make use of surfactant ectopic elution processing is more convenient and cheaper as a repair scheme and can effectively wash out the polycyclic aromatic hydrocarbons in the soil. Therefore, we mixed sophorolipids:sodium dodecylbenzene sulfonate (SDBS):Na2SiO3 according to the mass ratio of 1:15:150. We explored the influencing factors of high and low concentrations of PAH-contaminated soil using a single factor test and four factors at a two-level factorial design. Then, the elution wastewater was treated by ultrasonic oxidation technology and the alkali-activated sodium persulfate technology. The results showed that: (1) In the single factor test, when the elution time is 8 h, the concentration of the compounded surfactant is 1200 mg/L, the particle size is 60 mesh, the concentration of NaCl is 100 mmol/L, and the concentration of KCl is 50 mmol/L, and the effect of the PAH-contaminated soil eluted by the composite surfactant is the best. Externally added NaCl and KCl salt ions have a more obvious promotion effect on the polycyclic aromatic hydrocarbon-contaminated soil; (2) in the interaction experiment, single factor B (elution time) and D (NaCl concentration) have a significant main effect. There is also a certain interaction between factor A (concentration agent concentration) and factor D, factor B, and factor C (KCl concentration); (3) the treatment of anthracene in the eluate by ultrasonic completely mineralizes the organic pollutants by the thermal and chemical effects produced by the ultrasonic cavitation phenomenon, so that the organic pollutants in the eluate are oxidized and degraded into simple environmentally friendly small molecular substances. When the optimal ultrasonic time is 60 min and the ratio of oxidant to activator is 1:2, the removal rate of contaminants in the eluent can reach 63.7%. At the same time, the turbidity of the eluent is significantly lower than that of the liquid after centrifugal separation, indicating that oxidants can not only remove the pollutants in elution water but also remove the residual soil particulate matter; and (4) by comparing the infrared spectrum of the eluted waste liquid before and after oxidation, it can be seen that during the oxidation process, the inner part of eluent waste liquid underwent a ring-opening reaction, and the ring-opening reaction also occurred in the part of the cyclic ester group of the surfactant, which changed from a ring to non-ring.

Photo-degradation of butyl parahydroxybenzoate by using TiO2-supported catalyst

2013 ◽  
Vol 67 (10) ◽  
pp. 2141-2147 ◽  
Author(s):  
Patrick Atheba ◽  
Patrick Drogui ◽  
Brahima Seyhi ◽  
Didier Robert
Keyword(s):  
Flow Rate ◽  
Photocatalytic Oxidation ◽  
Supported Catalyst ◽  
Operating Conditions ◽  
Treatment Efficiency ◽  
Optimal Operating ◽  
Photo Degradation ◽  
Photochemical Process ◽  
Recirculation Flow ◽  
High Treatment

The present work evaluates the potential of the photocatalysis (PC) process for the degradation of butylparaben (BPB). Relatively high treatment efficiency was achieved by comparison to photochemical process. Prior to photocatalytic degradation, adsorption (AD) of BPB occurred on the titanium dioxide (TiO2)-supported catalyst. AD was described by Langmuir isotherm (KL = 0.085 L g−1, qm = 4.77 mg g−1). The influence of angle of inclination of the reactor, pH, recirculation flow rate and initial concentration of BPB were investigated. The PC process applied under optimal operating conditions (recirculation flow rate of 0.15 L min−1, angle of inclination of 15°, pH = 7 and 5 mg L−1 of BPB) is able to oxidize 84.9–96.6% of BPB and to ensure around 38.7% of mineralization. The Langmuir–Hinshelwood kinetic model described well the photocatalytic oxidation of BPB (k = 7.02 mg L−1 h−1, K = 0.364 L mg−1).

Removal of some polycyclic aromatic hydrocarbons from petrochemical wastewater using low-cost adsorbents of natural origin

2008 ◽  
Vol 99 (10) ◽  
pp. 4515-4519 ◽  
Author(s):  
Rudy Crisafully ◽  
Maria Aparecida L. Milhome ◽  
Rivelino M. Cavalcante ◽  
Edilberto R. Silveira ◽  
Denis De Keukeleire ◽  
...  
Keyword(s):  
Polycyclic Aromatic Hydrocarbons ◽  
Aromatic Hydrocarbons ◽  
Low Cost ◽  
Petrochemical Wastewater ◽  
Natural Origin ◽  
Polycyclic Aromatic

Conductive 3D sponges for affordable and highly-efficient water purification

Nanoscale ◽  
2018 ◽  
Vol 10 (10) ◽  
pp. 4771-4778 ◽  
Author(s):  
Yanbiao Liu ◽  
Fang Li ◽  
Qin Xia ◽  
Jiawei Wu ◽  
Jianshe Liu ◽  
...  
Keyword(s):  
Organic Pollutants ◽  
Water Purification ◽  
Low Cost ◽  
Highly Efficient ◽  
Electro Oxidation ◽  
Conductive Nanomaterials ◽  
Filtration Device

We developed a low-cost method to achieve efficient organic pollutants degradation by incorporating conductive nanomaterials to assist electro-oxidation, leading to an efficient conductive nano-sponge filtration device.

scholarly journals Fate of hydrocarbon pollutants in source and non-source control sustainable drainage systems

2013 ◽  
Vol 69 (4) ◽  
pp. 703-709 ◽  
Author(s):  
Georgios Roinas ◽  
Cath Mant ◽  
John B. Williams
Keyword(s):  
Organic Pollutants ◽  
Chemical Properties ◽  
Pollutant Removal ◽  
Total Petroleum Hydrocarbons ◽  
Source Control ◽  
Storm Events ◽  
Pollutant Loads ◽  
Significant Difference ◽  
Local Roads ◽  
Polycyclic Aromatic

Sustainable drainage (SuDs) is an established method for managing runoff from developments, and source control is part of accepted design philosophy. However, there are limited studies into the contribution source control makes to pollutant removal, especially for roads. This study examines organic pollutants, total petroleum hydrocarbons (TPH) and polycyclic aromatic hydrocarbons (PAHs), in paired source and non-source control full-scale SuDs systems. Sites were selected to cover local roads, trunk roads and housing developments, with a range of SuDs, including porous asphalt, swales, detention basins and ponds. Soil and water samples were taken bi-monthly over 12 months to assess pollutant loads. Results show first flush patterns in storm events for solids, but not for TPH. The patterns of removal for specific PAHs were also different, reflecting varying physico-chemical properties. The potential of trunk roads for pollution was illustrated by peak runoff for TPH of > 17,000 μg/l. Overall there was no significant difference between pollutant loads from source and non-source control systems, but the dynamic nature of runoff means that longer-term data are required. The outcomes of this project will increase understanding of organic pollutants behaviour in SuDs. This will provide design guidance about the most appropriate systems for treating these pollutants.

Sign in / Sign up

Export Citation Format

Share Document