scholarly journals Hydrothermal Synthesis of High Crystalline Silicalite from Rice Husk Ash

2015 ◽  
Vol 2015 ◽  
pp. 1-5 ◽  
Author(s):  
Chaiwat Kongmanklang ◽  
Kunwadee Rangsriwatananon
Keyword(s):  
Particle Size ◽  
Hydrothermal Synthesis ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Research Work ◽  
Crystallization Time ◽  
Silica Source ◽  
Ft Ir ◽  
Size And Morphology ◽  
Xrd Patterns

The objective of this research work was to evaluate the hydrothermal synthesis of silicalite with high crystallinity within a small particle size. The current study focused on investigating the effects of silica sources such as rice husk ash (RHA) and silica gel (SG), crystallization time, and ratios of NaOH/SiO2, H2O/NaOH, and SiO2/TPABr. The crystallinity, particle size, and morphology were characterized by FT-IR, XRD, particle size analyser, and SEM. The conclusion of the main findings indicated that the XRD patterns of these samples clearly showed a pure phase of MFI structure corresponding to FT-IR spectra with vibration mode at 550 and 1223 cm−1. The highest crystallinity was obtained at reaction time only 6 hours with the mole ratios of NaOH/SiO2, H2O/NaOH and SiO2/TPABr as 0.24, 155, and 30, respectively. When SG was used as a silica source, it was found that the particle size was smaller than that from RHA. The morphologies of all silicalite samples were coffin and cubic-like shape.

Investigations of Physical and Optical Properties on Glass from Rice Husk Ash Doped with MnO2

2013 ◽  
Vol 770 ◽  
pp. 14-17 ◽  
Author(s):  
Smit Insiripong ◽  
Nattapon Srisittipokakun ◽  
Keerati Kirdsiri ◽  
Jakrapong Kaewkhao
Keyword(s):  
Refractive Index ◽  
Optical Properties ◽  
Rice Husk ◽  
Glass Sample ◽  
Rice Husk Ash ◽  
Research Work ◽  
Glass Production ◽  
Silica Source ◽  
Doped Glasses ◽  
Mn Doped

In this research work, physical and optical properties on glass prepared from rice husk ash (RHA) doped with MnO2 glasses were in investigated. RHA was sintered at 1,000 °C and use as a silica source for glass production. The glass sample were prepared and doped with different concentrations of MnO2 ranging from 0.0 to 1.0 mol%. The results are shown that the colors of glass samples were altered from colorless to brown with increasing of MnO2 concentration. Refractive index and density were increased with increasing MnO2 concentration. The absorption peaks at 440 nm were obtained for all Mn doped glasses.

A Simple Dissolved Metals Mixing Route to Prepare Nanostructured Mg0.8Zn0.2TiO3 Solid Solution

2015 ◽  
Vol 1112 ◽  
pp. 47-52 ◽  
Author(s):  
Frida Ulfah Ermawati ◽  
Suasmoro Suasmoro ◽  
Suminar Pratapa
Keyword(s):  
Solid Solution ◽  
Particle Size ◽  
Rietveld Analysis ◽  
Dissolved Metals ◽  
Intermediate Phases ◽  
Particle Size Analyzer ◽  
Ft Ir ◽  
Xrd Patterns ◽  
Zn Ions

A study of liquid mixing route to synthesize high purity Mg0.8Zn0.2TiO3 nanopowder, a candidate dielectric ceramics, has been successfully performed. Formation of the phases on the dried powder was studied using TG/DTA, XRD and FT-IR data. Rietveld analysis on the collected XRD patterns confirmed the formation of solid solution in the system. Such solid solution can be obtained from the powder calcined at 500 °C, but calcination at 550 °C gave rise to the most optimum molar purity up to 98.5% without intermediate phases. The role of Zn ions on the formation of solid solution was also discussed. Homogeneity of particle size distribution and nano-crystallinity of the system was verified from the particle size analyzer data, TEM image and the Rietveld analysis output.

scholarly journals Synthesis of Silica-Salen Derivative from Rice Husk Ash and its Use for Extraction of Divalent Metal Ions Co(II), Ni(II) and Cu(II)

2019 ◽  
Vol 20 (1) ◽  
pp. 16 ◽  
Author(s):  
Duha Hussien Attol ◽  
Hayder Hamied Mihsen
Keyword(s):  
Metal Ions ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Sol Gel ◽  
Xrd Analysis ◽  
Divalent Metal Ions ◽  
Prepared Compound ◽  
Absorption Bands ◽  
Pseudo Second Order ◽  
Ft Ir

Rice husk ash (RHA) was used to prepare sodium silicate, which in turn was functionalized with 3-(chloropropyl)triethoxysilane employing the sol-gel technique to form RHACCl. Chloro group in RHACCl was replaced with iodo group forming RHACI. Ethylenediamine was immobilized on RHACI in order to prepare it for the reaction with salicylaldehyde to form a silica derivative-salen. FT-IR analysis indicated the presence of secondary amine and –NH and C=N absorption bands. XRD analysis revealed the occurrence of the broad diffused peak with maximum intensity at 22–23° (2θ). BET measurements showed also that the surface area of the prepared compound is 274.55 m2/g. Elemental analysis proved the existence of nitrogen in the structure of the prepared compound. The silica derivative-salen showed high potential for extraction and removal of heavy contaminating metal ions Ni(II), Cu(II), and Co(II) from aqueous solutions. The kinetic study demonstrates that the adsorption of the metal ions follows the pseudo-second order.

scholarly journals Optimization of nanostructured/nano sized rice husk ash preparation

2020 ◽  
Vol 17 (3(Suppl.)) ◽  
pp. 0953
Author(s):  
Medhat Mostafa ◽  
Hamdy Salah ◽  
Amro B. Saddek ◽  
Nabila Shehata
Keyword(s):  
Particle Size ◽  
Rice Husk ◽  
Amorphous Silica ◽  
Particle Shape ◽  
Rice Husk Ash ◽  
Loss On Ignition ◽  
Shape Distribution ◽  
Disk Mill ◽  
Grinding Time

The objective of the study is developing a procedure for production and characterization of rice husk ash (RHA). The effects of rice husk (RH) amount, burning/cooling conditions combined with stirring on producing of RHA with amorphous silica, highest SiO2, lowest loss on ignition (LOI), uniform particle shape distribution and nano structured size have been studied. It is concluded that the best amount is 20 g RH in 125 ml evaporating dish Porcelain with burning for 2 h at temperature 700 °C combined with cooling three times during burning to produce RHA with amorphous silica, SiO2 90.78% and LOI 1.73%. On the other hand, cooling and stirring times affect the variation of nano structured size and particle shape distribution. However, no crystalline phases were found in RHA in all cases. Results proved that the Attritor ball mill was more suitable than vibration disk mill for pulverizing nano structured RHA with 50% of particle size (D50) lower than 45 mm and 99 % of particle size (D99) lower than 144 mm to nanosized RHA with D50 lower than 36 nm and D99 lower than 57 nm by grinding time 8.16 min to every 1 g RHA without changes in morphousity of silica.

Coral-like hydroxy sodalite particles from rice husk ash as silica source

2011 ◽  
Vol 65 (23-24) ◽  
pp. 3408-3410 ◽  
Author(s):  
Milan Kanti Naskar ◽  
Debtosh Kundu ◽  
Minati Chatterjee
Keyword(s):  
Rice Husk ◽  
Rice Husk Ash ◽  
Silica Source

Effect of Flyash- Rice Husk Ash Blend in the Energy Efficient Geopolymer Tiles Using Industrial Wastes

2022 ◽  
Vol 1048 ◽  
pp. 403-411
Author(s):  
A. Chithambar Ganesh ◽  
K. Mukilan ◽  
B.P.V. Srikar ◽  
L.V.S. Teja ◽  
K.S.V. Prasad ◽  
...  
Keyword(s):  
Rice Husk ◽  
Energy Efficient ◽  
Building Materials ◽  
Rice Husk Ash ◽  
Research Work ◽  
Industrial Wastes ◽  
Modulus Of Rupture ◽  
Ceramic Tiles ◽  
Heat Curing ◽  
Intensive Approach

Infrastructural developments are inevitable for the developing countries and hence the production of sustainable building materials is promoted worldwide. Sustainable development in the vicinity of tiles is bewildered for more than a decade. Production of conventional tiles such as cement concrete tiles, clay tiles and ceramic tiles is energy intensive approach and levies lot of strain over the adjunct ecosystem. On the other hand there are serious problems related to the disposal of flyash, Rice Husk Ash throughout the world. An approach has been taken to synthesis tiles based on these industrial byproducts as the base materials through Geopolymer technology. In this work, Geopolymer mortar after heat curing is applied as tiles. In this work, Flyash is replaced by Rice Husk Ash in various proportions such as 20, 40, 60, 80 and 100 percent. Tests such as workability, flatness, straightness, perpendicularity, water absorption, modulus of rupture and abrasion are conducted and fair results are obtained. This research also portrays the effect of Rise Husk Ash addition over the flyash based Geopolymer binder in the utility as tiles. The findings of this research work encourages the development of energy efficient tiles using industrial wastes. Keywords: Geopolymer, Rice Husk Ash, Tiles

Formation of Ferrosilicon Alloy at 1550°C via Carbothermic Reduction of SiO2 by Coal and Graphite: Implication for Rice Husk Ash Utilization

2021 ◽  
Vol 315 ◽  
pp. 16-24
Author(s):  
Somyote Kongkarat ◽  
Meekaruna Boonyaratchinda ◽  
Chirakit Chobtham
Keyword(s):  
Rice Husk ◽  
Carbothermic Reduction ◽  
Rice Husk Ash ◽  
Molar Ratio ◽  
Alloy Formation ◽  
Silica Source ◽  
Commercial Method ◽  
Agricultural Industries ◽  
Si Content ◽  
Mixed Samples

Ferrosilicon alloy has been commercially produced in an electric furnace at 1700 - 1750 °C, using quartz as a silica source. With an aim to reduce production cost, rice husk ash (RHA) had been introduced to the process as a silica source. The present study reports an in-depth investigation on the ferrosilicon alloy formation at 1550 °C via carbothermic reduction using RHA with coal and graphite. Blend A: RHA/Fe2O3/Coal and B: RHA/Fe2O3/Graphite were prepared according to the C/O molar ratio of 1/1. The well-mixed samples were compacted into a pellet and then heated at 1550 °C in the tube furnace for 30 and 60 minutes while the argon flowing at the rate of 1 L/min. XRD and SEM results show that the bulk metal mainly composes of FeSi phase, while SiC and other slag phases adhere at the surface of the droplet. Characteristics of the carbonaceous materials, especially ash oxides content affect the kinetic of ferrosilicon formation. Silicon concentration in the produced metal droplets was measured using an ICP technique. For blend A, Si content in the metal was 18.3 wt% and 81.9 wt% after 30 and 60 minutes, respectively. While, Si recovery in the metal for blend B reached 88.4 wt% since 30 minutes. The experimental results show that the production of ferrosilicon alloy from RHA can be produced at 1550 °C, which the temperature lower than that of the commercial method by 150-200 °C. The finding in this research is beneficial for ferrosilicon and agricultural industries and thus promotes the sustainable steelmaking industry.

scholarly journals Bacterial Compatibility/Toxicity of Biogenic Silica (b-SiO2) Nanoparticles Synthesized from Biomass Rice Husk Ash

Nanomaterials ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 1440 ◽  
Author(s):  
Sanjeev K. Sharma ◽  
Ashish R. Sharma ◽  
Sudheer D. V. N. Pamidimarri ◽  
Jyotshana Gaur ◽  
Beer Pal Singh ◽  
...  
Keyword(s):  
Rice Husk ◽  
Photoelectron Spectroscopy ◽  
Biogenic Silica ◽  
Rice Husk Ash ◽  
Sio2 Nanoparticles ◽  
High Porosity ◽  
Xps Spectra ◽  
X Ray ◽  
Xrd Patterns ◽  
Sio2 Nanopowder

Biogenic silica (b-SiO2) nanopowders from rice husk ash (RHA) were prepared by chemical method and their bacterial compatibility/toxicity was analyzed. The X-ray diffractometry (XRD) patterns of the b-SiO2 nanopowders indicated an amorphous feature due to the absence of any sharp peaks. Micrographs of the b-SiO2 revealed that sticky RHA synthesized SiO2 nanopowder (S1) had clustered spherical nanoparticles (70 nm diameter), while b-SiO2 nanopowder synthesized from red RHA (S2) and b-SiO2 nanopowder synthesized from brown RHA (S3) were purely spherical (20 nm and 10 nm diameter, respectively). Compared to the S1 (11.36 m2g−1) and S2 (234.93 m2g−1) nanopowders, the S3 nanopowders showed the highest surface area (280.16 m2g−1) due to the small particle size and high porosity. The core level of the X-ray photoelectron spectroscopy (XPS) spectra showed that Si was constituted by two components, Si 2p (102.2 eV) and Si 2s (153.8 eV), while Oxygen 1s was observed at 531.8 eV, confirming the formation of SiO2. The anti-bacterial activity of the b-SiO2 nanopowders was investigated using both gram-positive (Escherichia coli) and gram-negative (Staphylococcus aureus) microorganisms. Compared to S2 and S3 silica nanopowders, S1 demonstrated enhanced antibacterial activity. This study signifies the medical, biomedical, clinical, and biological importance and application of RHA-mediated synthesized b-SiO2.

Facile Synthesis and Characterization of Fe-Co Nanoparticles Supported Silica Rice Husk

2016 ◽  
Vol 709 ◽  
pp. 66-69
Author(s):  
Jeyashelly Andas ◽  
Rahmah Atikah Rosdi ◽  
Nur Izzati Mohd Anuar
Keyword(s):  
Particle Size ◽  
Rice Husk ◽  
Sol Gel ◽  
Average Particle Size ◽  
Average Particle ◽  
Silica Source ◽  
Transmission Electron ◽  
Particle Size Analyzer ◽  
Bimetallic Materials ◽  
Co Nanoparticles

A series of Fe-Co nanoparticles were synthesized via sol-gel route at acidic, neutral and basic condition using rice husk as the silica source. The synthesized nanomaterials were designated as Fe-Co3, Fe-Co7 and Fe-Co9 and characterized by Fourier Transform Infrared (FTIR), Transmission Electron Microscope (TEM) and particle size analyzer. The great effect of pH was clearly evidenced from the shifting in the siloxane bond in the FTIR spectrum. TEM investigation confirmed the existence of discrete and almost sphere like nanoparticles. The particle size decreased with an increase in the pH, registering the smallest average particle size at pH 9. In brief, this study promises a fast, rapid and promising method for the conversion of silica rice husk into nanoscale bimetallic materials.

scholarly journals Effects of Sintering Temperature Variation on Synthesis of Glass-Ceramic Phosphor Using Rice Husk Ash as Silica Source

Materials ◽  
2020 ◽  
Vol 13 (23) ◽  
pp. 5413
Author(s):  
Rabiatul Adawiyah Abdul Wahab ◽  
Mohd Hafiz Mohd Zaid ◽  
Sidek Hj. Ab Aziz ◽  
Khamirul Amin Matori ◽  
Yap Wing Fen ◽  
...  
Keyword(s):  
Rice Husk ◽  
Glass Ceramic ◽  
Rice Husk Ash ◽  
Glass Ceramics ◽  
Xrd Analysis ◽  
Sintering Process ◽  
X Ray Diffraction ◽  
Silica Source ◽  
Quenching Method

In this study, the authors attempted to propose the very first study on fabrication and characterization of zinc-boro-silicate (ZBS) glass-ceramics derived from the ternary zinc-boro-silicate (ZnO)0.65(B2O3)0.15(RHA)0.2 glass system through a conventional melt-quenching method by incorporating rice husk ash (RHA) as the silica (SiO2) source, followed by a sintering process. Optimization of sintering condition has densified the sintered samples while embedded beta willemite (β-Zn2SiO4) and alpha willemite (α-Zn2SiO4) were proven in X-ray diffraction (XRD) analysis. Field emission scanning electron microscopy (FESEM) has shown the distribution of willemite crystals in rhombohedral shape crystals and successfully form closely-packed grains due to intense crystallization. The photoluminescence (PL) spectra of all sintered ZBS glasses presented various emission peaks at 425, 463, 487, 531, and 643 nm corresponded to violet, blue, green, and red emission, respectively. The correlation between the densification, phase transformation, microstructure, and photoluminescence of Zn2SiO4 glass-ceramic phosphor is discussed in detail.

Sign in / Sign up

Export Citation Format

Share Document