scholarly journals Vibration Analysis and Experimental Research of the Linear-Motor-Driven Water Piston Pump Used in the Naval Ship

2016 ◽  
Vol 2016 ◽  
pp. 1-13
Author(s):  
Ye-qing Huang ◽  
Song-lin Nie ◽  
Hui Ji ◽  
Shuang Nie
Keyword(s):  
Resonance Frequency ◽  
Low Frequency ◽  
Linear Motor ◽  
Vibration Characteristics ◽  
Piston Pump ◽  
Response Analysis ◽  
Design And Optimization ◽  
Naval Ship ◽  
Vibration Experiment ◽  
Low Efficiency

Aiming at the existing problems of traditional water piston pump used in the naval ship, such as low efficiency, high noise, large vibration, and nonintelligent control, a new type of linear-motor-driven water piston pump is developed and its vibration characteristics are analyzed in this research. Based on the 3D model of the structure, the simulation analyses including static stress analysis, modal analysis, and harmonic response analysis are conducted. The simulation results reveal that the mode shape under low frequency stage is mainly associated with the eccentricity swing of the piston rod. The vibration experiment results show that the resonance frequency of linear-motor-driven water piston pump is concentrated upon 500 Hz and 800 Hz in the low frequency range. The dampers can change the resonance frequency of the system to a certain extent. The vibration under triangular motion curve is much better than that of S curve, which is consistent with the simulation conclusion. This research provides an effective method to detect the vibration characteristics and a reference for design and optimization of the linear-motor-driven water piston pump.

Generating Characteristics of a Cantilever-Type Unimorph Piezoelectric Generator Depending on the Material and Mass

2011 ◽  
Vol 110-116 ◽  
pp. 217-224 ◽  
Author(s):  
C.H. Park ◽  
J.W. Kim ◽  
S.S. Jeong ◽  
M.H. Kim ◽  
T.G. Park ◽  
...  
Keyword(s):  
Resonance Frequency ◽  
Modal Analysis ◽  
Output Power ◽  
Simple Structure ◽  
Low Frequency ◽  
Piezoelectric Generator ◽  
Vibration Experiment ◽  
Output Characteristics ◽  
High Output

Structure of a cantilever-type unimorph piezoelectric generator was proposed and designed so as to allow the generator to resonate at frequencies lower than commercial frequencies. This generator is capable of generating amount of voltage its despite low frequency and simple fabrication that result from its simple structure. In this paper, the resonance characteristics of the generator depending on significant parameters were determined through a modal analysis and the influence of each parameter was analyzed to define each its level of sensitivity on the high output characteristics using ANSYS, a FEM program. The generators resonated at frequencies lower than 60 [Hz], as determined through the FEM results. The generating characteristics were then defined by implementing vibration experiment and comparing the results with those from the analysis. The resonance frequency and output power depending on changes in the mass and material were determined by the analysis.

Frequency Response Analysis of Piecewise Nonlinear Vibration Isolator

2005 ◽  
Author(s):  
Patrick Stahl ◽  
G. Nakhaie Jazar
Keyword(s):  
Low Frequency ◽  
High Amplitude ◽  
Relative Displacement ◽  
Response Analysis ◽  
Frequency Response Analysis ◽  
State Behavior ◽  
Vibration Isolators ◽  
Short Period ◽  
Secondary Suspension ◽  
Low Amplitude

Non-smooth piecewise functional isolators are smart passive vibration isolators that can provide effective isolation for high frequency/low amplitude excitation by introducing a soft primary suspension, and by preventing a high relative displacement in low frequency/high amplitude excitation by introducing a relatively damped secondary suspension. In this investigation a linear secondary suspension is attached to a nonlinear primary suspension. The primary is assumed to be nonlinear to model the inherent nonlinearities involved in real suspensions. However, the secondary suspension comes into action only during a short period of time, and in mall domain around resonance. Therefore, a linear assumption for the secondary suspension is reasonable. The dynamic behavior of the system subject to a harmonic base excitation has been analyzed utilizing the analytic results derived by applying the averaging method. The analytic results match very well in the transition between the two suspensions. A sensitivity analysis has shown the effect of varying dynamic parameters in the steady state behavior of the system.

A Novel Broadband Vibration Energy Harvester

2014 ◽  
Vol 644-650 ◽  
pp. 3560-3563
Author(s):  
Yu Liu ◽  
Xiao Yan He ◽  
Shen Liu ◽  
Ying Wu ◽  
Yi Ou
Keyword(s):  
Resonance Frequency ◽  
Energy Harvester ◽  
Engineering Application ◽  
Low Frequency ◽  
Structure Design ◽  
Vibration Energy ◽  
Vibration Energy Harvester ◽  
Collector Efficiency ◽  
Energy Acquisition ◽  
Mode Energy

A single resonance frequency is the main factor of limiting vibration energy collector efficiency. In this paper, the multi degree of freedom oscillation adjusting bandwidth scheme is reported, designing a kind of new broadband vibration energy harvester, which has multi-mode energy acquisition, multi freedom vibration and broadband characteristics. Firstly, Broadband energy collector structure design. Secondly, Combining with the main vibration form, using the ANSYS carried out a detailed analysis of its working model. Finally, designing the prototype and doing some experimental verification, the results show that the designed energy collector with low frequency and wideband energy acquisition performance, the frequency domain of energy collection is 57.6 to 69.45HZ ,which break through the bottleneck of traditional single resonance frequency of energy acquisition, has a high value of theory and engineering application.

Design and optimization of acoustic liners with a shear grazing flow: OPAL software platform applications

2021 ◽  
Vol 263 (6) ◽  
pp. 152-163
Author(s):  
Remi Roncen ◽  
Pierre Vuillemin ◽  
Patricia Klotz ◽  
Frank Simon ◽  
Fabien Méry ◽  
...  
Keyword(s):  
Noise Reduction ◽  
Low Frequency ◽  
Small Scale ◽  
Software Platform ◽  
Total Size ◽  
Linearized Euler Equations ◽  
Design And Optimization ◽  
Acoustic Liners ◽  
Frequency Regime ◽  
Grazing Flow

In the context of noise reduction in diverse applications where a shear grazing flow is present (i.e., engine nacelle, jet pump, landing gear), improved acoustic liner solutions are being sought. This is particularly true in the low-frequency regime, where space constraints currently limit the efficiency of classic liner technology. To perform the required multi-objective optimization of complex meta-surface liner candidates, a software platform called OPAL was developed. Its first goal is to allow the user to assemble a large panel of parallel/serial assembly of unit acoustic elements, including the recent concept of LEONAR materials. Then, the physical properties of this liner can be optimized, relatively to given weighted objectives (noise reduction, total size of the sample, weight), for a given configuration. Alternatively, properties such as the different impedances of liner unit surfaces can be optimized. To accelerate the process, different nested levels of optimization are considered, from 0D analytical coarse designs in order to reduce the parameter space, up to 2D plan or axisymmetric high-order Discontinuous Galerkin resolution of the Linearized Euler Equations. The presentation will focus on the different aspects of liner design considered in OPAL, and present an application on different samples made for a small scale aeroacoustic bench.

Vibration Characteristics of Metamaterial Beams With Periodic Local Resonances

2014 ◽  
Vol 136 (6) ◽  
Author(s):  
M. Nouh ◽  
O. Aldraihem ◽  
A. Baz
Keyword(s):  
Band Gap ◽  
Low Frequency ◽  
Element Model ◽  
Small Mass ◽  
Vibration Characteristics ◽  
Structural Vibrations ◽  
Low Frequencies ◽  
Theoretical Predictions ◽  
Gap Characteristics ◽  
Unique Band

Vibration characteristics of metamaterial beams manufactured of assemblies of periodic cells with built-in local resonances are presented. Each cell consists of a base structure provided with cavities filled by a viscoelastic membrane that supports a small mass to form a source of local resonance. This class of metamaterial structures exhibits unique band gap behavior extending to very low-frequency ranges. A finite element model (FEM) is developed to predict the modal, frequency response, and band gap characteristics of different configurations of the metamaterial beams. The model is exercised to demonstrate the band gap and mechanical filtering capabilities of this class of metamaterial beams. The predictions of the FEM are validated experimentally when the beams are subjected to excitations ranging between 10 and 5000 Hz. It is observed that there is excellent agreement between the theoretical predictions and the experimental results for plain beams, beams with cavities, and beams with cavities provided with local resonant sources. The obtained results emphasize the potential of the metamaterial beams for providing significant vibration attenuation and exhibiting band gaps extending to low frequencies. Such characteristics indicate that metamaterial beams are more effective in attenuating and filtering low-frequency structural vibrations than plain periodic beams of similar size and weight.

scholarly journals Modeling and Optimization Study of a Tightly Integrated Rotary Electric Motor-Hydraulic Pump

2019 ◽  
Author(s):  
Garrett R. Bohach ◽  
Nishanth ◽  
Eric Severson ◽  
James D. Van de Ven
Keyword(s):  
Electric Motor ◽  
Piston Pump ◽  
Valve Timing ◽  
Hydraulic Pump ◽  
Detailed Model ◽  
Flow Rates ◽  
Design And Optimization ◽  
Piston Cylinder ◽  
Optimization Study ◽  
Four Quadrant

Abstract To meet the growing trend of electrification of mechanical systems, this paper presents a compactly integrated electric motor and hydraulic pump. The proposed application for this machine requires high flow rates at low pressure differentials and four quadrant operation. The hydraulic pump architecture selected for this machine is a radial ball piston pump. An inside impinged version of this architecture allows for efficient filling of the chambers and is radial balanced, both of which allow highspeed operation for increased power density. The radial ball piston pump is less expensive to manufacture and is radially more compact than a standard radial cylindrical piston pump. A model of the pump and the integrated electric motor have been created to study scaling relationships and drive detailed design and optimization. The scaling study considers how displacement is affected by pump diameter, and how the diameter and required torque change with angular velocity. The detailed model considers the effect of valve timing, piston-cylinder clearance, and pump geometry on the efficiency. The model is then exercised in an optimization of the machine parameters.

Nonlinear Vibration Characteristics of Helical Spring

2010 ◽  
Vol 29-32 ◽  
pp. 1317-1322
Author(s):  
Nan Nan Wang ◽  
You Fu Hou ◽  
Zu Zhi Tian
Keyword(s):  
Nonlinear Vibration ◽  
Constitutive Relations ◽  
Low Frequency ◽  
Vibration Characteristics ◽  
Rigid Body Dynamics ◽  
Helical Spring ◽  
Low Frequency Vibration ◽  
Near Resonance ◽  
Finite Element Technology ◽  
Dynamics Response

A helical spring has large deformation under the condition of near resonance, in order to obtain the nonlinear vibration characteristics, the single-integral constitutive relations of helical spring based on nonlinear theory are discussed firstly, then nonlinear dynamic characteristics of helical spring are analyzed based on finite element technology. Finally, the dynamic simulation associated with flexible characteristics for helical spring is studied in ADAMS. The results show that the maximum stress of helical spring appears at transition region between different radius which is consistent with fracture position actually. Flexible dynamic response of helical spring mainly behaves low frequency vibration which is different from rigid body dynamics response.

Tunable Nonlinear Band Gaps in a Sandwich-Like Meta-Plate

2021 ◽  
Author(s):  
Yu Xue ◽  
Jinqiang Li ◽  
Yu Wang ◽  
Fengming Li
Keyword(s):  
Band Gap ◽  
Vibration Suppression ◽  
Wave Attenuation ◽  
Structural Parameters ◽  
Low Frequency ◽  
Dispersion Analysis ◽  
Response Analysis ◽  
Working Mechanism ◽  
Frequency Wave ◽  
The Galerkin Method

Abstract This paper aims to explore the actual working mechanism of sandwich-like meta-plates by periodically attaching nonlinear mass-beam-spring (MBS) resonators for low-frequency wave absorption. The nonlinear MBS resonator consists of a mass, a cantilever beam and a spring that can provide negative stiffness in the transverse vibration of the resonator, and its stiffness is tunable by changing the parameters of the spring. Considering the nonlinear stiffness of the resonator, the energy method is applied to obtain the dispersion relation of the sandwich-like meta-plate and the band-gap bounds related to the amplitude of resonator is derived by dispersion analysis. For the finite sized sandwich-like meta-plate with the fully free boundary condition subjected to external excitations, its dynamic equation is also established by the Galerkin method. The frequency response analysis of the meta-plate is carried out by the numerical simulation, whose band-gap range demonstrates good agreement with the theoretical one. Results show that the band-gap range of the present meta-plate is tunable by the design of the structural parameters of the MBS resonator. Furthermore, by analyzing the vibration suppression of the finite sized meta-plate, it can be observed that the nonlinearity of resonators can widen the wave attenuation range of meta-plate.

Design and optimization of low frequency multilayer absorbing materials

2020 ◽  
Author(s):  
Jianxiao Li ◽  
Difei Liang ◽  
Weijia Li ◽  
Yun Wang ◽  
Qian Liu
Keyword(s):  
Low Frequency ◽  
Design And Optimization ◽  
Absorbing Materials
Sign in / Sign up

Export Citation Format

Share Document