scholarly journals Microbiological Sealing Analysis of a Tapered Connection and External Hexagon System

2017 ◽  
Vol 2017 ◽  
pp. 1-4 ◽  
Author(s):  
Gardel Nepomuceno Costa ◽  
Elizabeth Ferreira Martinez ◽  
Aluísio Martins de Oliveira Ruellas ◽  
Daiane Cristina Peruzzo ◽  
Júlio Cesar Joly ◽  
...  
Keyword(s):  
Descriptive Analysis ◽  
In Vitro Study ◽  
Positive Control ◽  
Negative Control ◽  
Microbiological Analysis ◽  
Significance Level ◽  
Implant Abutment ◽  
Bacterial Leakage ◽  
Tapered Connection

Considering the variety of implant connection systems available in the market and the contrasting literature regarding tapered connection systems in terms of bacterial leakage, the aim of this in vitro study was to compare the effectiveness of the bacterial seal at the implant/abutment interface between an external hexagon and a tapered connection system. Twelve sets of indexed tapered connection components and twelve sets of external hexagon connection components were used for microbiological analysis. In addition, for each model, an implant with its respective prosthetic abutment was used as a negative control and another as a positive control of microbial contamination. Failure of the abutment/implant interface seal was observed via turbidity or presence of deposits in the culture. Descriptive analysis of the data and relative frequency (percentage) as well as Fisher’s exact test were used at a significance level of 5%. Two of ten (20%) external hexagon specimens showed contamination against 0/10 (0%) tapered connection implants. In conclusion, both implant/abutment connections were able to prevent bacterial leakage in vitro.

scholarly journals Microbiological Seal of Two Types of Tapered Implant Connections

2016 ◽  
Vol 27 (3) ◽  
pp. 273-277 ◽  
Author(s):  
Wheslley M. Peruzetto ◽  
Elizabeth F. Martinez ◽  
Daiane C. Peruzzo ◽  
Júlio Cesar Joly ◽  
Marcelo H. Napimoga
Keyword(s):  
Bacterial Contamination ◽  
Positive Control ◽  
Negative Control ◽  
Microbiological Analysis ◽  
Culture Dish ◽  
Significant Difference ◽  
Implant Abutment ◽  
Prosthetic Component ◽  
Bacterial Leakage

Abstract Tapered implant connections have gained wide popularity for being more resistant to fatigue and for promoting a better seal against bacterial infiltration than conventional connections. The aim of this study was to evaluate the bacterial seal at the implant-abutment interface using two Morse taper implant models, by in vitro microbiological analysis. Eleven non-indexed and 11 indexed abutments were selected and connected to their respective implants with a 20 N torque, according to manufacturer's recommendation. Microbiological analysis was carried out using colonies of Escherichia coli transported directly from a culture dish to the prosthetic component. For control, one non-contaminated abutment-implant set from each group (negative control) and one contaminated implant with no abutment (positive control) were used. The specimens were immersed in BHI broth and maintained in an incubator at 37 °C for 14 days to assess the development of bacterial contamination. The results revealed that 36.4% (n=4) of the indexed components and 90.9% (n=10) of the non-indexed components allowed bacterial leakage, with significant difference between groups (p=0.0237). In conclusion, both tapered components failed to provide adequate sealing to bacterial leakage, although the indexed type components showed a superior seal compared with non-indexed components.

scholarly journals Association between implant abutment microgap and implant circularity to bacterial leakage - an in vitro study using tapered connection implants

2018 ◽  
Vol 29 ◽  
pp. 294-294
Author(s):  
Eduardo Claudio Lopes de Chaves E. Mello Dias ◽  
Marcelo Sperandio ◽  
Marcelo Henrique Napimoga
Keyword(s):  
In Vitro Study ◽  
Vitro Study ◽  
Implant Abutment ◽  
Bacterial Leakage ◽  
Tapered Connection

scholarly journals Evaluation of coconut water neutralized by different agents on the viability of human fibroblasts: an in vitro study

2016 ◽  
Vol 45 (4) ◽  
pp. 234-239 ◽  
Author(s):  
Priscilla Barbosa Ferreira SOARES ◽  
Aletheia Moraes ROCHA ◽  
Manuella Verdinelli de Paula REIS ◽  
Camilla Christian Gomes MOURA ◽  
Carlos José SOARES
Keyword(s):  
Cell Viability ◽  
Tap Water ◽  
Human Fibroblasts ◽  
In Vitro Study ◽  
Positive Control ◽  
Negative Control ◽  
Coconut Water ◽  
Ph Adjustment ◽  
Adjustment Method

Abstract Objective This study evaluated four types of pH adjustment of the coconut water (CW) on viability of human fibroblasts (HFF). Material and method Natural and industrialized CW were adjusted to pH 7.0 using: (1) Sodium Hidroxide (NaOH), (2) Sodium bicarbonate (NaHCO3), (3) Triethanolamine (C6H15NO3), (4) 2-Amino-2-Methil-1-Propanol (C4H11NO). Fibroblasts were plated at 2×104/ well in 96 well plates and maintained in the CW solutions for 2 h and 4 h. Positive control was represented by HFF maintained in DMEM and the negative control by tap water. Cell viability was analyzed by MTT formazan method. Data were analyzed by 3-way ANOVA followed by Tukey’s and Dunnet’s test. Result There are no significant effect on the cell viability regarding type of CW, period of evaluation, and the interactions between CW and period of evaluation, CW and pH adjustment method, pH adjustment method and period of evaluation (p>0.05). Conclusion The product used for CW pH adjustment did not influenced HFF viability, thought there are a tendency of better performance in natural CW.

Evaluating Dentin Surface Treatments for Resin-Modified Glass Ionomer Restorative Materials

2013 ◽  
Vol 38 (4) ◽  
pp. 429-438 ◽  
Author(s):  
TA Imbery ◽  
A Namboodiri ◽  
A Duncan ◽  
R Amos ◽  
AM Best ◽  
...  
Keyword(s):  
Testing Machine ◽  
In Vitro Study ◽  
Positive Control ◽  
Negative Control ◽  
Surface Treatments ◽  
Band Matrices ◽  
Dentin Surface ◽  
Occlusal Surfaces ◽  
Significant Difference

SUMMARY This in vitro study evaluated the effect of six surface treatments on the shear bond strength of three resin-modified glass ionomers (RMGIs) to dentin. Occlusal surfaces of caries-free third molars were reduced to expose only dentin. Surface treatments were smear layer intact (negative control), Cavity Conditioner, EDTA, Ketac Primer, Self Conditioner, and etching with 35% phosphoric acid followed by the application of Optibond Solo Plus. Filtek Z250 composite resin bonded with Optibond Solo Plus served as a positive control. Conditioning agents were used according to the manufacturers' instructions. After surface treatments, Fuji II LC, Riva LC, Ketac Nano, and Filtek Z250 were placed in copper-band matrices 5 mm in diameter and 2 mm in height and were light-cured for 20 seconds. Specimens were stored in 100% humidity for 24 hours, after which they were placed in deionized water for 24 hours at 37°C. They were then tested under shear forces in an Instron Universal Testing Machine at a crosshead speed of 0.5 mm/min. A two-way analysis of variance and Tukey honestly significant difference statistical analyses (p<0.05) indicated significant interaction between RMGIs and conditioning agents. Acid etching followed by Optibond Solo Plus provided highest bond strengths for all three RMGIs, which were not statistically different from the positive control.

Effect of Different Intermediary Bases on Microleakage of a Restorative Material in Class II Box Cavities of Primary Teeth

2017 ◽  
Vol 40 (2) ◽  
pp. 82-87 ◽  
Author(s):  
Faika Y. Abdelmegid ◽  
Fouad S. Salama ◽  
Waleed M. Al-Mutairi ◽  
Saud K. Al-Mutairi ◽  
Sultan O. Baghazal
Keyword(s):  
Primary Teeth ◽  
In Vitro Study ◽  
Class Ii ◽  
Positive Control ◽  
Negative Control ◽  
The Other ◽  
Control Groups ◽  
Significant Difference ◽  
The Mean

Introduction The aim of this in vitro study was to assess and compare the effect of different intermediary bases on microleakage between tooth and a nanocomposite interface in Class II box cavities in primary teeth. Methods Standard Class II box cavities were prepared in 52 primary molars and randomly divided into 9 groups according to the intermediary base used (Multicore Flow, Fuji II LC, SDR, Smart Dentin Replacement, and Biodentine). All specimens were subjected to thermocycling and prepared for microleakage testing and evaluation. Results There was significant difference in the mean ranks of microleakage between the 9 groups, which was observed in the gingival side (p<0.0001) and the occlusal side (p<0.0001). The mean ranks microleakage was significantly higher with experimental SDR, experimental Multicore Flow, and positive control materials when compared with the other 6 groups. The microleakage mean ranks were statistically significantly lower in experimental Fuji II LC, experimental Biodentine, and all negative control groups when compared with the other 3 groups. Conclusions Microleakage is affected by the application of intermediate material. Experimental Biodentine and Fuji II LC showed the lowest microleakage while experimental SDR and experimental Multicore Flow showed the highest microleakage.

scholarly journals In vitro antimicrobial evaluation of toothpastes with natural compounds

2015 ◽  
Vol 09 (04) ◽  
pp. 580-586 ◽  
Author(s):  
Priscila de Camargo Smolarek ◽  
Luis Antonio Esmerino ◽  
Ana Cláudia Chibinski ◽  
Marcelo Carlos Bortoluzzi ◽  
Elizabete Brasil dos Santos ◽  
...  
Keyword(s):  
Therapeutic Potential ◽  
In Vitro Study ◽  
Study Groups ◽  
Natural Compounds ◽  
Antimicrobial Activities ◽  
Positive Control ◽  
Negative Control ◽  
Diffusion Method ◽  
Disk Diffusion Method

ABSTRACT Objectives: This in vitro study evaluated the antimicrobial effects of commercial toothpastes containing natural compounds. Materials and Methods: The study groups were divided based on the natural compound present in the toothpaste composition: Sorbitol (I), tocopherol (II), mint (III), cinnamon/mint (IV), propolis/melaleuca (V), mint/açai (VI), mint/guarana (VII), propolis (VIII), negative control (IX), and the positive control (X). The antimicrobial properties of the toothpastes were tested using the disk diffusion method against oral pathogens: Streptococcus mutans, Pseudomonas aeruginosa, and Enterococcus faecalis. The resulting inhibition halos were measured in millimeters. Results: The data indicated that the bacteria responded differently to the toothpastes (P < 0.0001). The diameters of the inhibition halos against S. mutans were in decreasing order of efficacy: Propolis/melaleuca > mint/guarana > mint/açai > sorbitol > tocopherol > cinnamon/mint > propolis > mint (P < 0.001 vs. negative control). E. faecalis showed variable responses to the dentifrices in the following order of decreasing efficacy: Mint/guarana > propolis > sorbitol > mint/açai > tocopherol > cinnamon/mint > mint = propolis/melaleuca = negative control. The product with the highest antimicrobial activity was mint/guarana, which was significantly different than propolis/melaleuca, mint, cinnamon/mint, and tocopherol and negative control (P < 0.001). The statistical analysis indicated that propolis, sorbitol, and mint/açai did not show any differences compared to mint/guarana (P > 0.05) and positive control (P > 0.05). P. aeruginosa was resistant to all dental gels tested including positive control. Conclusion: The toothpastes with natural compounds have therapeutic potential and need more detailed searches for the correct clinic therapeutic application. The results from this study revealed differences in the antimicrobial activities of commercial toothpastes with natural compounds.

In Vitro Study on Protoscolicidal Effect of Methanolic Extract of Allium hirtifolium on Protoscoleces of Cystic Echinococcosis

2019 ◽  
Vol 19 (3) ◽  
pp. 264-268
Author(s):  
Z. Shahamir Tabatabaei ◽  
S. Dehshahri ◽  
M.M. Taghi ◽  
F. Esfandiari ◽  
F.S. Sadjjadi ◽  
...  
Keyword(s):  
Cystic Echinococcosis ◽  
Allium Sativum ◽  
Methanolic Extract ◽  
In Vitro Study ◽  
Cyst Formation ◽  
Positive Control ◽  
Negative Control ◽  
Cyst Rupture ◽  
Allium Hirtifolium

Background: Cystic echinococcosis/ hydatidosis is one of the most important parasitic zoonoses worldwide. Usually, surgery is used for the treatment of active cysts. Due to the risk of cyst rupture during surgery, a protoscolicidal agent is usually injected into the cyst before surgery to prevent secondary cyst formation in case of cyst rupture. Due to the side effects of chemical protoscolicidal agents attempts have been focused on herbal medicine. In this regard, Allium sativum has already been used; however, the protoscolicidal effect of Allium hirtifolium from Allium family has not been investigated, so far. Objective: The present study was conducted in order to assess the protoscolicidal effect of methanolic extract of Allium hirtifolium in different concentrations, temperature and exposure times. Cetrimide as a positive control and DMSO as a negative control were also used in this study. Methods: The viability of protoscoleces was determined by 0.1% eosin staining method. Results: The protoscolicidal effect of Allium hirtifolium on protoscoleces was as follows: The mean percent and standard deviation (SD) of protoscolicidal activity of 50 mg/ml concentration of Allium hirtifolium extract in room temperature at 10, 20, 30, 40 and 50 minutes of exposure was 5.88±2.39, 8.59±4.54, 11.82±5.81, 12.31±6.16and 16.96±8.42 respectively; while at 37°C it was 9.10±5.01, 11.52±7.36, 18.64±4.36, 27.07±6.57 and 38.15±12.80, respectively. Conclusion: In conclusion, although Allium hirtifolium from Allium family is similar to Allium sativum; the protoscolicidal effect of its methanolic extract is not similar and less than A. sativum extract.

Sign in / Sign up

Export Citation Format

Share Document