scholarly journals Apparent Surface Free Energy of Polymer/Paper Composite Material Treated by Air Plasma

2017 ◽  
Vol 2017 ◽  
pp. 1-8 ◽  
Author(s):  
Konrad Terpiłowski
Keyword(s):  
Surface Roughness ◽  
Free Energy ◽  
Plasma Treatment ◽  
Surface Properties ◽  
Surface Free Energy ◽  
Photoelectron Spectroscopy ◽  
Contact Angles ◽  
Air Plasma ◽  
Surface Plasma ◽  
Composite Surface

Surface plasma treatment consists in changes of surface properties without changing internal properties. In this paper composite polymer/paper material is used for production of packaging in cosmetic industry. There are problems with bonding this material at the time of packaging production due to its properties. Composite surface was treated by air plasma for 1, 10, 20, and 30 s. The advancing and receding contact angles of water, formamide, and diiodomethane were measured using both treated and untreated samples. Apparent surface free energy was estimated using the hysteresis (CAH) and Van Oss, Good, Chaudhury approaches (LWAB). Surface roughness was investigated using optical profilometry and identification of after plasma treatment emerging chemical groups was made by means of the XPS (X-ray photoelectron spectroscopy) technique. After plasma treatment the values of contact angles decreased which is particularly evident for polar liquids. Apparent surface free energy increased compared to that of untreated samples. Changes of energy value are due to the electron-donor parameter of energy. This parameter increases as a result of adding polar groups at the time of surface plasma activation. Changes of surface properties are combination of increase of polar chemical functional groups, increase on the surface, and surface roughness increase.

The Effects of Surface Modifications on Tin-Doped Indium Oxide Films: Optoelectrical, Wettability and XPS Investigations

2008 ◽  
Vol 373-374 ◽  
pp. 718-721
Author(s):  
Zhi You Zhong ◽  
Feng Lou Sun
Keyword(s):  
Free Energy ◽  
Sheet Resistance ◽  
Surface Properties ◽  
Surface Free Energy ◽  
Indium Oxide ◽  
Photoelectron Spectroscopy ◽  
Surface Modifications ◽  
Optical Transmittance ◽  
Contact Angles ◽  
Oxygen Plasma Treatment

Surface modifications were performed on the tin-doped indium oxide (ITO) substrates for optoelectronic devices, using the different processing techniques. The effects of modification methods on the surface properties of ITO substrates were characterized by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), ultraviolet-visible (UV-vis) spectrophotometer, standard goniometry and four-probe meter, respectively. The surface free energy as the sum of the dispersion and polar components was evaluated from the measured contact angles using the Owens-Wendt approach. Experimental results demonstrate that except the optical transmittance of the ITO, the surface properties including the stoichiometry, morphology, wettability and sheet resistance of the ITO substrates strongly depend on the modification methods. Compared with the other treatments, the oxygen plasma treatment increases the oxygen concentration and decreases the carbon concentration, reduces the surface roughness and the sheet resistance, and enhances the surface free energy and the polarity, and thereby more effectively improves the surface properties of ITO substrates.

scholarly journals Surface Properties of Pine Scrimber Panels with Varying Density

Coatings ◽  
2019 ◽  
Vol 9 (6) ◽  
pp. 397 ◽  
Author(s):  
Jinguang Wei ◽  
Qiuqin Lin ◽  
Yahui Zhang ◽  
Wenji Yu ◽  
Chung-Yun Hse ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Surface Properties ◽  
Photoelectron Spectroscopy ◽  
Lower Surface ◽  
Contact Angles ◽  
High Density ◽  
Water Contact ◽  
Change Rate ◽  
Hydrophilic Material ◽  
Wood Grain

Coating quality for scrimber products against exterior conditions is largely dependent on the surface properties. The wettability, morphology, and chemical composition of pine scrimber surfaces were investigated to better understand the surface properties. The scrimber was found to be a hydrophilic material because the water contact angles were less than 90°. The panels with a density of 1.20 g/cm3 had the largest angle change rate (k = 0.212). As the panel density increased, the instantaneous contact angle of each test liquid (i.e., water, formamide, and diiodomethane) on the panels decreased, and so did surface free energy. Panels with higher density showed lower surface roughness. Surface roughness across the wood grain was greater than that along the grain. SEM observations showed the high-density panels had a smoother surface with fewer irregular grooves in comparison with the low-density panels. X-ray photoelectron spectroscopy (XPS) analysis indicated that more unoxygenated groups appeared on the surface of high-density panels.

Nano-modification of plasma treated inkjet printing fabrics

2015 ◽  
Vol 27 (1) ◽  
pp. 159-169 ◽  
Author(s):  
Chunming Zhang ◽  
Xiaoping Zhang
Keyword(s):  
Mechanical Behavior ◽  
Surface Properties ◽  
Inkjet Printing ◽  
Photoelectron Spectroscopy ◽  
Breaking Strength ◽  
Contact Angles ◽  
Plasma Modification ◽  
Air Plasma ◽  
Bending Rigidity ◽  
Content Type

Purpose – Inkjet printing is becoming increasingly important and popular for the printing of textiles. As one of the environmentally friendly processes, the plasma has been widely used to modify the surface properties of inkjet printing substrates. The purpose of this paper is to investigate the nano-modification of plasma on polyester fabric for pigment inkjet printing. The actual printing performance and the related mechanical behavior of samples were also evaluated. Design/methodology/approach – Polyester fabrics were surface modified by atmospheric pressure air plasma with the aim to improve its inkjet printing performance. The effects of plasma treatment on surface properties of fabrics were characterized using X-ray photoelectron spectroscopy (XPS) and Scanning electron microscopy (SEM). The wettability of the samples is evaluated by measurement of contact angles of different polar liquids and surface energy. Breaking strength and elongation, bending rigidity are tested to evaluate the mechanical behavior of treated and control fabrics. Findings – It was found that the nano-modification of plasma markedly improved the anti-bleeding property of inkjet printing fabrics. SEM and XPS analyses indicated that this improved color performance was mainly contributed by not only the etching effect and oxygen containing polar groups induced onto fiber surfaces. In addition, the results of mechanical behavior test indicate no evident reduction of breaking strength and breaking elongation both in warp and weft direction after plasma modification. Originality/value – The surface modification method used here offers an economic and dependable way for pretreatment of inkjet printing fabrics with the advantages of environmental friendly over traditional pretreatment methods.

scholarly journals WETTING PROPERTIES OF CHITOSAN-MODIFIED AND PLASMA-TREATED PEEK SURFACES

2018 ◽  
Vol XXIII ◽  
pp. 159-169 ◽  
Author(s):  
Kacper Przykaza ◽  
Małgorzata Jurak ◽  
Agnieszka E. Wiącek
Keyword(s):  
Free Energy ◽  
Surface Free Energy ◽  
Contact Angle Hysteresis ◽  
Chitosan Film ◽  
Film Surface ◽  
Contact Angles ◽  
Biologically Active ◽  
Air Plasma ◽  
Wetting Properties ◽  
Total Surface Free Energy

In this paper, the wettability of chitosan/phospholipid (1,2-dipalmitoyl-sn-glycero-3-phosphocholine – DPPC), chitosan/lipid (cholesterol – Chol) and chitosan/protein (cyclosporine A – CsA) films on air plasma activated polyetheretherketone (PEEK) plates was studied. The layers were prepared using the solution spreading technique and their surface wetting properties were determined based on the measurements of the advancing and receding contact angles of water, formamide and diiodomethane. Moreover, based on the contact angle hysteresis model of Chibowski, values of total surface free energy were estimated. Significant changes in PEEK polarity were observed after plasma activation and modifications with Ch/DPPC, Ch/Chol and Ch/CsA layers. These molecules modulate the chitosan film surface by changing the type and magnitude of interactions, which is revealed in the values of surface free energy. These results may be important for the development and implementation of highly biocompatible bone substitution polymers coated with chitosan film with anti-fungal and anti-bactericidal properties. Those systems based on chitosan may also carry and release biologically active substances which could be relevant in the new generation of drug delivery systems.

Surface Characterization of Oxygen Plasma Treated Nano-SiO2 Sol-Gel Coating UHMWPE Filaments

2010 ◽  
Vol 658 ◽  
pp. 117-120 ◽  
Author(s):  
Ying Chen Zhang ◽  
Feng Jun Shi ◽  
Jian Xin He ◽  
Hong Yan Wu ◽  
Yi Ping Qiu
Keyword(s):  
Free Energy ◽  
Plasma Treatment ◽  
Ftir Spectroscopy ◽  
Surface Properties ◽  
Surface Free Energy ◽  
Atmospheric Pressure ◽  
Surface Characterization ◽  
Sol Gel ◽  
Atmospheric Pressure Plasma ◽  
Ultrahigh Molecular Weight Polyethylene

UHMWPE filaments have a low surface free energy and therefore often require a modification of their surface properties before any use. Atmospheric pressure plasmas treatment is a convenient and environmentally friendly way to obtain these modifications by introducing new chemical groups at the surface without affecting the bulk properties. This paper studies the influence of nano-SiO2 sol-gel coating pretreatment on atmospheric pressure plasma jet (APPJ) treatment of ultrahigh molecular weight polyethylene (UHMWPE) fibers when a mixture of 100% helium and 1% oxygen used as the treatment gas. The surface properties of the plasma-treated UHMWPE filaments are characterized using contact angle measurements and ATR-FTIR spectroscopy. The UHMWPE filaments show a remarkable increase in surface free energy after plasma treatment. ATR-FTIR spectroscopy of the plasma-treated UHMWPE filaments reveals that plasma treatment introduces oxygen-containing functionalities on the UHMWPE filaments surface leading to the increased surface free energy.

Surface modification of polyimide fibers by oxygen plasma treatment and interfacial adhesion behavior of a polyimide fiber/epoxy composite

2017 ◽  
Vol 24 (4) ◽  
pp. 477-484 ◽  
Author(s):  
Xuyang Sun ◽  
Junfeng Bu ◽  
Weiwei Liu ◽  
Hongqing Niu ◽  
Shengli Qi ◽  
...  
Keyword(s):  
Free Energy ◽  
Plasma Treatment ◽  
Surface Free Energy ◽  
Photoelectron Spectroscopy ◽  
Interfacial Adhesion ◽  
Oxygen Plasma ◽  
Dynamic Contact Angle ◽  
Epoxy Composites ◽  
Oxygen Plasma Treatment ◽  
Adhesion Properties

AbstractOxygen plasma was used to enhance the surface behavior of polyimide (PI) fibers and PI fiber-reinforced epoxy composites were prepared in our present work. The effects of plasma treating times on the surface properties of PI fiber and the interfacial adhesion of PI fiber/epoxy composites were investigated. Surface chemical composition, surface morphologies and surface free energy of the fibers were characterized by X-ray photoelectron spectroscopy, scanning electron microscopy and dynamic contact angle analysis, respectively. The results suggest that some oxygen functional groups were introduced onto PI fiber surfaces, and the surface roughness of fibers was enhanced. Resultantly, the surface free energy of fibers and the interfacial adhesion of composites were improved by the oxygen plasma treatment. The interlaminar shear strength of the composites increased to 70 MPa when the fibers were treated for 10 min, which proved good interfacial adhesion properties.

Characterisation of surface properties of chemical and plasma treated regenerated cellulose fabric

2012 ◽  
Vol 82 (20) ◽  
pp. 2078-2089 ◽  
Author(s):  
Zdenka Peršin ◽  
Alenka Vesel ◽  
Karin Stana Kleinschek ◽  
Miran Mozetič
Keyword(s):  
Plasma Treatment ◽  
Surface Properties ◽  
Photoelectron Spectroscopy ◽  
Research Work ◽  
Contact Angles ◽  
Alternative Activation ◽  
Oxygen Plasma Treatment ◽  
Regenerated Cellulose ◽  
Water Contact ◽  
Chemical Treatments

The aim of this research work was to study the surface properties and sorption characteristics of differently treated regenerated cellulose fabrics. Surface modifications of viscose, modal and lyocell samples caused by using standard chemical pre-treatment procedures were compared to an alternative activation procedure by applying low pressure oxygen plasma treatment. The elemental chemical composition of the modified fabric surfaces was investigated using X-ray photoelectron spectroscopy (XPS), while hydrophilic/hydrophobic properties were evaluated by determining the water contact angles, as well as thoroughly analysed using Owens–Wendt surface energy (SFE) and surface polarity investigations. Standard chemical and also plasma treatments changed the surface chemistry of cellulose. Bleaching and alkaline treatments increased the surface carboxylic acid content by approximately 4.8% while plasma treatment increased it by approximately 9.7%. As a consequence, higher hydrophilicity arises as proved by water contact angle decrease; i.e. 24% (61°) after standard chemical treatments and 70% (20°) after plasma treatment. Both chemical treatments increase the SFE and polar components, while the reduction of dispersive components was less pronounced. The oxygen activation treatment has the greatest influence on the SFEs of the samples as well as on polarity of the samples.

Bifunctional Composites for Biofilms Modulation on Cervical Restorations

2021 ◽  
pp. 002203452110181
Author(s):  
A.A. Balhaddad ◽  
I.M. Garcia ◽  
L. Mokeem ◽  
M.S. Ibrahim ◽  
F.M. Collares ◽  
...  
Keyword(s):  
Free Energy ◽  
Surface Free Energy ◽  
Contact Angles ◽  
Bacterial Biofilm ◽  
Dental Composite ◽  
Log P ◽  
Rrna Gene ◽  
Cervical Lesions ◽  
Biofilm Growth ◽  
Biofilm Development

Cervical composites treating root carious and noncarious cervical lesions usually extend subgingivally. The subgingival margins of composites present poor plaque control, enhanced biofilm accumulation, and cause gingival irritation. A potential material to restore such lesions should combine agents that interfere with bacterial biofilm development and respond to acidic conditions. Here, we explore the use of new bioresponsive bifunctional dental composites against mature microcosm biofilms derived from subgingival plaque samples. The designed formulations contain 2 bioactive agents: dimethylaminohexadecyl methacrylate (DMAHDM) at 3 to 5 wt.% and 20 wt.% nanosized amorphous calcium phosphate (NACP) in a base resin. Composites with no DMAHDM and NACP were used as controls. The newly formulated 5% DMAHDM–20% NACP composite was analyzed by micro-Raman spectroscopy and transmission electron microscopy. The wettability and surface-free energy were also assessed. The inhibitory effect on the in vitro biofilm growth and the 16S rRNA gene sequencing of survival bacterial colonies derived from the composites were analyzed. Whole-biofilm metabolic activity, polysaccharide production, and live/dead images of the biofilm grown over the composites complement the microbiological assays. Overall, the designed formulations had higher contact angles with water and lower surface-free energy compared to the commercial control. The DMAHDM-NACP composites significantly inhibited the growth of total microorganisms, Porphyromonas gingivalis, Prevotella intermedia/nigrescens, Aggregatibacter actinomycetemcomitans, and Fusobacterium nucleatum by 3 to 5-log ( P < 0.001). For the colony isolates from control composites, the composition was typically dominated by the genera Veillonella, Fusobacterium, Streptococcus, Eikenella, and Leptotrichia, while Fusobacterium and Veillonella dominated the 5% DMAHDM–20% NACP composites. The DMAHDM-NACP composites contributed to over 80% of reduction in metabolic and polysaccharide activity. The suppression effect on plaque biofilms suggested that DMAHDM-NACP composites might be used as a bioactive material for cervical restorations. These results may propose an exciting path to prevent biofilm growth and improve dental composite restorations’ life span.

Sign in / Sign up

Export Citation Format

Share Document