scholarly journals Radiation Transfer Calculations and Assessment of Global Warming by CO2

2017 ◽  
Vol 2017 ◽  
pp. 1-30 ◽  
Author(s):  
Hermann Harde
Keyword(s):  
Global Warming ◽  
Climate Sensitivity ◽  
Radiative Forcing ◽  
Radiation Transfer ◽  
Climate Model ◽  
Total Solar Irradiance ◽  
Atmospheric Conditions ◽  
Line Radiation ◽  
Long Wave ◽  
Specific Influence

We present detailed line-by-line radiation transfer calculations, which were performed under different atmospheric conditions for the most important greenhouse gases water vapor, carbon dioxide, methane, and ozone. Particularly cloud effects, surface temperature variations, and humidity changes as well as molecular lineshape effects are investigated to examine their specific influence on some basic climatologic parameters like the radiative forcing, the long wave absorptivity, and back-radiation as a function of an increasing CO2 concentration in the atmosphere. These calculations are used to assess the CO2 global warming by means of an advanced two-layer climate model and to disclose some larger discrepancies in calculating the climate sensitivity. Including solar and cloud effects as well as all relevant feedback processes our simulations give an equilibrium climate sensitivity of CS = 0.7°C (temperature increase at doubled CO2) and a solar sensitivity of SS = 0.17°C (at 0.1% increase of the total solar irradiance). Then CO2 contributes 40% and the Sun 60% to global warming over the last century.

scholarly journals Atmospheric Lifetimes, Infrared Absorption Spectra, Radiative Forcings and Global Warming Potentials of NF<sub>3</sub> and CFC-115

2016 ◽  
Author(s):  
Anna Totterdill ◽  
Tamás Kovács ◽  
Wuhu Feng ◽  
Sandip Dhomse ◽  
Christopher J. Smith ◽  
...  
Keyword(s):  
Global Warming ◽  
Cross Sections ◽  
Infrared Absorption ◽  
Radiative Forcing ◽  
Climate Model ◽  
Radiative Forcings ◽  
Atmospheric Window ◽  
Infrared Absorption Spectra ◽  
Global Warming Potentials ◽  
Good Agreement

Abstract. Fluorinated compounds such as NF3 and C2F5Cl (CFC-115) are characterised by very large global warming potentials (GWPs) which result from extremely long atmospheric lifetimes and strong infrared absorptions in the atmospheric window. In this study we have experimentally determined the infrared absorption cross-sections of NF3 and CFC-115, calculated the radiative forcing and efficiency using two radiative transfer models and identified the effect of clouds and stratospheric adjustment. The infrared cross sections are in good agreement with previous measurements, whereas the resulting radiative forcings and efficiencies are, on average, around 10 % larger. A whole atmosphere chemistry-climate model was used to determine the atmospheric lifetimes of NF3 and CFC-115 to be (616 ± 34) years and (492 ± 22) years, respectively. The GWPs for NF3 are estimated to be 14 600, 19 400 and 21 400 over 20, 100 and 500 years, respectively. Similarly, the GWPs for CFC-115 are 6120, 8060 and 8630 over 20, 100 and 500 years, respectively.

scholarly journals Description and basic evaluation of simulated mean state, internal variability, and climate sensitivity in MIROC6

2019 ◽  
Vol 12 (7) ◽  
pp. 2727-2765 ◽  
Author(s):  
Hiroaki Tatebe ◽  
Tomoo Ogura ◽  
Tomoko Nitta ◽  
Yoshiki Komuro ◽  
Koji Ogochi ◽  
...  
Keyword(s):  
Climate Variability ◽  
Climate Sensitivity ◽  
Radiative Forcing ◽  
Climate Model ◽  
Coupled Model ◽  
Climate Feedback ◽  
Climate Projections ◽  
Internal Climate Variability ◽  
Wide Range ◽  
Mean Climate

Abstract. The sixth version of the Model for Interdisciplinary Research on Climate (MIROC), called MIROC6, was cooperatively developed by a Japanese modeling community. In the present paper, simulated mean climate, internal climate variability, and climate sensitivity in MIROC6 are evaluated and briefly summarized in comparison with the previous version of our climate model (MIROC5) and observations. The results show that the overall reproducibility of mean climate and internal climate variability in MIROC6 is better than that in MIROC5. The tropical climate systems (e.g., summertime precipitation in the western Pacific and the eastward-propagating Madden–Julian oscillation) and the midlatitude atmospheric circulation (e.g., the westerlies, the polar night jet, and troposphere–stratosphere interactions) are significantly improved in MIROC6. These improvements can be attributed to the newly implemented parameterization for shallow convective processes and to the inclusion of the stratosphere. While there are significant differences in climates and variabilities between the two models, the effective climate sensitivity of 2.6 K remains the same because the differences in radiative forcing and climate feedback tend to offset each other. With an aim towards contributing to the sixth phase of the Coupled Model Intercomparison Project, designated simulations tackling a wide range of climate science issues, as well as seasonal to decadal climate predictions and future climate projections, are currently ongoing using MIROC6.

scholarly journals Global warming projections derived from an observation-based minimal model

2016 ◽  
Vol 7 (1) ◽  
pp. 51-70 ◽  
Author(s):  
K. Rypdal
Keyword(s):  
Global Warming ◽  
Conceptual Model ◽  
Radiative Forcing ◽  
Climate Model ◽  
Co2 Concentration ◽  
Observation Data ◽  
Policy Makers ◽  
Global Emission ◽  
Inertia Parameters ◽  
Intercomparison Project

Abstract. A simple conceptual model for the global mean surface temperature (GMST) response to CO2 emissions is presented and analysed. It consists of linear long-memory models for the GMST anomaly response ΔT to radiative forcing and the atmospheric CO2-concentration response ΔC to emission rate. The responses are connected by the standard logarithmic relation between CO2 concentration and its radiative forcing. The model depends on two sensitivity parameters, αT and αC, and two "inertia parameters," the memory exponents βT and βC. Based on observation data, and constrained by results from the Climate Model Intercomparison Project Phase 5 (CMIP5), the likely values and range of these parameters are estimated, and projections of future warming for the parameters in this range are computed for various idealised, but instructive, emission scenarios. It is concluded that delays in the initiation of an effective global emission reduction regime is the single most important factor that influences the magnitude of global warming over the next 2 centuries. The most important aspect of this study is the simplicity and transparency of the conceptual model, which makes it a useful tool for communicating the issue to non-climatologists, students, policy makers, and the general public.

scholarly journals An Investigation of the Connections among Convection, Clouds, and Climate Sensitivity in a Global Climate Model

2014 ◽  
Vol 27 (5) ◽  
pp. 1845-1862 ◽  
Author(s):  
Ming Zhao
Keyword(s):  
Climate Sensitivity ◽  
Radiative Forcing ◽  
Climate Model ◽  
Global Climate ◽  
Global Climate Model ◽  
Convective Precipitation ◽  
Entrainment Rate ◽  
Cloud Radiative Forcing ◽  
Precipitation Efficiency ◽  
Perturbed Physics

Abstract This study explores connections between process-level modeling of convection and global climate model (GCM) simulated clouds and cloud feedback to global warming through a set of perturbed-physics and perturbed sea surface temperature experiments. A bulk diagnostic approach is constructed, and a set of variables is derived and demonstrated to be useful in understanding the simulated relationship. In particular, a novel bulk quantity, the convective precipitation efficiency or equivalently the convective detrainment efficiency, is proposed as a simple measure of the aggregated properties of parameterized convection important to the GCM simulated clouds. As the convective precipitation efficiency increases in the perturbed-physics experiments, both liquid and ice water path decrease, with low and middle cloud fractions diminishing at a faster rate than high cloud fractions. This asymmetry results in a large sensitivity of top-of-atmosphere net cloud radiative forcing to changes in convective precipitation efficiency in this limited set of models. For global warming experiments, intermodel variations in the response of cloud condensate, low cloud fraction, and total cloud radiative forcing are well explained by model variations in response to total precipitation (or detrainment) efficiency. Despite significant variability, all of the perturbed-physics models produce a sizable increase in precipitation efficiency to warming. A substantial fraction of the increase is due to its convective component, which depends on the parameterization of cumulus mixing and convective microphysical processes. The increase in convective precipitation efficiency and associated change in convective cloud height distribution owing to warming explains the increased cloud feedback and climate sensitivity in recently developed Geophysical Fluid Dynamics Laboratory GCMs. The results imply that a cumulus scheme using fractional removal of condensate for precipitation and inverse calculation of the entrainment rate tends to produce a lower climate sensitivity than a scheme using threshold removal for precipitation and the entrainment rate formulated inversely dependent on convective depth.

scholarly journals Supplementary material to "The global aerosol-climate model ECHAM6.3-HAM2.3 – Part 2: Cloud evaluation, aerosol radiative forcing and climate sensitivity"

2019 ◽  
Author(s):  
David Neubauer ◽  
Sylvaine Ferrachat ◽  
Colombe Siegenthaler-Le Drian ◽  
Philip Stier ◽  
Daniel G. Partridge ◽  
...  
Keyword(s):  
Climate Sensitivity ◽  
Radiative Forcing ◽  
Climate Model ◽  
Aerosol Radiative Forcing ◽  
Supplementary Material ◽  
Aerosol Radiative

scholarly journals Probabilistic projections of future warming and climate sensitivity trajectories

2021 ◽  
Author(s):  
Philip Goodwin
Keyword(s):  
Global Warming ◽  
Climate Sensitivity ◽  
Climate Model ◽  
Heat Content ◽  
Surface Warming ◽  
Observational Uncertainty ◽  
Future Global Warming ◽  
Intercomparison Project ◽  
Future Warming ◽  
Probabilistic Projections

Abstract Projections of future global mean surface warming for a given forcing scenario remain uncertain, largely due to uncertainty in the climate sensitivity. The ensemble of Earth system models from the Climate Model Intercomparison Project phase 6 (CMIP6) represent the dominant tools for projecting future global warming. However, the distribution of climate sensitivities within the CMIP6 ensemble is not representative of recent independent probabilistic estimates, and the ensemble contains significant variation in simulated historic surface warming outside agreement with observational datasets. Here, a Bayesian approach is used to infer joint probabilistic projections of future surface warming and climate sensitivity for SSP scenarios. The projections use an efficient climate model ensemble filtered and weighted to encapsulate observational uncertainty in historic warming and ocean heat content anomalies. The probabilistic projection of climate sensitivity produces a best estimate of 2.9 °C, and 5th to 95th percentile range of 1.5 to 4.6 °C, in line with previous estimates using multiple lines of evidence. The joint projection of surface warming over the period 2030 to 2040 has a 50% or greater probability of exceeding 1.5 °C above preindustrial for all SSPs considered: 119, 126, 245, 370 and 585. Average warming by the period 2050 to 2060 has a greater than 50% chance of exceeding 2 °C for SSPs 245, 370 and 585. These results imply that global warming is no longer likely to remain under 1.5 °C, even with drastic and immediate mitigation, and highlight the importance of urgent action to avoid exceeding 2 °C warming.

scholarly journals The global aerosol-climate model ECHAM6.3-HAM2.3 – Part 2: Cloud evaluation, aerosol radiative forcing and climate sensitivity

2019 ◽  
Author(s):  
David Neubauer ◽  
Sylvaine Ferrachat ◽  
Colombe Siegenthaler-Le Drian ◽  
Philip Stier ◽  
Daniel G. Partridge ◽  
...  
Keyword(s):  
Climate Sensitivity ◽  
Radiative Forcing ◽  
Climate Model ◽  
Cloud Amount ◽  
Cirrus Clouds ◽  
Previous Model ◽  
Ice Crystal ◽  
Convective Clouds ◽  
Low Cloud ◽  
Aerosol Activation

Abstract. The global aerosol-climate model ECHAM6.3-HAM2.3 (E63H23) and the previous model versions ECHAM5.5-HAM2.0 (E55H20) and ECHAM6.1-HAM2.2 (E61H22) are evaluated using global observational datasets for clouds and precipitation. In E63H23 low cloud amount, liquid and ice water path and cloud radiative effects are more realistic than in previous model versions. E63H23 has a more physically based aerosol activation scheme, improvements in the cloud cover scheme, changes in detrainment of convective clouds, changes in the sticking efficiency for accretion of ice crystals by snow, consistent ice crystal shapes throughout the model, changes in mixed phase freezing and an inconsistency in ice crystal number concentration (ICNC) in cirrus clouds was removed. Biases that were identified in E63H23 (and in previous model versions) are a too low cloud amount in stratocumulus regions, deep convective clouds in the Atlantic and Pacific oceans form too close to the continents and there are indications that ICNCs are overestimated. Since clouds are important for effective radiative forcing due to aerosol-radiation and aerosol-cloud interactions (ERFari+aci) and equilibrium climate sensitivity (ECS), also differences in ERFari+aci and ECS between the model versions were analyzed. ERFari+aci is weaker in E63H23 (−1.0 W m−2) than in E61H22 (−1.2 W m−2) (or E55H20; −1.1 W m−2). This is caused by the weaker shortwave ERFari+aci (new aerosol activation scheme and sea salt emission parameterization in E63H23, more realistic simulation of cloud water) overcompensating the weaker longwave ERFari+aci (removal of an inconsistency in ICNC in cirrus clouds in E61H22). The decrease in ECS in E63H23 (2.5 K) compared to E61H22 (2.8 K) is due to changes in the entrainment rate for shallow convection (affecting the cloud amount feedback) and a stronger cloud phase feedback.

scholarly journals Radiative and climate impacts of a large volcanic eruption during stratospheric sulfur geoengineering

2016 ◽  
Vol 16 (1) ◽  
pp. 305-323 ◽  
Author(s):  
A. Laakso ◽  
H. Kokkola ◽  
A.-I. Partanen ◽  
U. Niemeier ◽  
C. Timmreck ◽  
...  
Keyword(s):  
Volcanic Eruption ◽  
Radiative Forcing ◽  
Climate Changes ◽  
Climate Model ◽  
Volcanic Eruptions ◽  
Climate Impacts ◽  
Solar Radiation Management ◽  
Atmospheric Conditions ◽  
Maximum Increase ◽  
Global Mean

Abstract. Both explosive volcanic eruptions, which emit sulfur dioxide into the stratosphere, and stratospheric geoengineering via sulfur injections can potentially cool the climate by increasing the amount of scattering particles in the atmosphere. Here we employ a global aerosol-climate model and an Earth system model to study the radiative and climate changes occurring after an erupting volcano during solar radiation management (SRM). According to our simulations the radiative impacts of the eruption and SRM are not additive and the radiative effects and climate changes occurring after the eruption depend strongly on whether SRM is continued or suspended after the eruption. In the former case, the peak burden of the additional stratospheric sulfate as well as changes in global mean precipitation are fairly similar regardless of whether the eruption takes place in a SRM or non-SRM world. However, the maximum increase in the global mean radiative forcing caused by the eruption is approximately 21 % lower compared to a case when the eruption occurs in an unperturbed atmosphere. In addition, the recovery of the stratospheric sulfur burden and radiative forcing is significantly faster after the eruption, because the eruption during the SRM leads to a smaller number and larger sulfate particles compared to the eruption in a non-SRM world. On the other hand, if SRM is suspended immediately after the eruption, the peak increase in global forcing caused by the eruption is about 32 % lower compared to a corresponding eruption into a clean background atmosphere. In this simulation, only about one-third of the global ensemble-mean cooling occurs after the eruption, compared to that occurring after an eruption under unperturbed atmospheric conditions. Furthermore, the global cooling signal is seen only for the 12 months after the eruption in the former scenario compared to over 40 months in the latter. In terms of global precipitation rate, we obtain a 36 % smaller decrease in the first year after the eruption and again a clearly faster recovery in the concurrent eruption and SRM scenario, which is suspended after the eruption. We also found that an explosive eruption could lead to significantly different regional climate responses depending on whether it takes place during geoengineering or into an unperturbed background atmosphere. Our results imply that observations from previous large eruptions, such as Mount Pinatubo in 1991, are not directly applicable when estimating the potential consequences of a volcanic eruption during stratospheric geoengineering.

scholarly journals Atmospheric lifetimes, infrared absorption spectra, radiative forcings and global warming potentials of NF<sub>3</sub> and CF<sub>3</sub>CF<sub>2</sub>Cl (CFC-115)

2016 ◽  
Vol 16 (17) ◽  
pp. 11451-11463 ◽  
Author(s):  
Anna Totterdill ◽  
Tamás Kovács ◽  
Wuhu Feng ◽  
Sandip Dhomse ◽  
Christopher J. Smith ◽  
...  
Keyword(s):  
Global Warming ◽  
Cross Sections ◽  
Infrared Absorption ◽  
Radiative Forcing ◽  
Climate Model ◽  
Intergovernmental Panel ◽  
Radiative Forcings ◽  
Radiative Efficiency ◽  
Atmospheric Window ◽  
Global Warming Potentials

Abstract. Fluorinated compounds such as NF3 and C2F5Cl (CFC-115) are characterised by very large global warming potentials (GWPs), which result from extremely long atmospheric lifetimes and strong infrared absorptions in the atmospheric window. In this study we have experimentally determined the infrared absorption cross sections of NF3 and CFC-115, calculated the radiative forcing and efficiency using two radiative transfer models and identified the effect of clouds and stratospheric adjustment. The infrared cross sections are within 10 % of previous measurements for CFC-115 but are found to be somewhat larger than previous estimates for NF3, leading to a radiative efficiency for NF3 that is 25 % larger than that quoted in the Intergovernmental Panel on Climate Change Fifth Assessment Report. A whole atmosphere chemistry–climate model was used to determine the atmospheric lifetimes of NF3 and CFC-115 to be (509 ± 21) years and (492 ± 22) years, respectively. The GWPs for NF3 are estimated to be 15 600, 19 700 and 19 700 over 20, 100 and 500 years, respectively. Similarly, the GWPs for CFC-115 are 6030, 7570 and 7480 over 20, 100 and 500 years, respectively.

Some thoughts on Sun—weather relations

1990 ◽  
Vol 330 (1615) ◽  
pp. 543-545 ◽  
Keyword(s):  
Global Warming ◽  
Solar Activity ◽  
Surface Temperature ◽  
Solar Irradiance ◽  
Radiative Forcing ◽  
Total Solar Irradiance ◽  
Greenhouse Warming

Recent measurements of variations in the total solar irradiance now offer a quantitative mechanism through which year-to-year changes in solar activity may influence surface temperature. It follows that at least a part of the global warming of the last century could be ascribed to changes in solar output, and that effects of solar radiative forcing may need to be taken into account in predictions of greenhouse warming. A number of questions still remain, however, before this thesis rests on a firm foundation.

Sign in / Sign up

Export Citation Format

Share Document