scholarly journals Evaluation of Facial Proportions and Their Association with Thumbprint Patterns among Hausa Ethnic Group

2017 ◽  
Vol 2017 ◽  
pp. 1-11 ◽  
Author(s):  
Lawan Hassan Adamu ◽  
Samuel Adeniyi Ojo ◽  
Barnabas Danborno ◽  
Sunday Samuel Adebisi ◽  
Magaji Garba Taura
Keyword(s):  
Facial Features ◽  
Class Iii ◽  
Exact Test ◽  
Evolutionary Forces ◽  
Fingerprint Pattern ◽  
Direct Sensing ◽  
Facial Proportions ◽  
Left And Right ◽  
Males And Females ◽  
The Right

Background. Evolutionary forces such as founder effect resulted in reproductive isolation and reduced genetic diversity may have led to ethnic variation in the facial appearance and other features like fingerprints pattern. Aim. To determine the pattern of facial proportion based on neoclassical facial canon. The associations between facial proportions and thumbprint patterns were also investigated. Subject and Methods. A total of 534 subjects of 18–25 years of age participated. Direct sensing and photographs methods were used to determine fingerprint and facial features, respectively. Fisher’s Exact test was used to test for association between variables. Results. It was observed that in both males and females there was no (0%) occurrence of classical canon of facial proportion. There was also no association between sex and facial proportions. A significant association was found in between thumbprint patterns and vertical class III neoclassical facial proportion only when the frequency of both left and right thumbprint patterns was considered a single entity. There is no significant association between the thumbprint patterns of the right and left thumbs with vertical horizontal facial proportions in male and female participants. It was observed that right and left thumbs have more tendency of significance with facial proportion in males and females, respectively. Conclusion. Fingerprint pattern and its associated features may be controlled by a different mechanism such that the two may correlate differently with other features as the case may be with facial features.

scholarly journals Evaluation of Articular Eminence Inclination in Normo-Divergent Subjects with Different Skeletal Classes through CBCT

2021 ◽  
Vol 18 (11) ◽  
pp. 5992
Author(s):  
Francesco Moscagiuri ◽  
Francesco Caroccia ◽  
Chiara Lopes ◽  
Beatrice Di Carlo ◽  
Erica Di Maria ◽  
...  
Keyword(s):  
Cross Sectional Study ◽  
Cone Beam ◽  
Class Iii ◽  
Articular Eminence ◽  
Cross Sectional ◽  
Future Studies ◽  
Skeletal Class ◽  
Significant Difference ◽  
Left And Right ◽  
The Right

(1) We aimed to compare articular eminence inclination (AEI) in normo-divergent subjects (SN^GoGn = 32° ± 5°), with different anteroposterior sagittal skeletal classes through a cone beam computed generated tomography (CBCT). (2) In this cross-sectional study, CBCT records were retrospectively analysed. From the original sample of 52 CBCT records, 33 records of normo-divergent adult subjects were selected (11 Class I, 13 Class II and 9 Class III). On mid-sagittal section of the Temporomandibular Joint (TMJ) on both sides, AEI was calculated by graphic method. (3) The Kruskal–Wallis test was used to evaluate any difference between AEI on both left and right sides in the three groups. No statistically significant difference was observed on either the right side (p = 0.174) or the left side (p = 0.624). (4) Articular eminence inclination seems to be not related with skeletal class. Given the lack of significance in the observed differences between AEI and skeletal classes, we believe that future studies should focus on assessing possible relationships between AEI and different vertical skeletal patterns.

scholarly journals Radiographic analysis of the sacral-2-alar screw trajectory

2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Yulin Zhao ◽  
Baisheng Yuan ◽  
Yijun Han ◽  
Binglei Zhang
Keyword(s):  
Average Length ◽  
Spinous Process ◽  
Northern China ◽  
Entry Point ◽  
Minimum Diameter ◽  
Normal Spine ◽  
Left And Right ◽  
Males And Females ◽  
Ct Data ◽  
The Right

Abstract Purpose To explore the feasibility of sacral-2-alar (S2-alar) screw placement by measuring the length, diameter, and angle of the screw trajectory on computed tomography (CT). Methods This study selected 100 Han-nationality adults in northern China with a normal spine and pelvis. CT data were imported into PHILIPS software for reconstructing the 3D digital images. The optimal S2-alar screw trajectory was imitated on CT. Parameters including the length of the screw trajectory, sagittal angle, coronal angle, distance between the entry point and the spinous process, and minimum diameter of the screw trajectory were measured to evaluate the application of S2-alar screws. Results In total, 48 males and 52 females were included. The average length of the left screw trajectory was 47.18 ± 3.91 mm. The sagittal angle was 29.06 ± 4.00°. The coronal angle was 13.31 ± 6.95°. The distance between the entry point and the spinous process was 21.0 (3.7) mm. The minimum diameter of the screw trajectory was 17.1 (2.3) mm. The average length of the right screw trajectory was 45.46 ± 4.37 mm. The sagittal angle was 23.33 ± 4.26°. The coronal angle was 14.88 ± 6.84°. The distance between the entry point and the spinous process was 22.8 (2.9) mm. The minimum diameter of the screw trajectory was 16.9 (3.1) mm. In women, the average length of the left screw trajectory was 44.80 ± 3.66 mm. The sagittal angle was 32.14 ± 5.48°. The coronal angle was 16.04 ± 7.74°. The distance between the entry point and the spinous process was 21.8 (2.8) mm. The minimum diameter of the screw trajectory was 17.1 (5) mm. The average length of the right screw trajectory was 44.01 ± 3.72 mm. The sagittal angle was 25.12 ± 5.19. The coronal angle was 16.67 ± 8.34°. The distance between the entry point and the spinous process was 21.6 (2.7) mm. The minimum diameter of the screw trajectory was 17 (4.5) mm. As seen from the data, there were significant differences in the minimum diameter of the screw trajectory in both males and females. In females, there were also significant differences between the left and right sides in the coronal angle. Between males and females, there were statistically significant differences in the length of the screw trajectory. There were no statistically significant differences in the other parameters between males and females. Conclusion The optimal screw trajectory of the S2-alar screw can be found on CT. The length and deflection angle of the screw meet the clinical requirements. This method is easy to perform and feasible for clinical application.

Separable Mechanisms in Face Processing: Evidence from Hemispheric Specialization

1991 ◽  
Vol 3 (1) ◽  
pp. 42-58 ◽  
Author(s):  
Lynn A. Hillger ◽  
Olivier Koenig
Keyword(s):  
Left Hemisphere ◽  
Face Processing ◽  
Visual Processing ◽  
Right Hemisphere ◽  
Hemispheric Specialization ◽  
Facial Feature ◽  
General Purpose ◽  
Facial Features ◽  
Left And Right ◽  
The Right

This article addresses three issues in face processing: First, is face processing primarily accomplished by the right hemisphere, or do both left- and right-hemisphere mechanisms play important roles? Second, are the mechanisms the same as those involved in general visual processing, or are they dedicated to face processing? Third, how can the mechanisms be characterized more precisely in terms of processes such as visual parsing? We explored these issues using the divided visual field methodology in four experiments. Experiments 1 and 2 provided evidence that both left- and right-hemisphere mechanisms are involved in face processing. In Experiment 1, a right-hemisphere advantage was found for both Same and Different trials when Same faces were identical and Different faces differed on all three internal facial features. Experiment 2 replicated the right-hemisphere advantage for Same trials but showed a left-hemisphere advantage for Different trials when one of three facial features differed between the target and the probe faces. Experiment 3 showed that the right-hemisphere advantage obtained with upright faces in Experiment 2 disappeared when the faces were inverted. This result suggests that there are right-hemisphere mechanisms specialized for processing upright faces, although it could not be determined whether these mechanisms are completely face-specific. Experiment 3 also provided evidence that the left-hemisphere mechanisms utilized in face processing tasks are general-purpose visual mechanisms not restricted to particular classes of visual stimuli. In Experiment 4, a left-hemisphere advantage was obtained when the task was to find one facial feature that was the same between the target and the probe faces. We suggest that left-hemisphere advantages shown in face processing are due to the parsing and analysis of the local elements of a face.

Studies on the sex-ratio and related phenomena. (7) The foetal sex-ratio in the pig

1925 ◽  
Vol 15 (3) ◽  
pp. 284-299 ◽  
Author(s):  
A. S. Parkes
Keyword(s):  
Sex Ratio ◽  
Sex Determination ◽  
Inverse Correlation ◽  
Differential Mortality ◽  
Average Weight ◽  
Significant Difference ◽  
Approximate Equality ◽  
Left And Right ◽  
Males And Females ◽  
The Right

1. Of 583 pig foetuses of all ages, 331 were found to be males and 252 females, giving a male percentage of 56·8, which is much higher than the approximate equality between the sexes that seems to exist at birth. This result confirms Jewell, who found a male percentage of 55 among 1000 cow foetuses.2. These 583 pig foetuses when classified by weight (0–100 gm., 101–300 gm., 301+gm.) gave the following percentages of males for the respective groups, 59·1, 57·0, 53·2. In other words, the percentage of males decreases as gestation proceeds, a result which can only be brought about by a differential mortality of males and females. It would appear that the percentage at conception must be very near 60 per cent. or 150 males per 100 females.3. The sex-ratios of foetuses from the left and right cornua show no significant difference, 55·0 for the right and 54·7 for the left.4. The males were found to average about 7 per cent. heavier than the females.5. There seems to be an inverse correlation between the number of foetuses in a horn and their average weight. Foetuses from the left cornu have a slightly greater weight than those from the right, and this may be connected with the slightly inferior fertility of this horn.6. The excess of males at conception is discussed in the light of the implications of the chromosome mechanism of sex determination, and reference is made to the greater mortality of the males.

Perimeter of The Tricuspid Valve: A Cadaveric Human Heart Study

2020 ◽  
Vol 11 (3) ◽  
pp. 3424-3428
Author(s):  
Kirti Chaudhary ◽  
Amey Dhatrak ◽  
Brij Raj Singh ◽  
Ujwal Gajbe
Keyword(s):  
Tricuspid Valve ◽  
Tricuspid Regurgitation ◽  
Right Ventricular Dysfunction ◽  
Mean Value ◽  
Female Population ◽  
Functional Tricuspid Regurgitation ◽  
Lv Dysfunction ◽  
Heart Study ◽  
Males And Females ◽  
The Right

Historically, the research on the right ventricle (RV) has been neglected by his left equivalent because of the complexity of left ventricle (LV) dysfunction. Tricuspid regurgitation (TR) can be classified as linked to primary valve disease or functional in nature, but most are functional. Although it was historically assumed that such functional Tricuspid regurgitation, i.e. arising from leftsided disease, and it can be resolved after corrective surgery, but after successful surgery, on the aortic or mitral valve annular dilatation, the Tricuspid regurgitation and right ventricular dysfunction may persist.To study the circumference of tricuspid orifice and it’s the diameter in two perpendicular planes and its comparison among the male and female population. The material for the present study comprised of 50 formalin fixed human hearts (35 males and 15 females) which were obtained from the department of anatomy. In this study, it is observed that: The mean value of circumference of a tricuspid orifice is 11.01+/-0.63 cm. The diameter of tricuspid orifice along the frontal dimension is 3.06+/-0.38 cm, and the diameter along the sagittal dimension is 2.26+/-0.23 cm. The measurements of the circumference of tricuspid orifice reported for males and females in western countries were higher than the present study and the diameter along the frontal dimension is greater than the diameter along the sagittal dimension. The tricuspid valve diameter along the frontal dimension was more than the diameter along the sagittal dimension in both males and females.

Comparison of the efficiency of the indexes of Pont and Korkhause with Kernott technique in patients with narrowing of maxilla

2020 ◽  
Vol 20 (3) ◽  
pp. 199-203
Author(s):  
O. I. Admakin ◽  
I. A. Solop ◽  
A. D. Oksentyuk
Keyword(s):  
Dental Treatment ◽  
Standard Analysis ◽  
Clinical Hospital ◽  
Control Models ◽  
Diagnostic Models ◽  
Left And Right ◽  
The Asymmetry ◽  
The Right ◽  
The University ◽  
Medical University

Relevance. The narrowing of the maxilla is one of the most common pathologies in orthodontics. Recent studies show that the narrowing is always asymmetric which is connected to the rotation of the maxilla. To choose the treatment correctly one need a calculation that reveals the asymmetry, which is impossible with using standard indexes.Purpose – to compare efficiency of indexes of Pont and Korkhause with the Kernott's method in patients with narrowing of the maxilla.Materials and methods. The study involved 35 children aged from 8 to 12 years old undergoing dental treatment in the University Children's Clinical Hospital of the First Moscow State Medical University with no comorbidities. For every patient a gypsum model was prepared and after that to carry out the biometrical calculation. In this study two indexes were used: Pont's index and Korkhause's; using this standard analysis the narrowing of the maxilla was revealed. After using Pont's Index and Korkhaus analysis all the models were calculated by the method of Kernott with Kernott's dynamic pentagon.Results. As a result of the analysis of the control diagnostic models a narrowing of the maxilla in 69% of cases (n = 24) was revealed in all cases, the deviation of the size of the dentition was asymmetric. Thus, 65% of the surveyed models showed a narrowing on the right. This narrowing was of a different severity and averaged 15 control models.Conclusions. This shows that for the biometrics of diagnostic models it is necessary to use methods that allow to estimate the width of the dentition rows on the left and on the right separately. To correct the asymmetric narrowing of the dentition, it is preferable to use non-classical expanding devices that act equally on the left and right sides separetly.

scholarly journals Sexual dimorphism in the long-term stability (10 years) of skeletal Class III treatment

2021 ◽  
Vol 22 (1) ◽  
Author(s):  
Natalia Tejedor ◽  
Conchita Martín ◽  
José Antonio Alarcón ◽  
María Dolores Oteo-Calatayud ◽  
Juan Carlos Palma-Fernández
Keyword(s):  
Sexual Dimorphism ◽  
Class Iii ◽  
Class Iii Malocclusion ◽  
Skeletal Class ◽  
Term Stability ◽  
Long Term Stability ◽  
Fixed Appliances ◽  
Males And Females ◽  
Class Iii Treatment

Abstract Background Class III malocclusion is associated with high sexual dimorphism, especially in individuals older than 13 years of age, with significant differences in growth between males and females during the pubertal and postpubertal stages, and in adulthood. The aim of this research was to examine differences between males and females in long-term stability (10 years) of treatment for skeletal Class III malocclusion. Methods Thirty patients (15 males and 15 females) with skeletal Class III malocclusion, who had been treated with rapid maxillary expansion (RME) combined with face mask protraction followed by fixed appliances, were selected sequentially. Thirty patients (15 males and 15 females) with skeletal Class I and mesofacial patterns treated only with fixed appliances for dental problems served as the control group. Differences between groups and sexes were evaluated using lateral cephalograms taken at the start of treatment (T0), immediately after the end of treatment (T1), and after 10 years (T2). The long-term treatment success rate was calculated. Results Ten years after Class III treatment, overjet and overbite relapse occurred similarly in females (− 0.68 ± 0.7 mm; − 0.38 ± 0.75 mm, respectively) and males (− 1.09 ± 1.47 mm; − 0.64 ± 0.9 mm, respectively); the ANB angle and Wits appraisal became significantly more negative in males (− 1.37 ± 1.06°; − 2.7 ± 2.53 mm) than in females (− 0.18 ± 1.26°; − 0.46 ± 1.94 mm). The success rate was 73.3% in males and 80% in females. Conclusions Significant differences in the long-term stability of Class III treatment outcomes have been found between males and females, with a larger skeletal Class III relapse and lower long-term success rates in males.

scholarly journals The Short-Term Effect of Active Skeletonized Sutural Distractor Appliance on Temporomandibular Joint Morphology of Class III Malocclusion Subjects

2021 ◽  
Author(s):  
Mohamed Zahoor Ul Huqh ◽  
Rozita Hassan ◽  
Roselinda Abdul Rahman ◽  
Asilah Yusof ◽  
Ida Bagus Narmada ◽  
...  
Keyword(s):  
Temporomandibular Joint ◽  
Term Effect ◽  
Class Iii ◽  
Class Iii Malocclusion ◽  
Short Term ◽  
Short Term Effect ◽  
Condylar Position ◽  
Joint Morphology ◽  
The Right ◽  
Condylar Volume

Abstract Objectives The purpose of this study was to evaluate the short-term effect of active skeletonized sutural distractor (ASSD) appliance on temporomandibular joint morphology of class III malocclusion subjects. Materials and Methods This was a prospective interventional study. Cone-beam computerized tomography (CBCT) images of 22 patients were taken before and after treatment by using Planmeca Promax 3D CBCT machine version 2.9.2 (Planmeca OY Helsinki, Finland). The condylar width, height, length, roof of glenoid fossa thickness, and all joint spaces were measured. The condylar position was determined based on Pullinger and Hollander formula. The condylar shape was determined as per Kinzinger et al. The condylar volume was calculated by using Mimics software (Materialize, Belgium). Statistical Analysis Data analysis was performed by using SPSS software version 24. Wilcoxon paired signed-rank test was used to compare the difference in temporomandibular joint morphology and condylar volume between pre- and post-treatment measurements. Chi-square test was used to compare the condylar position and shape. Results The superior (p = 0.000 on the right side, p = 0.005 on the left side) and posterior joint spaces (p = 0.000 on both sides) were decreased after the treatment, respectively. The condyles were rotated upward and backward, thereby increasing the anterior joint spaces (p = 0.000 on both sides) after the treatment. The condylar volume increases after treatment, but no significant differences were observed (p = 0.903 on the right side, p = 0.062 on the left side). Conclusion The significant changes were observed in joint spaces. The condyles were more anteriorly placed before treatment. Condylar position and shape alter in response to ASSD treatment. The condylar volume did not show any significant change.

scholarly journals Transcriptomic uniqueness and commonality of the ion channels and transporters in the four heart chambers

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Sanda Iacobas ◽  
Bogdan Amuzescu ◽  
Dumitru A. Iacobas
Keyword(s):  
Ion Channels ◽  
Cycle Phase ◽  
Functional Roles ◽  
Expression Control ◽  
Gene Expression Control ◽  
Left And Right ◽  
The Right ◽  
Phase Out ◽  
Right Atria ◽  
Agilent Microarrays

AbstractMyocardium transcriptomes of left and right atria and ventricles from four adult male C57Bl/6j mice were profiled with Agilent microarrays to identify the differences responsible for the distinct functional roles of the four heart chambers. Female mice were not investigated owing to their transcriptome dependence on the estrous cycle phase. Out of the quantified 16,886 unigenes, 15.76% on the left side and 16.5% on the right side exhibited differential expression between the atrium and the ventricle, while 5.8% of genes were differently expressed between the two atria and only 1.2% between the two ventricles. The study revealed also chamber differences in gene expression control and coordination. We analyzed ion channels and transporters, and genes within the cardiac muscle contraction, oxidative phosphorylation, glycolysis/gluconeogenesis, calcium and adrenergic signaling pathways. Interestingly, while expression of Ank2 oscillates in phase with all 27 quantified binding partners in the left ventricle, the percentage of in-phase oscillating partners of Ank2 is 15% and 37% in the left and right atria and 74% in the right ventricle. The analysis indicated high interventricular synchrony of the ion channels expressions and the substantially lower synchrony between the two atria and between the atrium and the ventricle from the same side.

Sign in / Sign up

Export Citation Format

Share Document