Investigating the effect of bruxism on maxillary arch length and width in children using three-dimensional digital model analysis

Background Bruxism is defined as repetitive jaw-muscle activity characterized by the grinding and clenching of teeth. The prevalence of bruxism in children is extensive, and it can cause irregularities in dental arches. The study aimed to investigate the presence of any effects of bruxism on maxillary arch length and width in children using three-dimensional (3D) digital model analysis. Method This study evaluated 30 children with bruxism. For every child with bruxism, a case control without bruxism was selected and matched for gender, age, and dentition. Digital models of the patients’ maxilla were obtained with a 3D intraoral scanner, and width and length measurements between the reference points on the maxilla were obtained on the digital models. Results The mean age of the study group was 9.13 ± 1.27. Insıgnificance differences were found between females and males within and between groups in terms of maxillary width and length. Insignificant difference was found between the control and study groups when the lengths of 3R-3L, 4R-4L, 5R-5L, 6R-6L, and IP-M were compared (p > 0.05). Conclusion Based on the study results, there were no differences in the maxillary arch length and width in patients with bruxism and patients without bruxism.

Parathyroid hormone promotes maxillary expansion and reduces relapse in the repeated activation maxillary expansion rat model by regulating Wnt/β-catenin pathway

Background Constricted maxillary bone is a common skeletal deformity, which may lead to crowding and posterior crossbite. Mid-palatal suture expansion is often used to increase the maxillary width, but its skeletal effects are limited and tend to relapse, even with prolonged retention. We hypothesized that parathyroid hormone (PTH) may reduce the relapse of maxillary expansion. Methods We established a novel rat maxillary expansion model using palatal tubes with an insertable “W”-shaped spring which can be repeatedly activated. A total of 32 male healthy Wistar rats were randomly divided into six groups: the control group, the PTH group, the expansion group, the expansion + PTH group, the expansion + relapse group and the expansion + PTH + relapse group. All animals in the first 4 groups were killed after 10 days and the 2 relapse groups were killed after 15 days. The maxillary arch widths and histological staining were used to assess the expansion and relapse effects. The immunohistochemical staining, micro-CT, RT-qPCR and Western blot were used to evaluate the bone remodeling during expansion. Results The suture width was increased by the expansion device, and the repeated activation maxillary expansion rat model showed better expansion effects than the conventional model. PTH significantly promoted the expansion width and reduced the relapse ratio. Meanwhile, in the expansion + PTH group, histological and immunohistochemical staining showed that osteoblasts, osteoclasts, new cartilage and osteoid were significantly increased, micro-CT showed increased bone mass, and PCR and Western blot results confirmed up-regulation of RANKL, β-catenin, type II collagen and OCN. Conclusion The novel repeated activation maxillary expansion rat model has better effects than the conventional model. PTH enhances the maxillary expansion and reduces its relapse by regulating Wnt/β-catenin and RANKL pathways. PTH administration may serve as an adjunctive therapy in addition to mechanical expansion for treatment of maxillary constriction.

Validating clinical characteristic of primary failure of eruption (PFE) associated with PTH1R variants

Background Primary failure of eruption (PFE) is a hereditary condition, and linkage with variants in the PTH1R gene has been demonstrated in many cases. The clinical severity and expression of PFE is variable, and the genotype–phenotype correlation remains elusive. Further, the similarity between some eruption disorders that are not associated with PTH1R alterations is striking. To better understand the genotype–phenotype correlation, we examined the relationship between the eruption phenotype and PTH1R genotype in 44 patients with suspected PFE and 27 unaffected relatives. Sanger sequencing was employed to analyze carefully selected PFE patients. Potential pathogenicity of variants was evaluated against multiple genetic databases for function prediction and frequency information. Results Mutational analysis of the PTH1R coding sequence revealed 14 different variants in 38 individuals (30 patients and 8 first-degree relatives), 9 exonic and 5 intronic. Their pathogenicity has been reported and compared with the number and severity of clinical signs. In 72.7% of patients with pathogenic variants, five clinical and radiographic criteria have been found: involvement of posterior teeth, involvement of the distal teeth to the most mesial affected, supracrestal presentation, altered vertical growth of the alveolar process and posterior open-bite. In cases with mixed dentition (3), the deciduous molars of the affected quadrant were infraoccluded. Discussion The probability of an affected patient having a PTH1R variant is greater when five specific clinical characteristics are present. The likelihood of an eruption defect in the absence of specific clinical characteristics is rarely associated with a PTH1R mutation. Conclusions We report here that systematic clinical and radiographic observation using a diagnostic rubric is highly valuable in confirming PFE and offers a reliable alternative for accurate diagnosis.

The effect of two different types of forces on possible root resorption in relation to dentin phosphoprotein levels: a single-blind, split-mouth, randomized controlled trial

Background The purpose of this 2-arm-parallel split-mouth trial was to evaluate and compare the extent of possible root resorption using dentin phosphoprotein levels in gingival crevicular fluid between controlled continuous and intermittent orthodontic force groups. Materials and methods A sample of 16 maxillary first premolars from 8 patients requiring bilateral extractions of the upper first premolars as part of their orthodontic treatment were recruited. A buccally directed continuous force of 150 g, reactivated after 28 days, was applied to the upper first premolar on one side for 8 weeks. On the contralateral first premolar, a buccally directed intermittent force (21 days on, 7 days off) of the same magnitude was applied for the same period. Gingival crevicular fluid samples were collected at the beginning of the study, 1st, 3rd, 4th and 5th week, and at the end of the study to quantify and compare dentin phosphoprotein levels in both groups. Results Dentin phosphoprotein levels showed a higher concentration in the continuous force group than the intermittent force group in week 4 and 8 of sample collection; where the differences were statistically significant (95% CI 0.007–0.14; P < .04) and (95% CI 0.02–0.17; P < .04) respectively. No harm was observed. Conclusions Dentin phosphoprotein was found to be a useful early biomarker to detect and monitor root resorption, showing that the application of an intermittent orthodontic force caused less root resorption than a continuous force. Trial registration NCT04825665 ClinicalTrials.gov. Registered 1 April 2021—Retrospectively registered, https://clinicaltrials.gov/ct2/show/NCT04825665.

Global survey to assess preferences when attending virtual orthodontic learning sessions: optimising uptake from virtual lectures

Objectives Understanding the issues concerning the conducting of virtual orthodontic learning sessions (VOLSs) is essential. This study aims to identify attendees- and host-related aspects that could optimise learning and uptake from the VOLSs. Methodology Fourteen pre-validated questions were anonymously and electronically sent to 3000 orthodontic residents and specialists globally. The survey included demographic questions and questions to gauge attendees' engagement, memorising, and motivation-related factors. Reminders were sent at two-week intervals to non-respondents. The survey was closed when the sample size was met. Descriptive and inferential statistics were performed. Results 593 orthodontic residents and specialists (294 males and 299 females), primarily junior orthodontists and residents aged between 25 and 35 years of age, completed the survey. Post-VOLS recording was highly requested by the participants (8.84/10, 95% CI 8.67–9.00) with no significant influence of demographics on this trend (p > 0.05). Most of the participants were in favour of short post-VOLSs feedback (6.79/10 95% CI 6.58–6.99) with significant differences (p = 0.048) between participants from different regions of the world. The average number of screenshots taken was 6.1 per lecture. The learners’ interests in attending on-line lectures were mainly to learn new clinical orthodontic tips (96.8%). Conclusion Implementing a short feedback survey after VOLSs, the provision of recording, and the provision of certificates of attendance need to be considered.

Clinical effects with customized brackets and CAD/CAM technology: a prospective controlled study

Objective Nowadays, CAD/CAM technologies enrich orthodontics in several ways. While they are commonly used for diagnoses and treatment planning, they can also be applied to create individualized bracket systems. The purpose of this prospective quasi-randomized study was to evaluate the clinical efficiency of a customized bracket system and its comparison with directly bonded conventional self-ligating bracket treatment. Materials and methods Altogether 38 patients were separated into two groups, treated either with direct bonded self-ligating brackets (Damon, Ormco, USA) or with indirect bonded customized CAD/CAM brackets (Insignia™, Ormco, USA). Overall treatment time, number of treatment appointments, number of lost or repositioned brackets, number of arch wires and wire bends, Little Irregularity Index, cephalometric analyses and ABO scores were compared. Superimpositions of the virtual set-ups and the treatment results of the CAD/CAM group were performed to evaluate the clinical realization of the treatment planning. Results No differences between both treatment groups were found concerning overall treatment time, number of appointments and number of archwire bends. Bonding failures occurred more often using the CAD/CAM system. Indirectly bonded brackets did not have to be repositioned as often as directly bonded brackets. Treatment results with both systems were similar concerning their effects on the reduction of ABO scores. The number of used archwires was higher in the CAD/CAM group. Treatment with both systems led to further proclination of the incisors. Proclination in the lower jaw was greater than proclination in the upper jaw, and there was a statistically significant difference between the two treatment systems. Comparing the treatment results with the virtual set-ups, mesial positions were met best, followed by vertical positions. Transversal positions showed the greatest discrepancies. Concerning angles, values of angulation showed greatest accordance to the virtual set-up, while values of inclinations showed greatest discrepancies. Conclusion In comparison with a direct bonded self-ligating bracket system the use of indirect bonded customized CAD/CAM brackets showed only minor influence on treatment efficiency and treatment outcomes. Transversal expansion, deep bite correction, expression of torque and anchorage loss remain challenges in the treatment with straight-wire appliances. Trial registration DRKS, DRKS00024350. Registered 15 February 2021, https://www.drks.de/drks_web/navigate.do?navigationId=trial.HTML&TRIAL_ID=DRKS00024350.

Impact of the prefabricated forms of NiTi archwires on orthodontic forces delivered to the mandibular dental arch

Background Although preformed archwires with a variety of arch forms are currently commercially available, the effects of variation in the shape of these archwires on the orthodontic force at each tooth are not well understood. Therefore, we evaluated the forces delivered by various types of commercially available preformed nickel–titanium alloy (NiTi) archwires in a simulated mandibular dental arch. Methods Sixty-three types of 0.019 × 0.025-inch preformed NiTi archwires from 15 manufactures were selected for analysis. The intercanine width (ICW) and intermolar width (IMW) of each archwire were measured at the mean canine and first molar depths of 30 untreated subjects with normal occlusions. Each archwire was placed in a multi-sensor measurement system simulating the mandibular dental arch of subjects with normal occlusions, and orthodontic forces in the facial-lingual direction at the central incisors, canines, and first molars were measured. Correlations between the ICW, IMW, and ICW/IMW ratio of archwires and the delivered forces were analyzed. The archwires were classified into the following four groups according to the ICW and IMW: Control group, ICW and IMW are within the means ± standard deviations of the normal ranges; Ovoid group, narrow ICW and IMW; Tapered group, narrow ICW; and Square group, narrow IMW. The forces were compared among these groups for each tooth. Results Significant correlations between the measured archwire width and force to each tooth were found, except between IMW and forces at the central incisors and canines. Significant differences in the forces were found among all groups, except between the Ovoid and Tapered groups at all teeth and between the Ovoid/Tapered and Control groups at the first molar. Significantly greater orthodontic forces in the facial direction were delivered at the central incisors by the archwires in the Ovoid and Tapered groups when compared with the archwires in the other groups. Conclusion These findings suggest that there is a possible risk of a clinically significant level of unfavorable orthodontic force being delivered to the mandibular incisors in labial inclination when using a preformed archwire with an ICW that is narrower than the dental arch.

Optimal sites for orthodontic anchor screw placement using panoramic images: risk of maxillary sinus perforation and contact with adjacent tooth roots during screw placement

Objectives This study investigated the safety of orthodontic anchor screw (OAS) placement by examining the morphology and degree of depression of the maxillary sinus adjacent to the alveolar bone between the maxillary molars. Methods We reviewed panoramic and CT imaging data of 25 patients. First, the morphology of the maxillary sinus adjacent to the alveolar bone between the maxillary molars on panoramic images was classified into three types: non-depressed sinus, funnel-like sinus depression, and sawtooth-like sinus depression. Then, the distance from the maxillary buccal bone to the maxillary sinus or to the maxillary lingual bone and the distance between the roots of the maxillary second premolar and first molar at heights of 5, 6.5, and 8 mm from the alveolar crest were measured on CT images and compared between the three sinus morphology groups. Results The sawtooth-like depression group had significantly smaller bone thickness than the other two groups, with mean thickness of < 4 mm at any height from the alveolar crest. The funnel-like depression and non-depression groups had mean bone thickness of > 8 mm at any height from the alveolar crest. Conclusions Sawtooth-like sinus depression had increased risk of maxillary sinus perforation, suggesting that OAS placement in this region should be avoided. In contrast, OAS placement between 6.5 and 8 mm from the alveolar crest is advisable in patients with funnel-like sinus depression and at a site > 8 mm from the alveolar crest in those with a non-depressed sinus.

Are orthodontic randomised controlled trials justified with a citation of an appropriate systematic review?

Background A systematic review of the evidence should be undertaken to support the justification for undertaking a clinical trial. The aim of this study was to examine whether reports of orthodontic Randomised Clinical Trials (RCTs) cite prior systematic reviews (SR) to explain the rationale or justification of the trial. Study characteristics that predicated the citation of SR in the RCT report were also explored. Material and methods Orthodontic RCTs published between 1st January 2010 to 31st December 2020 in seven orthodontic journals were identified. All titles and abstracts were screened independently by two authors. Descriptive statistics and associations were assessed for the study characteristics. Logistic regression was used to identify predicators of SR inclusion in the trial report. Results 301 RCTs fulfilling the eligibility criteria were assessed. 220 SRs were available of which 74.5% (N = 164) were cited, and 24.5% (N = 56) were not included but were available in the literature within 12 months of trial commencement. When a SR was not included in the introduction or no SR was available within 12 months of trial commencement, interventional studies were commonly cited. The continent of the corresponding author predicated the possibility of inclusion of a SR in the introduction (OR 0.36; 95% CI 0.18–0.71; p = 0.003). Conclusions A quarter of orthodontic RCTs (24.5%) included in this study did not cite a SR in the introduction section to justify the rationale of the trial when a relevant SR was available. To reduce research waste and optimal usage of resources, researchers should identify or conduct a systematic review of the evidence to support the rationale and justification of the trial.

Dentoskeletal effects of early class III treatment protocol based on timing of intervention in children

Background To detect the optimal timing of intervention based on different cervical vertebral maturation stage (CS1-2 vs. CS3-4) for the treatment of Class III malocclusion with early Class III protocol. Methods A total sample of 43 patients (23 females, 20 males) ranging between 7 and 13 years of age with dentoskeletal Class III malocclusion treated with the modified SEC III (Splints, Elastic and Chincup) protocol divided into two groups based on the cervical vertebral maturation stages (CS1-2 and CS3-4) was included in this retrospective observational longitudinal study. Patient compliance was assessed using a 2-point Likert scale. Statistical comparisons between the two groups were performed with independent sample t tests. Results No statistically significant differences for any of the cephalometric variables describing the baseline dentoskeletal features were found between the two groups except for the mandibular unit length that was significantly greater in the pubertal group (P = 0.005). The modified SEC III protocol produced favorable sagittal outcomes in both groups, whereas no statistically significant T1-T2 changes were found between the CS1-2 and CS3-4 groups for any of the angular and linear measurements. No significant differences were found in the prevalence rates of the degree of collaboration between the two groups (P = 1.000). Conclusions No significant differences between prepubertal and pubertal patients were found in the sagittal and vertical dentoskeletal changes with the modified SEC III protocol. Thus, this early Class III treatment produced similar favorable effects in growing subjects regardless of the cervical vertebral maturation stages from CS1 to CS4.