scholarly journals Estimates of Combining Ability and Heterosis for Yield and Its Related Traits in Pearl Millet Inbred Lines under Downy Mildew Prevalent Areas of Senegal

2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Ghislain Kanfany ◽  
Amadou Fofana ◽  
Pangirayi Tongoona ◽  
Agyemang Danquah ◽  
Samuel Offei ◽  
...  
Keyword(s):  
Grain Yield ◽  
Flowering Time ◽  
Downy Mildew ◽  
Plant Height ◽  
Pearl Millet ◽  
Smallholder Farmers ◽  
Central Africa ◽  
Inbred Lines ◽  
Gene Effects ◽  
Additive Gene

Pearl millet is an important cereal crop for smallholder farmers’ food security in West and Central Africa. However, its production has stagnated due to several factors such as the continuous use of local populations. A set of 17 inbred lines was crossed with Sosat C 88 and Souna 3 following a line × tester mating design. The F1 hybrids, their parents, and a check were evaluated in Bambey and Nioro research stations during the rainy season of 2017. Data on downy mildew incidence, plant height, flowering time, panicle length and diameter, productive tillers, thousand-grain weight, panicle, and grain yield were recorded. GCA and SCA mean squares were significant for most of the traits indicating that both additive and nonadditive gene effects were involved in the control of the inheritance of these traits. However, the contribution of GCA to total mean squares was higher than that of SCA for all the traits, providing that additive gene action was more important in their inheritance. The top-cross hybrid IBL155-2-1 × Sosat C 88 exhibited negative and significant SCA effects for downy mildew incidence, flowering time, and plant height. Lines IBL003-B-1, IBL091-1-1, IBL095-4-1, IBL110-B-1, and IBL 206-1-1 had positive GCA effects for grain yield and negative GCA effects for downy mildew, flowering time, and plant height. These lines can be used as parents to create synthetic varieties or hybrids.

Identification of new sources of resistance for pearl millet downy mildew disease under field conditions

2018 ◽  
Vol 16 (4) ◽  
pp. 397-400 ◽  
Author(s):  
Ghislain Kanfany ◽  
Amadou Fofana ◽  
Pangirayi Tongoona ◽  
Agyemang Danquah ◽  
Samuel Offei ◽  
...  
Keyword(s):  
Downy Mildew ◽  
Plant Height ◽  
Pearl Millet ◽  
Agronomic Traits ◽  
Smallholder Farmers ◽  
Inbred Lines ◽  
Field Conditions ◽  
Sources Of Resistance ◽  
Resistant Lines ◽  
Moderately Resistant

AbstractPearl millet is an important cereal crop for smallholder farmers’ food security in Africa and India. However, its production has stagnated due to several factors such as downy mildew (DM). Thus, a study was conducted to identify new sources of resistance from pearl millet inbred lines derived from a collection of landraces originated from West and Central African countries. A set of 101 lines, including 99 inbred lines from West and Central Africa along with a 7042S and SOSAT C 88 as susceptible and resistant checks, respectively, were evaluated under field conditions with infector rows in Bambey and Nioro research stations during the rainy season of 2016. Data on DM incidence and severity, plant height, flowering time, panicle length and productive tillers were recorded. The results showed highly significant differences among lines for all observed traits. Among the tested lines, 55 including SOSAT C 88 were resistant, 16 moderately resistant and 30 including 7042S were susceptible to the disease. Out of the 55 resistant lines, 20 were disease free. Hierarchical ascendant cluster analysis grouped the lines into three clusters with the DM parameters and plant height as the most discriminant factors. Cluster II contains the susceptible lines, while cluster III comprises the moderately resistant lines. The lines which belongs to cluster I were characterized by their resistance to the disease. Further use of these available new sources of resistance will be very useful for improvement of pearl millet for DM resistance and other agronomic traits.

scholarly journals Assessing Effect of Marker-Based Improvement of Maize Synthetics on Agronomic Performance, Carotenoid Content, Combining Ability and Heterosis

Agronomy ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 1625
Author(s):  
Innocent Iseghohi ◽  
Ayodeji Abe ◽  
Silvestro Meseka ◽  
Wende Mengesha ◽  
Melaku Gedil ◽  
...  
Keyword(s):  
Grain Yield ◽  
Agronomic Traits ◽  
Vitamin A Deficiency ◽  
Inbred Lines ◽  
Provitamin A ◽  
Carotenoid Content ◽  
Agronomic Performance ◽  
Gene Effects ◽  
Additive Gene ◽  
Β Carotene

Vitamin A deficiency (VAD) is a serious problem in sub-Saharan Africa (SSA) and other parts of the world. Understanding the effect of marker-based improvement (MARS) of two maize synthetics (HGA and HGB) representing different heterotic groups on their agronomic performance, carotenoid content, and combining abilities could help identify suitable sources to develop divergent inbred lines for optimizing heterosis. This study involved three selection cycles each of the two synthetics and their nine varietal-cross hybrids together with a released check variety was conducted across four diverse locations in Nigeria in 2018 and 2019. Environment and hybrid effects were significant on grain yield and other agronomic traits as well as provitamin A content and other carotenoids. Genetic improvement per cycle of MARS in the parental synthetics was 15% for provitamin A, 25% for β-carotene and 26% for lutein in HGA and 4% for grain yield, 3% for zeaxanthin and 5% for α-carotene in HGB. Grain yield and agronomic traits of the two maize synthetics were controlled by additive and non-additive gene effects, while provitamin A content and other carotenoids were mainly controlled by additive gene effects. Some selection cycles which were high in grain yield and provitamin A content were identified as potential sources of new and divergent maize inbred lines in maize breeding programs. Some varietal-cross hybrids expressed significant mid-parent heterosis for grain yield and moderate mid-parent heterosis for provitamin A, β-carotene and xanthophylls. These hybrids could be commercialized at reasonable prices to small-scale farmers in rural areas that are most affected by vitamin A deficiency.

scholarly journals Testcross performance and combining ability of early maturing maize inbreds under multiple-stress environments

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Benjamin Annor ◽  
Baffour Badu-Apraku ◽  
Daniel Nyadanu ◽  
Richard Akromah ◽  
Morakinyo A. B. Fakorede
Keyword(s):  
Grain Yield ◽  
Combining Ability ◽  
Central Africa ◽  
Optimal Conditions ◽  
Gene Effects ◽  
Maize Production ◽  
Multiple Stress ◽  
Early Maturing ◽  
Additive Gene ◽  
West And Central Africa

Abstract Availability of multiple-stress tolerant maize is critical for improvement in maize production in West and Central Africa (WCA). A study was carried out to (i) assess a set of inbred lines for combining ability under stressed and optimal conditions, (ii) determine the performance of the testcrosses under different conditions, and (iii) identify outstanding hybrids across the conditions. Two hundred and five testcrosses were planted with five hybrid checks under Striga-infested, low soil nitrogen, drought and optimal conditions between 2015 and 2016 in Nigeria. The grain yield inheritance under optimal condition was largely regulated by additive gene effect whereas non-additive gene effects largely regulated grain yield under the three stresses. Four of the inbreds had significant positive general combining ability effects each under low N and drought, and three under Striga infestation for grain yield. The inbreds could be vital sources of beneficial alleles for development and improvement of tropical yellow maize hybrids and populations. Hybrids TZEI 443 x ENT 13 and TZEI 462 x TZEI 10 were high yielding and stable; they out-performed the three early maturing released hybrids in WCA. The new hybrids should be extensively assessed and released in the sub-region to improve food security.

Combining ability and heterosis studyin maize inbreds throughout diallel mating design

2018 ◽  
Vol 43 (4) ◽  
pp. 599-609
Author(s):  
ANMS Karim ◽  
S Ahmed ◽  
AH Akhi ◽  
MZA Talukder ◽  
A Karim
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Combining Ability ◽  
Gene Action ◽  
General Combining Ability ◽  
Specific Combining Ability ◽  
Gene Effects ◽  
Additive Type ◽  
Additive Gene ◽  
Ear Height

Combining ability effects were estimated for grain yield and some other important agronomic traits of maize in a 7×7 diallel analysis excluding reciprocals. The variances for general combining ability (GCA) were found significant for yield, days to pollen shedding, days to silking and ear height while it was found non-significant for plant height and number of kernels/ear. Non-significant general combining ability (GCA) variance for plant height and number of kernels/ear indicates that these two traits were predominantly controlled by non- additive type of gene action. Specific combining ability (SCA) was significant for all the characters except yield and days to silking. Non-significant specific combining ability (SCA) variance for yield and days to silking suggests that these two traits were predominantly controlled by additive type of gene action. Both GCA and SCA variances were found significant only in days to pollen shedding and ear height indicated the presence of additive as well as non additive gene effects for controlling the traits. However, relative magnitude of these variances indicated that additive gene effects were more prominent for all the characters studied except days to silking. Parent BIL95 was the best general combiner for both high yield and number of kernels/ear and parent BML4 for dwarf plant type. Two crosses (BML4× BML36 and BIL114× BIL31) exhibited significant and positive SCA effects for grain yield involved low × average and average × average general combining parents. The range of heterosis expressed by different crosses for grain yield and days to silking was from -65.83 to 21.26 percent and -17.85 to 8.22 percent, respectively.. The better performing three crosses (BIL114×BIL31, BIL138×BIL95 and BIL31×BIL95) can be utilized for developing high yielding hybrid varieties as well as for exploiting hybrid vigour.Bangladesh J. Agril. Res. 43(4): 599-609, December 2018

Detection and estimation of components of genetic variation and genotype × environment interaction in three wheat crosses

1984 ◽  
Vol 103 (3) ◽  
pp. 543-547 ◽  
Author(s):  
S. Singh ◽  
M. S. Dahiya
Keyword(s):  
Genetic Variation ◽  
Grain Yield ◽  
Plant Height ◽  
Environment Interaction ◽  
Gene Effects ◽  
Genotype Environment Interaction ◽  
Additive Component ◽  
Spike Number ◽  
Additive Gene ◽  
1000 Grain Weight

SummaryThe data obtained from 360 progeny families produced by crossing 40 F2 plants from each of three wheat crosses HD 2009 × HD 1949, Raj 821 × WH 147 and NP 876 × HD 1949, to three testers (the testers being the two parents of each original cross and their F1 in each case) were subjected to triple test cross analysis for detecting and estimating additive, dominance and epistatic components of genetic variation and interaction of these components with environment for plant height, spike length, number of tillers per plant, number of spikelets per spike, number of grains per spike, 1000-grain weight, number of days from sowing to heading and to maturity, grain yield per plant and grain yield/above ground dry matter ratio (harvest index). Epistasis was an important element for plant height, number of tillers per plant, number of grains per spike and grain yield per plant in all three crosses. Both the i type and j and l type epistasis were equally important. In general, the magnitude of additive component was larger than that of dominance component. The additive gene effects were more sensitive to environmental change than the dominance gene effects. Similarly, j and l type epistasis was relatively more sensitive to environment than the i type epistasis.

A study of genotype × environment interaction in three chickpea triple test crosses

1986 ◽  
Vol 107 (3) ◽  
pp. 549-554
Author(s):  
S. Singh ◽  
I. S. Pawar ◽  
I. P. Singh
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Grain Weight ◽  
Environment Interaction ◽  
Gene Effects ◽  
Genotype Environment Interaction ◽  
Triple Test ◽  
Sowing Dates ◽  
Additive Gene ◽  
Number Of Branches

SUMMARYThe analysis of Perkins & Jinks (1971) was applied to 360 progeny families of three chickpea F2 triple test crosses, namely, F 378 × ICCC 1, P 1198–1 × ICCC 1 and US 613 × BG 203, to detect and measure the interaction of additive, dominance and epistatic gene effects with sowing dates. The families were grown in completely randomized blocks in three replications with two sowing dates, and data were recorded for plant height, number of branches per plant, number of days from sowing to flowering, number of days from sowing to maturity, number of pods per plant, number of grains per plant, 100-grain weight and grain yield per plant. The i type epistasis and additive genetic component were relatively more important than j and l type epistasis and dominance component, respectively. The j and l type epistasis and additive gene effects were more sensitive to environmental differences than the i type epistasis and dominance gene effects, respectively.

GENE EFFECTS IN CORN (ZEA MAYS L.): II. RELATIVE IMPORTANCE OF GENE EFFECTS FOR PLANT HEIGHT AND CERTAIN COMPONENT ATTRIBUTES OF YIELD

1962 ◽  
Vol 42 (2) ◽  
pp. 349-358 ◽  
Author(s):  
E. E. Gamble
Keyword(s):  
Plant Height ◽  
Seed Weight ◽  
Zea Mays L ◽  
Inbred Lines ◽  
Relative Importance ◽  
Additive Effects ◽  
Gene Effects ◽  
Additive Gene Effects ◽  
Additive Gene ◽  
Kernel Row Number

Estimates of mean effects, additive, dominance, additive × additive, additive × dominance, and dominance × dominance gene effects were obtained for 15 crosses from 6 inbred lines of corn for each of the following attributes: plant height, kernel row number, ear length, ear diameter, and seed weight.All the gene effects were found to contribute to inheritance of the attributes in the crosses studied. However, not all gene effects are present in all crosses. Mean effects were the most important contributors to the inheritance of the attributes. Of the gene effects, the dominance gene effects were the most important contributors to the inheritance of the attributes except for kernel row number. Additive, dominance and epistatic gene effects appear to contribute more or less equally to the inheritance of kernel row number. Additive gene effects were more important for these attributes than for yield. They were relatively more important for kernel row number, ear diameter, and seed weight than for plant height and ear length.Epistatic gene effects were relatively more important than additive gene effects but less important than dominance gene effects for the material studied. For the attributes studied the additive × dominance and dominance × dominance gene effects were somewhat more important contributors to inheritance than the additive × additive effects.

Estimates of variation and heritability of some quantitative and quality characters in Triticum turgidum L. ssp. durum (Desf.)

2007 ◽  
Vol 55 (2) ◽  
pp. 261-264
Author(s):  
S. Sharma ◽  
Y. Sharma
Keyword(s):  
Grain Yield ◽  
Durum Wheat ◽  
Protein Content ◽  
Plant Height ◽  
Harvest Index ◽  
Gene Effects ◽  
Additive Gene Effects ◽  
Wide Range ◽  
Additive Gene ◽  
High Heritability

The results obtained for the parental, F 1 and F 2 generations of a 10 × 10 diallel set (excluding reciprocals) of durum wheat revealed that there were significant differences between all the hundred genotypes for all the characters. The genotypes represented a wide range of expression for almost all the characters. High estimates of GCV (genetic coefficient of variation) were observed for the number of effective tillers, grain yield per plant, harvest index and 1000-grain weight. The low values of GCV recorded for days to heading, grain protein content and plant height indicated their limited scope for improvement. High heritability (h 2 ) values ranging from 92.27% (grain yield/plant) to 99.00% (protein content) were observed for all the characters. The highest expected GA (genetic advance) as a percentage of the mean was manifested for harvest index, followed by plant height, number of effective tillers per plant and grain yield per plant. These traits also possessed high estimates of heritability, indicating that most of the variation in these characters was due to additive gene effects. For protein content high heritability was observed with low genetic gain, indicating non-additive gene effects. Thus, a systematic approach based on selection for harvest index, plant height and number of effective tillers per plant on the basis of high per se performance would be the most effective approach for improving the yield level of durum wheat. The wealth of variability available in the hybrid populations offers good prospects for its improvement in the near future.

scholarly journals Popping volume and grain yield in diallel set of popcorn inbred lines

Genetika ◽  
2008 ◽  
Vol 40 (3) ◽  
pp. 249-260 ◽  
Author(s):  
Zorica Pajic ◽  
Uros Eric ◽  
Jelena Srdic ◽  
Snezana Mladenovic-Drinic ◽  
Milomir Filipovic
Keyword(s):  
Grain Yield ◽  
Analysis Of Variance ◽  
Combining Ability ◽  
Inbred Lines ◽  
Gene Effects ◽  
Additive Gene Effects ◽  
Satisfactory Yield ◽  
Genetic Components ◽  
Additive Gene ◽  
Superior Genotypes

Popping volume and yield are traits caused by several heredity factors. It is difficult to obtain superior genotypes for both traits but it is possible to develop genotypes with good popping volume and satisfactory yield. The hybrid ZPPL2 x ZPPL5 was superior in yield, heterosis and SCA for both yield and popping volume. As inbred ZPPL4 in all combinations has a good value for popping volume could be concluded that this inbred may be used as parent in further crosses. Analysis of variance of the combining ability indicating significant SCA effect for grain yield, and significant both GCA and SCA effects for popping volume. Therefore it can be stated that yield is influenced by non-additive and popping volume by both additive and non- additive gene effects. Analysis of variance of genetic components for popping volume indicates that the additive as well as dominant components significantly affected the inheritance of this trait in popcorn. The objective of this study was to evaluate heteorsis and combing ability for grain yield and popping volume in dialalel set of six maize inbred lines.

scholarly journals Identification of Heterotic Pairs by Full-Sib Reciprocal Recurrent Selection in Maize Synthetic Populations on Turda CompositeA(B)(2) x Turda CompositeB(A)(2)

2013 ◽  
Vol 70 (1) ◽  
pp. 208-213
Author(s):  
Andreea Daniela ONA ◽  
Ioan HAȘ ◽  
Ivan ILARIE ◽  
Voichița HAȘ ◽  
Nicolae TRITEAN ◽  
...  
Keyword(s):  
Recurrent Selection ◽  
Inbred Lines ◽  
Heterotic Group ◽  
Yield Potential ◽  
Reciprocal Recurrent Selection ◽  
Maize Breeding ◽  
Gene Effects ◽  
Synthetic Populations ◽  
Additive Gene ◽  
Selection Test

In the last 40 years, pre-breeding works induced, in more and more centers of maize breeding, full-sib reciprocal recurrent selection programmes to identify some heterotic pairs which can be sources for obtaining performance inbred lines. The aim is to identify the heterotic pairs with the best results according to the yield potential of maize, the breaking and falling resistance, and the grains moisture at the harvesting time. The creation programme of A and B composite population started at ARDS Turda in 1985. Inside of A composite came the next inbred lines: B73, A632, M117, TC209, T291, being from the B SSS heterotic group, and inside of B composite came the inbred lines Mo17, C103, TC 208, T248, W633, appreciated by us or being related to Lancaster Sure Crop heterotic group. The experimentation was done in two orientation comparative cultures, each one with 49 variants, in 4 repetitions; the comparative culture was a balanced quadratic grid of 7x7 type. From each culture were chosen the first six variants, which were evaluated according to the next characters: production potential, breaking and falling resistance, grains moisture at harvest. The presented results are a part from the second cycle of full-sib reciprocal recurrent selection. Test crosses and self-pollinations were made on plants from the two composites which had two cobs; on the first cob from A Composite realised the cross with the corresponding plant from the B Composite, and from the plant panicle of the B Composite was collected pollen to pollinate the chosen plant from the A Composite. At the both plants from the crossing, the second cob was self-pollinated and kept in reserve until 2010, when the test crosses was experimented and were selected the pairs with the best results according to the above characters. Using the full-sib reciprocal recurrent selection, we can successfully harnessing, simultaneously, the additive and non-additive gene effects.

Sign in / Sign up

Export Citation Format

Share Document