scholarly journals A Generalized Capillary Imbibition Model for Porous Media in Tight Reservoirs

2018 ◽  
Vol 2018 ◽  
pp. 1-8 ◽  
Author(s):  
Zhiyuan Wang ◽  
Zhengming Yang ◽  
Yunhong Ding ◽  
Wei Lin ◽  
Ying He ◽  
...  

Capillary imbibition models have been widely studied in oil and gas development field over the past decades. However, the existing models applied to the tight reservoirs rarely take fluid flow resistance and apparent viscosity into account. To investigate the capillary imbibition characteristics of fluids in tight porous media, a generalized capillary imbibition model considering the flow resistance and apparent viscosity of fluids in tight porous media is derived. By comparing with the results of other capillary imbibition models and experimental data, the derived capillary imbibition model is verified. In addition, compared with the conventional capillary imbibition models, the derived capillary imbibition model is more consistent with the experimental results and has a wider applicability. The imbibition distance of water in tight reservoirs can also be obtained using the derived capillary imbibition model, which will facilitate the study on water injection development in tight oil and gas reservoirs.

2021 ◽  
Vol 73 (07) ◽  
pp. 57-57
Author(s):  
Leonard Kalfayan

As unconventional oil and gas fields mature, operators and service providers are looking toward, and collaborating on, creative and alternative methods for enhancing production from existing wells, especially in the absence of, or at least the reduction of, new well activity. While oil and gas price environments remain uncertain, recent price-improvement trends are supporting greater field testing and implementation of innovative applications, albeit with caution and with cost savings in mind. Not only is cost-effectiveness a requirement, but cost-reducing applications and solutions can be, too. Of particular interest are applications addressing challenging well-production needs such as reducing or eliminating liquid loading in gas wells; restimulating existing, underperforming wells, including as an alternative to new well drilling and completion; and remediating water blocking and condensate buildup, both of which can impair production from gas wells severely. The three papers featured this month represent a variety of applications relevant to these particular well-production needs. The first paper presents a technology and method for liquid removal to improve gas production and reserves recovery in unconventional, liquid-rich reservoirs using subsurface wet-gas compression. Liquid loading, a recurring issue downhole, can severely reduce gas production and be costly to remediate repeatedly, which can be required. This paper discusses the full technology application process and the supportive results of the first field trial conducted in an unconventional shale gas well. The second paper discusses the application of the fishbone stimulation system and technique in a tight carbonate oil-bearing formation. Fishbone stimulation has been around for several years now, but its best applications and potential have not necessarily been fully understood in the well-stimulation community. This paper summarizes a successful pilot application resulting in a multifold increase in oil-production rate and walks the reader through the details of the pilot candidate selection, completion design, operational challenges, and lessons learned. The third paper introduces and proposes a chemical treatment to alleviate phase trapping in tight carbonate gas reservoirs. Phase trapping can be in the form of water blocking or increasing condensate buildup from near the wellbore and extending deeper into the formation over time. Both can reduce relative permeability to gas severely. Water blocks can be a one-time occurrence from drilling, completion, workover, or stimulation operations and can often be treated effectively with solvent plus proper additive solutions. Similar treatments for condensate banking in gas wells, however, can provide only temporary alleviation, if they are even effective. This paper proposes a technique for longer-term remediation of phase trapping in tight carbonate gas reservoirs using a unique, slowly reactive fluid system. Recommended additional reading at OnePetro: www.onepetro.org. SPE 200345 - Insights Into Field Application of Enhanced-Oil-Recovery Techniques From Modeling of Tight Reservoirs With Complex High-Density Fracture Network by Geng Niu, CGG, et al. SPE 201413 - Diagnostic Fracture Injection Test Analysis and Simulation: A Utica Shale Field Study by Jeffery Hildebrand, The University of Texas at Austin, et al.


2014 ◽  
Vol 556-562 ◽  
pp. 4647-4650
Author(s):  
Yong Wang

With the rapid development of China's national economy, oil and gas development and utilization of resources is also increasing, dwindling reserves of conventional oil and gas reservoirs. These inevitably lead to oil and gas exploration direction shifted gradually from shallow depth, by a conventional steering reservoir unconventional oil and gas reservoirs, fractured reservoirs will become the focus of the current oil and gas exploration areas. This paper studied the basic theory of fractured media, from the speed and the amplitude of pre-stack anisotropic characteristics are analyzed theoretically. Researches of these basic theories of EDA media provide a basis for the exploration of the fractured reservoirs.


2012 ◽  
Vol 524-527 ◽  
pp. 1355-1358 ◽  
Author(s):  
Yu Kun Du ◽  
Rui He Wang ◽  
Hong Jian Ni ◽  
Hong Jun Huo

The technical problems during the development of unconventional oil and gas reservoirs are becoming more and more difficult to handle with conventional drilling and production methods. Supercritical carbon dioxide has so many good properties such as high rock-breaking drilling efficiency, strong dissolved displacement performance and unharmful effect on the reservoir that it can be used as a drilling, completion and production medium to effectively exploit the unconventional oil and gas reservoirs. The global distribution of unconventional oil and gas resources is introduced, application status of carbon dioxide in oil and gas development is discussed, and development prospects of supercritical carbon dioxide in the unconventional oil and gas reservoirs are systematically analyzed. Using supercritical carbon dioxide as a medium in the whole development process is an important trend of unconventional oil and gas development technologies.


2021 ◽  
Author(s):  
Zuhair AlYousef ◽  
Ali Altaq ◽  
Muhammad Almajid ◽  
Lyla Almaskeen

Abstract Foams are used in many oil and gas applications including conformance control during EOR processes, fracturing, and acidizing operations. Foams are defined as dispersions of gas bubbles into a continuous liquid phase. Typically, foams are generated when an injection gas such as nitrogen, carbon dioxide, or flue gas is mixed with an injection fluid containing a foaming agent. This method, however, requires a gas source to be present for foams to be generated. The objective of this study is to evaluate a new alternative technique for foam generation using two salt solutions. Nitrogen gas is generated as a result of the reaction of the two salt solutions at specific conditions. This generated nitrogen gas is then used for foam generation in porous media. The foam generated using the two salt solutions is tested in a microfluidic device (rock-on-a-chip) to study the gas mobility reduction in porous media. A Foam rheometer apparatus is also used to measure foam apparent viscosity when the two salt solutions are mixed with a foaming agent. The results are compared with those obtained when nitrogen gas is injected into the system independently in the absence of the two salt solutions. Results reveal that the amount of added salts significantly impact the produced nitrogen volume. Additionally, the test conditions especially the temperature, significantly impacts the reaction rate. The rate of nitrogen gas generation is directly proportional to the temperature when tested at 25-80°C. In addition, experiments demonstrate that the foams generated using the two salt solutions reaction have almost identical characteristics as those produced when nitrogen gas is injected into the foam rheometer apparatus independently. Both methods generate the same foams with comparable foam apparent viscosity. In the microfluidic system, the foam obtained using the two salt solutions in the presence of a foaming agent shows excellent resistance to gas flow and subsequently exhibit large gas mobility reduction. This experimental study, for the first time, confirms the ability of the two salt solutions reaction to generate nitrogen gas spontaneously upon contact under certain conditions. The generated gas is used to generate foams in the presence of a foaming agent. This newly proposed technique of foam generation could significantly impact many oil and gas operations including conformance control during EOR processes, fracturing, and acid stimulation operations.


2019 ◽  
Vol 965 ◽  
pp. 69-77 ◽  
Author(s):  
Emilia Fernandes de Medeiros Rocha ◽  
Osvair Vidal ◽  
Erika Tomie Koroishi ◽  
Janeth Alina Vidal Vargas ◽  
Luis Fernando Lamas de Oliveira

Carbon dioxide (CO2) is considered one of the main gases that cause global warming. In this perspective, its injection in aquifers and oil and gas reservoirs has been a possible alternative to reduce its emission in the atmosphere. An alternative strategy in which CO2 is used efficiently in the Oil Industry is the Carbonated Water Injection (CWI), where the carbon dioxide is injected through the reservoir dissolved in the brine, eliminating problems of gravitational segregation and low sweeping efficiency present in other gas injection methods. Once injected, the fluid may react with the carbonate rock and inducing their dissolution, causing changes in the petrophysical properties of the rock. This work investigated changes in the average porosity of carbonate samples from Brazilian reservoir through a dynamic flow test with enriched brine with 100% CO2 injection under high pressure and high temperature conditions and simulating a region around the face of the injector well, with an injection pressure of 8,500 psi, a temperature of 70 °C and a flow rate of 2cm3/min. The core-flooding experimental setup includes two coreholders arranged in series with samples confined in its interior, which are swept by X-ray Computed Tomography (CT), taking measurements of average porosity data. The results showed that there was dissolution in the sample assembled in the first coreholder since the porosity had increased, while in the second, no significant alterations of the porosity were observed (around 8.5% of its initial value). This observation can still be confirmed by the analysis of the dissolved moles, which exhibit behavior similar to the porosity, indicating that some minerals actually suffered dissolution from the injection of carbonated brine.


2021 ◽  
Author(s):  
Xuan Xu ◽  
Yujing Wan ◽  
Xizhe Li ◽  
yong Hu ◽  
qingyan mei ◽  
...  

Abstract Traditional porous media imbibition models deviate from the actual imbibition process in oil and gas reservoirs. Experimental studies on gas-water imbibition in reservoirs were carried out to describe the dynamic profile variation process of wet phase saturation in reservoirs and to further reveal the variation of the imbibition front and the imbibition amount. Optimization and correction methods were established, and experimental verifications were performed. Studies have shown the following: (1) Unlike homogeneous porous media, the water phase imbibition process in oil and gas reservoirs is more complicated, and it is impossible for the maximum saturation of imbibition to reach 100%. (2) Contrary to the theoretical hypothesis, the imbibition of water is not piston-like, and there is a clear transition zone at the imbibition front. This transition zone is the main cause of water saturation variations in the imbibition zone; with the expansion of the imbibition zone, the influence of the transition zone on water saturation weakens. (3) Traditional theoretical models predict a positive correlation between the imbibition amount and the measurements; however, there is a large deviation in the numerical values, which must be corrected. (4) The L-W model was optimized and the parameter group fluid factor and the reservoir factor were proposed to characterize the properties of the fluid and the reservoir, respectively. These two parameters have a clear physical significance and are easy to accurately test. After experimental correction, the parameters are favourably suitable for oil and gas reservoirs.


2020 ◽  
Vol 11 (1) ◽  
pp. 7712-7724

Smart water injection in oil and gas reservoirs is one of the most popular and low-cost methods to increase the recovery factor of reservoirs. However, due to the abundance of sandstone reservoirs in the world and the necessity to increase recovery in these types of reservoirs, injection of smart water will disturb the distribution of intergranular stresses in the porous media which results in sand production that causes many problems in many parts of the petroleum industry. For this reason, the necessity to investigate possible parameters affecting sand production was increased. Also, according to the relative researches, the injection of smart water changes the reservoir pH, which could change the sand production rate. In this paper, a comprehensive study on the effect of pH or alkalinity on sand production, as well as the effect and mechanism of silica nanoparticles, has been performed to control the grains separated from the rock. The effect and mechanism of silica nanoparticles with economic concerns have also been analyzed, which can significantly reduce and control the amount of sand production. In this paper, we can determine the effectiveness and the most effective parameters in an acidic or basic environment.


2021 ◽  
pp. 53-56
Author(s):  
N.T. Mammadov ◽  

The processes of produced water control in oil-gas industry lead to the periodical environmental improvement. Proceeding intensive oil development in Absheron peninsula throughtout over 150 years led to the increase of flooding percentage and oil decrease in geological reservoir. Therefore, due to the fact that the capacity of produced water together with oil exceeds for several times the total capacity of extracted oil, the issues associated with the further recycling and systematic control on produced water are particularly topical. The implementation of fully closed system of produced water control formed in the oil and gas development in Absheron territory is considered the need of the hour. It is necessary to study the current ecological situation in oil-gas fields, increase the production efficiency and reduce the impact on environment, offering more improved methods based on up-to-date scientific and methodological analysis. The reduction of produced water capacity and gradual environmental improvement may be achieved due to the decrease of operation of highly flooded wells in the old oil-gas fields. Due to the produced water deposition from the oil in the sedimentary rocks and scavenger wells, the amount of oil in the water reduced for several times, and in this case it is possible to reduce the effect of hydrocarbons on the soil, water and atmosphere.


2015 ◽  
Vol 1092-1093 ◽  
pp. 1480-1484 ◽  
Author(s):  
Chao Li ◽  
Xiong Lu ◽  
Hua Yan ◽  
Xiao Fei Yu ◽  
Feng Kou ◽  
...  

Reservoir evaluation, which works throughout the oil and gas development, has always focused on exploration and development needs [1-3].There are many influencing factors and data in the evaluation process, thus it’s difficult to select the reasonable evaluation parameters and methods. Selecting the appropriate evaluation parameters and evaluation methods can improve the accuracy of evaluation, reduce the evaluation workload. Regional studies have shown that Delta-front sub-facies is the major sedimentary type of the Chang 8 in Baibao oilfield, widely distributed delta distributary channel and mouth bar sands are good oil and gas reservoirs in the area. In this paper, cluster analysis reservoir evaluation is using to obtain their correct evaluation parameters, in order to provide the basis for further development.


Sign in / Sign up

Export Citation Format

Share Document