scholarly journals On the Folding Mechanics of Square Columns with Double-Surfaced Gradients

2019 ◽  
Vol 2019 ◽  
pp. 1-16
Author(s):  
Junxian Zhou ◽  
Ruixian Qin ◽  
Bingzhi Chen
Keyword(s):  
Energy Absorption ◽  
Mathematical Expression ◽  
Absorption Efficiency ◽  
Material Distribution ◽  
Average Thickness ◽  
Distribution Law ◽  
Finite Element Program ◽  
Global Average ◽  
Element Program ◽  
Distribution Type

The implementation of graded thicknesses in structural designs is an efficient strategy for improving the energy absorption performance of thin-walled columns. In this study, the mechanical responses of square columns with double-surfaced gradients under axial crushing forces were analytically and numerically investigated. A mathematical expression for the mean crushing force on a novel tube design is derived according to the super folding element method by introducing two novel parameters: the average thickness of the efficient energy absorbing region (EEAR) and global average thickness. The analytical predictions show good agreement with the simulation results that were obtained using the nonlinear finite element program ANSYS/LS-DYNA. The results demonstrate that a greater coefficient of average thickness of the EEAR versus global average thickness improves the energy absorption efficiency. However, increasing this coefficient largely depends on the sectional material distribution law. To explore the effects of this law on crushing responses, three different material distribution types were investigated. A significant improvement in specific energy absorption (approximately 30%) was obtained for a double-surfaced column with an optimized material distribution type compared to that of a square column with a uniform thickness.

Numerical simulation of hybrid composite tubes under oblique compression

2017 ◽  
Vol 14 (2) ◽  
pp. 173-177 ◽  
Author(s):  
Al Emran Ismail ◽  
N. Nezere
Keyword(s):  
Energy Absorption ◽  
Kinematic Hardening ◽  
Shell Element ◽  
Steel Tube ◽  
Finite Element Program ◽  
Content Type ◽  
Contact Algorithm ◽  
Element Program ◽  
Energy Absorbing ◽  
Force Displacement

Purpose An energy-absorbing device is an important tool that is capable of increasing the survivability of passengers in vehicles. Generally, empty metallic tubes are used, and it is found that the energy absorption capability is lower than the energy obtained using composite materials. Therefore, this paper numerically presents the crushing performances of hybrid tubes under axial and oblique compressions. Design/methodology/approach Three important parameters are used such as fiber thicknesses, fiber orientations and oblique compression angles. Epoxy-reinforced fibers are wrapped around the steel tubes and it is then modeled numerically using the ANSYS finite element program. Belytscho – Tsay shell element is used to model the composites, while a bilinear kinematic hardening model is used to model the steel tube. A proper contact algorithm is implemented to prevent interpenetration among elements and surfaces. Findings A proper contact algorithm is implemented to prevent interpenetration among elements and surfaces. Hybrid tubes are quasi-statically crushed and force–displacement curves are extracted and analyzed. Originality/value It is found that the introduction of oblique compressions has induced bending moments and therefore decreases the energy absorption capability. Varying fiber orientations also insignificantly changed the crushing performances. However, wrapping carbon/epoxy composite that is capable of strengthening the tubes, is also subjected to oblique compression compared with the glass/epoxy composites.

Friction Force and Stresses Analysis for Contact of Assembled Details

2006 ◽  
Vol 113 ◽  
pp. 334-338
Author(s):  
Z. Dreija ◽  
O. Liniņš ◽  
Fr. Sudnieks ◽  
N. Mozga
Keyword(s):  
Mechanical Properties ◽  
Surface Roughness ◽  
Plastic Deformation ◽  
Friction Force ◽  
Sliding Friction ◽  
Friction Model ◽  
Contact Interface ◽  
Finite Element Program ◽  
Elastic Plastic ◽  
Element Program

The present work deals with the computation of surface stresses and deformation in the presence of friction. The evaluation of the elastic-plastic contact is analyzed revealing three distinct stages that range from fully elastic through elastic-plastic to fully plastic contact interface. Several factors of sliding friction model are discussed: surface roughness, mechanical properties and contact load and areas that have strong effect on the friction force. The critical interference that marks the transition from elastic to elastic- plastic and plastic deformation is found out and its connection with plasticity index. A finite element program for determination contact analysis of the assembled details and due to details of deformation that arose a normal and tangencial stress is used.

scholarly journals The impact of drilling and slitting construction on damage field: evolution characteristics in low-permeability coal seam

2021 ◽  
Vol 37 ◽  
pp. 205-215
Author(s):  
Heng Chen ◽  
Hongmei Cheng ◽  
Aibin Xu ◽  
Yi Xue ◽  
Weihong Peng
Keyword(s):  
Finite Element ◽  
Rock Mass ◽  
Damage Mechanics ◽  
Effective Strain ◽  
Secondary Development ◽  
Distribution Area ◽  
Finite Element Program ◽  
Element Program ◽  
Mining Face ◽  
The Impact

ABSTRACT The fracture field of coal and rock mass is the main channel for gas migration and accumulation. Exploring the evolution law of fracture field of coal and rock mass under the condition of drilling and slitting construction has important theoretical significance for guiding efficient gas drainage. The generation and evolution process of coal and rock fissures is also the development and accumulation process of its damage. Therefore, based on damage mechanics and finite element theory, the mathematical model is established. The damage variable of coal mass is defined by effective strain, the elastoplastic damage constitutive equation is established and the secondary development of finite element program is completed by FORTRAN language. Using this program, the numerical simulation of drilling and slitting construction of the 15-14120 mining face of Pingdingshan No. 8 Mine is carried out, and the effects of different single borehole diameters, different kerf widths and different kerf heights on the distribution area of surrounding coal fracture field and the degree of damage are studied quantitatively. These provide a theoretical basis for the reasonable determination of the slitting and drilling arrangement parameters at the engineering site.

Mechanical Property Analysis and Numerical Simulation of Honeycomb Sandwich Structure’s Core

2013 ◽  
Vol 631-632 ◽  
pp. 518-523 ◽  
Author(s):  
Xiang Li ◽  
Min You
Keyword(s):  
Numerical Simulation ◽  
Elastic Constants ◽  
Sandwich Structure ◽  
Optimization Design ◽  
Simulation Analysis ◽  
Finite Element Program ◽  
Honeycomb Sandwich ◽  
Calculation Results ◽  
Element Program ◽  
Typical Satellite

Owing to the lack of a good theory method to obtain the accurate equivalent elastic constants of hexagon honeycomb sandwich structure’s core, the paper analyzed mechanics performance of honeycomb sandwich structure’s core and deduced equivalent elastic constants of hexagon honeycomb sandwich structure’s core considering the wall plate expansion deformation’s effect of hexagonal cell. And also a typical satellite sandwich structure was chose as an application to analyze. The commercial finite element program ANSYS was employed to evaluate the mechanics property of hexagon honeycomb core. Numerical simulation analysis and theoretical calculation results show the formulas of equivalent elastic constants is correct and also research results of the paper provide theory basis for satellite cellular sandwich structure optimization design.

Finite Element Analysis on the Deformation of Energy-Saving Wire-Mesh Frame Wallboard

2014 ◽  
Vol 501-504 ◽  
pp. 731-735
Author(s):  
Li Zhang ◽  
Kang Li
Keyword(s):  
Finite Element ◽  
Energy Saving ◽  
Theoretical Basis ◽  
Steel Wire ◽  
Wire Mesh ◽  
Design Parameters ◽  
Element Analysis ◽  
Finite Element Program ◽  
Element Program ◽  
Influence Degree

This paper analyzes the influence degree of related design parameters of wire-mesh frame wallboard on deformation through finite element program, providing theoretical basis for the design and test of steel wire rack energy-saving wallboard.

Transferability of the Gurson Damage Model Parameters with Charpy and Tensile Tests with Different Constrain Level

2009 ◽  
Vol 65 ◽  
pp. 19-31
Author(s):  
Ruben Cuamatzi-Melendez ◽  
J.R. Yates
Keyword(s):  
Strain Rate ◽  
Damage Model ◽  
Rolling Direction ◽  
Fracture Initiation ◽  
Tensile Tests ◽  
Model Parameters ◽  
Gurson Model ◽  
Finite Element Program ◽  
Element Program ◽  
Gurson's Model

Little work has been published concerning the transferability of Gurson’s ductile damage model parameters in specimens tested at different strain rates and in the rolling direction of a Grade A ship plate steel. In order to investigate the transferability of the damage model parameters of Gurson’s model, tensile specimens with different constraint level and impact Charpy specimens were simulated to investigate the effect of the strain rate on the damage model parameters of Gurson model. The simulations were performed with the finite element program ABAQUS Explicit [1]. ABAQUS Explicit is ideally suited for the solution of complex nonlinear dynamic and quasi–static problems [2], especially those involving impact and other highly discontinuous events. ABAQUS Explicit supports not only stress–displacement analyses but also fully coupled transient dynamic temperature, displacement, acoustic and coupled acoustic–structural analyses. This makes the program very suitable for modelling fracture initiation and propagation. In ABAQUS Explicit, the element deletion technique is provided, so the damaged or dead elements are removed from the analysis once the failure criterion is locally reached. This simulates crack growth through the microstructure. It was found that the variation of the strain rate affects slightly the value of the damage model parameters of Gurson model.

scholarly journals Numerical Analyses of Earthquake Induced Liquefaction and Deformation Behaviour of an Upstream Tailings Dam

2017 ◽  
Vol 2017 ◽  
pp. 1-12 ◽  
Author(s):  
Muhammad Auchar Zardari ◽  
Hans Mattsson ◽  
Sven Knutsson ◽  
Muhammad Shehzad Khalid ◽  
Maria V. S. Ask ◽  
...  
Keyword(s):  
Finite Element ◽  
Seismic Event ◽  
Deformation Behaviour ◽  
Ground Surface ◽  
Tailings Dam ◽  
Limited Extent ◽  
Northern Sweden ◽  
Finite Element Program ◽  
Dynamic Analyses ◽  
Element Program

Much of the seismic activity of northern Sweden consists of micro-earthquakes occurring near postglacial faults. However, larger magnitude earthquakes do occur in Sweden, and earthquake statistics indicate that a magnitude 5 event is likely to occur once every century. This paper presents dynamic analyses of the effects of larger earthquakes on an upstream tailings dam at the Aitik copper mine in northern Sweden. The analyses were performed to evaluate the potential for liquefaction and to assess stability of the dam under two specific earthquakes: a commonly occurring magnitude 3.6 event and a more extreme earthquake of magnitude 5.8. The dynamic analyses were carried out with the finite element program PLAXIS using a recently implemented constitutive model called UBCSAND. The results indicate that the magnitude 5.8 earthquake would likely induce liquefaction in a limited zone located below the ground surface near the embankment dikes. It is interpreted that stability of the dam may not be affected due to the limited extent of the liquefied zone. Both types of earthquakes are predicted to induce tolerable magnitudes of displacements. The results of the postseismic slope stability analysis, performed for a state after a seismic event, suggest that the dam is stable during both the earthquakes.

Application of a multilaminate model to simulate the undrained response of structured clay to shield tunnelling

2008 ◽  
Vol 45 (1) ◽  
pp. 14-28 ◽  
Author(s):  
H. Kien Dang ◽  
Mohamed A. Meguid
Keyword(s):  
Field Measurements ◽  
Soil Parameters ◽  
Explicit Integration ◽  
Integration Algorithm ◽  
Finite Element Program ◽  
Surface Displacements ◽  
Implicit Integration Algorithm ◽  
Element Program ◽  
Shield Tunnelling ◽  
Structured Clay

A constitutive model based on the multilaminate framework has been implemented into a finite element program to investigate the effect of soil structure on the ground response to tunnelling. The model takes into account the elastic unloading–reloading, inherent and induced anisotropy, destructuration, and bonding effects. The model is successfully calibrated and used to investigate the undrained response of structured sensitive clay in the construction of the Gatineau tunnel in Gatineau, Quebec. Numerical results were compared to the field measurements taken during tunnel construction. To improve the performance of the numerical model, an implicit integration algorithm is implemented and proven to be very effective when coupled with the multilaminate framework as compared to the conventional explicit integration methods. The effect of different soil parameters including bonding and anisotropy on the tunnelling induced displacements and lining stresses is also examined using a comprehensive parametric study. The results indicated that soil bonding and anisotropy have significant effects on the shape of the settlement trough as well as the magnitudes of surface displacements and lining stresses induced by tunnelling.

Sign in / Sign up

Export Citation Format

Share Document