scholarly journals Employment of Alginate Floating In Situ Gel for Controlled Delivery of Celecoxib: Solubilization and Formulation Studies

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Bazigha K. Abdul Rasool ◽  
AlZahraa Khalifa ◽  
Eman Abu-Gharbieh ◽  
Rawoof Khan
Keyword(s):  
Ftir Spectroscopy ◽  
Sodium Alginate ◽  
Oral Bioavailability ◽  
Release Kinetics ◽  
Reference Drug ◽  
Alginate Concentration ◽  
Anti Inflammatory ◽  
Peg 600

Celecoxib (CXB) is a COX-2-selective nonsteroidal anti-inflammatory drug used to control pain and various inflammatory conditions. CXB has limited oral bioavailability and a slow dissociation rate due to its poor water solubility. In order to enhance the oral bioavailability of CXB and reduce the frequency of administration, the present study was aimed at enhancing the aqueous solubility of CXB by a cosolvency technique and then at formulating and evaluating a CXB in situ floating gelling system for sustained oral delivery. Three cosolvents, namely, PEG 600, propylene glycol, and glycerin, at different concentrations, were used to solubilize CXB. Particle size analysis was performed to confirm the solubility of CXB in the solutions. The floating in situ gel formulations were then prepared by the incorporation of the CXB solution into sodium alginate solutions (0.25, 0.5, and 1% w/v). Formulations, in sol form, were then in vitro characterized for their physical appearance, pH, and rheological behaviors, while formulations in gel form were evaluated for their floating behavior and in vitro drug release studies. FTIR spectroscopy was performed to examine drug-polymer interaction. The selected formula was evaluated biologically for its anti-inflammatory and analgesic activities. Results revealed that the less-polar solvent PEG 600 at 80% v/v had the highest solubilization potential, and it was used to optimize the in situ gel formulation. The candidate formula (F3) was found to have the highest sodium alginate concentration (1% w/v) and showed the optimum sustained release profile with the Higuchi model release kinetics. The results from the FTIR spectroscopy analysis showed noticeable drug-polymer molecular interaction. Moreover, F3 exhibited a significantly higher percentage of paw edema inhibition at 8 h compared with the reference drug (p<0.05). Also, it showed a sustained duration of analgesia that persisted for the entire experimental time.

scholarly journals SODIUM ALGINATE/GELATIN MICROBEADS-INTERCALATED WITH KAOLIN NANOCLAY FOR EMERGING DRUG DELIVERY IN WILSON’S DISEASE

2019 ◽  
pp. 71-80 ◽  
Author(s):  
O. SREEKANTH REDDY ◽  
M. C. S. SUBHA ◽  
T. JITHENDRA ◽  
C. MADHAVI ◽  
K. CHOWDOJI RAO ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Drug Release ◽  
Ftir Spectroscopy ◽  
Sodium Alginate ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Vitro Release ◽  
Scanning Electron

Objective: The aim of the present study was to fabricate and evaluate the drug release studies using Sodium Alginate (SA) and Gelatin (GE) microbeads intercalated with Kaolin (KA) nanoclay for sustained release of D-Penicillamine (D-PA). Methods: Sodium alginate/gelatin/Kaolin blend microbeads were prepared by an extrusion method by using glutaraldehyde (GA) as a crosslinker. The obtained microbeads were characterized by Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) and X–ray diffraction (XRD). Drug release kinetics of the microbeads was investigated in simulated intestinal fluid (pH 7.4) at 37 °C. Results: Microbeads formation was confirmed by FTIR spectroscopy. X-RD reveals that the KA should be intercalated with the drug and also it confirms the molecular level dispersion of D-Penicillamine into microbeads. Scanning Electron Microscopy (SEM) studies reveal that the beads were in spherical shape with some wrinkled depressions on the surface. The in vitro release study indicates the D-Penicillamine released in a controlled manner. The in vitro release kinetics was assessed by Korsmeyer-Peppas equation and the ‘n’ value lies in between 0.557-0.693 indicates Non-Fickian diffusion process. Conclusion: The results suggest that the developed KA intercalated microbeads are good potential drug carrier for the controlled release of D-PA.

scholarly journals Formulation and Evaluation of Floating Oral In Situ Gelling System of Amoxicillin

2011 ◽  
Vol 2011 ◽  
pp. 1-8 ◽  
Author(s):  
Dasharath M. Patel ◽  
Divyesh K. Patel ◽  
Chhagan N. Patel
Keyword(s):  
Drug Release ◽  
Sodium Alginate ◽  
Release Kinetics ◽  
Methyl Cellulose ◽  
Lag Time ◽  
Solution Viscosity ◽  
High Dose ◽  
In Situ Gelling

Purpose. Effective Helicobacter pylori eradication requires delivery of the antibiotic locally in the stomach. High dose of amoxicillin (750 to 1000 mg) is difficult to incorporate in floating tablets but can easily be given in liquid dosage form. Keeping the above facts in mind, we made an attempt to develop a new floating in situ gelling system of amoxicillin with increased residence time using sodium alginate as gelling polymer to eradicate H. pylori. Methods. Floating in situ gelling formulations were prepared using sodium alginate, calcium chloride, sodium citrate, hydroxypropyl methyl cellulose K100, and sodium bicarbonate. The prepared formulations were evaluated for solution viscosity, floating lag time, total floating time, and in vitro drug release. The formulation was optimized using a 32 full factorial design. Dissolution data were fitted to various models to ascertain kinetic of drug release. Regression analysis and analysis of variance were performed for dependent variables. Results. All formulations (F1–F9) showed floating within 30 s and had total floating time of more than 24 h. All the formulations showed good pourability. It was observed that concentration of sodium alginate and HPMC K100 had significant influence on floating lag time, cumulative percentage drug release in 6 h and 10 h. The batch F8 was considered optimum since it showed more similarity in drug release () to the theoretical release profile. Conclusion. Floating in situ gelling system of amoxicillin can be formulated using sodium alginate as a gelling polymer to sustain the drug release for 10 to 12 h with zero-order release kinetics.

scholarly journals Formulation and development of metformin-loaded microspheres using Khaya senegalensis (Meliaceae) gum as co-polymer

2020 ◽  
Vol 6 (1) ◽  
Author(s):  
Chukwuebuka H. Ozoude ◽  
Chukwuemeka P. Azubuike ◽  
Modupe O. Ologunagba ◽  
Sejoro S. Tonuewa ◽  
Cecilia I. Igwilo
Keyword(s):  
Controlled Release ◽  
Sodium Alginate ◽  
Release Kinetics ◽  
Drug Carrier ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Metformin Hydrochloride ◽  
Scanning Calorimetry ◽  
Khaya Senegalensis

Abstract Background Khaya gum is a bark exudate from Khaya senegalensis (Maliaecae) that has drug carrier potential. This study aimed to formulate and comparatively evaluate metformin-loaded microspheres using blends of khaya gum and sodium alginate. Khaya gum was extracted and subjected to preformulation studies using established protocols while three formulations (FA; FB and FC) of metformin (1% w/v)-loaded microspheres were prepared by the ionic gelation method using 5% zinc chloride solution as the cross-linker. The formulations contained 2% w/v blends of khaya gum and sodium alginate in the ratios of 2:3, 9:11, and 1:1, respectively. The microspheres were evaluated by scanning electron microscopy, Fourier transform-infrared spectroscopy, differential scanning calorimetry, entrapment efficiency, swelling index, and in vitro release studies. Results Yield of 28.48%, pH of 4.00 ± 0.05, moisture content (14.59% ± 0.50), and fair flow properties (Carr’s index 23.68 ± 1.91 and Hausner’s ratio 1.31 ± 0.03) of the khaya gum were obtained. FTIR analyses showed no significant interaction between pure metformin hydrochloride with excipients. Discrete spherical microspheres with sizes ranging from 1200 to 1420 μm were obtained. Drug entrapment efficiency of the microspheres ranged from 65.6 to 81.5%. The release of the drug from microspheres was sustained for the 9 h of the study as the cumulative release was 62% (FA), 73% (FB), and 80% (FC). The release kinetics followed Korsmeyer-Peppas model with super case-II transport mechanism. Conclusion Blends of Khaya senegalensis gum and sodium alginate are promising polymer combination for the preparation of controlled-release formulations. The blend of the khaya gum and sodium alginate produced microspheres with controlled release properties. However, the formulation containing 2:3 ratio of khaya gum and sodium alginate respectively produced microspheres with comparable controlled release profiles to the commercial brand metformin tablet.

DESIGN, CHARACTERIZATION AND EVALUATION OF MUCOADHESIVE NASAL IN SITU GELLING FORMULATIONS OF VENLAFAXINE HYDROCHLORIDE FOR BRAIN TARGETTING

INDIAN DRUGS ◽  
2016 ◽  
Vol 53 (01) ◽  
pp. 25-31
Author(s):  
M Priyanka ◽  
◽  
F. S. Dasankoppa ◽  
H. N Sholapur ◽  
NGN Swamy ◽  
...  
Keyword(s):  
Drug Release ◽  
Sodium Alginate ◽  
Linear Regression Analysis ◽  
Entrapment Efficiency ◽  
Stability Study ◽  
Drug Content ◽  
Venlafaxine Hydrochloride ◽  
In Situ Gelling

The poor bioavailability and the therapeutic effectiveness exhibited by the anti-depressant venlafaxine hydrochloride on oral administration is overcome by the use of ion-activated gel forming systems that are instilled as drops; these undergo gelation in the nasal cavity. The present study describes the design, characterization and evaluation of mucoadhesive nasal in situ gelling drug delivery of venlafaxine hydrochloride using different polymers like sodium alginate, HPMC and pectin in various concentrations. DSC studies revealed compatibility of the drug and excipients used. The in situ gels were characterized for physicochemical parameters, gelling ability, rheological studies, drug content, drug entrapment efficiency, in vitro mucoadhesive strength, water holding capacity, gel expansion coefficient and in vitro drug release studies. The amount of polymer blends was optimized using 23 full factorial design. The influence of experimental factors on percentage cumulative drug release at the end of 2 and 8 hours were investigated to get optimized formulation. The responses were analyzed using ANOVA and polynomial equation was generated for each response using multiple linear regression analysis. Optimized formulation, F9, containing 1.98% w/V sodium alginate, 0.64% w/V hydroxylpropyl methylcellulose, 0.99% w/V pectin showed percentage cumulative drug release of 19.33 and 80.44 at the end of 2 and 8 hours, respectively, which were close to the predicted values. The optimized formulation was subjected to stability study for three months at 300C /75% RH. The stability study revealed no significant change in pH, drug content and viscosity. Thus, venlafaxine hydrochloride nasal mucoadhesive in situ gel could be successfully formulated to improve bioavailability and to target the brain.

scholarly journals Release Kinetic Studies of Stevia rebaudiana Extract Capsules from Sodium Alginate and Inulin by Ionotropic Gelation

2018 ◽  
Vol 2018 ◽  
pp. 1-8
Author(s):  
Juan Pablo Quintal Martínez ◽  
Jorge Carlos Ruiz Ruiz ◽  
Maira Rubí Segura Campos
Keyword(s):  
Sodium Alginate ◽  
Release Kinetics ◽  
Stevia Rebaudiana ◽  
Kinetic Studies ◽  
Release Kinetic ◽  
Steviol Glycosides ◽  
Ionotropic Gelation ◽  
Diffusion Controlled ◽  
Release Analysis

This study was oriented towards encapsulation of S. rebaudiana extract and the study of its release kinetics. The desired encapsulation was achieved by the ionotropic gelation method using sodium alginate and inulin of polymeric constituents. Characterization of the capsules was performed by micrometric properties, encapsulation efficiency, in vitro extract release analysis, and biological activity of released extract. The in vitro release profiles from different capsules were applied on different kinetic models. The prepared capsules were found spherical in shape with diameters ranging from 2.07 to 2.63 mm, having the encapsulation efficiencies of 43.77% and 56.53% for phenolic compounds and steviol glycosides, respectively. The best-fit model with the highest correlation coefficient was observed in the Ritger–Peppas model, indicating diffusion controlled principle. The release exponent n value obtained from the Korsmeyer–Peppas model varied between 0.2273 and 1.1719, confirming that the mechanism of S. rebaudiana extract bioactive compounds release was diffusion controlled.

scholarly journals DESIGN AND EVALUATION OF CONTROLLED-RELEASE OCULAR INSERTS OF BRIMONIDINE-TARTRATE AND TIMOLOL MALEATE

2016 ◽  
Vol 9 (1) ◽  
pp. 79 ◽  
Author(s):  
Preethi G. B. ◽  
Prashanth Kunal
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Sodium Alginate ◽  
Calcium Chloride ◽  
Release Kinetics ◽  
Water Soluble ◽  
Moisture Loss ◽  
Timolol Maleate ◽  
Brimonidine Tartrate

<p><strong>Objective: </strong>The current work was attempted to formulate and evaluate a controlled-release matrix-type ocular inserts containing a combination of brimonidine tartrate and timolol maleate, with a view to sustain the drug release in the cul-de-sac of the eye.<strong></strong></p><p><strong>Methods: </strong>Initially, the infrared studies were done to determine the drug–polymer interactions. Sodium alginate-loaded ocuserts were prepared by solvent casting technique. Varying the concentrations of polymer—sodium alginate, plasticizer—glycerine, and cross-linking agent—calcium chloride by keeping the drug concentration constant, made a total of nine formulations. These formulations were evaluated for its appearance, drug content, weight uniformity, thickness uniformity, percentage moisture loss, percentage moisture absorption, and <em>in vitro </em>release profile of the ocuserts. Finally, accelerated stability studies and the release kinetics were performed on the optimised formulation.<strong></strong></p><p><strong>Results: </strong>It was perceived that polymer, plasticizer, and calcium chloride had a significant influence on the drug release. The data obtained from the formulations showed that formulation—F9 was the optimised formulation, which exhibited better drug release. The release data of the optimised formulation tested on the kinetic models revealed that it exhibited first-order release kinetics. <strong></strong></p><p><strong>Conclusion: </strong>It can be concluded that a natural bioadhesive hydrophilic polymer such as sodium alginate can be used as a film former to load water soluble and hydrophilic drugs like brimonidine tartrate and timolol maleate. Among all formulations, F9 with 400 mg sodium alginate, 2% calcium chloride and 60 mg glycerin were found to be the most suitable insert in terms of appearance, ease of handling, thickness, <em>in vitro</em> drug release and stability.</p>

scholarly journals IN SITU GEL AS PLATFORM FOR KETOCONAZOLE SLOW RELEASE DOSAGE FORM

2018 ◽  
Vol 10 (5) ◽  
pp. 76
Author(s):  
Methaq Hamad Sabar ◽  
Iman Sabah Jaafar ◽  
Masar Basim Mohsin Mohamed
Keyword(s):  
Drug Release ◽  
Guar Gum ◽  
Polymer Concentration ◽  
Hydroxypropyl Methylcellulose ◽  
In Vitro Release ◽  
High Viscosity ◽  
In Situ Gel ◽  
Alginate Concentration

Objective: The aim of this study was to formulate ketoconazole (keto) as oral floating in situ gel to slow the release of keto in the stomach.Methods: Sodium alginate (Na alginate) was used as a primary polymer in the preparation of the in situ gel and was supported by the following polymers: guar gum (GG), hydroxypropyl methylcellulose (HPMC) K4M, K15M and carbapol 940 as viscosity enhancing agents. As a consequence, and to complete the gelation process of above formulations was by adding the calcium carbonate (CaCO3). The in situ gels were investigated by the following tests: floating lag time, floating duration, viscosity, drug content, in vitro gelling studies and in vitro release study.Results: The study showed that the faster release was obtained with F1 which contained Na alginate alone. Additionally, reduction in Na alginate concentration resulted in significant increase in drug release. It was also noted that the increase in GG (viscosity enhancing polymer) concentration resulted in non-significant decrease in percent drug release and the reduction in CaCO3 concentration led to significant increase in drug release. Moreover, the release of drug was also affected by grade of viscosity enhancing polymer, the faster release was observed with the formula which contained a polymer of low viscosity (HPMC K4M) and an opposite result was with the high viscosity polymer (HPMCK15M).Conclusion: This study showed the formulation of Na alginate with GG and CaCO3, led to gain floating in situ gel and a sustained release of keto. 

scholarly journals FORMULATION AND EVALUATION OF MUCOADHESIVE MICROSPHERES OF AN ANTI-MIGRAINE DRUG

2018 ◽  
Vol 8 (5) ◽  
pp. 465-474
Author(s):  
S PADMA PRIYA ◽  
AN Rajalakshmi ◽  
P Ilaveni
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Sodium Alginate ◽  
Release Kinetics ◽  
Drug Loading ◽  
Research Work ◽  
Entrapment Efficiency ◽  
Polyvinyl Pyrrolidone ◽  
Anti Migraine Drug

Objective: The objective of this research work is to develop and evaluate mucoadhesive microspheres of an anti-migraine drug for sustained release. Materials and Methods:  Mucoadhesive microspheres were prepared by emulsification method using Sodium alginate (SA), polyvinyl pyrrolidone (PVP) and Chitosan in the various drug-polymer ratios of 1:1, 1:2 and 1:3. Nine  formulations were formulated and  evaluated for  possible drug polymer interactions, percentage yield, micromeritic properties, particle size, drug content, drug entrapment efficiency, drug loading, swelling index, In-vitro wash off test, in vitro  drug release, surface morphology and release kinetics. Results: The results showed that no significant drug polymer interaction in FTIR studies. Among all the formulations SF3 containing sodium alginate showed 77.18% drug release in 6hrs. Conclusion: Amongst the developed mucoadhesive microspheres, SF3 formulation containing sodium alginate exhibited slow and sustained release in a controlled manner and it is a promising formulation for sustained release of Sumatriptan succinate. Keywords: Mucoadhesive microspheres, Sodium alginate, polyvinyl pyrrolidone, Chitosan, sustained release.

A novel rosuvastatin calcium cow ghee fraction biform complex: formulation characterization and evaluation

2021 ◽  
Vol 11 ◽  
Author(s):  
Vijendra Kumar Suryawanshi ◽  
Khomendra Kumar Sarwa ◽  
Suhas Narayan Sakarkar ◽  
Chanchal Deep Kaur
Keyword(s):  
Fatty Acids ◽  
Oral Bioavailability ◽  
Ex Vivo ◽  
Fatty Acid Content ◽  
Lipid Lowering ◽  
Thermal Fractionation ◽  
Ex Vivo Permeation ◽  
Anti Inflammatory ◽  
Rosuvastatin Calcium

Background: Rosuvastatin calcium is a statin class of drug having limited oral bioavailability of about 20%. This problem might be overcome by making the biform complex using cow ghee fraction as a bioavailability enhancer. Methods: A precise thermal fractionation technique was adopted to separate different fatty acids from cow ghee. Collected fractions were subjected to characterization over parameters reported for fatty acids. LC-MS and FTIR confirm the content variation in the collected fraction. Biform complex was prepared by fusion method with a constant ratio of drug and cow ghee fraction. The prepared complex was subjected to FTIR, DSC, and LC-MS study to confirm chemical composition characteristics. Drug content, in-vitro and ex-vivo permeation studies were also performed. The anti-inflammatory response was measured using the carrageenan paw-induced edema rat model. Lipid-lowering effect and inflammation marker analysis was also performed using ELISA specific kit. Results: The biform complex prepared with a thermal fraction at 30ºC of cow ghee show the highest in-vitro and ex-vivo permeation. The anti-inflammation response of the biform complex F1 was higher than other tested formulations with considerable lipid and lipoprotein lowering properties. Conclusions: This study confirms that the thermal fractionation method abled to separate cow ghee as per their fatty acid content. The complexion of rosuvastatin calcium with cow ghee thermal fraction enhances oral bioavailability followed by the anti-inflammatory and lipid-lowering activity.

Sign in / Sign up

Export Citation Format

Share Document