scholarly journals Studying the Optical 3D Accuracy of Intraoral Scans: An In Vitro Study

2020 ◽  
Vol 2020 ◽  
pp. 1-9 ◽  
Author(s):  
Pokpong Amornvit ◽  
Sasiwimol Sanohkan ◽  
Chaimongkon Peampring
Keyword(s):  
High Resolution ◽  
Computer Software ◽  
In Vitro Study ◽  
Reference Points ◽  
Washington Dc ◽  
Scanning Area ◽  
Significant Difference ◽  
Post Hoc ◽  
Digital Caliper

There are various scanners available in dental practice with various accuracies. The aim of this study was to compare the 3D capturing accuracy of scans obtained from Trios 3 and Dental Wings scanner. A reference mandibular model was printed from FormLab with reference points in three axes (X, Y, and XY and Z). The printed model was scanned 5 times with 3 scans: normal scan by Trios 3 (Trios 3A), high-resolution scan by Trios 3 (Trios 3B), and normal scan by Dental Wings. After scan, the stereolithography (stl) files were generated. Then, the measurements were made from the computer software using Rhinoceros 3D (Rhino, Robert McNeel & Associates for Windows, Washington DC, USA). The measurements made with digital caliper were taken as control. Statistical analysis was done using one-way ANOVA with post hoc using Sheffe (P<0.01). Trios 3 presented higher accuracy than Dental Wings and high resolution showed better results. The Dental Wings showed less accuracy at the measurements >50 mm of length and >30 mm in width. There was no significant difference (P>0.05) of control with the Trios 3A and Trios 3B. Similarly, for the measurements in Z-axis, there was no significant difference of control with each scan (Trios 3A, Trios 3B, and Dental Wings). Accuracy of the scan is affected by the length of the scanning area and scanning pattern. It is less recommended to Dental Wings scan >3-unit prosthesis and that crosses the midline.

scholarly journals The Effect of the Bioactive Glass and the Er:YAG Laser on the Remineralization of the Affected Dentin: A Comparative In Vitro Study

2020 ◽  
Vol 11 (2) ◽  
pp. 160-166
Author(s):  
Mohammad Javad Moghaddas ◽  
Horieh Moosavi ◽  
Sara Yaghoubirad ◽  
Nasim Chiniforush
Keyword(s):  
Bioactive Glass ◽  
In Vitro Study ◽  
Control Group ◽  
Dentinal Tubule ◽  
Glass Ionomer ◽  
Significant Difference ◽  
Post Hoc ◽  
Caries Lesions ◽  
Cavity Floor

Introduction: The purpose of this study was to compare the effect of the bioactive glass, the glass ionomer, and the Erbium YAG laser as liners on the remineralization of the affected dentin. Methods: The present study was conducted on 64 healthy extracted human molars divided into 4 groups, 1 control group and 3 experimental groups. After artificially inducing dentinal caries lesions, each of the experimental groups was applied to the cavity floor and then restored with a composite. The samples were stored after thermocycling in an incubator for two months. Finally, the hardness of the cavity floor was measured at 3 depths of 20, 50 and 100 μm by the Vickers microhardness tester. The dentin conditions underneath the liners were also evaluated with FESEM. Statistical analysis was performed by two-way ANOVA and the post-hoc Games-Howell test (P<0.05). Results: Among the groups, the lowest microhardness value was in the control group (P<0.05) except at a depth of 100 μm; therefore, there was no significant difference between the control group and the bioactive glass (P>0.05). The laser group had the highest microhardness value, which was significantly different from the control group (P<0.05). There was a significant difference between the laser and bioactive glass (P<0.05), except at a depth of 20 μm. The laser and glass ionomer had only a significant difference at a depth of 100 μm (P<0.05). The microhardness value induced by glass ionomer was higher than bioactive glass, which in no depth was significant (P>0.05). Partial dentinal tubule occlusion was observed with FESEM in each of the experimental groups as compared to the control group. Conclusion: The microhardness values were higher in all groups than in the control group. The laser might be more successful in remineralization than the other ones.

scholarly journals Reliability analysis of two methods for measuring active enamel demineralization: An in vitro study

2013 ◽  
Vol 07 (02) ◽  
pp. 159-164 ◽  
Author(s):  
Camila Nassur ◽  
Luciana Pomarico ◽  
Lucianne Cople Maia
Keyword(s):  
Image Analysis ◽  
Intraclass Correlation ◽  
In Vitro Study ◽  
Analysis Software ◽  
Computerized Image Analysis ◽  
Enamel Demineralization ◽  
Significant Difference ◽  
Digital Caliper ◽  
Excellent Reproducibility

ABSTRACT Objective: The aim was to evaluate the intra- and inter-examiner reliability of two methods, namely, digital caliper [DC] and computerized image analysis software (Image Tool [IT] version 4.1) for measuring the area of an active enamel demineralization lesion. The effect on that measurement of a window that delimits the lesion was also assessed. Materials and Methods: Thirty-eight circular artificial enamel demineralization lesions (r = 2 mm) were produced on bovine teeth in vitro, which were then measured three times by three examiners, with and without the presence of a window delimiting the area to be measured. The data were analyzed by the intraclass correlation coefficient (ICC) with 95% confidence interval (CI) and by the Altman and Bland analysis. Results: The intra-examiner correlation using the IT method showed excellent reproducibility (mean ICC values 0.922-0.970 with the delimiting window and 0.915-0.990 without the window). However, the intra-examiner correlation using the DC method showed comparatively less reproducibility in the measurements (mean ICC values 0.458-0.648 with the delimiting window and 0.378-0.665 without the window). The inter-examiner correlations showed very good reproducibility of the measurements regardless of the presence or absence of the window for both the DC method (0.811-0.846) and IT method (0.953-0.994). However, the latter method showed less variability within the measurements. Conclusion: However, statistically no significant difference was found between both methodologies. Nevertheless, computerized image analysis with the Image Tool software demonstrated higher intra- and inter-examiner reliability than the digital caliper method, in estimating the area of the enamel demineralization lesion, regardless of the delimiting window.

scholarly journals The Accuracy of Digital Face Scans Obtained from 3D Scanners: An In Vitro Study

2019 ◽  
Vol 16 (24) ◽  
pp. 5061 ◽  
Author(s):  
Pokpong Amornvit ◽  
Sasiwimol Sanohkan
Keyword(s):  
3D Modeling ◽  
In Vitro Study ◽  
Reference Points ◽  
Vitro Study ◽  
Washington Dc ◽  
Practical Applications ◽  
Face Scanning ◽  
Modeling Software ◽  
The Face

Face scanners promise wide applications in medicine and dentistry, including facial recognition, capturing facial emotions, facial cosmetic planning and surgery, and maxillofacial rehabilitation. Higher accuracy improves the quality of the data recorded from the face scanner, which ultimately, will improve the outcome. Although there are various face scanners available on the market, there is no evidence of a suitable face scanner for practical applications. The aim of this in vitro study was to analyze the face scans obtained from four scanners; EinScan Pro (EP), EinScan Pro 2X Plus (EP+) (Shining 3D Tech. Co., Ltd. Hangzhou, China), iPhone X (IPX) (Apple Store, Cupertino, CA, USA), and Planmeca ProMax 3D Mid (PM) (Planmeca USA, Inc. IL, USA), and to compare scans obtained from various scanners with the control (measured from Vernier caliper). This should help to identify the appropriate scanner for face scanning. A master face model was created and printed from polylactic acid using the resolution of 200 microns on x, y, and z axes and designed in Rhinoceros 3D modeling software (Rhino, Robert McNeel and Associates for Windows, Washington DC, USA). The face models were 3D scanned with four scanners, five times, according to the manufacturer’s recommendations; EinScan Pro (Shining 3D Tech. Co., Ltd. Hangzhou, China), EinScan Pro 2X Plus (Shining 3D Tech. Co., Ltd. Hangzhou, China) using Shining Software, iPhone X (Apple Store, Cupertino, CA, USA) using Bellus3D Face Application (Bellus3D, version 1.6.2, Bellus3D, Inc. Campbell, CA, USA), and Planmeca ProMax 3D Mid (PM) (Planmeca USA, Inc. IL, USA). Scan data files were saved as stereolithography (STL) files for the measurements. From the STL files, digital face models are created in the computer using Rhinoceros 3D modeling software (Rhino, Robert McNeel and Associates for Windows, Washington DC, USA). Various measurements were measured five times from the reference points in three axes (x, y, and z) using a digital Vernier caliper (VC) (Mitutoyo 150 mm Digital Caliper, Mitutoyo Co., Kanagawa, Japan), and the mean was calculated, which was used as the control. Measurements were measured on the digital face models of EP, EP+, IPX, and PM using Rhinoceros 3D modeling software (Rhino, Robert McNeel and Associates for Windows, Washington DC, USA). The descriptive statistics were done from SPSS version 20 (IBM Company, Chicago, USA). One-way ANOVA with post hoc using Scheffe was done to analyze the differences between the control and the scans (EP, EP+, IPX, and PM). The significance level was set at p = 0.05. EP+ showed the highest accuracy. EP showed medium accuracy and some lesser accuracy (accurate until 10 mm of length), but IPX and PM showed the least accuracy. EP+ showed accuracy in measuring the 2 mm of depth (diameter 6 mm). All other scanners (EP, IPX, and PM) showed less accuracy in measuring depth. Finally, the accuracy of an optical scan is dependent on the technology used by each scanner. It is recommended to use EP+ for face scanning.

scholarly journals The Effect of Glaze Coating on Wear Resistance of Some Acrylic Denture Teeth: An In Vitro Study

2021 ◽  
Vol 13 (2) ◽  
pp. 47-51
Author(s):  
Samaneh Abbasi ◽  
Soodabe Ebrahimi ◽  
Arash Shisheian ◽  
Maryam Farhadian
Keyword(s):  
Wear Resistance ◽  
In Vitro Study ◽  
Resistance Rate ◽  
Vitro Study ◽  
Wear Rates ◽  
Denture Teeth ◽  
Significant Difference ◽  
The Mean ◽  
Post Hoc

Background: Acrylic resin teeth wear resistance has an important role in the denture longevity. This study aimed to clarify the effect of glaze coating on wear resistance of three types of artificial acrylic teeth. Methods: In this in vitro study, the wear resistance rate of three of acrylic denture teeth (GENIUS, STON and CLASSIC) was compared with Ivoclar teeth (n=25/group). The wear resistance was measured by estimating the weight loss in pre and post removing glaze coating, following 5000 cycles in the chewing simulator device. Data analysis was made using paired t test, one-way ANOVA and Tukey’s post hoc test. Results: ANOVA test showed that there was no significant difference between the mean amount of wear of GENIUS, CLASSIC, STON and IVOCLAR teeth in the first stage (P <0.061), but this difference was significant (P <0.001) in the second stage. The result of Tukey post hoc test showed that wear rates of GENIUS were significantly lower than other groups (P<0.001). Comparison between the mean wear rates of each dental group at the first and second stages showed a significant difference between average teeth wear resistance of CLASSIC, STON and IVOCLAR in the first and second stages (P <0.001). Conclusions: In conclusion, the teeth wear resistance of STON and CLASSIC were similar to IVOCLAR. Also, after removing the glaze coating, the teeth wear resistance decreased in all groups but was not statistically significant for group GENIUS.

scholarly journals Evaluation of Cyclic Fatigue of Hyflex EDM, Twisted Files, and ProTaper Gold Manufactured with Different Processes: An In Vitro Study

2021 ◽  
Vol 2021 ◽  
pp. 1-6
Author(s):  
Pooja D. Khandagale ◽  
Prashant P. Shetty ◽  
Saleem D. Makandar ◽  
Pradeep A. Bapna ◽  
Mohmed Isaqali Karobari ◽  
...  
Keyword(s):  
Fatigue Resistance ◽  
Root Canal ◽  
File Systems ◽  
In Vitro Study ◽  
Cyclic Fatigue ◽  
Segment Length ◽  
Significant Difference ◽  
Number Of Cycles ◽  
Post Hoc

Introduction. The main aims of root canal instrumentation are to provide an environment that will lead to healing and to provide a root canal shape that is comfortable to clean and seal. When working with rotary endodontic instruments, the most significant concerns are that the instrument might fracture in the root canal, thus affecting the treatment outcome. Hence, it is of immense importance to know which file systems have more cyclic fatigue resistance. Methodology. This study evaluated the effect of the curved segment length of the artificial canal (the arch), and the number of cycles necessary in fracture of Hyflex EDM, Twisted files, and ProTaper Gold were recorded. Sixty NiTi rotary instruments of 25 mm length (Hyflex EDM (20), Twisted files (20), and ProTaper Gold (20)) were tested in a metal block with simulated canal having 90° angle of curvature. The study was performed with a specific radius and degree of curvature, i.e., 8 mm radius and 90⁰ angle of curvature, and data obtained were subsequently subjected to statistical evaluation using one-way analysis of variance and Tukey’s post hoc test. Result. The Hyflex EDM (774.29) exhibited the maximum cyclic fatigue resistance compared to Twisted files (654.875) and ProTaper Gold (375.575). A statistically significant difference was observed between the tested groups. Conclusion. The Hyflex EDM files showed the highest cyclic fatigue resistance, followed by Twisted files and ProTaper Gold files.

scholarly journals Estimation of Total Fluoride Concentration, Total Soluble Fluoride Concentration and pH among Various Brands of Toothpastes

2021 ◽  
Author(s):  
Praneetha D Rani ◽  
Vijaya Hegde
Keyword(s):  
Group Analysis ◽  
Fluoride Concentration ◽  
In Vitro Study ◽  
Significant Difference ◽  
The Mean ◽  
The Difference ◽  
Institute Of Technology ◽  
Level Of Significance ◽  
Post Hoc

Introduction: Fluoride toothpastes are a major reason for the decline in dental caries globally. For fluoride toothpaste to be effective, an adequate amount of Total Soluble Fluoride (TSF) must be available in the toothpastes. Aim: To determine and compare the Total Fluoride (TF), TSF and pH among various toothpaste brands. Materials and Methods: An in-vitro study was conducted during October 2019 on 20 toothpaste samples, which belonged to four groups namely, herbal toothpastes group, nonherbal toothpastes group, medicated toothpastes group and kids toothpastes group. Analysis of the samples was done at the Department of Environmental Engineering Laboratory, National Institute of Technology, Surathkal, Karnataka, India. The TF and the TSF concentration was determined using fluoride ion electrode. The pH was determined using pH meter. Statistical analysis was performed using Statistical Package for Social Sciences (SPSS version 19.0). Analysis of variance (ANOVA) was used by Tukey’s post-hoc test to determine the difference between groups. The level of significance was kept at 0.05. Results: The results showed that there was a significant difference between the toothpaste types for mean TF concentration (p=0.004). The post-hoc test showed that there was a significant difference between herbal and nonherbal toothpastes (p=0.041) where the mean TF concentration for nonherbal toothpastes was 1095.20 ppm when compared to herbal toothpastes was 704.40 ppm. The results showed that there was a siginificant difference between the toothpaste types for Mean TSF concentration (p<0.003). There was a significant difference between medicated and kids toothpastes (p=0.024) where the mean total soluble fluoride concentration for medicated toothpastes was 938.60 ppm when compared to the kids toothpastes was 521.20 ppm. Conclusion: The present study showed that pH of all the toothpastes were either neutral or alkaline and the TSF concentration was less when compared to TF concentrations.

scholarly journals Effect of Abutment Geometry and Luting Agents on the Vertical Marginal Discrepancy of Cast Copings on Implant Abutments: An In Vitro Study

2021 ◽  
Vol 2021 ◽  
pp. 1-7
Author(s):  
Jose Rosas ◽  
Frank Mayta-Tovalino ◽  
Violeta Malpartida-Carrillo ◽  
Arnaldo Munive Degregori ◽  
Roman Mendoza ◽  
...  
Keyword(s):  
In Vitro Study ◽  
Reference Points ◽  
Luting Agents ◽  
Luting Agent ◽  
Implant Abutments ◽  
Implant Abutment ◽  
Marginal Discrepancy ◽  
Student’S T ◽  
Post Hoc

Aim. Vertical marginal discrepancy (VMD) influences the success of implant-supported restorations. However, there is little literature that has investigated the influence of geometry and cementing agent on changes in VMD of metal copings on implant abutments. The objective was to evaluate the effect of the geometry of the abutment and cementing agents on VMD. Methods. Cast copings were cemented on implant abutments customized cylindrical (4, 5.5, and 7 mm) and on hexagonal implant abutments (4 mm) cemented or uncemented molded copings were placed (n = 4, totally 64 samples) with different luting agents. The VMD of the copings were measured in the coping-abutment interface at three reference points using a stereomicroscope. The independent Student’s t test was used for comparison between the two different abutment walls. The post hoc statistical analysis was performed by the Tukey test. Results. There was a significant VMD increase between noncemented and cemented cast copings using different luting agents. Abutment geometry and luting agents significantly influenced the VMD p ≤ 0.05 . Cylindrical abutment at 7 mm in height cemented with different luting agent tested showed significantly higher VMD values than cylindrical abutments of 4 mm p = 0.019 . Hexagonal abutments with a 4 mm height showed significantly higher VMD values than cylindrical 4 mm abutments using zinc oxide noneugenol and glass ionomer cements p = 0.032 . Conclusions. Abutment geometry and luting agents influence the VMD of cast copings cemented on implant abutment. The higher the cylindrical abutment, the greater the VMD, and hexagonal wall abutments promote greater marginal gap.

scholarly journals Shaping ability of two heat treated rotary NiTi instruments using different kinematics/in vitro study

2021 ◽  
Vol 45 (1) ◽  
Author(s):  
Engy M. Kataia ◽  
Mohamed Mokhtar Nagy ◽  
Mohamed M. Kataia ◽  
Hala Fayek Khalil
Keyword(s):  
In Vitro Study ◽  
Preparation Time ◽  
Heat Treated ◽  
Significant Difference ◽  
Before And After ◽  
Canal Transportation ◽  
Niti Instruments ◽  
Post Hoc ◽  
Shaping Ability

Abstract Background Comparing shaping ability of Azure and Fanta AF One in rotation and reciprocation. This study was conducted on 40 resin blocks, having canal curvatures 30°-angle and of 16-mm length. The blocks were assigned to 4-groups according to the instrument and motion used: Azure/Rotation (A/Rt), Fanta AF one/Rotation (F/Rt), Azure/Reciprocation (A/Rec) and Fanta AF one/Reciprocation (F/Rec). For both systems single file 25, taper 0.06 were used. Digital images were taken before and after instrumentation. Adobe Photoshop was used to overlap post and pre-instrumentation images to assess canal transportation at 1, 4, 7-mm; representing apical, middle and cervical levels respectively. Stopwatch was used to document the time taken for canal preparation. One-way ANOVA followed by Tukey post hoc test, used to compare between more than two groups in non-related samples. Results At the apical level, no statistically significant difference was found between both files in either rotation or reciprocation. However, reciprocation motion showed significantly lower transportation levels in both files. No significant difference was found among groups at the middle and cervical levels. Regarding preparation time, Reciprocation in both groups was significantly longer. Conclusions The use of reciprocation motion showed minimized apical canal transportation in both files however in longer preparation time.

scholarly journals Comparative evaluation of anti-bacterial efficacy of silver nanoparticle, nanoparticle calcium hydroxide and calcium hydroxide against enterococcus faecalis biofilm- An In vitro study

2018 ◽  
Vol 6 (2) ◽  
pp. 57
Author(s):  
Dr.Abirami V. ◽  
Dr.A.Shafie Ahamed ◽  
Dr.Bhavani S. ◽  
Dr.Rajaraman G.
Keyword(s):  
Silver Nanoparticles ◽  
Calcium Hydroxide ◽  
Enterococcus Faecalis ◽  
Silver Nanoparticle ◽  
In Vitro Study ◽  
P Value ◽  
Antibacterial Efficacy ◽  
Significant Difference ◽  
Post Hoc

The purpose of this study was to evaluate the antibacterial efficacy of silver Nanoparticles, Nanoparticle calcium hydroxide and calcium hydroxide as intracanal medicament against Enterococcus faecalis bio film formed on root dentinThe Minimal inhibitory concentration test and Anti microbial test were conducted for silver nanoparticle, Nanoparticle calcium hydroxide. Teeth were inoculated with E.faecalis strains for 1month to establish a standard mono species bio film model. Biofilm formation is confirmed using SEM. The intracanal medicaments were placed inside the canal and colony forming units (CFU) were counted before and 7 days later the placement of the medicament.MIC for AGNP is 25µg/200µl and for NCH is 12.5µg/200µl. The Antimicrobial test conducted shows zone of inhibition about 11mm and 14mm for AGNP and NCH respectively at 500µg. The calcium hydroxides do not show any antibacterial activity at this concentration. In antibacterial efficacy test using CFU count, the AGNP and NCH shows 75% and 61% of antibacterial efficacy respectively whereas calcium hydroxide has exhibited just 11% of antibacterial efficacy. Silver Nanoparticles and nanoparticle calcium hydroxide had statistically significant difference in the reduction in the number of colonies when compared to calcium hydroxide by post hoc turkey test and p-value of <0.01 was considered as significant in this study.

scholarly journals The Evaluation of apically extruded debris during root canal preparation using Pro-Taper Universal, ProTaper Gold and Reciproc Blue system: An in-vitro comparative Study

2020 ◽  
Vol 6 (2) ◽  
pp. 11-15
Author(s):  
Padma Chandra ◽  
Rajesh Prasad ◽  
Surendra Kumar Mishra ◽  
Jagdish Chandra
Keyword(s):  
File System ◽  
In Vitro Study ◽  
Nickel Titanium ◽  
Root Canal Preparation ◽  
Human Teeth ◽  
Significance Level ◽  
Significant Difference ◽  
Bonferroni Test ◽  
Post Hoc

ABSTRACT Aims & Objectives: The purpose of this study was to compare the amount of apically extruded debris with four nickel-titanium instruments i.e ProTaper Universal, ProTaper Gold, and Reciproc Blue system, Hand K file System. Methods: Eighty extracted single-rooted mandibular premolar human teeth were randomly assigned to 4 groups (n = 20). The canals were instrumented using 1 of the following instruments: ProTaper Universal, ProTaper Gold, and Reciproc Blue system, Hand K file System. Apically extruded debris during instrumentation was collected into preweighed Eppendorf tubes. The weight of the extruded debris was calculated by subtracting the weight of the empty tubes from that of the tubes containing the debris. The data were analyzed statistically using the analysis of variance (ANOVA) and Post-hoc bonferroni test at a significance level of P < .05. Results: All the instrumentation systems resulted in production of extruded debris. The amount of extruded debris was significantly more in Hand K file than PTU, PTG and Reciproc Blue (P<0.05). The PTU system was associated with significantly more extruded debris than the PTG(P=0.041), Reciproc Blue systems (P=`0.011), whereas no significant difference was found in the amount of the debris extruded between PTG and Reciproc Blue (P=0.271). The amount of extruded debris was least in Reciproc Blue in comparison to all used system. Conclusions: Within the limitations of this in vitro study, the amount of apically extruded debris registered for the different files tested was highest for hand file, Protaper Universal, followed by the ProTaper Gold and least in Reciproc Blue.

Sign in / Sign up

Export Citation Format

Share Document