scholarly journals Unconfined Mechanical Properties of Nanoclay Cement Compound Modified Calcareous Sand of the South China Sea

2020 ◽  
Vol 2020 ◽  
pp. 1-16
Author(s):  
Wei Wang ◽  
Jian Li ◽  
Jun Hu
Keyword(s):  
Mechanical Properties ◽  
Deformation Modulus ◽  
Discrete Distribution ◽  
Cement Composite ◽  
Mechanical Tests ◽  
Engineering Properties ◽  
Compressive Property ◽  
Fusion Algorithm ◽  
Calcareous Sand ◽  
Cement Compound

Calcareous sand is characterized by low strength, multiporosity, and high-pressure shrinkage. This often leads to poor engineering properties. Therefore, it is often necessary to reinforce the calcareous sand in order to meet the actual engineering demand for bearing capacity. To study the modification effect of calcareous sand of nanoclay by cement, mechanical tests and microscopic tests of the cement calcareous sand (CCS) modified by different nanoclay content and cement content were conducted. Through the unconfined compressive test, the mechanical properties of nanoclay and cement compound modified calcareous sand (NCCS) were studied. The micromechanism of nanoclay and cement composite modified calcareous sand was analyzed by SEM. Representative curves of data groups of stress and strain data were obtained by the fusion algorithm, which effectively circumvented the discrete distribution of determined data. Test results showed that the following: (1) The compressive property of CCS could be improved by the admixture of nanoclay, and the optimum admixture ratio was 8%. (2) The admixture of nanoclay could enhance the deformation modulus of CCS and improve the resistance of CCS against external load deformation capacity. (3) Nanoclay could increase the density of the internal structure of CCS and improve its mechanical properties.

scholarly journals Effects of Different Types of Fibers on the Physical and Mechanical Properties of MICP-Treated Calcareous Sand

Materials ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 268
Author(s):  
Jitong Zhao ◽  
Huawei Tong ◽  
Yi Shan ◽  
Jie Yuan ◽  
Qiuwang Peng ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Water Absorption ◽  
Glass Fiber ◽  
Physical And Mechanical Properties ◽  
Polyester Fiber ◽  
Engineering Properties ◽  
Fiber Types ◽  
Calcite Precipitation ◽  
Calcareous Sand ◽  
Hemp Fiber

Microbial-induced calcite precipitation (MICP) has been a promising method to improve geotechnical engineering properties through the precipitation of calcium carbonate (CaCO3) on the contact and surface of soil particles in recent years. In the present experiment, water absorption and unconfined compressive strength (UCS) tests were carried out to investigate the effects of three different fiber types (glass fiber, polyester fiber, and hemp fiber) on the physical and mechanical properties of MICP-treated calcareous sand. The fibers used were at 0%, 0.10%, 0.15%, 0.20%, 0.25%, 0.30%, 0.35%, and 0.40% relative to the weight of the sand. The results showed that the failure strain and ductility of the samples could be improved by adding fibers. Compared to biocemented sand (BS), the water absorption of these three fiber-reinforced biocemented sands were, respectively, decreased by 11.60%, 21.18%, and 7.29%. UCS was, respectively, increased by 24.20%, 60.76%, and 6.40%. Polyester fiber produced the best effect, followed by glass fiber and hemp fiber. The optimum contents of glass fiber and polyester fiber were 0.20% and 0.25%, respectively. The optimum content of hemp fiber was within the range of 0.20–0.25%. Light-emitting diode (LED) microscope and scanning electron microscope (SEM) images lead to the conclusion that only a little calcite precipitation had occurred around the hemp fiber, leading to a poor bonding effect compared to the glass and polyester fibers. It was therefore suggested that polyester fiber should be used to improve the properties of biocemented sand.

scholarly journals Triaxial Mechanical Properties and Micromechanism of Calcareous Sand Modified by Nanoclay and Cement

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Wei Wang ◽  
Jian Li ◽  
Jun Hu
Keyword(s):  
Mechanical Properties ◽  
Failure Modes ◽  
Peak Stress ◽  
Cement Composite ◽  
Friction Angle ◽  
Stress And Strain ◽  
Calcareous Sand ◽  
Marine Biological ◽  
Different Content ◽  
The Impact

Calcareous sand is developed by the fracture of marine biological skeleton under the impact of seawater. Calcareous sand is not transported in the process of deposition. Therefore, calcareous sand retains the characteristics of marine biological skeleton, low strength, and porous. In order to study the effect of nanoclay and cement on the modification of calcareous sand, a series of tests were carried out on the modified cement calcareous sand (CCS) with different content of nanoclay. In this study, the triaxial mechanical properties and failure modes of nanoclay and cement composite modified calcareous sand (NCCS) were studied through the triaxial UU test. Then, SEM tests were carried out on CCS and NCCS samples, and the micromechanism of nanoclay and cement composite modified Nanhai calcareous sand was analyzed. The results showed that (1) the shear properties of CCS could be improved by adding nanoclay. The optimum admixture ratio of nanoclay was 8%, and its peak stress was 23%-39% higher than that of CCS. (2) The peak stress and strain of NCCS showed a linear correlation. (3) Compared with CCS, the internal friction angle and cohesion of NCCS were increased by 5.2% and 52%, respectively. (4) Nanoclay could improve the compactness and structure of cement calcareous sand, and the macroscopic performance is the improvement of peak stress and cohesion.

Effect of silver nitrate on some mechanical properties of heat polymerizing acrylic resins

2019 ◽  
Vol 14 (1) ◽  
pp. 110
Author(s):  
Assiss. Prof. Dr. Sabiha Mahdi Mahdi ◽  
Dr. Firas Abd K. Abd K.
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Silver Nitrate ◽  
Surface Hardness ◽  
Mechanical Tests ◽  
Hardness Tester ◽  
Acrylic Resins ◽  
The Difference

Aim: The aimed study was to evaluate the influence of silver nitrate on surfacehardness and tensile strength of acrylic resins.Materials and methods: A total of 60 specimens were made from heat polymerizingresins. Two mechanical tests were utilized (surface hardness and tensile strength)and 4 experimental groups according to the concentration of silver nitrate used.The specimens without the use of silver nitrate were considered as control. Fortensile strength, all specimens were subjected to force till fracture. For surfacehardness, the specimens were tested via a durometer hardness tester. Allspecimens data were analyzed via ANOVA and Tukey tests.Results: The addition of silver nitrate to acrylic resins reduced significantly thetensile strength. Statistically, highly significant differences were found among allgroups (P≤0.001). Also, the difference between control and experimental groupswas highly significant (P≤0.001). For surface hardness, the silver nitrate improvedthe surface hardness of acrylics. Highly significant differences were statisticallyobserved between control and 900 ppm group (P≤0.001); and among all groups(P≤0.001)with exception that no significant differences between control and150ppm; and between 150ppm and 900ppm groups(P>0.05).Conclusion: The addition of silver nitrate to acrylics reduced significantly the tensilestrength and improved slightly the surface hardness.

The Mechanical Properties of Organic Modified Epoxy Resin

2020 ◽  
Vol 43 (3) ◽  
pp. 10-14
Author(s):  
Georgel MIHU ◽  
Claudia Veronica UNGUREANU ◽  
Vasile BRIA ◽  
Marina BUNEA ◽  
Rodica CHIHAI PEȚU ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Epoxy Resin ◽  
Epoxy Matrix ◽  
Epoxy Resins ◽  
Mechanical Tests ◽  
Organic Modification ◽  
Three Point Bending ◽  
Modified Epoxy

Epoxy resins have been presenting a lot of scientific and technical interests and organic modified epoxy resins have recently receiving a great deal of attention. For obtaining the composite materials with good mechanical proprieties, a large variety of organic modification agents were used. For this study gluten and gelatin had been used as modifying agents thinking that their dispersion inside the polymer could increase the polymer biocompatibility. Equal amounts of the proteins were milled together and the obtained compound was used to form 1 to 5% weight ratios organic agents modified epoxy materials. To highlight the effect of these proteins in epoxy matrix mechanical tests as three-point bending and compression were performed.

scholarly journals Generation of Photopolymerized Microparticles Based on PEGDA Using Microfluidic Devices. Part 1. Initial Gelation Time and Mechanical Properties of the Material

Micromachines ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 293
Author(s):  
José M. Acosta-Cuevas ◽  
José González-García ◽  
Mario García-Ramírez ◽  
Víctor H. Pérez-Luna ◽  
Erick Omar Cisneros-López ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Gelation Time ◽  
Mesh Size ◽  
Microfluidic Devices ◽  
Future Generation ◽  
Mechanical Tests ◽  
Continuous Systems ◽  
Polyethylene Glycol Diacrylate ◽  
Glycol Diacrylate ◽  
Close Relationship

Photopolymerized microparticles are made of biocompatible hydrogels like Polyethylene Glycol Diacrylate (PEGDA) by using microfluidic devices are a good option for encapsulation, transport and retention of biological or toxic agents. Due to the different applications of these microparticles, it is important to investigate the formulation and the mechanical properties of the material of which they are made of. Therefore, in the present study, mechanical tests were carried out to determine the swelling, drying, soluble fraction, compression, cross-linking density (Mc) and mesh size (ξ) properties of different hydrogel formulations. Tests provided sufficient data to select the best formulation for the future generation of microparticles using microfluidic devices. The initial gelation times of the hydrogels formulations were estimated for their use in the photopolymerization process inside a microfluidic device. Obtained results showed a close relationship between the amount of PEGDA used in the hydrogel and its mechanical properties as well as its initial gelation time. Consequently, it is of considerable importance to know the mechanical properties of the hydrogels made in this research for their proper manipulation and application. On the other hand, the initial gelation time is crucial in photopolymerizable hydrogels and their use in continuous systems such as microfluidic devices.

scholarly journals Fast Preparation of High-Performance Wood Materials Assisted by Ultrasonic and Vacuum Impregnation

Forests ◽  
2021 ◽  
Vol 12 (5) ◽  
pp. 567
Author(s):  
Hong Yang ◽  
Mingyu Gao ◽  
Jinxin Wang ◽  
Hongbo Mu ◽  
Dawei Qi
Keyword(s):  
Mechanical Properties ◽  
High Performance ◽  
Mechanical Tests ◽  
Vacuum Impregnation ◽  
Natural Forests ◽  
Ultrasonic Pretreatment ◽  
Fast Growing ◽  
Before And After ◽  
New Material ◽  
Ft Ir

In the absence of high-quality hardwood timber resources, we have gradually turned our attention from natural forests to planted fast-growing forests. However, fast-growing tree timber in general has defects such as low wood density, loose texture, and poor mechanical properties. Therefore, improving the performance of wood through efficient and rapid technological processes and increasing the utilization of inferior wood is a good way to extend the use of wood. Densification of wood increases the strength of low-density wood and extends the range of applications for wood and wood-derived products. In this paper, the effects of ultrasonic and vacuum pretreatment on the properties of high-performance wood were explored by combining sonication, vacuum impregnation, chemical softening, and thermomechanical treatments to densify the wood; then, the changes in the chemical composition, microstructure, and mechanical properties of poplar wood before and after treatment were analyzed comparatively by FT-IR, XRD, SEM, and mechanical tests. The results showed that with ultrasonic pretreatment and vacuum impregnation, the compression ratio of high-performance wood reached its highest level and the MOR and MOE reached their maximums. With the help of this method, fast-growing softwoods can be easily prepared into dense wood materials, and it is hoped that this new material can be applied in the fields of construction, aviation, and automobile manufacturing.

Development Of High-Strength Aluminum-Based Alloys By Synthesis Of New Multicomponent Quasicrystals

1998 ◽  
Vol 553 ◽  
Author(s):  
A. Inoue ◽  
H. M. Kimura
Keyword(s):  
Mechanical Properties ◽  
Powder Metallurgy ◽  
Rapid Solidification ◽  
Future Development ◽  
High Strength ◽  
Supercooled Liquid ◽  
Engineering Properties ◽  
Atomic Configuration ◽  
Lanthanide Metal ◽  
Bulk Alloys

AbstractBy the control of composition, clustered atomic configuration and stability of the supercooled liquid in the rapid solidification and powder metallurgy processes, high-strength Al-based bulk alloys containing nanoscale nonperiodic phases were produced in AI-Ln-LTM, AI-ETM-LTM and Al-(V, Cr, Mn)-LTM (Ln=lanthanide metal, LTM=VII and VIII group metals, ETM=IV to VI group metals) alloys containing high Al contents of 92 to 95 at%. The nonperiodic phases are composed of amorphous or icosahedral (I) phase. In particular, the Al-based bulk alloys consisting of nanoscale I particles surrounded by Al phase exhibit much better mechanical properties as compared with commercial Al base alloys. The success of producing the Al-based alloys with good engineering properties by use of I phase is important for future development of I-based alloys as practical materials.

scholarly journals Preparation and properties of silicone rubber materials with foam/solid alternating multilayered structures

2021 ◽  
Author(s):  
Wenhuan Zhang ◽  
Zhaoping Deng ◽  
Hongwei Yuan ◽  
Shikai Luo ◽  
Huayin Wen ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Silicone Rubber ◽  
Cellular Structure ◽  
Cellular Structures ◽  
Compressive Property ◽  
Solid Layer ◽  
Multilayered Structures ◽  
Element Analysis ◽  
Morphology And Mechanical Properties

AbstractIn this paper, silicone rubber materials with foam/solid alternating multilayered structures were successfully constructed by combining the two methods of multilayered hot-pressing and supercritical carbon dioxide (SCCO2) foaming. The cellular morphology and mechanical properties of the foam/solid alternating multilayered silicone rubber materials were systematically studied. The results show that the growth of the cell was restrained by the solid layer, resulting in a decrease in the cell size. In addition, the introduction of the solid layer effectively improved the mechanical properties of the microcellular silicone rubber foam. The tensile strength and compressive strength of the foam/solid alternating multilayered silicone rubber materials reached 5.39 and 1.08 MPa, which are 46.1% and 237.5% of the pure silicone rubber foam, respectively. Finite element analysis (FEA) was applied and the results indicate that the strength and proportion of the solid layer played important roles in the tensile strength of the foam/solid alternating multilayered silicone rubber materials. Moreover, the small cellular structures in silicone rubber foam can provided a high supporting counterforce during compression, meaning that the microcellular structure of silicone rubber foam improved the compressive property compared to that for the large cellular structure of silicone rubber foam.

Mechanical properties and toughening mechanisms of epoxy/graphene nanocomposites

2015 ◽  
Vol 35 (3) ◽  
pp. 257-266 ◽  
Author(s):  
Rahim Eqra ◽  
Kamal Janghorban ◽  
Habib Daneshmanesh
Keyword(s):  
Mechanical Properties ◽  
Fracture Surface ◽  
Flexural Strength ◽  
Young’S Modulus ◽  
Young's Modulus ◽  
Graphene Nanosheets ◽  
Flexural Modulus ◽  
Mechanical Tests ◽  
Toughening Mechanism ◽  
Graphene Nanocomposites

Abstract Because of extraordinary physical, chemical and mechanical properties, graphene nanosheets (GNS) are suitable fillers for optimizing the properties of different polymers. In this research, the effect of GNS content (up to 1 wt.%) on tensile and flexural properties, morphology of fracture surface, and toughening mechanism of epoxy were investigated. Results of mechanical tests showed a peak for tensile and flexural strength of samples with 0.1 wt.% GNS such that the tensile and flexural strength improved by 13% and 3.3%, respectively. The Young’s modulus and flexural modulus increased linearly with GNS content, although the behavior of the Young’s modulus was more remarkable. Morphological investigations confirmed this behavior because the GNS dispersion in the epoxy matrix was uniform at lower contents and agglomerated at higher contents. Finally, microscopical observation showed that the major toughening mechanism of graphene-epoxy nanocomposites was crack path deflection, which changed the mirror fracture surface of the pure epoxy to rough surface.

Sign in / Sign up

Export Citation Format

Share Document