scholarly journals Investigation of the Road Performance of AH-30 Bitumen and Its Mixture: Comparison with AH-70 and SBS-Modified Bitumen

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Chenfeng Chu ◽  
Jing Zhu ◽  
Zi-ang Wang
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Asphalt Pavement ◽  
Asphalt Mixture ◽  
Fatigue Property ◽  
Asphalt Mixtures ◽  
The Road ◽  
Road Performance ◽  
Better Than ◽  
Temperature Crack

AH-30 is a type of high-viscosity matrix asphalt. The asphalt mixture made by AH-30 as a binder has an excellent antirutting performance. However, the other road performance of AH-30 was still worthy of attention. This research aims to reveal the properties of AH-30 and its impact on the road performance of asphalt mixtures (AH30-AC20/25). The AH-70 neat asphalt and SBS modified asphalt were prepared for comparison. The high-temperature sensitivity and fatigue resistance of AH-30 are evaluated by the dynamic shear rheological (DSR) test. The low-temperature performance is evaluated by the bending beam rheometer (BBR) test. The high-temperature stability (HTS) of AH30-AC20/25 is carried out by the wheel tracking (WT) test and the repeated shear constant height (RSCH) test. The low-temperature crack resistance (LTCR) is carried out by the direct stretching (DS) test. The fatigue property is carried out by the three-point bending test. Water stability (WS) is carried out by the Marshall residual stability (MRS) and the intensity ratio of the frozen and melted (IRFM) test. The test results show that the high-temperature resistance of AH-30 is better than that of AH-70. The low-temperature crack resistance of AH-30 is equivalent to that of AH-70. The AH-30 as a binder can meet the requirements of the roads, which are located at a minimum temperature of not less than −10.5°C in winter. The fatigue property of the AH-30 asphalt mixture is poor, which may be one reason why AH-30 asphalt pavement is more prone to cracking. The water stability of the AH30-AC (20/25) asphalt mixture can meet the specification requirements, and AH30-AC20 is better than the other two asphalt mixtures. The research of this paper will provide a basis and reference for the popularization and application of AH-30 in asphalt pavement.

scholarly journals Study on Laboratory Experimental Pavement Performances of SEAM Modified Asphalt Mixture

2019 ◽  
Vol 136 ◽  
pp. 03010
Author(s):  
Ma Qingna ◽  
Zhao Zhiqin ◽  
Xu Qian ◽  
Sun Feng
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
Water Stability ◽  
High Temperature Stability ◽  
Modified Asphalt ◽  
The Road ◽  
Road Performance ◽  
Property Index

Adding sulphur dilution asphalt modifier SEAM to asphalt mixture is not only a modifier of asphalt mixture, but also an additive of asphalt mixture. When the modifier is added into the asphalt mixture, the road performance of the asphalt mixture can be improved. This paper studies SEAM modified asphalt mixture the Marshall property index, temperature stability, Water stability and fatigue feature in the Laboratory. On the based of the result of the experiment and analysis, SEAM can improve the high temperature stability, Water stability and fatigue feature. But the low temperature stability can’t improve.

Research on the Road Performance of the AC-25 Asphalt Mixtures

2012 ◽  
Vol 204-208 ◽  
pp. 1593-1598
Author(s):  
Hong Mei Li ◽  
Wen Fang Liu
Keyword(s):  
Asphalt Pavement ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Central Layer ◽  
The Road ◽  
Road Performance ◽  
On The Road

In this paper, firstly, based on asphalt pavement central layer, the comparison with the foreign related gradation of asphalt mixtures, one typical kinds of gradations are decided; Secondly, the asphalt aggregate ratio is predicted based on professor Lin’s Theory , and five asphalt aggregate ratio are selected. Finally, the road performance of asphalt mixture is experimented, and the road performance of five asphalt aggregate ratio is analyzed. As a result, we can predict the range of the optimum asphalt aggregate ratio based on the road performance.

scholarly journals Feasibility Evaluation of Preparing Asphalt Mixture with Low-Grade Aggregate, Rubber Asphalt and Desulphurization Gypsum Residues

Materials ◽  
2018 ◽  
Vol 11 (8) ◽  
pp. 1481 ◽  
Author(s):  
Xiaoliang Zhang ◽  
Ben Zhang ◽  
Huaxin Chen ◽  
Dongliang Kuang
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Crack Resistance ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
Asphalt Mixtures ◽  
Limestone Powder ◽  
Low Grade ◽  
High Temperature Stability ◽  
Temperature Crack

Road construction consumes great amounts of high-grade natural resources. Using low-grade natural rocks or some solid wastes as substitute materials is a hot topic. Considering this, the feasibility of using low-grade granite aggregate, solid waste-based filler (desulphurization gypsum residues, DGR) and binder (waste tire rubber modified asphalt, RMA) simultaneously in asphalt mixtures has been fully investigated in this research. The commonly used base asphalt and limestone powder (LP) filler were control groups. Material characteristics of raw materials mainly including micro-morphology, functional group, mineral phase, chemical composition and thermal stability were first evaluated in order to recognize them. Four asphalt mixtures (two asphalt binder and two filler) were then designed by standard Superpave method. Finally, a detailed investigation into the pavement performance of asphalt mixtures was carried out. The moisture damage resistance and low-temperature crack resistance were detected by the changing rules of stability, strength and fracture energy, and the high-temperature stability and fatigue performance were determined by wheel tracking test and indirect tensile (IDT) fatigue test, respectively. Results suggested that RMA and DGR both showed positive effects on the low-temperature crack resistance and fatigue property of the granite asphalt mixture. DGR also strengthened moisture stability. The contribution of RMA on high-temperature deformation resistance of the granite asphalt mixture was compelling. It can offset the insufficiency in high-temperature stability made by DGR. A conclusion can be made that asphalt mixture prepared with granite, DGR and RMA possesses satisfactory pavement performances.

scholarly journals Cold In-Place Recycling Asphalt Mixtures: Laboratory Performance and Preliminary M-E Design Analysis

Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2036
Author(s):  
Dongzhao Jin ◽  
Dongdong Ge ◽  
Siyu Chen ◽  
Tiankai Che ◽  
Hongfu Liu ◽  
...  
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Dynamic Modulus ◽  
Asphalt Pavement ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Asphalt Emulsion ◽  
Moisture Susceptibility ◽  
Low Temperature Cracking

Cold in-place recycling (CIR) asphalt mixtures are an attractive eco-friendly method for rehabilitating asphalt pavement. However, the on-site CIR asphalt mixture generally has a high air void because of the moisture content during construction, and the moisture susceptibility is vital for estimating the road service life. Therefore, the main purpose of this research is to characterize the effect of moisture on the high-temperature and low-temperature performance of a CIR asphalt mixture to predict CIR pavement distress based on a mechanistic–empirical (M-E) pavement design. Moisture conditioning was simulated by the moisture-induced stress tester (MIST). The moisture susceptibility performance of the CIR asphalt mixture (pre-mist and post-mist) was estimated by a dynamic modulus test and a disk-shaped compact tension (DCT) test. In addition, the standard solvent extraction test was used to obtain the reclaimed asphalt pavement (RAP) and CIR asphalt. Asphalt binder performance, including higher temperature and medium temperature performance, was evaluated by dynamic shear rheometer (DSR) equipment and low-temperature properties were estimated by the asphalt binder cracking device (ABCD). Then the predicted pavement distresses were estimated based on the pavement M-E design method. The experimental results revealed that (1) DCT and dynamic modulus tests are sensitive to moisture conditioning. The dynamic modulus decreased by 13% to 43% at various temperatures and frequencies, and the low-temperature cracking energy decreased by 20%. (2) RAP asphalt incorporated with asphalt emulsion decreased the high-temperature rutting resistance but improved the low-temperature anti-cracking and the fatigue life. The M-E design results showed that the RAP incorporated with asphalt emulsion reduced the international roughness index (IRI) and AC bottom-up fatigue predictions, while increasing the total rutting and AC rutting predictions. The moisture damage in the CIR pavement layer also did not significantly affect the predicted distress with low traffic volume. In summary, the implementation of CIR technology in the project improved low-temperature cracking and fatigue performance in the asphalt pavement. Meanwhile, the moisture damage of the CIR asphalt mixture accelerated high-temperature rutting and low-temperature cracking, but it may be acceptable when used for low-volume roads.

Improving on Road Asphalt Mixture High Temperature Performance Analysis

2011 ◽  
Vol 374-377 ◽  
pp. 1347-1350
Author(s):  
Feng Chun Zhang
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
High Temperature Stability ◽  
Road Asphalt ◽  
The Road ◽  
Temperature Performance ◽  
Important Significance ◽  
Temperature Crack

according to the road use functions, the article for asphalt mixture of high temperature stability, the low temperature crack performance is analyzed, the results for further study on the asphalt mixture has important significance.

The Analyze Study of Compacting Temperature and Road Performance of Warm Mix Asphalt Mixture (LEADCAP)

2013 ◽  
Vol 361-363 ◽  
pp. 1681-1688 ◽  
Author(s):  
Hai Sheng Zhao ◽  
Wei Chen ◽  
Xiao Yan Wang
Keyword(s):  
Low Temperature ◽  
Dynamic Modulus ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
Organic Additive ◽  
Bending Test ◽  
High Temperature Stability ◽  
The Road ◽  
Indirect Tension ◽  
Road Performance

This paper used one kind of organic additive LEADCAP to reduce the compacting temperature of SBS WMA mixture, and compared the WMA mixture compacted by superpave gyratory compactor (SGC) with HMA mixture to determine the compacting temperature of WMA mixture. Rutting test, low temperature bending test, freeze-thaw indirect tension test, Hamburg Wheel-Track test and dynamic modulus were carried out to evaluate the road performance of WMA mixed with LEASCAP. The test result showed that the WMA mixed with LEADCAP had well performed high temperature stability, low temperature stability, water stability, rutting cracking resistance, and high dynamic modulus, the compacting temperature were 127 °C, and affectively reduced the compacting temperature of SBS WMA mixture.

Influence of Double-Doped Admixtures on Asphalt Mixture Performance

2012 ◽  
Vol 557-559 ◽  
pp. 329-333
Author(s):  
Zhong Run Zheng ◽  
Chao Zhao ◽  
Yi Feng Zhao ◽  
Pei Song
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
High Temperature Stability ◽  
Rutting Resistance ◽  
Splitting Test ◽  
Improvement Effect ◽  
Low Temperature Cracking ◽  
Better Than

This paper introduces an asphalt mixture that mixed with different admixtures, rutting resistance agent and lignin fiber, at the same time. Rutting test and freeze-thaw splitting test are used to analyze rutting resistance on the high temperature and low temperature cracking of the asphalt mixture. The experiments with different mixes material composition are conducted to analysis various properties of the two admixtures on the mixture, especially the high temperature stability, low temperature crack resistance and the law of improvement effect. In addition, the experiments also determine the optimal asphalt content of different type of mixtures. The results showed that the single-doped KTL rutting resistance or lignin fibers have some improvement in water temperature performance of asphalt mixture, stability improvement of double-doped admixture asphalt mixture is better than the single-doped asphalt mixture, such as KTL rutting resistance agents and lignin fibers

Experimental Study on Foamed Asphalt Warm Mix Technology

2014 ◽  
Vol 919-921 ◽  
pp. 1110-1114
Author(s):  
Ying Biao Wu ◽  
Jin Jin Shi ◽  
Chen Fang Yang ◽  
Sheng Xia Song
Keyword(s):  
Evaluation Method ◽  
Asphalt Mixture ◽  
The Road ◽  
Foamed Asphalt ◽  
Outdoor Experiment ◽  
Road Performance ◽  
Cold Recycling ◽  
Lower Temperature ◽  
Specification Requirement ◽  
Better Than

Usually, foamed asphalt as cold recycling mixture binder, study on foamed asphalt warm mix technology was limited in China. Aimed at the asphalt foaming characteristic, the paper put forward the best asphalt foaming condition and carried out indoor and outdoor experiment to study the road performance of warm mixed asphalt mixture. The paper proposed the maturation curing time concept and its evaluation method. Results indicated that the warm mixed asphalt mixtures road performance can meet the HMA specification requirement in a lower temperature of construction, and low-temperature crack resistance was better than the tradition hot mix asphalt mixture so the warm mix foamed mixture has a remarkable economic and society benefit.

scholarly journals Laboratory Investigation of Carbon Black/Bio-Oil Composite Modified Asphalt

Materials ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 4910
Author(s):  
Ping Zhang ◽  
Lan Ouyang ◽  
Lvzhen Yang ◽  
Yi Yang ◽  
Guofeng Lu ◽  
...  
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Carbon Black ◽  
Influencing Factors ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Test Results ◽  
Modified Asphalt ◽  
Temperature Performance ◽  
Bio Oil

As environmentally friendly materials, carbon black and bio-oil can be used as modifiers to effectively enhance the poor high-temperature and low-temperature performance of base asphalt and its mixture. Different carbon black and bio-oil contents and shear time were selected as the test influencing factors in this work. Based on the Box–Behnken design (BBD), carbon black/bio-oil composite modified asphalt was prepared to perform the softening point, penetration, multiple stress creep and recovery (MSCR), and bending beam rheometer (BBR) tests. The response surface method (RSM) was used to analyze the test results. In addition, the base asphalt mixtures and the optimal performance carbon black/bio-oil composite modified asphalt mixtures were formed for rutting and low-temperature splitting tests. The results show that incorporating carbon black can enhance the asphalt’s high-temperature performance by the test results of irrecoverable creep compliance (Jnr) and strain recovery rate (R). By contrast, the stiffness modulus (S) and creep rate (M) test results show that bio-oil can enhance the asphalt’s low-temperature performance. The quadratic function models between the performance indicators of carbon black/bio-oil composite modified asphalt and the test influencing factors were established based on the RSM. The optimal performance modified asphalt mixture’s carbon black and bio-oil content was 15.05% and 9.631%, and the shear time was 62.667 min. It was revealed that the high-temperature stability and low-temperature crack resistance of the carbon black/bio-oil composite modified asphalt mixture were better than that of the base asphalt mixture because of its higher dynamic stability (DS) and toughness. Therefore, carbon black/bio-oil composite modified asphalt mixture can be used as a new type of choice for road construction materials, which is in line with green development.

scholarly journals A New Type of Crumb Rubber Asphalt Mixture: A Dry Process Design and Performance Evaluation

2020 ◽  
Vol 10 (1) ◽  
pp. 372
Author(s):  
Feng Ma ◽  
Jiasheng Dai ◽  
Zhen Fu ◽  
Jenny Liu ◽  
Wenhao Dong ◽  
...  
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Asphalt Mixture ◽  
Crumb Rubber ◽  
Volume Replacement ◽  
Dry Process ◽  
Temperature Performance ◽  
New Type ◽  
Substitution Ratio ◽  
Road Performance

To obtain a crumb rubber asphalt mixture with excellent performance, this study combined trans-polyoctenamer rubber (TOR), crumb rubber, and other additives to establish a new type of crumb rubber (CRT). The objective of this study was to design and evaluate the road performance of the new type of crumb rubber asphalt mixture (CRTAM) with a skeleton dense texture through a dry process. First, the skeleton intrusion compact volume method was used to optimize the grading of coarse and fine aggregates, and the design of the CRTAM gradation was carried out through the same and unequal volume replacement grading method. Then, three types of road performance were analyzed: high-temperature stability, low-temperature crack resistance, and water stability. The results showed that 2% and 2.5% CRT met a low-temperature index with equal volume substitution, and the six gradations obtained by unequal volume replacement with 2% CRT complied with the requirements of a skeleton dense texture. When the substitution ratio was 1.5 and 0.5, the high-temperature performance was better. In addition, when the substitution ratio was 0.5, the flexural strain energy density was the highest and the low-temperature performance was the best. Including considerations of economic benefits, it is recommended that the CRT content be 2% and the substitution ratio be 0.5.

Sign in / Sign up

Export Citation Format

Share Document