scholarly journals A Novel Data-Driven Model for Dynamic Prediction and Optimization of Profile Control in Multilayer Reservoirs

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Wei Liu ◽  
Hui Zhao ◽  
Xun Zhong ◽  
Guanglong Sheng ◽  
Meilong Fu ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Parameter Optimization ◽  
Water Injection ◽  
Material Balance ◽  
Data Driven ◽  
Production Data ◽  
Daily Production ◽  
Injection Efficiency ◽  
Profile Control ◽  
Actual Field

Establishing reservoir numerical simulation and profile control optimization methods considering the mechanism of profile control has always been a difficult research problem at home and abroad. In this paper, firstly, a physics-based data-driven model was established on daily production data of injection and production wells following the principle of material balance. Key parameters including transmissibility, control pore volume, water injection allocation factors, and injection efficiency are derived directly from history matched model, and the dominated flow channels could be quantitatively identified. Then, combined with the evaluation results of the plugging ability of the plugging agent, imaginary well nodes are added to the existing interwell relationship to characterize the heterogeneity of interwell-specific parameters. This process performs flow processing along the interwell control units, forming a new and rapid method for simulation and prediction. Lastly, based on the calculated interwell transmissibility, water injection efficiency, and allocation factors, injection wells with low water injection efficiency can be preferentially selected as profile control wells. In addition, taking the production rates, injection rates, and the amount of plugging agent as optimization variables, we established an optimal control mathematical model and realized the parameter optimization method of the profile control. We demonstrated the results of one conceptual model and two indoor experiments to verify the feasibility of the proposed method and completed two actual field applications. Model validation and actual field application show that the proposed method successfully eliminates the complicated geological modeling procedure and the tedious calculation process associated with the profile control treatment in traditional numerical simulation methods. The calculation speed improves tens or hundreds of times, and water channeling paths are accurately identified. Most importantly, this method realizes the overall decision-making of profile control well selection, dynamic production prediction, and parameter optimization of profile control measures quickly and accurately by mainly using the daily production data of wells. The findings of this study can help for better understanding of the optimization design and application of on-site profile control schemes in large-scale oilfields.

A Simple Method for Quantifying Inter-Well Communication Using Production Data from Single-Phase Shale Gas Reservoirs

2021 ◽  
Author(s):  
Hamidreza Hamdi ◽  
Hamid Behmanesh ◽  
Christopher R. Clarkson
Keyword(s):  
Numerical Simulation ◽  
Shale Gas ◽  
Analytical Method ◽  
Single Phase ◽  
Material Balance ◽  
Production Data ◽  
Hydraulic Fractures ◽  
Gas Reservoirs ◽  
Simple Method ◽  
Shale Gas Reservoirs

Abstract Hydraulic fracture/reservoir properties and fluid-in-place can be quantified by using rate-transient analysis (RTA) techniques applied to flow rates/pressures gathered from multi-fractured horizontal wells (MFHWs) completed in unconventional reservoirs. These methods are commonly developed for the analysis of production data from single wells without considering communication with nearby wells. However, in practice, wells drilled from the same pad can be in strong hydraulic communication with each other. This study aims to develop the theoretical basis for analyzing production data from communicating MFHWs completed in single-phase shale gas reservoirs. A simple and practical semi-analytical method is developed to quantify the communication between wells drilled from the same pad by analyzing online production data from the individual wells. This method is based on the communicating tanks model and employs the concepts of macroscopic material balance and the succession of pseudo-steady states. A set of nonlinear ordinary differential equations (ODEs) are generated and solved simultaneously using the efficient Adams-Bashforth-Moulton algorithm. The accuracy of the solutions is verified against robust numerical simulation. In the first example provided, a MFHW well-pair is presented where the wells are communicating through primary hydraulic fractures with different communication strengths. In the subsequent examples, the method is extended to consider production data from a three-well and a six-well pad with wine-rack-style completions. The developed model is flexible enough to account for asynchronous wells that are producing from distinct reservoir blocks with different fracture/rock properties. For all the studied cases, the semi-analytical method closely reproduces the results of fully numerical simulation. The results demonstrate that, in some cases, when new wells start to produce, the production rates of existing wells can drop significantly. The amount of productivity loss is a direct function of the communication strengths between the wells. The new method can accurately quantify the communication strength between wells through transmissibility multipliers between the hydraulic fractures that are adjusted to match individual well production data. In this study, a new simple and efficient semi-analytical method is presented that can be used to analyze online production data from multiple wells drilled from a pad simultaneously with minimal computation time. The main advantage of the developed method is its scalability, where additional wells can be added to the system very easily.

A Practical Model for Water Injection Evaluation and Optimization in Typical Offshore Reservoirs Considering Formation Heterogeneity Based on Experimental Study

2021 ◽  
Author(s):  
Shijun Huang ◽  
Yuanrui Zhu ◽  
Shichao Chai ◽  
Guanyang Ding ◽  
Yicheng Xin ◽  
...  
Keyword(s):  
Horizontal Well ◽  
Superposition Principle ◽  
Water Injection ◽  
Injection Rate ◽  
Rate Curve ◽  
Control Effect ◽  
Injection Efficiency ◽  
Profile Control ◽  
Horizontal Wellbore ◽  
Heterogeneous Formation

Abstract A major concern with water injection in offshore oil reservoir is the water breakthrough. The formation heterogeneity is the main reason for it. In order to evaluate the water injection efficiency, a visualized 2-D experiment was carried out to obtain the distribution law of injected water and the variation of injection parameters in homogeneous and heterogeneous formation. In addition, a coupled wellbore/reservoir model was established by applying microelement method, superposition principle and imaging. This model considers the formation heterogeneity and pressure drop caused by wellbore friction. The visualized 2-D sand filling displacement experiment indicates that the injection rate at the horizontal well heel is greater than that at the toe and the injection front is more irregular in heterogeneous formation. The injection rate and injection pressure distribution along the horizontal well are obtained analytically based on the proposed model, the results show that the injection rate at the two sides of the wellbore is much higher than that in the middle when the formation is homogeneous and the wellbore is infinite-conductive. In this case, the injection rate curve along horizontal well shows a "U" shaped distribution. When a finite-conductive horizontal wellbore is considered, the injection rate at the heel of the wellbore is higher than that of the toe, although the injection rate curve along horizontal well also exhibits a deformed "U" shape distribution. For the formation heterogeneities along the horizontal wellbore, the injection rate distribution curve is not continuous anymore, but a deformed "U" shape is also observed for each wellbore segment. At last, the established model was applied to an ultra-heterogeneous offshore reservoir. It is concluded that the profile control effect of typical well is obvious. The results of this study are of great significance for the calculation of the injection rate profile and improving the water injection efficiency.

scholarly journals Data-Driven Dispatching Rules Mining and Real-Time Decision-Making Methodology in Intelligent Manufacturing Shop Floor with Uncertainty

Sensors ◽  
2021 ◽  
Vol 21 (14) ◽  
pp. 4836
Author(s):  
Liping Zhang ◽  
Yifan Hu ◽  
Qiuhua Tang ◽  
Jie Li ◽  
Zhixiong Li
Keyword(s):  
Decision Making ◽  
Data Base ◽  
Real Time ◽  
Manufacturing Industry ◽  
Job Shop ◽  
Data Driven ◽  
Dispatching Rules ◽  
Shop Floor ◽  
Production Data ◽  
Online Decision Making

In modern manufacturing industry, the methods supporting real-time decision-making are the urgent requirement to response the uncertainty and complexity in intelligent production process. In this paper, a novel closed-loop scheduling framework is proposed to achieve real-time decision making by calling the appropriate data-driven dispatching rules at each rescheduling point. This framework contains four parts: offline training, online decision-making, data base and rules base. In the offline training part, the potential and appropriate dispatching rules with managers’ expectations are explored successfully by an improved gene expression program (IGEP) from the historical production data, not just the available or predictable information of the shop floor. In the online decision-making part, the intelligent shop floor will implement the scheduling scheme which is scheduled by the appropriate dispatching rules from rules base and store the production data into the data base. This approach is evaluated in a scenario of the intelligent job shop with random jobs arrival. Numerical experiments demonstrate that the proposed method outperformed the existing well-known single and combination dispatching rules or the discovered dispatching rules via metaheuristic algorithm in term of makespan, total flow time and tardiness.

scholarly journals A Data-Driven Surrogate Approach for the Temporal Stability Forecasting of Vegetation Covered Dikes

Water ◽  
2021 ◽  
Vol 13 (1) ◽  
pp. 107
Author(s):  
Elahe Jamalinia ◽  
Faraz S. Tehrani ◽  
Susan C. Steele-Dunne ◽  
Philip J. Vardon
Keyword(s):  
Numerical Simulation ◽  
Water Flux ◽  
Temporal Stability ◽  
Synthetic Data ◽  
Climatic Conditions ◽  
Training Data ◽  
Data Driven ◽  
Data Set ◽  
Surface Cracking ◽  
Real Time Analysis

Climatic conditions and vegetation cover influence water flux in a dike, and potentially the dike stability. A comprehensive numerical simulation is computationally too expensive to be used for the near real-time analysis of a dike network. Therefore, this study investigates a random forest (RF) regressor to build a data-driven surrogate for a numerical model to forecast the temporal macro-stability of dikes. To that end, daily inputs and outputs of a ten-year coupled numerical simulation of an idealised dike (2009–2019) are used to create a synthetic data set, comprising features that can be observed from a dike surface, with the calculated factor of safety (FoS) as the target variable. The data set before 2018 is split into training and testing sets to build and train the RF. The predicted FoS is strongly correlated with the numerical FoS for data that belong to the test set (before 2018). However, the trained model shows lower performance for data in the evaluation set (after 2018) if further surface cracking occurs. This proof-of-concept shows that a data-driven surrogate can be used to determine dike stability for conditions similar to the training data, which could be used to identify vulnerable locations in a dike network for further examination.

scholarly journals Numerical Simulation and Engineering Application of Coalbed Water Injection

2019 ◽  
Vol 2019 ◽  
pp. 1-12 ◽  
Author(s):  
Yijie Shi ◽  
Pengfei Wang ◽  
Ronghua Liu ◽  
Xuanhao Tan ◽  
Wen Zhang
Keyword(s):  
Numerical Simulation ◽  
Process Parameters ◽  
Water Injection ◽  
Engineering Application ◽  
Working Environment ◽  
Engineering Practice ◽  
Characteristic Parameters ◽  
Injection Process ◽  
Working Face ◽  
Dust Reduction

Coalbed water injection is the most basic and effective dust-proof technology in the coal mining face. To understand the influence of coalbed water injection process parameters and coalbed characteristic parameters on coal wetting radius, this paper uses Fluent computational fluid dynamics software to systematically study the seepage process of coalbed water injection under different process parameters and coalbed characteristic parameters, calculation results of which are applied to engineering practice. The results show that the numerical simulation can help to predict the wetness range of coalbed water injection, and the results can provide guidance for the onsite design of coalbed water injection process parameters. The effect of dust reduction applied to onsite coalbed water injection is significant, with the average dust reduction rates during coal cutting and support moving being 67.85% and 46.07%, respectively, which effectively reduces the dust concentration on the working face and improves the working environment.

Diagnostic Plots for Production Decline During the Transition of Oil Field Development From Depletion to Water Injection

2021 ◽  
Author(s):  
Vil Syrtlanov ◽  
Yury Golovatskiy ◽  
Ivan Ishimov
Keyword(s):  
Water Injection ◽  
Simulation Models ◽  
Oil Field ◽  
Production Data ◽  
Oil Reservoir ◽  
Field Development ◽  
Well Production ◽  
Diagnostic Plots ◽  
Oil Field Development ◽  
Analytical Approaches

Abstract In this paper the simplified way is proposed for predicting the dynamics of liquid production and estimating the parameters of the oil reservoir using diagnostic curves, which are a generalization of analytical approaches, partially compared with the results of calculations on 3D simulation models and with actual well production data.

Sign in / Sign up

Export Citation Format

Share Document