scholarly journals A Multipulse Radar Signal Recognition Approach via HRF-Net Deep Learning Models

2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Ji Li ◽  
Huiqiang Zhang ◽  
Jianping Ou ◽  
Wei Wang
Keyword(s):  
Deep Learning ◽  
Feature Fusion ◽  
Signal To Noise Ratio ◽  
Software Radio ◽  
Radar Signal ◽  
Time Frequency ◽  
Recognition Result ◽  
Electronic Countermeasure ◽  
Radar Signals ◽  
Deep Learning Model

In the field of electronic countermeasure, the recognition of radar signals is extremely important. This paper uses GNU Radio and Universal Software Radio Peripherals to generate 10 classes of close-to-real multipulse radar signals, namely, Barker, Chaotic, EQFM, Frank, FSK, LFM, LOFM, OFDM, P1, and P2. In order to obtain the time-frequency image (TFI) of the multipulse radar signal, the signal is Choi–Williams distribution (CWD) transformed. Aiming at the features of the multipulse radar signal TFI, we designed a distinguishing feature fusion extraction module (DFFE) and proposed a new HRF-Net deep learning model based on this module. The model has relatively few parameters and calculations. The experiments were carried out at the signal-to-noise ratio (SNR) of −14 ∼ 4 dB. In the case of −6 dB, the recognition result of HRF-Net reached 99.583% and the recognition result of the network still reached 97.500% under −14 dB. Compared with other methods, HRF-Nets have relatively better generalization and robustness.

scholarly journals A Radar Signal Recognition Approach via IIF-Net Deep Learning Models

2020 ◽  
Vol 2020 ◽  
pp. 1-8
Author(s):  
Ji Li ◽  
Huiqiang Zhang ◽  
Jianping Ou ◽  
Wei Wang
Keyword(s):  
Recognition Accuracy ◽  
Signal To Noise Ratio ◽  
Recognition Rate ◽  
Software Radio ◽  
Radar Signal ◽  
Signal Recognition ◽  
Electromagnetic Environment ◽  
Time Frequency ◽  
Low Snr ◽  
Radar Signals

In the increasingly complex electromagnetic environment of modern battlefields, how to quickly and accurately identify radar signals is a hotspot in the field of electronic countermeasures. In this paper, USRP N210, USRP-LW N210, and other general software radio peripherals are used to simulate the transmitting and receiving process of radar signals, and a total of 8 radar signals, namely, Barker, Frank, chaotic, P1, P2, P3, P4, and OFDM, are produced. The signal obtains time-frequency images (TFIs) through the Choi–Williams distribution function (CWD). According to the characteristics of the radar signal TFI, a global feature balance extraction module (GFBE) is designed. Then, a new IIF-Net convolutional neural network with fewer network parameters and less computation cost has been proposed. The signal-to-noise ratio (SNR) range is −10 to 6 dB in the experiments. The experiments show that when the SNR is higher than −2 dB, the signal recognition rate of IIF-Net is as high as 99.74%, and the signal recognition accuracy is still 92.36% when the SNR is −10 dB. Compared with other methods, IIF-Net has higher recognition rate and better robustness under low SNR.

scholarly journals Detection of Polyphase Codes Radar Signals in Low SNR

2016 ◽  
Vol 2016 ◽  
pp. 1-6 ◽  
Author(s):  
Runlan Tian ◽  
Guoyi Zhang ◽  
Rui Zhou ◽  
Wei Dong
Keyword(s):  
Hough Transform ◽  
Signal To Noise Ratio ◽  
Superior Performance ◽  
Radar Signal ◽  
Time Frequency ◽  
Low Snr ◽  
Radar Signals ◽  
Core Idea ◽  
Code Type ◽  
Electronic Intelligence

A novel effective detection method is proposed for electronic intelligence (ELINT) systems detecting polyphase codes radar signal in the low signal-to-noise ratio (SNR) scenario. The core idea of the proposed method is first to calculate the time-frequency distribution of polyphase codes radar signals via Wigner-Ville distribution (WVD); then the modified Hough transform (HT) is employed to cumulate all the energy of WVD’s ridges effectively to achieve signal detection. Compared with the generalised Wigner Hough transform (GWHT) method, the proposed method has a superior performance in low SNR and is not sensitive to the code type. Simulation results verify the validity of the proposed method.

scholarly journals Marine Distributed Radar Signal Identification and Classification Based on Deep Learning

2021 ◽  
Vol 38 (5) ◽  
pp. 1541-1548
Author(s):  
Chang Liu ◽  
Ruslan Antypenko ◽  
Iryna Sushko ◽  
Oksana Zakharchenko ◽  
Ji Wang
Keyword(s):  
Neural Network ◽  
Deep Learning ◽  
Frequency Domain ◽  
Detection Algorithm ◽  
Radar Signal ◽  
Signal Identification ◽  
Time Frequency ◽  
Weight Calculation ◽  
Radar Signals ◽  
Frequency Features

Distributed radar is applied extensively in marine environment monitoring. In the early days, the radar signals are identified inefficiently by operators. It is promising to replace manual radar signal identification with machine learning technique. However, the existing deep learning neural networks for radar signal identification consume a long time, owing to autonomous learning. Besides, the training of such networks requires lots of reliable time-frequency features of radar signals. This paper mainly analyzes the identification and classification of marine distributed radar signals with an improved deep neural network. Firstly, the time frequency features were extracted from signals based on short-time Fourier transform (STFT) theory. Then, a target detection algorithm was proposed, which weighs and fuses the heterogenous marine distributed radar signals, and four methods were provided for weight calculation. After that, the frequency-domain priori model feature assistive training was introduced to train the traditional deep convolutional neural network (DCNN), producing a CNN with feature splicing operation. The features of time- and frequency-domain signals were combined, laying the basis for radar signal classification. Our model was proved effective through experiments.

scholarly journals Estimating the Instantaneous Frequency of Linear and Nonlinear Frequency Modulated Radar Signals—A Comparative Study

Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2840
Author(s):  
Hubert Milczarek ◽  
Czesław Leśnik ◽  
Igor Djurović ◽  
Adam Kawalec
Keyword(s):  
Instantaneous Frequency ◽  
Early Warning Systems ◽  
Vital Role ◽  
Estimation Methods ◽  
Radar Signal ◽  
Nonlinear Frequency ◽  
Modulation Recognition ◽  
Electronic Warfare ◽  
Time Frequency ◽  
Radar Signals

Automatic modulation recognition plays a vital role in electronic warfare. Modern electronic intelligence and electronic support measures systems are able to automatically distinguish the modulation type of an intercepted radar signal by means of real-time intra-pulse analysis. This extra information can facilitate deinterleaving process as well as be utilized in early warning systems or give better insight into the performance of hostile radars. Existing modulation recognition algorithms usually extract signal features from one of the rudimentary waveform characteristics, namely instantaneous frequency (IF). Currently, there are a small number of studies concerning IF estimation methods, specifically for radar signals, whereas estimator accuracy may adversely affect the performance of the whole classification process. In this paper, five popular methods of evaluating the IF–law of frequency modulated radar signals are compared. The considered algorithms incorporate the two most prevalent estimation techniques, i.e., phase finite differences and time-frequency representations. The novel approach based on the generalized quasi-maximum likelihood (QML) method is also proposed. The results of simulation experiments show that the proposed QML estimator is significantly more accurate than the other considered techniques. Furthermore, for the first time in the publicly available literature, multipath influence on IF estimates has been investigated.

scholarly journals EEG Emotion Classification Using an Improved SincNet-Based Deep Learning Model

2019 ◽  
Vol 9 (11) ◽  
pp. 326 ◽  
Author(s):  
Hong Zeng ◽  
Zhenhua Wu ◽  
Jiaming Zhang ◽  
Chen Yang ◽  
Hua Zhang ◽  
...  
Keyword(s):  
Deep Learning ◽  
Speaker Recognition ◽  
Classification Accuracy ◽  
Deep Neural Network ◽  
Signal To Noise Ratio ◽  
Single Subject ◽  
Emotion Classification ◽  
Eeg Signals ◽  
Electroencephalogram Eeg ◽  
Deep Learning Model

Deep learning (DL) methods have been used increasingly widely, such as in the fields of speech and image recognition. However, how to design an appropriate DL model to accurately and efficiently classify electroencephalogram (EEG) signals is still a challenge, mainly because EEG signals are characterized by significant differences between two different subjects or vary over time within a single subject, non-stability, strong randomness, low signal-to-noise ratio. SincNet is an efficient classifier for speaker recognition, but it has some drawbacks in dealing with EEG signals classification. In this paper, we improve and propose a SincNet-based classifier, SincNet-R, which consists of three convolutional layers, and three deep neural network (DNN) layers. We then make use of SincNet-R to test the classification accuracy and robustness by emotional EEG signals. The comparable results with original SincNet model and other traditional classifiers such as CNN, LSTM and SVM, show that our proposed SincNet-R model has higher classification accuracy and better algorithm robustness.

scholarly journals Explicit-implicit dual stream network for image quality assessment

2020 ◽  
Vol 2020 (1) ◽  
Author(s):  
Guangyi Yang ◽  
Xingyu Ding ◽  
Tian Huang ◽  
Kun Cheng ◽  
Weizheng Jin
Keyword(s):  
Deep Learning ◽  
Image Quality ◽  
Quality Assessment ◽  
Frequency Domain ◽  
Image Quality Assessment ◽  
Feature Fusion ◽  
Learning Model ◽  
Stream Network ◽  
Perception System ◽  
Deep Learning Model

Abstract Communications industry has remarkably changed with the development of fifth-generation cellular networks. Image, as an indispensable component of communication, has attracted wide attention. Thus, finding a suitable approach to assess image quality is important. Therefore, we propose a deep learning model for image quality assessment (IQA) based on explicit-implicit dual stream network. We use frequency domain features of kurtosis based on wavelet transform to represent explicit features and spatial features extracted by convolutional neural network (CNN) to represent implicit features. Thus, we constructed an explicit-implicit (EI) parallel deep learning model, namely, EI-IQA model. The EI-IQA model is based on the VGGNet that extracts the spatial domain features. On this basis, the number of network layers of VGGNet is reduced by adding the parallel wavelet kurtosis value frequency domain features. Thus, the training parameters and the sample requirements decline. We verified, by cross-validation of different databases, that the wavelet kurtosis feature fusion method based on deep learning has a more complete feature extraction effect and a better generalisation ability. Thus, the method can simulate the human visual perception system better, and subjective feelings become closer to the human eye. The source code about the proposed EI-IQA model is available on github https://github.com/jacob6/EI-IQA.

scholarly journals Research on Robustness of Related Images for Power Equipment Inspection

2021 ◽  
Vol 2113 (1) ◽  
pp. 012045
Author(s):  
Chunlei Zhou ◽  
Xiangzhou Chen ◽  
Wenli Liu ◽  
Tianyu Dong ◽  
Huang Yun
Keyword(s):  
Deep Learning ◽  
Image Recognition ◽  
Feature Fusion ◽  
Power Equipment ◽  
Actual Measurement ◽  
Practical Applications ◽  
Detection Algorithms ◽  
Traction Substations ◽  
Deep Learning Model ◽  
Selection Of

Abstract With the increase in the number of traction substations year by year, manual inspections are gradually being replaced by unattended inspections. Target detection algorithms based on deep learning are more widely used in intelligent inspections of power equipment. However, in practical applications, it is found that due to the small target to be detected, the accuracy of the deep learning model will decrease when the shooting angle is inclined and the light conditions are poor. This is because the algorithm’s robustness is low, and the detection ability of the model will be seriously affected when the angle or illumination difference with the sample is large. Based on this, the feature fusion part of the YOLOv3 algorithm and the selection of the loss function and the size of the anchor frame are improved, and the improved ASFF fusion method is used to classify various images in the power equipment. Actual measurement and repeated experiments show that the proposed method can be effectively applied to image recognition of various power equipment, optimize robustness, and greatly improve the image recognition efficiency of power equipment.

scholarly journals LPI Radar Waveform Recognition Based on CNN and TPOT

Symmetry ◽  
2019 ◽  
Vol 11 (5) ◽  
pp. 725 ◽  
Author(s):  
Jian Wan ◽  
Xin Yu ◽  
Qiang Guo
Keyword(s):  
Signal To Noise Ratio ◽  
Recognition Rate ◽  
Recognition System ◽  
Radar Signal ◽  
Automatic Identification ◽  
Identification System ◽  
Electronic Warfare ◽  
Time Frequency ◽  
Barker Codes ◽  
Intelligence Support

The electronic reconnaissance system is the operational guarantee and premise of electronic warfare. It is an important tool for intercepting radar signals and providing intelligence support for sensing the battlefield situation. In this paper, a radar waveform automatic identification system for detecting, tracking and locating low probability interception (LPI) radar is studied. The recognition system can recognize 12 different radar waveform: binary phase shift keying (Barker codes modulation), linear frequency modulation (LFM), Costas codes, polytime codes (T1, T2, T3, and T4), and polyphase codes (comprising Frank, P1, P2, P3 and P4). First, the system performs time–frequency transform on the LPI radar signal to obtain a two-dimensional time–frequency image. Then, the time–frequency image is preprocessed (binarization and size conversion). The preprocessed time–frequency image is then sent to the convolutional neural network (CNN) for training. After the training is completed, the features of the fully connected layer are extracted. Finally, the feature is sent to the tree structure-based machine learning process optimization (TPOT) classifier to realize offline training and online recognition. The experimental results show that the overall recognition rate of the system reaches 94.42% when the signal-to-noise ratio (SNR) is −4 dB.

Separation of Intercepted Multi-Radar Signals Based on Parameterized Time-Frequency Analysis

Frequenz ◽  
2016 ◽  
Vol 70 (9-10) ◽  
Author(s):  
W. L. Lu ◽  
J. W. Xie ◽  
H. M. Wang ◽  
C. Sheng
Keyword(s):  
Frequency Analysis ◽  
Simulated Data ◽  
Radar Signal ◽  
Electronic Warfare ◽  
Time Frequency Analysis ◽  
Time Frequency ◽  
Frequency Domains ◽  
Stationary Signals ◽  
Radar Signals ◽  
Electronic Intelligence

AbstractModern radars use complex waveforms to obtain high detection performance and low probabilities of interception and identification. Signals intercepted from multiple radars overlap considerably in both the time and frequency domains and are difficult to separate with primary time parameters. Time–frequency analysis (TFA), as a key signal-processing tool, can provide better insight into the signal than conventional methods. In particular, among the various types of TFA, parameterized time-frequency analysis (PTFA) has shown great potential to investigate the time–frequency features of such non-stationary signals. In this paper, we propose a procedure for PTFA to separate overlapped radar signals; it includes five steps: initiation, parameterized time-frequency analysis, demodulating the signal of interest, adaptive filtering and recovering the signal. The effectiveness of the method was verified with simulated data and an intercepted radar signal received in a microwave laboratory. The results show that the proposed method has good performance and has potential in electronic reconnaissance applications, such as electronic intelligence, electronic warfare support measures, and radar warning.

Sign in / Sign up

Export Citation Format

Share Document