X-RAY MICROANALYSIS USING THIN SECTIONS OF PRESERVATIVE-TREATED WOOD: Relationship of wood anatomical features to the distribution of copper

IAWA Journal ◽  
2004 ◽  
Vol 25 (1) ◽  
pp. 79-90 ◽  
Author(s):  
Hiroshi Matsunaga ◽  
Junji Matsumura ◽  
Kazuyuki Oda
Keyword(s):  
Secondary Wall ◽  
Chemical Constituents ◽  
Middle Lamella ◽  
Treated Wood ◽  
Japanese Cedar ◽  
Thin Sections ◽  
Anatomical Features ◽  
X Ray ◽  
Bordered Pits ◽  
Relationship Of

The objective of this study was to understand the micro-distribution of a copper-based preservative in wood in connection with anatomical morphology and to consider the fixation of copper in wood. Bulk specimens and semi-ultra thin sections (0.5 μm) obtained from Japanese cedar (Cryptomeria japonica) were treated with a CuAz preservative solution. After fixation of the solution in wood components, SEM-EDXA (Scanning Electron Microscope equipped with an Energy Dispersive X-ray Analyzer) was used to investigate the micro-distribution of copper. The use of semi-ultra thin sections improved characteristic X-ray spatial resolution and made it possible to analyze the micro-distribution of copper. In both earlywood and latewood of the sapwood, copper was more abundant in the compound middle lamella than in the secondary wall and concentrated in the tori. Copper was most concentrated as crystalline deposits in longitudinal parecnhyma cells. Semi-quantitative analysis revealed the copper amount to increase in this order: secondary wall in tracheids < middle lamellae < membrane of half-bordered pits < tori in tracheid pits < deposits in longitudinal parenchyma cells. These different concentrations may indicate significant interactions between the amine-copper complex in CuAz and chemical constituents of wood.

Evaluation of cell wall reinforcement in feather keratin-treated waterlogged wood as imaged by synchrotron X-ray microtomography (μXRT) and TEM

Holzforschung ◽  
2013 ◽  
Vol 67 (7) ◽  
pp. 795-803 ◽  
Author(s):  
Rie Endo ◽  
Junji Sugiyama
Keyword(s):  
Cell Walls ◽  
Middle Lamella ◽  
Treated Wood ◽  
X Ray ◽  
Feather Keratin ◽  
Transmission Electron ◽  
Chemical Hydrolysis ◽  
Chamaecyparis Pisifera ◽  
Ancient Wood ◽  
Cell Wall Reinforcement

Abstract Archaeological waterlogged woods (WLW) become considerably fragile over time because of chemical hydrolysis and the deterioration by microorganisms in the wet buried environment. The methods are sought for the dimensional stabilization of such woods. In the present article, the conservation of archaeological WLW of Chamaecyparis pisifera (Sieb. et Zucc.) Endl. by means of a commercially available feather keratin was in focus. The impregnation of an ancient wood from the 9th century A.D. was examined by the noninvasive synchrotron X-ray microtomography, which is well suited for imaging fragile samples. The thickness of the cell walls of keratin-treated wood was preserved and was comparable with that of recent wood. Notably, the middle lamella (ML) of keratin-treated wood appeared to be electron dense as indicated by transmission electron microscopy. Thus, it can be concluded that feather keratin is predominantly adsorbed on the ML and it prevents wood cell walls from collapsing and provides reinforcement.

3-D reconstruction of molecular shape from microcrystal thin sections

1983 ◽  
Vol 41 ◽  
pp. 748-749
Author(s):  
S. Cusack ◽  
J.-C. Jésior
Keyword(s):  
Three Dimensional ◽  
Molecular Shape ◽  
Biological Molecules ◽  
Fourier Space ◽  
Single Particles ◽  
Thin Sections ◽  
Standard Methods ◽  
X Ray ◽  
X Ray Crystallography ◽  
Dimensional Reconstruction

Three-dimensional reconstruction techniques using electron microscopy have been principally developed for application to 2-D arrays (i.e. monolayers) of biological molecules and symmetrical single particles (e.g. helical viruses). However many biological molecules that crystallise form multilayered microcrystals which are unsuitable for study by either the standard methods of 3-D reconstruction or, because of their size, by X-ray crystallography. The grid sectioning technique enables a number of different projections of such microcrystals to be obtained in well defined directions (e.g. parallel to crystal axes) and poses the problem of how best these projections can be used to reconstruct the packing and shape of the molecules forming the microcrystal.Given sufficient projections there may be enough information to do a crystallographic reconstruction in Fourier space. We however have considered the situation where only a limited number of projections are available, as for example in the case of catalase platelets where three orthogonal and two diagonal projections have been obtained (Fig. 1).

Chemical modification of the bacterial wall to determine sites of metal deposition

1978 ◽  
Vol 36 (2) ◽  
pp. 350-351
Author(s):  
T. J. Beveridge
Keyword(s):  
Electron Scattering ◽  
Metal Salt ◽  
Metal Deposition ◽  
Suitable Model ◽  
X Ray Diffraction ◽  
Subtilis Cell ◽  
Thin Sections ◽  
X Ray ◽  
Section Data ◽  
Metal Impregnation

The Bacillus subtilis cell wall provides a protective sacculus about the vital constituents of the bacterium and consists of a collection of anionic hetero- and homopolymers which are mainly polysaccharidic. We recently demonstrated that unfixed walls were able to trap and retain substantial amounts of metal when suspended in aqueous metal salt solutions. These walls were briefly mixed with low concentration metal solutions (5mM for 10 min at 22°C), were well washed with deionized distilled water, and the quantity of metal uptake (atomic absorption and X-ray fluorescence), the type of staining response (electron scattering profile of thin-sections), and the crystallinity of the deposition product (X-ray diffraction of embedded specimens) determined.Since most biological material possesses little electron scattering ability electron microscopists have been forced to depend on heavy metal impregnation of the specimen before obtaining thin-section data. Our experience with these walls suggested that they may provide a suitable model system with which to study the sites of reaction for this metal deposition.

Sem and X-Ray Analysis of Renal and Biliary Calculi

1976 ◽  
Vol 34 ◽  
pp. 306-307
Author(s):  
R. J. Narconis ◽  
G. L. Johnson
Keyword(s):  
Chemical Constituents ◽  
Natural State ◽  
X Ray Diffraction ◽  
Chemical Methods ◽  
X Ray ◽  
Additional Dimension ◽  
Biliary Calculi ◽  
Calculus Formation ◽  
Scanning Electron

Analysis of the constituents of renal and biliary calculi may be of help in the management of patients with calculous disease. Several methods of analysis are available for identifying these constituents. Most common are chemical methods, optical crystallography, x-ray diffraction, and infrared spectroscopy. The application of a SEM with x-ray analysis capabilities should be considered as an additional alternative.A scanning electron microscope equipped with an x-ray “mapping” attachment offers an additional dimension in its ability to locate elemental constituents geographically, and thus, provide a clue in determination of possible metabolic etiology in calculus formation. The ability of this method to give an undisturbed view of adjacent layers of elements in their natural state is of advantage in determining the sequence of formation of subsequent layers of chemical constituents.

Mitochondrial Reconstructions Based on Serial Thick Sections and HVEM

1975 ◽  
Vol 33 ◽  
pp. 286-287
Author(s):  
Jerome J. Paulin
Keyword(s):  
Imaging Techniques ◽  
Three Dimensional ◽  
Posterior Pole ◽  
Dimensional Structure ◽  
Stereo Imaging ◽  
Thin Sections ◽  
Anatomical Features ◽  
The Past ◽  
Cellular Components ◽  
Mitochondrial Reticulum

Within the past decade it has become apparent that HVEM offers the biologist a means to explore the three-dimensional structure of cells and/or organelles. Stereo-imaging of thick sections (e.g. 0.25-10 μm) not only reveals anatomical features of cellular components, but also reduces errors of interpretation associated with overlap of structures seen in thick sections. Concomitant with stereo-imaging techniques conventional serial Sectioning methods developed with thin sections have been adopted to serial thick sections (≥ 0.25 μm). Three-dimensional reconstructions of the chondriome of several species of trypanosomatid flagellates have been made from tracings of mitochondrial profiles on cellulose acetate sheets. The sheets are flooded with acetone, gluing them together, and the model sawed from the composite and redrawn.The extensive mitochondrial reticulum can be seen in consecutive thick sections of (0.25 μm thick) Crithidia fasciculata (Figs. 1-2). Profiles of the mitochondrion are distinguishable from the anterior apex of the cell (small arrow, Fig. 1) to the posterior pole (small arrow, Fig. 2).

scholarly journals An X-ray CT study of miniature clay sample preparation techniques

2019 ◽  
Vol 92 ◽  
pp. 01004
Author(s):  
Christopher Ibeh ◽  
Matteo Pedrotti ◽  
Alessandro Tarantino ◽  
Rebecca Lunn
Keyword(s):  
Sample Preparation ◽  
Shear Plane ◽  
Cohesive Soil ◽  
Image Resolution ◽  
Particle Orientation ◽  
X Ray ◽  
High Resolution Images ◽  
X Ray Computed ◽  
Sample Disturbance ◽  
Relationship Of

The quality and reliability of cohesive soil laboratory test data can be significantlyaffected by sample disturbance during sampling or sample preparation. Sample disturbance may affect key design and modelling parameters such as stiffness, preconsolidation stress, compressibility and undrained shear strength, and ultimately determine particle mobilization and shear plane development. The use of X-ray computed tomography (X-CT) in the study of soil is restricted by the inverse relationship of specimen size and obtainable image resolution. This has led to the testing of miniature specimen sizes which are far less than conventional laboratory sample size in a bid to obtain high resolution images and detailed particle-scale soil properties; however, these miniature soil specimens are more prone to sample disturbance. In this work 2% muscovite was mixed with speswhite kaolin clay as a strain marker for use in X-CT. The clay soil sample was prepared from slurry and either consolidated using an oedometer or a gypsum mould. Specimens obtained from a 7 mm tube sampler were compared to lathe trimmed specimens with a diameter (Ø) of 7 mm. Results from X-CT imaging were used to study the influence of sampler type on specimen disturbance, by analysing the muscovite particle orientation of the obtained 3D images. The results show that; for samples subjected to large consolidation stress (>200kpa) lathe trimmed specimens may be subject to lesser disturbance compared to tube sampled specimens.

Mechanical Properties of Secondary Wall and Compound Corner Middle Lamella near the Phenol-Formaldehyde (PF) Adhesive Bond Line Measured by Nanoindentation

2011 ◽  
Vol 236-238 ◽  
pp. 1746-1751 ◽  
Author(s):  
Kun Liang ◽  
Guan Ben Du ◽  
Omid Hosseinaei ◽  
Si Qun Wang ◽  
Hui Wang
Keyword(s):  
Mechanical Properties ◽  
Elastic Modulus ◽  
Secondary Wall ◽  
Phenol Formaldehyde ◽  
Middle Lamella ◽  
Adhesive Bond ◽  
Cellular Level ◽  
Bond Line ◽  
Line Region ◽  
Penetration Behavior

To find out the penetration of PF into the wood cell wall and its effects onthe mechanical properties in the cellular level, the elastic modulus and hardness of secondary wall (S2layer) and compound corner middle lamella (CCML) near PF bond line region were determined by nanoindentation. Compare to the reference cell walls (unaffected by PF), PF penetration into the wood tissues showed improved elastic modulus and hardness. And the mechanical properties decreased slowly with the increasing the distance from the bond line, which are attributed to the effects of PF penetration into S2layer and CCML. The reduced elastic modulus variations were from18.8 to 14.4 GPa for S2layer, and from10.1 to 7.65 GPa for CCML. The hardness was from 0.67 to 0.52 GPa for S2layer, and from 0.65 to 0.52 GPa for CCML. In each test viewpoint place, the average hardness of CCML was almost as high as that of S2layer, but the reduced elastic modulus was about 50% less than that of S2layer. But the increase ratio of mechanical properties was close. All the results showed PF penetrates into the CCML. The penetration behavior and penetration depth from bond line were similar in both S2layer and CCML.

scholarly journals Comparative chemical investigations of alum treated archaeological wood from various museum collections

2021 ◽  
Vol 9 (1) ◽  
Author(s):  
Jeannette Jacqueline Łucejko ◽  
Caitlin M. A. McQueen ◽  
Malin Sahlstedt ◽  
Francesca Modugno ◽  
Maria Perla Colombini ◽  
...  
Keyword(s):  
Cultural History ◽  
Inorganic Compounds ◽  
Treated Wood ◽  
Chemical Degradation ◽  
General Level ◽  
History Museum ◽  
X Ray ◽  
Archaeological Wood ◽  
Alum Treatment ◽  
Swedish History

AbstractFrom the mid-1800s to the late 1960s, conservation by alum salts (KAl(SO4)2·12H2O—potassium aluminium sulphate), using various recipes, was a common method to prevent shrinkage and to strengthen waterlogged archaeological wooden objects. This method was mainly used in Scandinavia. The alum method appears to have also been applied to highly degraded archaeological waterlogged wood in other countries, for example in the U.S and Germany. Today, many of the archaeological wooden objects treated with alum show extreme deterioration and very low pH, which are attributed to the effects of the alum-treatment. This study investigated the extent of the current levels of chemical degradation in wooden objects conserved with alum salts at different points in time (1880s, 1930s and 1905–13) in order to understand their current condition and whether extent of degradation was in any way related to time of treatment, in an attempt to understand the rate of degradation. It was also an opportunity to compare the chemical state of preservation of alum-treated wood from different collections, as only the Oseberg collection has been intensively studied in this way up until now. Samples from historical wooden objects from the following collections were investigated and compared: the Dejbjerg collection (National Museum of Denmark in Copenhagen); the Oseberg collection (Museum of Cultural History, Oslo, Norway); the Glimmingehus collection (Swedish History Museum, Sweden). Analyses of lignocellulosic polymers and of inorganic compounds were undertaken to evaluate the chemical preservation of the wooden objects. The investigations were performed using a multi-analytical approach which consisted of: pH measurements, analytical pyrolysis (Py-GC/MS), X-ray diffraction (XRD) and scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM–EDS). It was possible to link the extent of degradation with time, on a general level but we found a great variability in the state of preservation of the wood also within the same collection. It is clear, however that alum-treated wood is more degraded than archaeological wood not treated with alum.

scholarly journals Micro-Fabric Analyzer (MFA): A New Semiautomated ArcGIS-Based Edge Detector for Quantitative Microstructural Analysis of Rock Thin-Sections

2021 ◽  
Vol 10 (2) ◽  
pp. 51 ◽  
Author(s):  
Roberto Visalli ◽  
Gaetano Ortolano ◽  
Gaston Godard ◽  
Rosolino Cirrincione
Keyword(s):  
Physical Properties ◽  
Electron Backscatter Diffraction ◽  
Microstructural Analysis ◽  
Image Features ◽  
Elemental Distribution ◽  
Edge Detector ◽  
Sandstone Sample ◽  
Thin Sections ◽  
X Ray ◽  
Distribution Maps

Micro-Fabric Analyzer (MFA) is a new GIS-based tool for the quantitative extrapolation of rock microstructural features that takes advantage both of the characteristics of the X-ray images and the optical image features. Most of the previously developed edge mineral grain detectors are uniquely based on the physical properties of the X-ray-, electron-, or optical-derived images; not permitting the exploitation of the specific physical properties of each image type at the same time. More advanced techniques, such as 3D microtomography, permit the reconstruction of tridimensional models of mineral fabric arrays, even though adjacent mineral grain boundaries with the same atomic density are often not detectable. Only electron backscatter diffraction (EBSD) allows providing high-performing grain boundary detection that is crystallographically differentiated per mineral phase, even though it is relatively expensive and can be executed only in duly equipped microanalytical laboratories by suitably trained users. Instead, the MFA toolbox allows quantifying fabric parameters subdivided per mineral type starting from a crossed-polarizers high-resolution RGB image, which is useful for identifying the edges of the individual grains characterizing rock fabrics. Then, this image is integrated with a set of micro-X-ray maps, which are useful for the quantitative extrapolation of elemental distribution maps. In addition, all this is achieved by means of low-cost and easy-to-use equipment. We applied the tool on amphibolite, mylonitic-paragneiss, and -tonalite samples to extrapolate the particle fabric on different metamorphic rock types, as well as on the same sandstone sample used for another edge detector, which is useful for comparing the obtained results.

Sign in / Sign up

Export Citation Format

Share Document