Magnetotransport and Structural Properties of Nanocrystalline FeAgAl Thin Films

2008 ◽  
Vol 8 (8) ◽  
pp. 4068-4072 ◽  
Author(s):  
P. B. Patil ◽  
S. Rout ◽  
A. R. B. Rao ◽  
M. Senthil Kumar
Keyword(s):  
Thin Films ◽  
Average Particle Size ◽  
Partial Substitution ◽  
Average Particle ◽  
X Ray Diffraction ◽  
Al Content ◽  
Transmission Electron ◽  
Standard Value ◽  
Magnetoresistance Ratio ◽  
Xrd Patterns

Structural and magnetotransport properties of metallic FexAgyAlz nanogranular thin films were studied. These films with several compositions were prepared by dc magnetron sputtering. X-ray diffraction (XRD) measurements carried out on the samples show only Ag(111) peaks. The d-spacings determined from the Ag(111) peaks are smaller than the standard value for bulk Ag indicating a partial substitution of Fe and Al atoms in Ag matrix. Transmission electron diffraction (TEM) patterns show a number of Ag rings. Both XRD and TEM studies did not reveal any diffraction peaks due to Fe or Al. The average particle size determined from the TEM micrograph is 5.9 nm. This value is in good agreement with the grain size determined from the XRD patterns for the Al substituted samples. The MR was found to increase for smaller Al concentration and it decreases with further increase in Al content. In the samples investigated magnetoresistance ratio reaches a maximum value of about 4.5% for the Fe27 Ag63Al10 film.

Frequency dependence and fuel effect on optical properties of nano TiO2-based structures

2016 ◽  
Vol 30 (18) ◽  
pp. 1650247 ◽  
Author(s):  
Mahdi Ghasemifard ◽  
Misagh Ghamari ◽  
Meysam Iziy
Keyword(s):  
Particle Size ◽  
Optical Properties ◽  
Average Particle Size ◽  
Combustion Method ◽  
Average Particle ◽  
X Ray Diffraction ◽  
Nano Tio2 ◽  
Transmission Electron ◽  
Auto Combustion ◽  
Xrd Patterns

TiO2-(Ti[Formula: see text]Si[Formula: see text]O2 nanopowders (TS-NPs) with average particle size around 90 nm were successfully synthesized by controlled auto-combustion method by using citric acid/nitric acid (AC:NA) and urea/metal cation (U:MC). The structure of powders was studied based on their X-ray diffraction (XRD) patterns. The XRD of TS-NPs shows that rutile and anatase are the main phases of TS-NPs for AC:NA and U:MC, respectively. Particle size and histogram of nanopowders were characterized by transmission electron microscopy (TEM) and dynamic light scattering (DLS). Optical properties of TS-NPs were calculated by Fourier transform infrared spectroscopy (FTIR) and Kramers–Kroning (KK) relation. Plasma frequencies of TS-NPs obtained from energy loss functions depend on fuels as a result of changes in crystal structure, particle size distribution, and morphology.

scholarly journals Green Synthesis of Novel Jasmine Bud-Shaped Copper Nanoparticles

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Malathi Sampath ◽  
Ramya Vijayan ◽  
Ezhilarasu Tamilarasu ◽  
Abiraman Tamilselvan ◽  
Balasubramanian Sengottuvelan
Keyword(s):  
Copper Nanoparticles ◽  
Isonicotinic Acid ◽  
Chemical Reduction ◽  
Average Particle Size ◽  
Acid Hydrazide ◽  
Reducing Agent ◽  
Average Particle ◽  
X Ray Diffraction ◽  
Atomic Force ◽  
Transmission Electron

Novel jasmine bud-shaped copper nanoparticles were synthesized by a green chemical reduction method using polyvinylpyrrolidone (PVP) as a capping agent, L-ascorbic acid (AA) as a reducing agent as well as antioxidant agent, isonicotinic acid hydrazide (INH) as a reducing agent, and water as a solvent at 60–70°C (pH-7) in the presence of air. The UV-Vis absorption maximum obtained is 573 nm. The crystal lattice (fcc) structure of Cu Nps was confirmed by X-ray diffraction (XRD). The novel jasmine bud shape was visualized in a transmission electron microscope (TEM). The height of single copper nanobud was 6.41 nm as measured by atomic force microscope (AFM). The average particle size 6.95 nm is obtained by XRD results. Antibacterial activity of the Cu nanobuds was evaluated by testing against Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) bacteria.

DIELECTRIC PROPERTIES OF ULTRAFINE Zn-DOPED CaCu3Ti4O12 CERAMIC

2012 ◽  
Vol 02 (01) ◽  
pp. 1250007 ◽  
Author(s):  
LAXMAN SINGH ◽  
U. S. RAI ◽  
K. D. MANDAL ◽  
MADHU YASHPAL
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Room Temperature ◽  
Single Phase ◽  
Average Particle Size ◽  
Average Particle ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Sintered Powder

Ultrafine powder of CaCu2.80Zn0.20Ti4O12 ceramic was prepared using a novel semi-wet method. DTA/TG analysis of dry powder gives pre-information about formation of final product around 800°C. The formation of single phase was confirmed by X-ray diffraction analysis. The average particle size of sintered powder of the ceramic obtained from XRD and Transmission electron microscopy was found 59 nm and 102 nm, respectively. Energy Dispersive X-ray studies confirm the stoichiometry of the synthesized ceramic. Dielectric constant of the ceramic was found to be 2617 at room temperature at 1 kHz.

scholarly journals Magnetic and Structural Studies of CoFe2O4Nanoparticles Suspended in an Organic Liquid

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Branka Babić-Stojić ◽  
Vukoman Jokanović ◽  
Dušan Milivojević ◽  
Zvonko Jagličić ◽  
Darko Makovec ◽  
...  
Keyword(s):  
Room Temperature ◽  
Bulk Material ◽  
Organic Liquid ◽  
Average Particle Size ◽  
Hydrodynamic Diameter ◽  
Average Particle ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Ferrite Nanoparticle ◽  
Nanoparticle System

We present a study of magnetic and structural properties of CoFe2O4nanoparticles suspended in an organic liquid. Transmission electron microscopy shows that the nanoparticles have a narrow size distribution of average particle size 5.9 ± 1.0 nm. X-ray diffraction shows that the particles are of cubic spinel crystal structure. Dynamic light scattering measurements reveal the existence of an organic shell around the CoFe2O4nanoparticles with an average hydrodynamic diameter of 14.4 nm. Coercive magnetic field atT=5 K is found to be 11.8 kOe. Disappearance of the coercive field and remanent magnetization at about 170 K suggests that the CoFe2O4nanoparticles are superparamagnetic at higher temperatures which is confirmed by the room temperature Mössbauer spectrum analysis. Saturation magnetization of the nanoparticles of 80.8 emu/g(CoFe2O4) at 5 K reaches the value detected in the bulk material and remains very high also at room temperature. The cobalt ferrite nanoparticle system synthesized in this work exhibits magnetic properties which are very suitable for various biomedical applications.

scholarly journals Synthesis and characterization of ZnTe nanoparticles

2016 ◽  
Vol 17 (1) ◽  
pp. 1-3 ◽  
Author(s):  
Sujan Dhungana ◽  
Bhoj Raj Paudel ◽  
Surendra K. Gautam
Keyword(s):  
Particle Size ◽  
Field Effect Transistors ◽  
Average Particle Size ◽  
Precursor Solution ◽  
Chemical Precipitation ◽  
Precipitation Method ◽  
Average Particle ◽  
X Ray Diffraction ◽  
Zinc Compounds ◽  
Transmission Electron

In this work, we report the ZnTe semiconductor nanoparticles (NPs) prepared by aqueous chemical precipitation method using the tellurium precursor solution with different zinc compounds. Three batches of ZnTe NPs were synthesized to study the effect of dilution on the size and phase purity of ZnTe. The influence of source compounds and concentrations of the size and structure of NPs were studied. ZnTe NPs have great applications as field-effect transistors and photodetectors. The existing controversy regarding the crystalline structure of ZnTe NPs, whether it is cubic or hexagonal, has been resolved using X-ray Diffraction (XRD) data. The ZnTe NPs possess cubic structure, which is also confirmed by Electron Diffraction (ED) pattern. The average particle size determined from XRD data with the help of Debye-Scherrer equation is about 6 nm. The particle size can be further verified by Transmission Electron Microscopy (TEM) studies.  

EFFECT OF SUBSTRATE TEMPERATURE ON THE STRUCTURAL AND THE OPTICAL PROPERTIES OF CdTe (100) EPITAXIAL FILMS GROWN ON GaAs (100) SUBSTRATES

2007 ◽  
Vol 14 (04) ◽  
pp. 755-759 ◽  
Author(s):  
D. U. LEE ◽  
J. H. JUNG ◽  
T. W. KIM ◽  
H. S. LEE ◽  
H. L. PARK ◽  
...  
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Substrate Temperature ◽  
Misfit Dislocations ◽  
X Ray Diffraction ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Cdte Thin Films ◽  
Xrd Patterns

CdTe thin films were grown on GaAs (100) substrates by using molecular beam epitaxy at various temperatures. The results of the X-ray diffraction (XRD) patterns showed that the orientation of the grown CdTe thin films was the (100) orientation. XRD patterns, atomic force microscopy images, high-resolution transmission electron microscopy (HRTEM) images, and photoluminescence spectra showed that the crystallinity of CdTe (100) epilayers grown on GaAs (100) substrates was improved by increasing the substrate temperature. HRTEM images showed that misfit dislocations existed at the CdTe / GaAs heterointerface. These results can help improve understanding of the substrate temperature effect on the structural and the optical properties of CdTe (100)/ GaAs (100) heterostructures.

The Function Mechanism of Current Density on Antimony Nanopowder Prepared by Electrochemical Method

2011 ◽  
Vol 228-229 ◽  
pp. 639-644 ◽  
Author(s):  
Jian Lin Xu ◽  
Shu Hua Yang ◽  
Li Hui Zhang ◽  
Zhao Kang ◽  
Qiang Guo
Keyword(s):  
Current Density ◽  
Electrochemical Method ◽  
Average Particle Size ◽  
Average Particle ◽  
X Ray Diffraction ◽  
Function Mechanism ◽  
Transmission Electron ◽  
Ft Ir ◽  
Current Densities ◽  
Shape And Size

The nano-antimony particles with different shape, size and stability are prepared by electrochemical method under the dilute hydrochloric acid electrolyte including the surface dispersant OP-10 and different current densities. The influences of current density on the shape and size of nanometer antimony particles prepared by electrochemical method are analyzed by using X-ray diffraction (XRD), transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FT-IR). The results show that nano-antimony powder can be prepared by electrochemical method, and the antimony powder possesses the crystal structure with orthorhombic hexahedron. The current density has a significant impact on the agglomeration, shape and size of antimony powder. The size and shape of antimony powder are determined by the nucleation rate of nano-antimony and combination capacity of antimony ions and OP-10 surface dispersing agents affected by current density. When the current density is 25mA/cm2, the average particle size is 12nm or so, the shape is spherical, and the nano-antimony particles are well dispersed and no agglomeration.

Investigation on Carbonizing Behaviors of Nanometer-sized Cr2O3 Particles Dispersed on Alumina Particles by Metalorganic Chemical Vapor Deposition in Fluidized Bed

2005 ◽  
Vol 20 (8) ◽  
pp. 2154-2160 ◽  
Author(s):  
Hao-Tung Lin ◽  
Jow-Lay Huang ◽  
Wen-Tse Lo ◽  
Wen-Cheng J. Wei
Keyword(s):  
Chemical Vapor Deposition ◽  
Vapor Deposition ◽  
Graphite Furnace ◽  
Average Particle Size ◽  
Chemical Vapor ◽  
Average Particle ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Alumina Particles

Nanoscaled Cr2O3 powder with an average particle size of 20–40 nm, coated on alumina particles, has been produced by means of chemical vapor deposition (CVD) in a fluidized chamber, using the pyrolysis of Cr(CO)6 precursor. Amorphous and crystalline Cr2O3 particles were obtained when the temperatures of the pyrolysis were 300 and 400 °C, respectively. To prepare nanoscaled Cr3C2 powder from the nanometer-sized Cr2O3, carbonizing behavior of the Cr2O3 particles was investigated. It was found that, when amorphous Cr2O3 powders were carbonized in graphite furnace at 1150 °C for 2 h in vacuum (10−3 Torr), the powder was transformed into Cr3C2, while the crystalline Cr2O3 was transformed into a mixture of Cr7C3 and Cr3C2. The examinations by x-ray diffraction, transmission electron microscopy, and energy dispersive spectroscopy confirmed the transformation of the nano-sized Cr3C2 powders. The results of thermogravimetry and differential thermal analysis indicated that the transformation temperature was ∼1089 °C for amorphous Cr2O3 and ∼1128 °C for crystalline Cr2O3.

The concentration quenching of photoluminescence in Eu3+-doped La2O3

2013 ◽  
Vol 37 (1) ◽  
pp. 47-54 ◽  
Author(s):  
V. Đorđević ◽  
Ž. Antić ◽  
M. G. Nikolić ◽  
M. D. Dramićanin
Keyword(s):  
Room Temperature ◽  
Hexagonal Phase ◽  
Average Particle Size ◽  
Average Particle ◽  
X Ray Diffraction ◽  
X Ray ◽  
Maximum Lifetime ◽  
Transmission Electron ◽  
Lifetime Value ◽  
Kinetics Of

Abstract This work explores the influence of dopant concentration on photoluminescent emission and kinetics of Eu3+-doped (0.2−10 at.%) nanocrystalline lanthanumoxide powders. The X-ray diffraction analysis confirmed that all samples crystallize in La2O3 hexagonal phase with space group P3¯ m1. Transmission electron microscopy showed particles with non-uniform shape and diverse size distribution with an average particle size of (95 ± 5) nm. The room temperature photoluminescence spectra of all samples contain characteristic Eu3+ luminescence lines with the most pronounced red 5D0 →7F2 emission at about 626 nm. The maximum intensity of red emission is observed for the sample containing 5at.% of Eu3+ ions. The emission kinetics was recorded in the temperature range from 10K to 300 K. The maximum lifetime value of 0.98 ms obtained for the sample with 0.5at.% Eu3+ at room temperature increases up to 1.3ms at 10 K.

scholarly journals Structural and Optical Characterization of ZnO Nanoparticles Synthesized by Microemulsion Route

2013 ◽  
Vol 19 ◽  
pp. 26-36 ◽  
Author(s):  
Harish Kumar ◽  
Renu Rani
Keyword(s):  
Zno Nanoparticles ◽  
Thermal Studies ◽  
Average Particle Size ◽  
Band Gap Energy ◽  
Average Particle ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Visible Spectra ◽  
Ft Ir

ZnO nanoparticles were synthesized by microemulsion route in W/S ratio of 5 at room temperature. X-ray diffraction (XRD) pattern reveals wurtzite structure of ZnO nanoparticles. Rod shape of ZnO nanoparticles of average particle size 10.0 to 12.0 nm were observed by transmission electron microscopy. FT-IR spectra confirmed the adsorption of surfactant molecules at the surface of ZnO nanoparticles and presence of Zn-O bonding. Thermal studies were carried out by the differential scanning calorimeter (DSC) techniques. In addition, UV-Visible spectra were employed to estimate the band gap energy of ZnO nanoparticles.

Sign in / Sign up

Export Citation Format

Share Document