Study Evaluation Maternity Nutrition and Pregnancy In Vitro and In Vivo—Progesterone Nanocrystal Injection

2020 ◽  
Vol 20 (10) ◽  
pp. 6094-6102
Author(s):  
Hong Li ◽  
Shaoyun Xie ◽  
Mingxia Cao ◽  
Lihong Qi ◽  
Hongbo Chen ◽  
...  
Keyword(s):  
Particle Size ◽  
Release Rate ◽  
Crystal Form ◽  
Relative Bioavailability ◽  
Premature Delivery ◽  
Saturation Solubility ◽  
Grinding Method ◽  
Transmission Electron

In this study, the insoluble drug, progesterone, was formulated into a progesterone nanocrystal injection to improve the saturation solubility, release rate, and efficacy of progesterone, as well as to increase the relative bioavailability of progesterone, reduce the subsequent irritation, and minimize the toxicity; the advantages and feasibility of the progesterone nanocrystalline injection in the prevention of premature delivery and protection against pregnancy-associated risks in pregnant females was evaluated. The wet grinding method was used to prepare the progesterone nanocrystalline injection; its morphology, particle size, and potential were characterized by transmission electron microscopy. Crystal structure was analyzed by X-ray powder diffraction; the solubility of the injection and the progesterone drug substance in water, and the In Vitro release of the drug were evaluated for its nanometer effect In Vitro. Rabbits were injected with the progesterone nanocrystal injection as well as commercially available progesterone injections for evaluation in vivo. The formulation process of a progesterone nanocrystal injection is feasible. The crystal form is stable and the particle size is uniform. Moreover, we found that it improves the release rate, saturation solubility, and bioavailability of progesterone, while reducing muscle irritation. The results have clinical research significance.

scholarly journals A Comparison between Use of Spray and Freeze Drying Techniques for Preparation of Solid Self-Microemulsifying Formulation of Valsartan andIn VitroandIn VivoEvaluation

2013 ◽  
Vol 2013 ◽  
pp. 1-13 ◽  
Author(s):  
Sanjay Kumar Singh ◽  
Parameswara Rao Vuddanda ◽  
Sanjay Singh ◽  
Anand Kumar Srivastava
Keyword(s):  
Particle Size ◽  
Freeze Drying ◽  
Tween 80 ◽  
Immediate Release ◽  
Relative Bioavailability ◽  
Drying Methods ◽  
Flowing Powder ◽  
Capmul Mcm

The objective of the present study was to develop self micro emulsifying formulation (SMEF) of valsartan to improve its oral bioavailability. The formulations were screened on the basis of solubility, stability, emulsification efficiency, particle size and zeta potential. The optimized liquid SMEF contains valsartan (20% w/w), Capmul MCM C8 (16% w/w), Tween 80 (42.66% w/w) and PEG 400 (21.33% w/w) as drug, oil, surfactant and co-surfactant, respectively. Further, Liquid SMEF was adsorbed on Aerosol 200 by spray and freeze drying methods in the ratio of 2 : 1 and transformed into free flowing powder. Both the optimized liquid and solid SMEF had the particle size <200 nm with rapid reconstitution properties. Both drying methods are equally capable for producing stable solid SMEF and immediate release of drug inin vitroandin vivoconditions. However, the solid SMEF produced by spray drying method showed high flowability and compressibility. The solid state characterization employing the FTIR, DSC and XRD studies indicated insignificant interaction of drug with lipid and adsorbed excipient. The relative bioavailability of solid SMEF was approximately 1.5 to 3.0 folds higher than marketed formulation and pure drug. Thus, the developed solid SMEF illustrates an alternative delivery of valsartan as compared to existing formulations with improved bioavailability.

Formulation, Characterization and In-vitro and In-vivo Evaluation of Capecitabine Loaded Niosomes

2020 ◽  
Vol 17 (3) ◽  
pp. 257-268
Author(s):  
Parth Patel ◽  
Tejas Barot ◽  
Pratik Kulkarni
Keyword(s):  
Particle Size ◽  
Entrapment Efficiency ◽  
Particle Size Analysis ◽  
Multi Drug Resistance ◽  
Size Analysis ◽  
Scanning Calorimetry ◽  
In Vivo Evaluation ◽  
Transmission Electron

Background: Nanocarriers improve the efficacy of drugs by facilitating their specific delivery and protecting them from external environment resulting in a better performance against diseases. Objective: In this study, it was aimed to improve the efficacy of capecitabine against colorectal cancer by its entrapment in niosomes. Ether injection method was used to prepare niosomes composed of span 20 and cholesterol. Methods: Niosomes were evaluated by evaluating the entrapment efficiency, in-vitro drug release and cytotoxicity of capecitabine loaded niosomes. Niosomes were characterized by particle size analysis, transmission electron microscopy, Fourier transform infrared spectroscopy and differential scanning calorimetry for surface morphology and drug excipient interactions. Results: High encapsulation efficiency (90.55%) was observed, which is anticipated to resolve the multi-drug resistance problem. Reported particle size was 180.9 + 5 nm with a negative zeta potential - 21 + 0.5 mV and the kinetic study showed a concentration-dependent release of the drug from the niosome. DSC study proved entrapment of the entire drug and its non-covalent bonding with the excipients. Cytotoxicity study of niosomes on CaCO2 cell line showed an improved IC>50 value as compared to the free drug. Conclusion: Enhanced cytotoxicity observed in the results further supports the suitability of niosome as a nanocarrier for pharmaceutical drug delivery.

scholarly journals Design, Formulation, In-Vitro and Ex-Vivo Evaluation of Atazanavir Loaded Cubosomal Gel

2020 ◽  
Vol 11 (4) ◽  
pp. 12037-12054
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Ex Vivo ◽  
Entrapment Efficiency ◽  
Relative Bioavailability ◽  
Transdermal Application ◽  
Study Results ◽  
Nano Formulation

In this study, Atazanavir (ATZ) was designed into the Nano formulation called cubosomes to improve its bioavailability and curtail the adverse effects by the transdermal route delivery of ATZ -loaded cubosomes. Around twenty cubosomal formulations were formulated using a Central composite factorial design. The effect of glyceryl monooleate (GMO), surfactant (Pluronic F 127), and Cetyltrimethylammonium bromide (CTAB) were studied using processes of emulsification and homogenization. Different concentrations of independent variables on particle size distribution, zeta potential, and entrapment efficiency were determined. FTIR, DSC, X-ray, and SEM, TEM results established that the drug was encapsulated in the cubosomes. The results suggested that the optimal formula exhibited a particle size of 100±7.9 - 345±6.4 nm and entrapment efficiency ranging from 61±4.6 - 93±0.8, zeta potential values ranging from -24.51 to -32.45 mV, polydispersity index values ranged from 0.35±0.01-0.54±0.02 of ATZ. The in vitro studies showed a controlled release pattern of drug release up to 24h. The ATZ cubosomal gel application on the in vivo absorption studies of the drug was studied in rats and compared with oral ATZ solution. The in vivo study results showed that the transdermal application of ATZ cubosomal gel considerably improves the absorption of drug compared to that of oral ATZ solution and found that the relative bioavailability is 4.6 times greater of oral ATZ solution. Thus it can be concluded that the ATZ cubosomal gel application via transdermal delivery route has the potential in increasing the bioavailability of the drug.

Formulation and Evaluation of Nanosuspension of Simvastatin

2015 ◽  
Vol 8 (2) ◽  
pp. 2858-2873
Author(s):  
Rupali L. Shid ◽  
Shashikant N. Dhole ◽  
Nilesh Kulkarni ◽  
Santosh L Shid
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Factorial Design ◽  
Dissolution Rate ◽  
In Vitro Dissolution ◽  
Total Drug ◽  
23 Factorial Design ◽  
Rate Of Dissolution

Poor water solubility and slow dissolution rate are issues for the majority of upcoming and existing biologically active compounds. Simvastatin is poorly water-soluble drug and its bioavailability is very low from its crystalline form. The purpose of this study wasto increase the solubility and dissolution rate of simvastatin by the  preparation of nanosuspension by emulsification solvent diffusion method at laboratory scale. Prepared nanosus-pension was evaluated for its particle size and in vitro dissolution study and characterized by zeta potential,differential scanning calorimetry (DSC) and X-Ray diffractometry (XRD), motic digital microscopy, entrapment efficiency, total drug content, saturated solubility study and in vivo study. A 23 factorial design was employed to study the effect of independent variables, amount of SLS (X1), amount of PVPK-30 (X2) and poloxamer-188 (X3) and dependent variables are total drug content and polydispersity Index. The obtained results showed that particle size (nm) and rate of dissolution has been improved when nanosuspension prepared with the higherconcentration of PVPK-30 with the higher concentration of PVP K-30 and Poloxamer-188 and lower concentration of SLS. The particle size and zeta potential of optimized formulation was found to be 258.3 nm and 23.43. The rate of dissolution of the optimized nanosuspension was enhanced (90% in 60min), relative to plain simvastatin  (21% in 60 min), mainly due to the formation of nanosized particles. These results indicate the suitability of 23 factorial  design for preparation of simvastatin loaded nano-suspension significantly improved in vitro dissolution rate and thus possibly enhance fast onset of therapeutic drug effect. In vivo study shows increase in bioavailability in nanosuspension formulation than the plain simvastatin drug.

scholarly journals Development and In Vitro-In Vivo Evaluation of a Novel Sustained-Release Loxoprofen Pellet with Double Coating Layer

Pharmaceutics ◽  
2019 ◽  
Vol 11 (6) ◽  
pp. 260 ◽  
Author(s):  
Dongwei Wan ◽  
Min Zhao ◽  
Jingjing Zhang ◽  
Libiao Luan
Keyword(s):  
Citric Acid ◽  
Drug Release ◽  
Sustained Release ◽  
Release Rate ◽  
Diffusion Rate ◽  
Immediate Release ◽  
Pharmacokinetic Studies ◽  
Release Tablet

This study aimed to develop a novel sustained release pellet of loxoprofen sodium (LXP) by coating a dissolution-rate controlling sub-layer containing hydroxypropyl methyl cellulose (HPMC) and citric acid, and a second diffusion-rate controlling layer containing aqueous dispersion of ethyl cellulose (ADEC) on the surface of a LXP conventional pellet, and to compare its performance in vivo with an immediate release tablet (Loxinon®). A three-level, three-factor Box-Behnken design and the response surface model (RSM) were used to investigate and optimize the effects of the citric acid content in the sub-layer, the sub-layer coating level, and the outer ADEC coating level on the in vitro release profiles of LXP sustained release pellets. The pharmacokinetic studies of the optimal sustained release pellets were performed in fasted beagle dogs using an immediate release tablet as a reference. The results illustrated that both the citric acid (CA) and ADEC as the dissolution- and diffusion-rate controlling materials significantly decreased the drug release rate. The optimal formulation showed a pH-independent drug release in media at pH above 4.5 and a slightly slow release in acid medium. The pharmacokinetic studies revealed that a more stable and prolonged plasma drug concentration profile of the optimal pellets was achieved, with a relative bioavaibility of 87.16% compared with the conventional tablets. This article provided a novel concept of two-step control of the release rate of LXP, which showed a sustained release both in vitro and in vivo.

scholarly journals In vitro and in vivo Evaluation of Ibuprofen Nanosuspensions for Enhanced Oral Bioavailability

2021 ◽  
Author(s):  
Mohsen Hedaya ◽  
Farzana Bandarkar ◽  
Aly Nada
Keyword(s):  
Particle Size ◽  
Tween 80 ◽  
Aqueous Solubility ◽  
In Vitro Dissolution ◽  
In Vivo Evaluation ◽  
Poorly Soluble ◽  
Extent Of Absorption ◽  
Better Than

Introduction: The objectives were to prepare, characterize and in vivo evaluate different ibuprofen (IBU) nanosuspensions prepared by ultra-homogenization, after oral administration to rabbits. Methods: The nanosuspensions produced by ultra-homogenization were tested and compared with a marketed IBU suspension for particle size, in vitro dissolution and in vivo absorption. Five groups of rabbits received orally 25 mg/kg of IBU nanosuspension, nanoparticles, unhomogenized suspension, marketed product and untreated suspension. A sixth group received 5 mg/kg IBU intravenously. Serial blood samples were obtained after IBU administration. Results: The formulated nanosuspensions showed significant decrease in particle size. Polyvinyl Pyrrolidone K30 (PP) was found to improve IBU aqueous solubility much better than the other tested polymers. Addition of Tween 80 (TW), in equal amount as PP (IBU: PP:TW, 1:2:2 w/w) resulted in much smaller particle size and better dissolution rate. The Cmax achieved were 14.8±1.64, 11.1±1.37, 9.01±0.761, 7.03±1.38 and 3.23±1.03 μg/ml and the tmax were 36±8.2, 39±8.2, 100±17.3, 112±15 and 105±17 min for the nanosuspension, nanoparticle, unhomogenized suspension, marketed IBU suspension and untreated IBU suspension in water, respectively. Bioavailability of the different formulations relative to the marketed suspension were the highest for nanosuspension> unhomogenized suspension> nanoparticles> untreated IBU suspension. Conclusion: IBU/PP/TW nanosuspensions showed enhanced in vitro dissolution as well as faster rate and higher extent of absorption as indicated from the higher Cmax, shorter tmax and larger AUC. The in vivo data supported the in vitro results. Nanosuspensions prepared by ultra-high-pressure-homogenization technique can be used as a good formulation strategy to enhance the rate and extent of absorption of poorly soluble drugs.

scholarly journals 708 Application of a novel mSENS drug delivery technology for mRNA therapeutics

2020 ◽  
Vol 8 (Suppl 3) ◽  
pp. A750-A750
Author(s):  
Sojin Lee ◽  
Joon Young Park ◽  
Goo-Young Kim ◽  
Sang Woo Jo ◽  
Minhyuk Yun ◽  
...  
Keyword(s):  
Particle Size ◽  
Protein Expression ◽  
Cancer Vaccine ◽  
Encapsulation Efficiency ◽  
Tumor Model ◽  
Cell Responses ◽  
Delivery Platform ◽  
Mrna Therapeutics

BackgroundSuccessful clinical translation of mRNA therapeutics requires an appropriate delivery strategy to overcome instability of mRNA and facilitate cellular uptake into the cells.1 Several lipid based nanoparticle approaches that encapsulate mRNA, notably lipid nanoparticle (LNP), have been developed, but their efficiency for delivery to certain target tissues and toxicity profiles still have room for improvement. The application of a novel polymer based nanoparticle technology platform, so called Stability Enhanced Nano Shells (SENS) for mRNA (mSENS) as a mRNA delivery platform for a cancer vaccine was demonstrated.MethodsThe physicochemical properties of mSENS formulation, particle size and encapsulation efficiency, were characterized using dynamic light scattering (DLS) and gel retardation assay. Using luciferase-encoding mRNA, the protein expression levels in vitro and in vivo were evaluated by luciferase assay or bioluminescence imaging (BLI), respectively. For cancer vaccine studies, antigen (tyrosinase-related protein 2 (Trp-2))-specific T cell responses were assessed by immunophenotyping mouse splenocytes using flow cytometry and by the enzyme-linked immunosorbent spot (ELISPOT) assay. The anti-tumor efficacy was studied in B16F10 lung tumor model in C57BL/6 mice. Liver and systemic toxicity of mSENS treated mice was evaluated through blood chemistry and complete blood count (CBC) tests.ResultsA library of mSENS formulations complexed with luciferase-encoding mRNA, were characterized for their particle size, surface charge, encapsulation efficiency, colloidal stability, and in vitro and in vivo luciferase protein expression level. Upon systemic administration in mice, varying biodistribution profiles were observed, implicating the potential for tailored delivery to target tissues. Particularly, cancer vaccine application was further developed leveraging the formulation with preferential spleen delivery. Following vaccination with Trp-2 mRNA encapsulated with mSENS (Trp-2 mRNA-mSENS) in B16F10 tumor bearing mice, strong Trp-2 antigen-specific IFN-γ T-cell responses were observed. Generated anti-tumor immunity also marked suppression of B16F10 lung tumors were observed in Trp-2-mSENS immunized mice compared to non-immunized controls, demonstrating the potential of mSENS as a mRNA delivery platform for the application for vaccine.ConclusionsProprietary biodegradable polymer based-mSENS platform offers an attractive delivery strategy for mRNA by tailoring to specific therapeutic applications. Depending on the application, whether it’s a vaccine or protein replacement, a rationally designed mSENS formulation can efficiently distribute mRNA to specific tissues. In particular, application of a splenic mSENS formulation for a cancer vaccine has been demonstrated in murine tumor model. In summary, mRNA delivery through mSENS platform is expected to provide significant opportunities in clinical development for mRNA therapeutics.Ethics ApprovalThe study was approved by Samyang Biopharmaceuticals’ IACUC (Institutional Animal Care and Use Committee), approval number SYAU-2027.ReferencePiotr S. Kowalski, Arnab Rudra, Lei Miao, and Daniel G. Anderson, delivering the messenger: advances in technologies for therapeutic mRNA delivery. Molecular Therapy Vol. 27 No 4 April 2019.

scholarly journals Cemp1-p3 Peptide Promotes the Transformation of Octacalcium Phosphate into Hydroxyapatite Crystals

Crystals ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 1131
Author(s):  
Maricela Santana ◽  
Gonzalo Montoya ◽  
Raúl Herrera ◽  
Lía Hoz ◽  
Enrique Romo ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Octacalcium Phosphate ◽  
Sequence Motifs ◽  
Simple Method ◽  
Transmission Electron ◽  
Precursor Phase ◽  
Mineralized Tissues ◽  
Potent Growth

Dental cementum contains unique molecules that regulate the mineralization process in vitro and in vivo, such as cementum protein 1 (CEMP1). This protein possesses amino acid sequence motifs like the human recombinant CEMP1 with biological activity. This novel cementum protein 1-derived peptide (CEMP1-p3, from the CEMP1’s N-terminal domain: (QPLPKGCAAVKAEVGIPAPH), consists of 20 amino acids. Hydroxyapatite (HA) crystals could be obtained through the combination of the amorphous precursor phase and macromolecules such as proteins and peptides. We used a simple method to synthesize peptide/hydroxyapatite nanocomposites using OCP and CEMP1-p3. The characterization of the crystals through scanning electron microscopy (SEM), powder X-ray diffraction (XRD), high--resolution transmission electron microscopy (HRTEM), and Raman spectroscopy revealed that CEMP1-p3 transformed OCP into hydroxyapatite (HA) under constant ionic strength and in a buffered solution. CEMP1-p3 binds and highly adsorbs to OCP and is a potent growth stimulator of OCP crystals. CEMP1-p3 fosters the transformation of OCP into HA crystals with crystalline planes (300) and (004) that correspond to the cell of hexagonal HA. Octacalcium phosphate crystals treated with CEMP1-p3 grown in simulated physiological buffer acquired hexagonal arrangement corresponding to HA. These findings provide new insights into the potential application of CEMP1-p3 on possible biomimetic approaches to generate materials for the repair and regeneration of mineralized tissues, or restorative materials in the orthopedic field.

scholarly journals Development and biopharmaceutical evaluation of extended release formulation of tramadol hydrochloride based on osmotic technology

2009 ◽  
Vol 59 (1) ◽  
pp. 15-30 ◽  
Author(s):  
Pramod Kumar ◽  
Sanjay Singh ◽  
Brahmeshwar Mishra
Keyword(s):  
Drug Release ◽  
Extended Release ◽  
Relative Bioavailability ◽  
Pharmacokinetic Parameters ◽  
Healthy Human ◽  
Tramadol Hydrochloride ◽  
Release Formulation ◽  
Extended Release Formulation

Development and biopharmaceutical evaluation of extended release formulation of tramadol hydrochloride based on osmotic technologyExtended release formulation of tramadol hydrochloride (TRH) based on osmotic technology was developed and evaluated. Target release profile was selected and different variables were optimized to achieve it. Formulation variables such as the level of swellable polymer, plasticizer and the coat thickness of semipermeable membrane (SPM) were found to markedly affect drug release. TRH release was directly proportional to the levels of plasticizer but inversely proportional to the levels of swellable polymer and coat thickness of SPM. Drug release from developed formulations was independent of pH and agitation intensity but dependent on osmotic pressure of the release media.In vivostudy was also performed on six healthy human volunteers and various pharmacokinetic parameters (cmax,tmax,AUC0-24,MRT) and relative bioavailability were calculated. Thein vitroandin vivoresults were compared with the performance of two commercial TRH tablets. The developed formulation provided more prolonged and controlled TRH release compared to the marketed formulation.In vitro-in vivocorrelation (IVIVC) was analyzed according to the Wagner-Nelson method. The optimized formulation (batch IVB) exhibited good IVIV correlation (R= 0.9750). The manufacturing procedure was found to be reproducible and formulations were stable over 6 months of accelerated stability testing.

Abstract 531: Tie-2/Cre--Mediated Conditional Deletion of Lipid Phosphate Phosphatase-3 Reveals Its Role in Endothelial Cell Apoptosis

2012 ◽  
Vol 32 (suppl_1) ◽  
Author(s):  
Ishita Chatterjee ◽  
Kishore K Wary
Keyword(s):  
Endothelial Cells ◽  
Endothelial Cell ◽  
Genome Wide Association Study ◽  
Vascular Endothelial Cell ◽  
Protein Levels ◽  
Conditional Deletion ◽  
Transmission Electron ◽  
Increased Risk

Rationale: A recent genome-wide association study (GWAS) has linked a frequently occurring variation in the LPP3 (also known as PPAP2b) loci to increased risk of coronary heart disease (CAD). However, the in vivo function of LPP3 in vascular endothelial cell is incompletely understood. Goal: To address the endothelial cell (EC) specific function of Lpp3 in mice. Results: Tie-2/Cre mediated Lpp3 deletion did not affect normal vasculogenesis in early embryonic development, in contrast, in late embryonic stages it led to impaired angiogenesis associated with hemorrhage, edema and late embryonic lethal phenotype. Immunohistochemical staining followed by microscopic analyses of mutant embryos revealed reduced fibronectin and VE-cadherin expression throughout different vascular bed, and increased apoptosis in CD31+ vascular structures. Transmission electron microscopy (TEM) showed the presence of apoptotic endothelial cells and disruption of adherens junctions in mutant embryos. LPP3-knockdown in vitro showed an increase in p53 and p21 protein levels, with concomitant decrease in cell proliferation. LPP3-knockdown also decreased transendothelial electrical resistance (TER), interestingly re-expression of ß-catenin cDNA into LPP3-depleted endothelial cells partially restored the effect of loss of LPP3. Conclusion: These results suggest the ability of LPP3 to regulate survival and apoptotic activities of endothelial cells during patho/physiological angiogenesis.

Sign in / Sign up

Export Citation Format

Share Document