Demonstration of TiO2 Based Ultra High-k (k = 30) Metal-Insulator–Semiconductor Capacitor and Its Electrical Properties

2021 ◽  
Vol 21 (8) ◽  
pp. 4394-4399
Author(s):  
Bohyeon Kang ◽  
Kyeong-Keun Choi ◽  
Jehyun An ◽  
Rock-Hyun Baek

In this paper, we investigated TiO2 as gate dielectric to achieve the large dielectric constant. The ultra high-k value over 30 was obtained by Capacitance–Voltage measurement of Al/Ti/TiO2/Si Metal-Insulator–Semiconductor (MIS) capacitor. Among as deposited, rapid thermal annealing (RTA) at 750 °C and 1000 °C, the RTA at 750 °C showed the lowest gate leakage current. It implies that TiO2 has optimum RTA temperature having the lowest leakage current. When TiO2 is annealed at 750 °C, the phase of TiO2 changes to anatase and interfacial layer between TiOx and Si was formed. While TiO2 is annealed at 1000 °C, the phase of TiO2 changes to rutile and diffusion of silicon atoms was clearly observed and it causes the silicide formation. Based on measurement data, we proposed the energy band diagram of Al/TiO2/Si MIS capacitors. This diagram shows that the energy band gap of RTA at 750 °C is expanded while that of RTA at 1000 °C is contracted. In addition, TiO2 with RTA at 550 °C was tested to confirm leakage current and it shows lower leakage current than RTA at 750 °C as we expected. This result confirmed that optimum RTA temperature of TiO2 would exist under 750 °C.

2019 ◽  
Vol 33 (34) ◽  
pp. 1950423 ◽  
Author(s):  
Shing-Long Tyan ◽  
Hsiang-Chi Tang ◽  
Zhang-Wei Wu ◽  
Ting-Shan Mo

Diamond-like carbon (DLC) has been studied as a dielectric material for future metal–insulator–semiconductor (MIS) technology. In this paper, ultrathin DLC films were deposited on silicon substrates by using the dc magnetron sputtering technique at various deposition voltages. The current–voltage characteristics indicated that the leakage currents of the MIS devices decreased with an increase in deposition voltages, and that a low leakage current ([Formula: see text] A/cm2) was achieved at −2 V bias voltage. The deposition voltage effects on the structures of films were investigated through Raman spectroscopy, which indicated that the sp3 bonding fraction decreased with an increase in the deposition voltage. The ramp-voltage breakdown test revealed high effective breakdown electric field ([Formula: see text]85 MV/cm) for the MIS device with the DLC film deposited at 1100-V deposition. Stress-induced leakage current measurement indicated that the DLC film exhibited excellent reliability.


2012 ◽  
Vol 29 (5) ◽  
pp. 057702 ◽  
Author(s):  
Yue-Chan Kong ◽  
Fang-Shi Xue ◽  
Jian-Jun Zhou ◽  
Liang Li ◽  
Chen Chen ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document