Application of Bulk Richardson Parameterizations of Surface Fluxes to Heterogeneous Land Surfaces

2021 ◽  
Author(s):  
Temple R. Lee ◽  
Michael Buban ◽  
Tilden P. Meyers
Keyword(s):  
Heat Flux ◽  
Land Surface ◽  
Similarity Theory ◽  
Weather Prediction ◽  
Surface Wind ◽  
Sensible Heat Flux ◽  
Surface Heterogeneity ◽  
Surface Fluxes ◽  
Near Surface ◽  
Surface Atmosphere

AbstractMonin-Obukhov Similarity Theory (MOST) has long been used to represent surface-atmosphere exchange in numerical weather prediction (NWP) models. However, recent work has shown that bulk Richardson (Rib) parameterizations, rather than traditional MOST formulations, better represent near-surface wind, temperature, and moisture gradients. So far this work has only been applied to unstable atmospheric regimes. In this study, we extended Rib parameterizations to stable regimes and developed parameterizations for the friction velocity (u*), sensible heat flux (H), and latent heat flux (E) using datasets from the Land-Atmosphere Feedback Experiment (LAFE). We tested our new Rib parameterizations using datasets from the Verification of the Origins of Rotation in Tornadoes Experiment-Southeast (VORTEX-SE) and compared the new Rib parameterizations with traditional MOST parameterizations and MOST parameterizations obtained using the LAFE datasets. We found that fitting coefficients in the MOST parameterizations developed from LAFE datasets differed from the fitting coefficients in classical MOST parameterizations which we attributed to the land surface heterogeneity present in the LAFE domain. Regardless, the new Rib parameterizations performed just as well as and, in some instances better, than the classical MOST parameterizations and the MOST parameterizations developed from the LAFE datasets. The improvement was most evident for H, particularly for H under unstable conditions, which was based on a better 1:1 relationship between the parameterized and observed values. These findings provide motivation to transition away from MOST and to implement bulk Richardson parameterizations into NWP models to represent surface-atmosphere exchange.

scholarly journals Assessing the Impact of Changes in Land Surface Conditions on WRF Predictions in Arid Regions

2020 ◽  
Vol 21 (12) ◽  
pp. 2829-2853 ◽  
Author(s):  
Marouane Temimi ◽  
Ricardo Fonseca ◽  
Narendra Nelli ◽  
Michael Weston ◽  
Mohan Thota ◽  
...  
Keyword(s):  
Eddy Covariance ◽  
Soil Texture ◽  
Land Surface ◽  
Surface Wind ◽  
Surface Fluxes ◽  
Abu Dhabi ◽  
Horizontal Wind ◽  
Cold Bias ◽  
Near Surface ◽  
The Impact

AbstractA thorough evaluation of the Weather Research and Forecasting (WRF) Model is conducted over the United Arab Emirates, for the period September 2017–August 2018. Two simulations are performed: one with the default model settings (control run), and another one (experiment) with an improved representation of soil texture and land use land cover (LULC). The model predictions are evaluated against observations at 35 weather stations, radiosonde profiles at the coastal Abu Dhabi International Airport, and surface fluxes from eddy-covariance measurements at the inland city of Al Ain. It is found that WRF’s cold temperature bias, also present in the forcing data and seen almost exclusively at night, is reduced when the surface and soil properties are updated, by as much as 3.5 K. This arises from the expansion of the urban areas, and the replacement of loamy regions with sand, which has a higher thermal inertia. However, the model continues to overestimate the strength of the near-surface wind at all stations and seasons, typically by 0.5–1.5 m s−1. It is concluded that the albedo of barren/sparsely vegetated regions in WRF (0.380) is higher than that inferred from eddy-covariance observations (0.340), which can also explain the referred cold bias. At the Abu Dhabi site, even though soil texture and LULC are not changed, there is a small but positive effect on the predicted vertical profiles of temperature, humidity, and horizontal wind speed, mostly between 950 and 750 hPa, possibly because of differences in vertical mixing.

scholarly journals Modeling the Effect of Desert Urbanization on Local Climate and Natural Dust Generation: A Case Study for Erbil, Iraq

Urban Science ◽  
2020 ◽  
Vol 4 (4) ◽  
pp. 46
Author(s):  
Sherzad T. Tahir ◽  
Huei-Ping Huang
Keyword(s):  
Land Surface ◽  
Numerical Models ◽  
Surface Wind ◽  
Surface Fluxes ◽  
Slight Reduction ◽  
Rapid Urbanization ◽  
Near Surface ◽  
Local Climate ◽  
Surface Dust ◽  
Dust Generation

This study uses a suite of meteorological and land-surface models to quantify the changes in local climate and surface dust fluxes associated with desert urbanization. Formulas connecting friction velocity and soil moisture to dust generation are used to quantify surface fluxes for natural wind-blown dust. The models are used to conduct a series of simulations for the desert city of Erbil across a period of rapid urbanization. The results show significant nighttime warming and weak but robust daytime cooling associated with desert urbanization. A slight reduction in near-surface wind speed is also found in the areas undergoing urbanization. These findings are consistent with previous empirical and modeling studies on other desert cities. Numerical models and empirical formulas are used to produce climatological maps of surface dust fluxes as a function of season, and for the pre- and post-urbanization eras. This framework can potentially be used to bridge the gap in observation on the trends in local dust generation associated with land-use changes and urban expansions.

Evaluation of Two Land Surface Schemes Used in Terrains of Increasing Aridity in West Africa

2008 ◽  
Vol 9 (2) ◽  
pp. 173-193 ◽  
Author(s):  
D. Schüttemeyer ◽  
A. F. Moene ◽  
A. A. M. Holtslag ◽  
H. A. R. de Bruin
Keyword(s):  
Heat Flux ◽  
West Africa ◽  
Latent Heat ◽  
Latent Heat Flux ◽  
Land Surface ◽  
Sensible Heat Flux ◽  
Surface Fluxes ◽  
Semiarid Region ◽  
Canopy Conductance ◽  
Net Radiation

Abstract In this study different parameterizations for land surface models currently employed in meteorological models at ECMWF [Tiled ECMWF Surface Scheme for Exchange Processes over Land (TESSEL)] and NCEP (Noah) are evaluated for a semiarid region in Ghana, West Africa. Both schemes utilize the Jarvis–Stewart approach to calculate canopy conductance as the critical variable for partitioning the available energy into sensible and latent heat flux. Additionally, an approach within Noah is tested to calculate canopy conductance based on plant physiology (A-gs method), where the photosynthetic assimilation is coupled to the leaf stomatal conductance. All parameterizations were run offline for a seasonal cycle in 2002/03 using observations as forcings at two test sites. The two locations are in the humid tropical southern region and in the drier northern region. For the purpose of forcing and evaluation, a new set of data has been utilized to include surface fluxes obtained by scintillometry. The measurements include the rapid wet-to-dry transition after the wet season at both sites. As a general trend, it has been found that during the wet period of a season net radiation is described well by all parameterizations. During the drying process the errors in modeled net radiation increased at both sites. The models perform poorly in simulating soil heat fluxes with larger errors for TESSEL for both sites. The evolution in time for sensible heat flux and latent heat flux was tackled in different ways by the utilized parameterizations and sites with enhanced model performance for the more southern site. Soil moisture in the upper soil layers is modeled with small errors for the different parameterizations. Key adjustments for reducing net radiation during the dry period of a season are discussed. In particular, the ratio of roughness length of momentum and heat was found to be an important parameter, but will require seasonal adjustments.

scholarly journals Estimating surface fluxes over middle and upper streams of the Heihe River Basin with ASTER imagery

2009 ◽  
Vol 6 (3) ◽  
pp. 4619-4635 ◽  
Author(s):  
W. Ma ◽  
Y. Ma ◽  
Z. Hu ◽  
B. Su ◽  
J. Wang ◽  
...  
Keyword(s):  
Heat Flux ◽  
Land Surface ◽  
Sensible Heat Flux ◽  
Surface Heat ◽  
Surface Fluxes ◽  
Heat Fluxes ◽  
Heihe River ◽  
Surface Heat Fluxes ◽  
Aster Data ◽  
Land Surface Heat Fluxes

Abstract. Surface fluxes are important boundary conditions for climatological modeling and the Asian monsoon system. Recent availability of high-resolution, multi-band imagery from the ASTER (Advanced Space-borne Thermal Emission and Reflection Radiometer) sensor has enabled us to estimate surface fluxes to bridge the gap between local scale flux measurements using micrometeorological instruments and regional scale land-atmosphere exchanges of water and heat fluxes that are fundamental for the understanding of the water cycle in the Asian monsoon system. A Surface Energy Balance System (SEBS) method based on ASTER data and field observations has been proposed and tested for deriving net radiation flux (Rn), soil heat flux (G0), sensible heat flux (H) and latent heat flux (λ E) over heterogeneous land surface in this paper. As a case study, the methodology was applied to the experimental area of the WATER (Watershed Allied Telemetry Experimental Research), located at the mid-to-upstream sections of the Heihe River, northwest China. The ASTER data of 3 May and 4 June in 2008 was used in this paper for the case of mid-to-upstream sections of the Heihe River Basin. To validate the proposed methodology, the ground-measured land surface heat fluxes (net radiation flux (Rn), soil heat flux (G0), sensible heat flux (H) and latent heat flux (λ E)) were compared to the ASTER derived values. The results show that the derived surface variables and land surface heat fluxes in different months over the study area are in good accordance with the land surface status. It is therefore concluded that the proposed methodology is successful for the retrieval of land surface heat fluxes using the ASTER data and filed observation over the study area.

scholarly journals Simulating the IHOP_2002 Fair-Weather CBL with the WRF-ARW–Noah Modeling System. Part I: Surface Fluxes and CBL Structure and Evolution along the Eastern Track

2010 ◽  
Vol 138 (3) ◽  
pp. 722-744 ◽  
Author(s):  
Margaret A. LeMone ◽  
Fei Chen ◽  
Mukul Tewari ◽  
Jimy Dudhia ◽  
Bart Geerts ◽  
...  
Keyword(s):  
Heat Flux ◽  
Land Surface ◽  
Roughness Length ◽  
Vegetation Type ◽  
Sensible Heat Flux ◽  
Surface Fluxes ◽  
Weather Data ◽  
Surface Model ◽  
Fair Weather ◽  
Convective Boundary

Abstract Fair-weather data from the May–June 2002 International H2O Project (IHOP_2002) 46-km eastern flight track in southeast Kansas are compared to simulations using the advanced research version of the Weather Research and Forecasting model coupled to the Noah land surface model (LSM), to gain insight into how the surface influences convective boundary layer (CBL) fluxes and structure, and to evaluate the success of the modeling system in representing CBL structure and evolution. This offers a unique look at the capability of the model on scales the length of the flight track (46 km) and smaller under relatively uncomplicated meteorological conditions. It is found that the modeled sensible heat flux H is significantly larger than observed, while the latent heat flux (LE) is much closer to observations. The slope of the best-fit line ΔLE/ΔH to a plot of LE as a function of H, an indicator of horizontal variation in available energy H + LE, for the data along the flight track, was shallower than observed. In a previous study of the IHOP_2002 western track, similar results were explained by too small a value of the parameter C in the Zilitinkevich equation used in the Noah LSM to compute the roughness length for heat and moisture flux from the roughness length for momentum, which is supplied in an input table; evidence is presented that this is true for the eastern track as well. The horizontal variability in modeled fluxes follows the soil moisture pattern rather than vegetation type, as is observed; because the input land use map does not capture the observed variation in vegetation. The observed westward rise in CBL depth is successfully modeled for 3 of the 4 days, but the actual depths are too high, largely because modeled H is too high. The model reproduces the timing of observed cumulus cloudiness for 3 of the 4 days. Modeled clouds lead to departures from the typical clear-sky straight line relating surface H to LE for a given model time, making them easy to detect. With spatial filtering, a straight slope line can be recovered. Similarly, larger filter lengths are needed to produce a stable slope for observed fluxes when there are clouds than for clear skies.

scholarly journals Evaluation of Monin–Obukhov and Bulk Richardson Parameterizations for Surface–Atmosphere Exchange

2020 ◽  
Vol 59 (6) ◽  
pp. 1091-1107
Author(s):  
Temple R. Lee ◽  
Michael Buban
Keyword(s):  
Transfer Coefficient ◽  
Numerical Weather Prediction ◽  
Land Surface ◽  
Prediction Models ◽  
Moisture Transfer ◽  
Similarity Theory ◽  
Weather Prediction ◽  
Numerical Weather ◽  
Surface Atmosphere ◽  
Numerical Weather Prediction Models

AbstractThe Land–Atmosphere Feedback Experiment (LAFE) was a field campaign to investigate influences of different land surface types on the atmospheric boundary layer (ABL). The primary goals of LAFE were to better understand ABL development and structure and to improve turbulence parameterizations in numerical weather prediction models. Three 10-m micrometeorological towers were installed over different land surface types (i.e., early growth soybean, native grassland, and mature soybean) along a 1.7-km southwest–northeast-oriented line. All towers measured standard meteorological variables in addition to heat, moisture, and momentum fluxes. In this study, we used these measurements to evaluate the validity of applying Monin–Obukhov similarity theory (MOST) to represent surface–atmosphere exchange over different land surface types. We investigated relationships between stability length ζ and the dimensionless wind shear ϕm, temperature gradient ϕh, and moisture gradient ϕq as well as relationships between bulk Richardson number Rib, friction coefficient Cu, heat-transfer coefficient Ct, and moisture-transfer coefficient Cr. We evaluated the new similarity functions developed using independent datasets obtained during the Verification of the Origins of Rotation in Tornadoes Experiment-Southeast (VORTEX-SE). We found that using the Rib functions rather than the more traditional ζ functions to compute wind, temperature, and moisture yielded better agreement with the VORTEX-SE observations. These findings underscore limitations in MOST and motivate the need to consider modifying the functional forms of the similarity equations that form the basis for surface-layer parameterizations in numerical weather prediction models.

scholarly journals Estimating surface fluxes over the north Tibetan Plateau area with ASTER imagery

2009 ◽  
Vol 13 (1) ◽  
pp. 57-67 ◽  
Author(s):  
Weiqiang Ma ◽  
Yaoming Ma ◽  
Maoshan Li ◽  
Zeyong Hu ◽  
Lei Zhong ◽  
...  
Keyword(s):  
Heat Flux ◽  
Tibetan Plateau ◽  
Land Surface ◽  
Sensible Heat Flux ◽  
Surface Heat ◽  
Surface Fluxes ◽  
Heat Fluxes ◽  
Surface Heat Fluxes ◽  
Aster Data ◽  
Land Surface Heat Fluxes

Abstract. Surface fluxes are important boundary conditions for climatological modeling and Asian monsoon system. The recent availability of high-resolution, multi-band imagery from the ASTER (Advanced Space-borne Thermal Emission and Reflection radiometer) sensor has enabled us to estimate surface fluxes to bridge the gap between local scale flux measurements using micrometeorological instruments and regional scale land-atmosphere exchanges of water and heat fluxes that are fundamental for the understanding of the water cycle in the Asian monsoon system. A parameterization method based on ASTER data and field observations has been proposed and tested for deriving surface albedo, surface temperature, Normalized Difference Vegetation Index (NDVI), Modified Soil Adjusted Vegetation Index (MSAVI), vegetation coverage, Leaf Area Index (LAI), net radiation flux, soil heat flux, sensible heat flux and latent heat flux over heterogeneous land surface in this paper. As a case study, the methodology was applied to the experimental area of the Coordinated Enhanced Observing Period (CEOP) Asia-Australia Monsoon Project (CAMP) on the Tibetan Plateau (CAMP/Tibet), located at the north Tibetan Plateau. The ASTER data of 24 July 2001, 29 November 2001 and 12 March 2002 was used in this paper for the case of summer, winter and spring. To validate the proposed methodology, the ground-measured surface variables (surface albedo and surface temperature) and land surface heat fluxes (net radiation flux, soil heat flux, sensible heat flux and latent heat flux) were compared to the ASTER derived values. The results show that the derived surface variables and land surface heat fluxes in three different months over the study area are in good accordance with the land surface status. Also, the estimated land surface variables and land surface heat fluxes are in good accordance with ground measurements, and all their absolute percentage difference (APD) is less than 10% in the validation sites. It is therefore concluded that the proposed methodology is successful for the retrieval of land surface variables and land surface heat fluxes using the ASTER data and filed observation over the study area.

scholarly journals Estimating Spatial Variability in Atmospheric Properties over Remotely Sensed Land Surface Conditions

2008 ◽  
Vol 47 (8) ◽  
pp. 2147-2165 ◽  
Author(s):  
Giacomo Bertoldi ◽  
William P. Kustas ◽  
John D. Albertson
Keyword(s):  
Heat Flux ◽  
Land Surface ◽  
Sensible Heat Flux ◽  
Remotely Sensed ◽  
Agricultural Landscapes ◽  
Specific Humidity ◽  
General Linear ◽  
Weather Station ◽  
Near Surface ◽  
Flux Estimation

Abstract This paper investigates the spatial relationships between surface fluxes and near-surface atmospheric properties (AP), and the potential errors in flux estimation due to homogeneous atmospheric inputs over heterogeneous landscapes. A large-eddy simulation (LES) model is coupled to a surface energy balance scheme with remotely sensed surface temperature Ts as a key boundary condition. Simulations were performed for different agricultural regions having major contrasts in Ts, canopy cover, and surface roughness z0 between vegetated/irrigated and bare soil areas. If AP from a single weather station in a nonrepresentative location within the landscape are applied uniformly over the domain, significant differences in surface flux estimation with respect to the LES output are observed. The spatial correlations of AP with the fluxes, the land cover properties, and surface states were examined and the spatial scaling of these fields is analyzed using a two-dimensional wavelet technique. The results indicate a significant local correlation of the spatial distributions of the air temperature Ta with the sensible heat flux H, the specific humidity q with the latent heat flux LE, and the wind speed U with z0. These relationships can be described by a general linear form, suggesting that a simple regression relation may be applicable for most agricultural landscapes to estimate spatially variable AP fields. A simple yet practical method is proposed using remotely sensed observations and the land surface scheme, based on general linear expressions derived between Ta and H, q and LE, and U and z0. The method is shown to reproduce the main spatial patterns of AP and to reduce potential errors in local and regionally averaged heat flux estimation. This approach is recommended when only local weather station observations are available.

scholarly journals Estimating surface fluxes over the north Tibetan Plateau area with ASTER imagery

2008 ◽  
Vol 5 (4) ◽  
pp. 1705-1730 ◽  
Author(s):  
W. Ma ◽  
Y. Ma ◽  
M. Li ◽  
Z. Hu ◽  
L. Zhong ◽  
...  
Keyword(s):  
Heat Flux ◽  
Tibetan Plateau ◽  
Land Surface ◽  
Sensible Heat Flux ◽  
Surface Heat ◽  
Surface Fluxes ◽  
Heat Fluxes ◽  
Surface Heat Fluxes ◽  
Aster Data ◽  
Land Surface Heat Fluxes

Abstract. Surface fluxes are important boundary conditions for climatological modeling and Asian monsoon system. The recent availability of high-resolution, multi-band imagery from the ASTER (Advanced Space-borne Thermal Emission and Reflection radiometer) sensor has enabled us to estimate surface fluxes. ASTER covers a wide spectral region with 14 bands from the visible to the thermal infrared with high spatial, spectral and radiometric resolution. The spatial resolution varies with wavelength: 15 m in the visible and near-infrared (VNIR), 30 m in the short wave infrared (SWIR), and 90 m in the thermal infrared (TIR). A parameterization method based on ASTER data and field observations has been proposed and tested for deriving surface albedo, surface temperature, Normalized Difference Vegetation Index (NDVI), Modified Soil Adjusted Vegetation Index (MSAVI), vegetation coverage, Leaf Area Index (LAI), net radiation flux, soil heat flux, sensible heat flux and latent heat flux over heterogeneous land surface in this paper. As a case study, the methodology was applied to the experimental area of the Coordinated Enhanced Observing Period (CEOP) Asia-Australia Monsoon Project (CAMP) on the Tibetan Plateau (CAMP/Tibet), which located at the north Tibetan Plateau. The ASTER data of 24 July 2001, 29 November 2001 and 12 March 2002 was used in this paper for the case of summer, winter and spring. To validate the proposed methodology, the ground-measured surface variables (surface albedo and surface temperature) and land surface heat fluxes (net radiation flux, soil heat flux, sensible heat flux and latent heat flux) were compared to the ASTER derived values. The results show that the derived surface variables and land surface heat fluxes in three different months over the study area are in good accordance with the land surface status. Also, the estimated land surface variables and land surface heat fluxes are in good accordance with ground measurements, and all their absolute percent difference (APD) is less than 10% in the validation sites. It is therefore concluded that the proposed methodology is successful for the retrieval of land surface variables and land surface heat fluxes using the ASTER data and filed observation over the study area.

Sign in / Sign up

Export Citation Format

Share Document