Comparative analysis of the mechanical and thermal properties of polyester and epoxy natural fibre-reinforced hybrid composites

2020 ◽  
pp. 002199832097681
Author(s):  
DKK Cavalcanti ◽  
MD Banea ◽  
JSS Neto ◽  
RAA Lima
Keyword(s):  
Mechanical Properties ◽  
Thermal Properties ◽  
Comparative Analysis ◽  
Hybrid Composites ◽  
Natural Fibre ◽  
Mechanical And Thermal Properties ◽  
Reinforced Composites ◽  
Thermoset Polymer ◽  
Thermal Stability Of ◽  
Fibre Reinforced Composites

In this work, a comparative analysis of the mechanical and thermal properties of polyester and epoxy single and hybrid natural fibre-reinforced composites was performed. Pure jute, jute + curauá and jute + sisal composites with two distinct thermoset polymer resins (an epoxy and a polyester) were produced. Tensile, flexural and impact tests were carried out, in accordance to ASTM standards, to investigate and compare the mechanical properties of the composites as a function of matrix and hybridization. In addition, a thermogravimetric analysis (TGA) was used to complete the comparative analysis of the thermal properties. Finally, a scanning electron microscopy (SEM) was used to examine the fracture surface of the tested specimens. It was found that the hybridization process improved the mechanical properties of the non-hybrid jute fibre based composites for both matrices used. The resin used as matrix plays an important role on the mechanical properties of the composites. The epoxy matrix based composites presented higher tensile strength, while the polyester based composites presented higher tensile and flexural stiffness as well as higher impact energy, when compared to the epoxy-based composite. TGA analysis showed that the thermal stability of epoxy-based composites was higher compared to the polyester-based composites.

Effect of Surface Treatment on the Mechanical Properties of Banana-Glass Fibre Hybrid Composites

2014 ◽  
Vol 591 ◽  
pp. 7-10 ◽  
Author(s):  
V. Santhanam ◽  
M. Chandrasekaran
Keyword(s):  
Mechanical Properties ◽  
Glass Fibre ◽  
Synthetic Fibre ◽  
Epoxy Polymer ◽  
Hybrid Composites ◽  
Alkali Treatment ◽  
Natural Fibre ◽  
Reinforced Composites ◽  
Fibre Reinforced Composites ◽  
Effect Of Surface

Natural fibre reinforced composites have attracted the attention of research community mainly because they are turning out to be an alternative to synthetic fibre. Various natural fibres such as jute, sisal, palm, coir and banana are used as reinforcements. In this paper, banana fibres and glass fibres have been used as reinforcement. Hybrid epoxy polymer composite was fabricated using chopped banana/glass fibre and the effect of alkali treatment was also studied. It is found that the alkali treatment improved the mechanical properties of the composite.

scholarly journals Mechanical and Thermal Properties of Montmorillonite-Reinforced Polypropylene/Rice Husk Hybrid Nanocomposites

Polymers ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 1557 ◽  
Author(s):  
Khaliq Majeed ◽  
Ashfaq Ahmed ◽  
Muhammad Saifullah Abu Bakar ◽  
Teuku Meurah Indra Mahlia ◽  
Naheed Saba ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Thermal Properties ◽  
Rice Husk ◽  
Hybrid Nanocomposites ◽  
Commercial Application ◽  
Mechanical And Thermal Properties ◽  
Melt Mixing ◽  
Compatibilizing Agent ◽  
Thermal Stability Of

In recent years, there has been considerable interest in the use of natural fibers as potential reinforcing fillers in polymer composites despite their hydrophilicity, which limits their widespread commercial application. The present study explored the fabrication of nanocomposites by melt mixing, using an internal mixer followed by a compression molding technique, and incorporating rice husk (RH) as a renewable natural filler, montmorillonite (MMT) nanoclay as water-resistant reinforcing nanoparticles, and polypropylene-grafted maleic anhydride (PP-g-MAH) as a compatibilizing agent. To correlate the effect of MMT delamination and MMT/RH dispersion in the composites, the mechanical and thermal properties of the composites were studied. XRD analysis revealed delamination of MMT platelets due to an increase in their interlayer spacing, and SEM micrographs indicated improved dispersion of the filler(s) from the use of compatibilizers. The mechanical properties were improved by the incorporation of MMT into the PP/RH system and the reinforcing effect was remarkable as a result of the use of compatibilizing agent. Prolonged water exposure of the prepared samples decreased their tensile and flexural properties. Interestingly, the maximum decrease was observed for PP/RH composites and the minimum was for MMT-reinforced and PP-g-MAH-compatibilized PP/RH composites. DSC results revealed an increase in crystallinity with the addition of filler(s), while the melting and crystallization temperatures remained unaltered. TGA revealed that MMT addition and its delamination in the composite systems improved the thermal stability of the developed nanocomposites. Overall, we conclude that MMT nanoclay is an effective water-resistant reinforcing nanoparticle that enhances the durability, mechanical properties, and thermal stability of composites.

Mechanical properties of natural fibre polymer composites

2017 ◽  
Vol 37 (9) ◽  
pp. 879-895 ◽  
Author(s):  
Agnivesh Kumar Sinha ◽  
Harendra K. Narang ◽  
Somnath Bhattacharya
Keyword(s):  
Mechanical Properties ◽  
Interfacial Adhesion ◽  
Review Paper ◽  
Natural Fibre ◽  
Reinforced Composites ◽  
The Past ◽  
Fibre Composites ◽  
To Come ◽  
Fibre Reinforced Composites ◽  
Made In

Abstract Extensive efforts have been made in the last decade for the development of natural fibre composites. This development paved the way for engineers and researchers to come up with natural fibre composites (NFCs) that exhibit better mechanical properties. The present review is based on the mechanical properties of jute, abaca, coconut, kenaf, sisal, and bamboo fibre-reinforced composites. Before selecting any NFC for a particular application, it becomes necessary to understand its compatibility for the same, which can be decided by knowing its mechanical properties such as tensile, flexural, and impact strengths. This review paper emphasises on the factors influencing the mechanical properties of NFCs like the type of matrix and fibre, interfacial adhesion, and compatibility between matrix and fibre. Efforts are also made to unveil the research gaps from the past literatures, as a result of which it is inferred that there is very limited work published in the field of vibration incorporating potential fillers such as red mud and fly ash with NFCs.

Mechanical properties of natural fibre-reinforced composites

2012 ◽  
Vol 44 (2) ◽  
pp. 85-140 ◽  
Author(s):  
Manik Bhowmick ◽  
Samrat Mukhopadhyay ◽  
Ramasamy Alagirusamy
Keyword(s):  
Mechanical Properties ◽  
Natural Fibre ◽  
Reinforced Composites ◽  
Fibre Reinforced Composites

Flammability of Bamboo Fabric Reinforced Polypropylene Composites and their Hybrids

2016 ◽  
Vol 851 ◽  
pp. 155-162 ◽  
Author(s):  
Nurul Zuhairah Mahmud Zuhudi ◽  
Krishnan Jayaraman ◽  
Richard Lin
Keyword(s):  
Release Rate ◽  
Glass Fibre ◽  
Cone Calorimeter ◽  
Hybrid Composites ◽  
Natural Fibre ◽  
Reinforced Composites ◽  
Polypropylene Composites ◽  
Peak Heat Release Rate ◽  
Positive Effect ◽  
Fibre Reinforced Composites

Hybridisation is introduced as one way to use bamboo fabric as natural fibre reinforced composites (NFRCs). The research intends to determine the extent to which bamboo fabric can replace glass fibre in glass polypropylene (GPP) composites and whether the proposed hybrids are capable of competing, particularly in comparison to the flammability of GPP composites. This study evaluates the effect of hybridization on the flammability properties of bamboo fabric reinforced polypropylene composites and their hybrids. Flammability tests using cone calorimeter show that the peak Heat Release Rate (HRR) was reduced up to 39% for BPP50%, at 511.8 kW/m2, in comparison with that of neat PP, based on maximum peak values of 842 kW/m2. Interestingly, in the hybrid composites, the peak HRR reduced as glass fibre was replaced with bamboo fibre. These composites demonstrate a significant decrease in peak HRR, over 30% less than the neat PP and GPP composites respectively. These results indicate that a significant portion of the glass in GPP may be replaced with bamboo fabric, with a positive effect on fire resistance. This reduction in flammability and the improved properties obtained demonstrate promise for these hybrid materials in future applications.

scholarly journals Study and fire test of banana fibre reinforced composites with flame retardance properties

2020 ◽  
Vol 18 (1) ◽  
pp. 275-286 ◽  
Author(s):  
Raquel Ortega ◽  
Mario D. Monzón ◽  
Zaida C. Ortega ◽  
Eoin Cunningham
Keyword(s):  
Mechanical Properties ◽  
Fire Test ◽  
Natural Fibre ◽  
Natural Fibres ◽  
Reinforced Composites ◽  
Fire Behaviour ◽  
Number Of Layers ◽  
Treatment Type ◽  
Banana Fibre ◽  
Fibre Reinforced Composites

AbstractThe interest in natural fibre reinforced composites is growing in industrial applications due to natural fibres being an attractive alternative to synthetic fibres. However, it is necessary to improve the fire behaviour of the material because natural fibres have a high combustibility. The objective of this work is to evaluate the fire resistance of polymer composites reinforced with natural fibre fabric, using magnesium hydroxide as flame retardant for the polymeric matrix and alkali treatment for the fibre. The types of fabric are banana, banana with cotton and linen; and long banana fibre has been used for the formation of a nonwoven. The fire test is carried out based on ISO 9773 standard and the effect of the additive has been studied, chemical treatment, type of fabric and number of layers. Through statistical analysis, it is concluded that the flame propagation speed has a decreasing relation with respect to the percentage, but it decreases the mechanical properties considerably. In addition, the number of layers and type of fabric influence the fire properties. Finally, it is concluded that composites reinforced with linen fabric have the best mechanical properties, but banana nonwoven with 60% additive has the best fire behaviour.

Effect of Blend Ratio on the Mechanical and Thermal Properties of Polyurethane/Silicone Rubber Conductive Material

2018 ◽  
Vol 280 ◽  
pp. 264-269
Author(s):  
Heng Chun Wei ◽  
Teh Pei Leng ◽  
Yeoh Chow Keat
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Thermal Properties ◽  
Silicone Rubber ◽  
Conductive Filler ◽  
Material Testing ◽  
Testing System ◽  
Mechanical And Thermal Properties ◽  
Blend Ratio ◽  
Thermal Stability Of

This work reports on mechanical and thermal properties of a novel polymer blend. Blends were prepared by mixing silicone rubber with diphenyl – 4,4 – dissocyanate in different ratios. Graphene nanoplatelets was added as conductive filler to improve the electrical conductivity of the blends. The mechanical properties, including tensile and tear performances were measured by a material testing system. The thermal stability of the blends was measured by thermogravimetric analysis. Incorporation 20 vol.% of silicone rubber can help to improve the thermal stability of the blend, meanwhile optimum mechanical properties of the blends is achieved.

Sign in / Sign up

Export Citation Format

Share Document