Study on the accelerated-point distribution of floating fibers in the drafting zone
The motion of floating fibers in the drafting zone has a significant effect on the sliver quality after drafting. In this study, the distribution of the accelerated point of floating fibers in the drafting area was simulated based on the distribution of fibers and frictional forces during the drafting process. The simulated results denoted that the acceleration distribution of the floating fibers was more concentrated and closer to the front roller as the drafting ratio increases. The distributions of accelerated points of the floating fibers became more and more decentralized and further away from the front roller as the gauge length grew when the other parameters remained constant. In the simulation, the frictional forces of the other floating fibers moving at high velocity and low velocity and the actual contact relationships of fibers in the drafting zone were taken into consideration. Moreover, whether the fiber lengths are identical or not, the simulated accelerated-point distributions of the floating fibers were demonstrated to conform more to the actual values compared to other models. Hence, the developed model can offer effective reference from the point of view of the distribution of accelerated points in order to realize the simulation of roller drafting.