scholarly journals Investigating the impacts of a changing climate on the risk of overheating and energy performance for a UK retirement village adapted to the nZEB standards

2019 ◽  
Vol 40 (4) ◽  
pp. 470-491 ◽  
Author(s):  
Radwa Salem ◽  
Ali Bahadori-Jahromi ◽  
Anastasia Mylona
Keyword(s):  
Energy Efficiency ◽  
Thermal Comfort ◽  
Energy Performance ◽  
High Energy ◽  
Climatic Conditions ◽  
Simulation Software ◽  
Mitigation Strategies ◽  
Zero Energy ◽  
Changing Climate ◽  
Retirement Village

The death toll of the 2003 heat wave in Europe exceeded 35,000 heat-related deaths. The elderly population were the most affected. The current paradigm within the construction industry in cold-dominant countries is to design/retrofit buildings with high levels of insulation. Whilst thermal comfort may be reached during colder months with this approach, the risk of overheating can be increased during hotter months. This paper aims to examine the impacts of a changing climate on the risk of overheating and energy performance for a UK retirement village. For this study, the buildings within the retirement village will be designed to reach the nearly zero energy building standard. Consequently, the risk of overheating of the buildings within the retirement village as they currently stand and as zero energy buildings will be investigated under current and future climatic conditions. The analysis is carried out using thermal analysis simulation software (TAS, Edsl). Combined heat and power and combined cooling, heat and power will be investigated as mitigating strategies with regard to overheating. The results of this study do not undermine the importance of continuing to improve the energy efficiency of existing buildings but rather highlight that the approach undertaken should be reconsidered. Practical application: Currently, there is emphasis placed on retrofitting and designing buildings, with high energy efficiency standards. Whilst this is in line with our vision as a society towards reaching a decarbonised, sustainable future, this work highlights that doing so, carries risks with regard to overheating. Nonetheless, the results demonstrate that with the incorporation of suitable mitigation strategies and adequate ventilation strategies, it is possible to achieve an energy efficient building that meets the heating and cooling demand (and thereby thermal comfort of occupants) during the heating and non-heating season.

scholarly journals Experimental Data and Simulations of Performance and Thermal Comfort in a Typical Mediterranean House

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3311
Author(s):  
Víctor Pérez-Andreu ◽  
Carolina Aparicio-Fernández ◽  
José-Luis Vivancos ◽  
Javier Cárcel-Carrasco
Keyword(s):  
Energy Efficiency ◽  
Thermal Comfort ◽  
Energy Demand ◽  
Natural Ventilation ◽  
Thermal Characterization ◽  
Energy Performance ◽  
Building Stock ◽  
Energy Demands ◽  
Dwelling House ◽  
Account Standard

The number of buildings renovated following the introduction of European energy-efficiency policy represents a small number of buildings in Spain. So, the main Spanish building stock needs an urgent energy renovation. Using passive strategies is essential, and thermal characterization and predictive tests of the energy-efficiency improvements achieving acceptable levels of comfort for their users are urgently necessary. This study analyzes the energy performance and thermal comfort of the users in a typical Mediterranean dwelling house. A transient simulation has been used to acquire the scope of Spanish standards for its energy rehabilitation, taking into account standard comfort conditions. The work is based on thermal monitoring of the building and a numerical validated model developed in TRNSYS. Energy demands for different models have been calculated considering different passive constructive measures combined with real wind site conditions and the behavior of users related to natural ventilation. This methodology has given us the necessary information to decide the best solution in relation to energy demand and facility of implementation. The thermal comfort for different models is not directly related to energy demand and has allowed checking when and where the measures need to be done.

scholarly journals Thermal Dynamic Behavior in Bi-Zone Habitable Cell with and without Phase Change Materials

Proceedings ◽  
2020 ◽  
Vol 63 (1) ◽  
pp. 41
Author(s):  
Hanae El Fakiri ◽  
Lahoucine Ouhsaine ◽  
Abdelmajid El Bouardi
Keyword(s):  
Thermal Behavior ◽  
Thermal Comfort ◽  
Phase Change ◽  
Dynamic Behavior ◽  
Phase Change Materials ◽  
Energy Performance ◽  
High Energy ◽  
Water Heater ◽  
Simplified Modeling

The thermal dynamic behavior of buildings represents an important aspect of the energy efficiency and thermal comfort of the indoor environment. For this, phase change material (PCM) wallboards integrated into building envelopes play an important role in stabilizing the temperature of the human comfort condition. This article provides an assessment of the thermal behavior of a “bi-zone” building cell, which was built based on high-energy performance (HEP) standards and heated by a solar water heater system through a hydronic circuit. The current study is based on studying the dynamic thermal behavior, with and without implantation of PCMs on envelope structure, using a simplified modeling approach. The evolution of the average air temperature was first evaluated as a major indicator of thermal comfort. Then, an evaluation of the thermal behavior’s dynamic profile was carried out in this study, which allowed for the determination of the PCM rate anticipation in the thermal comfort of the building cell.

scholarly journals A Study on Energy-Saving Technologies Optimization towards Nearly Zero Energy Educational Buildings in Four Major Climatic Regions of China

Energies ◽  
2019 ◽  
Vol 12 (24) ◽  
pp. 4734 ◽  
Author(s):  
Jing Zhao ◽  
Yahui Du
Keyword(s):  
Energy Efficiency ◽  
Total Energy ◽  
Energy Saving ◽  
High Energy ◽  
National Standards ◽  
Saving Rate ◽  
Zero Energy ◽  
Cold Regions ◽  
Climatic Regions ◽  
Educational Buildings

An educational building is a kind of public building with a high density of occupants and high energy consumption. Energy-saving technology utilization is an effective measure to achieve high-performance buildings. However, numerous studies are greatly limited to practical application due to their strong regional pertinence and technical simplicity. This paper aims to further optimize various commonly used technologies on the basis of the current national standards, and to individually establish four recommended technology selection systems corresponding to four major climatic regions for realizing nearly zero energy educational buildings (nZEEBs) in China. An educational building was selected as the case study. An evaluation index of energy-saving contribution rate (ECR) was proposed for measuring the energy efficiency of each technology. Thereafter, high energy efficiency technologies were selected and implemented together in the four basic cases representing different climatic regions. The results showed that the total energy-saving rate in severe cold regions increased by 70.74% compared with current national standards, and about 60% of the total energy-saving rate can be improved in cold regions. However, to realize nZEEBs in hot summer and cold winter regions as well as in hot summer and warm winter regions, photovoltaic (PV) technology needs to be further supplemented.

scholarly journals Transformation of an Office Building into a Nearly Zero Energy Building (nZEB): Implications for Thermal and Visual Comfort and Energy Performance

Energies ◽  
2019 ◽  
Vol 12 (5) ◽  
pp. 895 ◽  
Author(s):  
Ilaria Ballarini ◽  
Giovanna De Luca ◽  
Argun Paragamyan ◽  
Anna Pellegrino ◽  
Vincenzo Corrado
Keyword(s):  
Thermal Comfort ◽  
Energy Savings ◽  
Energy Performance ◽  
Primary Energy ◽  
Building Envelope ◽  
Office Building ◽  
Indoor Environmental Quality ◽  
Visual Comfort ◽  
Zero Energy ◽  
Efficiency Measures

Directive 2010/31/EU promotes the refurbishment of existing buildings to change them into nearly zero-energy buildings (nZEBs). Within this framework, it is of crucial importance to guarantee the best trade-off between energy performance and indoor environmental quality (IEQ). The implications of a global refurbishment scenario on thermal and visual comfort are assessed in this paper pertaining to an existing office building. The retrofit actions applied to achieve the nZEB target consist of a combination of envelope and technical building systems refurbishment measures, involving both HVAC and lighting. Energy and comfort calculations were carried out through dynamic simulation using Energy Plus and DIVA, for the thermal and visual performance assessments, respectively. The results point out that energy retrofit actions on the building envelope would lead to significant improvements in the thermal performance, regarding both energy savings (−37% of the annual primary energy for heating) and thermal comfort. However, a daylighting reduction would occur with a consequent higher electricity demand for lighting (36%). The research presents a detailed approach applicable to further analyses aimed at optimizing the energy efficiency measures in order to reduce the imbalance between visual and thermal comfort and to ensure the best performance in both domains.

scholarly journals Spatial and Behavioral Thermal Adaptation in Net Zero Energy Buildings: An Exploratory Investigation

2020 ◽  
Vol 12 (19) ◽  
pp. 7961 ◽  
Author(s):  
Shady Attia
Keyword(s):  
Energy Efficiency ◽  
Thermal Comfort ◽  
Energy Use ◽  
Thermal Adaptation ◽  
Building Energy ◽  
Building Energy Efficiency ◽  
Zero Energy ◽  
Net Zero Energy ◽  
Net Zero ◽  
Energy Efficiency Standards

Climate responsive design can amplify the positive environmental effects necessary for human habitation and constructively engage and reduce the energy use of existing buildings. This paper aims to assess the role of the thermal adaptation design strategy on thermal comfort perception, occupant behavior, and building energy use in twelve high-performance Belgian households. Thermal adaptation involves thermal zoning and behavioral adaptation to achieve thermal comfort and reduce energy use in homes. Based on quantitative and qualitative fieldwork and in-depth interviews conducted in Brussels, the paper provides insights on the impact of using mechanical systems in twelve newly renovated nearly- and net-zero energy households. The article calls for embracing thermal adaptation as a crucial design principle in future energy efficiency standards and codes. Results confirm the rebound effect in nearly zero energy buildings and the limitation of the current building energy efficiency standards. The paper offers a fresh perspective to the field of building energy efficiency that will appeal to researchers and architects, as well as policymakers.

Towards Net-Zero Energy Buildings: A Case Study in Humid Subtropical Climate

2018 ◽  
Author(s):  
Owen Betharte ◽  
Hamidreza Najafi ◽  
Troy Nguyen
Keyword(s):  
Decision Making ◽  
Energy Efficiency ◽  
Energy Demand ◽  
Energy Performance ◽  
Subtropical Climate ◽  
Efficiency Improvement ◽  
Zero Energy ◽  
Energy Efficiency Improvement ◽  
Net Zero Energy ◽  
Net Zero

The growing world-wide energy demand and environmental considerations have attracted immense attention in building energy efficiency. Climate zone plays a major role in the process of decision making for energy efficiency projects. In the present paper, an office building located in Melbourne, FL is considered. The building is built in 1961 and the goal is to identify and prioritize the potential energy saving opportunities and retrofit the existing building into a Net-Zero Energy Building (NZEB). An energy assessment is performed and a baseline model is developed using eQUEST to simulate the energy performance of the building. Several possible energy efficiency improvement scenarios are considered and assessed through simulation including improving insulation on the walls and roof, replacing HVAC units and upgrade their control strategies, use of high efficiency lighting, and more. Selected energy efficiency improvement recommendations are implemented on the building model to achieve the lowest energy consumption. It is considered that photovoltaic (PV) panels will be used to supply the energy demand of the building. Simulations are also performed to determine the number of required PV panels and associated cost of the system is estimated. The results from this paper can help with the decision making regarding retrofit projects for NZEB in humid subtropical climate.

scholarly journals Numerical Assessment of Zebra-Stripes-Based Strategies in Buildings Energy Performance: A Case Study under Tropical Climate

Biomimetics ◽  
2022 ◽  
Vol 7 (1) ◽  
pp. 14
Author(s):  
Miguel Chen Austin ◽  
Kevin Araque ◽  
Paola Palacios ◽  
Katherine Rodríguez Maure ◽  
Dafni Mora
Keyword(s):  
Energy Efficiency ◽  
Thermal Comfort ◽  
Natural Ventilation ◽  
Heat Dissipation ◽  
Energy Performance ◽  
Base Case ◽  
Energy Needs ◽  
Numerical Assessment ◽  
Lower Temperature

Urban growth has increased the risk of over-heating both in the microclimate and inside buildings, affecting thermal comfort and energy efficiency. That is why this research aims to evaluate the energy performance of buildings in terms of thermal comfort (operative temperature (OP) levels, satisfied hours of natural ventilation SHNV, thermal lag), and energy efficiency (roof heat gains and surface temperatures) in an urban area in Panama City, using superficial-heat-dissipation biomimetic strategies. Two case studies, a base case and a proposed case, were evaluated using the Designbuilder software through dynamic simulation. The proposed case is based on a combined biomimetic strategy; the reflective characteristics of the Saharan ant applied as a coating on the roofs through a segmented pattern such as the Zebra’s stripes (one section with coating, and another without). Results showed that the OP decreased from 8 to 10 °C for the entire urban zone throughout the year. A reduction of 3.13% corresponding to 8790 kWh per year was achieved for cooling energy consumption. A difference of 5 °C in external surface temperature was obtained, having a lower temperature in which the biomimetic strategy was applied. Besides, it was evidenced that a contrasted-reflectivity-stripes pitched roof performed better than a fully reflective roof. Thus, the functionality of Zebra stripes, together with the reflective characteristics of the Saharan ant, provide better performance for buildings’ thermal regulation and energy needs for cooling.

scholarly journals Glass Curtain Wall Technology and Sustainability in Commercial Buildings in Auckland, New Zealand

2020 ◽  
Vol 7 (2) ◽  
pp. 57-65
Author(s):  
Yi Wu ◽  
Claire Flemmer
Keyword(s):  
Energy Efficiency ◽  
New Zealand ◽  
Thermal Comfort ◽  
Environmental Sustainability ◽  
High Energy ◽  
Building Envelope ◽  
Commercial Buildings ◽  
Continuous Heating ◽  
Curtain Wall ◽  
Glass Curtain Wall

Glass curtain wall provides an attractive building envelope, but it is generally regarded as unsustainable because of the high energy needed to maintain thermal comfort. This research explores the advances in the technology of glass cladding and the complex issues associated with judging its sustainability. It assesses the technology and sustainability of glass curtain wall on a sample of thirty commercial buildings in Auckland, New Zealand. Field observations of the glass-clad buildings, coupled with surveys of the building occupants and of glass cladding professionals are used to investigate the cladding characteristics, operational performance, sustainability aspects and future trends. The majority of the sample buildings are low-rise office buildings. The occupants like the aesthetics and indoor environment quality of their glass-clad buildings. However, continuous heating, ventilation and air conditioning are needed in order to maintain thermal comfort within the buildings and this has high energy consumption. The increasing use of unitized systems with double glazing instead of stick-built systems with single glazing improves the sustainability of the cladding through less material wastage and better energy efficiency. Inclusion of photovoltaic modules in the curtain wall also improves energy efficiency but it is currently too expensive for use in New Zealand. Environmental sustainability is also improved when factors such as climate, the orientation of glazed façades, solar control, ventilation and the interior building layout are considered. Any assessment of glass curtain wall sustainability needs to consider the economic and social aspects as well as the environmental aspects such as energy use

scholarly journals Towards Nearly-Zero Energy in Heritage Residential Buildings Retrofitting in Hot, Dry Climates

2021 ◽  
Vol 13 (24) ◽  
pp. 13934
Author(s):  
Hanan S. S. Ibrahim ◽  
Ahmed Z. Khan ◽  
Yehya Serag ◽  
Shady Attia
Keyword(s):  
Renewable Energy ◽  
Residential Buildings ◽  
Renewable Energy Sources ◽  
Energy Performance ◽  
High Energy ◽  
Energy Sources ◽  
Zero Energy ◽  
Building Stock ◽  
Heritage Buildings ◽  
Dry Climates

Retrofitting “nearly-zero energy” heritage buildings has always been controversial, due to the usual association of the “nearly-zero energy” target with high energy performance and the utilization of renewable energy sources in highly regarded cultural values of heritage buildings. This paper aims to evaluate the potential of turning heritage building stock into a “nearly-zero energy” in hot, dry climates, which has been addressed in only a few studies. Therefore, a four-phase integrated energy retrofitting methodology was proposed and applied to a sample of heritage residential building stock in Egypt along with microscale analysis on buildings. Three reference buildings were selected, representing the most dominant building typologies. The study combines field measurements and observations with energy simulations. In addition, simulation models were created and calibrated based on monitored data in the reference buildings. The results show that the application of hybrid passive and active non-energy generating scenarios significantly impacts energy use in the reference buildings, e.g., where 66.4% of annual electricity use can be saved. Moreover, the application of solar energy sources approximately covers the energy demand in the reference buildings, e.g., where an annual self-consumption of electricity up to 78% and surplus electricity up to 20.4% can be achieved by using photo-voltaic modules. Furthermore, annual natural gas of up to 66.8% can be saved by using two unglazed solar collectors. Lastly, achieving “nearly-zero energy” was possible for the presented case study area. The originality of this work lies in developing and applying an informed retrofitting (nearly-zero energy) guide to be used as a benchmark energy model for buildings that belong to an important historical era. The findings contribute to fill a gap in existing studies of integrating renewable energy sources to achieve “nearly-zero energy” in heritage buildings in hot climates.

scholarly journals Assessing the climate change adaptation over four European cities

2021 ◽  
Vol 2069 (1) ◽  
pp. 012069
Author(s):  
Yuchen Yang ◽  
Vahid M. Nik
Keyword(s):  
Climate Change ◽  
Thermal Comfort ◽  
Climate Change Adaptation ◽  
General Circulation ◽  
General Circulation Models ◽  
Energy Performance ◽  
Mitigation Strategies ◽  
Climate Scenarios ◽  
European Cities ◽  
Indoor Thermal Comfort

Abstract In recent years, climate change has been widely recognized as a potential problem. The building industry is taking a variety of actions towards sustainable development and climate change mitigation, such as retrofitting buildings. More than mitigation, it is important to account for climate change adaptation and investigate the probable risks and limits for mitigation strategies. For example, one major challenge may become achieving low energy demand without compromising indoor thermal comfort during warm seasons. This work investigates the future energy performance and indoor thermal comfort of four European cities belonging to four different climate zones in Europe; Barcelona, Koln, Brussels, and Copenhagen. An ensemble of future climate scenarios is used, including thirteen climate scenarios considering five different general circulation models (GCM) and three representative concentration pathways (RCP 2.6, RCP 4.5 and RCP 8.5). Through simulating the energy performance of the representative buildings in each city and considering several climate scenarios, this paper provides a comprehensive picture about the energy performance and indoor thermal comfort of the buildings for near-term, medium-term, and long-term climate conditions.

Sign in / Sign up

Export Citation Format

Share Document