High rise buildings stairwells pressure differential systems tests and improvement solutions

2020 ◽  
Vol 42 (1) ◽  
pp. 112-124
Author(s):  
Marcin Fryda ◽  
Dorota Brzezińska ◽  
Marek Dziubiński
Keyword(s):  
Building Design ◽  
Pressure Differential ◽  
Smoke Control ◽  
Differential Systems ◽  
High Rise ◽  
Draft Standard ◽  
Leakage Area ◽  
The Impact ◽  
Different Levels ◽  
Modern Building

The task of fire pressure differential systems in a building is to prevent smoke from entering protected spaces such as stairwells and areas that should remain smoke-free in the event of fire. The required overpressure must consider leakage within the protected space. This article presents the results of testing to determine the impact of leakage of the protected space on the conditions for maintaining overpressure. The research was conducted in accordance with draft standard N161-prEN12101-6. The pressure distribution as a function of time was obtained for stairwells with different levels of leakage, using a constant flow aeration fan as well as systems with a variable airflow. Practical application: Designers of differential pressure smoke control systems are required to calculate aeration fan airflow volume. The leakage level of protected spaces should be taken into consideration given that European Standard EN12101-6 suggests that gap areas should be minimal. Consequently, modern building design and construction requires estimation of the leakage area in such protected spaces. The objective is to improve safety of buildings and reduce the system reaction time during a fire.

Implementation of new high-rise building staircase pressure differential system improvements

2021 ◽  
pp. 014362442110446
Author(s):  
Dorota Brzezinska ◽  
Marcin Fryda
Keyword(s):  
Differential System ◽  
Technical Note ◽  
Pressure Differential ◽  
Test Results ◽  
High Rise ◽  
Lab Experiments ◽  
Improvement Method ◽  
System Improvement ◽  
The Impact ◽  
New Buildings

The following technical note demonstrates full-scale staircase test results of the pressure differential system improvement method described by Fryda et al. in 2021. It is a continuation of experimental research on the impact of the escape route’s leakages on the pressure differential systems for staircases. Based on the lab experiments, it has been found that an additional throttle of the leak implemented in the pressure differential system improves its effectiveness and allows it to be more precisely adjusted to the required overpressure. The results presented in this article have confirmed this hypothesis and provided the opportunity to apply for new patent solutions of a special throttle of the leak control and pressure regulating system. The proposed new leakage-based improvements could increase the efficiency of existing systems based on proportional-integral-derivative controller and could also be installed in new buildings.

The Sustainable Development of Ecological High-Rise Building Design

2011 ◽  
Vol 71-78 ◽  
pp. 465-469
Author(s):  
Bai Tao Mao
Keyword(s):  
Building Design ◽  
The Sustainable Development ◽  
High Rise ◽  
High Rise Building ◽  
The Social ◽  
Special Symbol ◽  
Symbolic Value ◽  
The Moment ◽  
The Impact ◽  
The City

A city high-rise building of the environmental balance, and its prominent position in the image and the place has a special symbol. However, high-rise buildings developed to reduce the symbolic value that it has attributed to the relevant system of architectural forms. As more and more dense urban high-rise buildings stand, we should be carefully evaluated: its ecological evvironment, will be the effect? Because of its height and volume, a high-rise building than in the top or bottom is likely in terms of physical environment on the social environment and the impact is much greater. Disturb the existing high-rise buildings in varying degrees between the various functions of the city, increasing the city high-rise buildings in the moment, how to properly control the rapid of high-rise buildings in order to maintain a sustainable ecosystem, is a question worth considering.

scholarly journals The Impact of Local Materials on the Improvement of the Thermal Comfort in Building

2020 ◽  
pp. 22-35
Author(s):  
Amadou Oumarou Fati ◽  
Bonkaney Abdou Latif ◽  
Ouedraogo Souleymane ◽  
S. M. Ky. Thierry ◽  
Mamadou Lewamy ◽  
...  
Keyword(s):  
Thermal Comfort ◽  
Energy Demand ◽  
Building Materials ◽  
Building Design ◽  
Temporal Variations ◽  
Raw Material ◽  
High Rise ◽  
Energy Demands ◽  
The Impact ◽  
Local Materials

The increasing energy demands in the building sector is considered as a main issue and has result both in the energy shortage and also environmental impact such as climate change and global warming. This demand is always increasing due to the high-rise level and also the need of thermal comfort. This paper aims to describe a passive approach to reduce the energy demand for a building through an improvement of the design of the thermal envelope. Within this work, we utilized the thermophysical properties of four building materials: three local materials (compressed earth, lateritic, and raw material) and one modern (Hollow cement) and an energy analysis of the building has been carried out. The numerical optimization of the building design has been performed dynamically by COMSOL Multiphysics software: case study of Ouagadougou and surface is 100m2. Also, the temporal variations in the inside of the room as well as the temperature of the walls and the ceiling with four different materials have been determined. The result shows that, for BLT, the maximum obtained around 22H is 308K, for Adobe it is 309K around 18H30, for BTC it was 309.2K at 20H and finally for cement block it is 310K around 18H. The mean average temperature of the building is low when we use local materials instead of modern one. Then, we conclude that, the use of local materials in the building design is an option for reducing the heat transfer into the room and at the energy consumption.

scholarly journals The Global Experience of Deployment of Energy-Efficient Technologies in High-Rise Construction

2018 ◽  
Vol 33 ◽  
pp. 01017 ◽  
Author(s):  
Natalia D. Potienko ◽  
Anna A. Kuznetsova ◽  
Darya N. Solyakova ◽  
Yulia E. Klyueva
Keyword(s):  
Energy Efficient ◽  
Building Design ◽  
Basic Principles ◽  
High Rise ◽  
Analytical Review ◽  
Compositional Interpretation ◽  
The One ◽  
Structural Levels ◽  
The Impact

The objective of this research is to examine issues related to the increasing importance of energy-efficient technologies in high-rise construction. The aim of the paper is to investigate modern approaches to building design that involve implementation of various energy-saving technologies in diverse climates and at different structural levels, including the levels of urban development, functionality, planning, construction and engineering. The research methodology is based on the comprehensive analysis of the advanced global expertise in the design and construction of energy-efficient high-rise buildings, with the examination of their positive and negative features. The research also defines the basic principles of energy-efficient architecture. Besides, it draws parallels between the climate characteristics of countries that lead in the field of energy-efficient high-rise construction, on the one hand, and the climate in Russia, on the other, which makes it possible to use the vast experience of many countries, wholly or partially. The paper also gives an analytical review of the results arrived at by implementing energy efficiency principles into high-rise architecture. The study findings determine the impact of energy-efficient technologies on high-rise architecture and planning solutions. In conclusion, the research states that, apart from aesthetic and compositional interpretation of architectural forms, an architect nowadays has to address the task of finding a synthesis between technological and architectural solutions, which requires knowledge of advanced technologies. The study findings reveal that the implementation of modern energy-efficient technologies into high-rise construction is of immediate interest and is sure to bring long-term benefits.

The Impact of High-Rise Residential Building Design Parameters on the Thermal and Energy Performance: A Literature Review

2019 ◽  
Vol 4 (11) ◽  
pp. 81
Author(s):  
Lobna Elgheriani ◽  
Brian Cody
Keyword(s):  
Thermal Performance ◽  
Residential Buildings ◽  
Publishing House ◽  
Residential Building ◽  
Building Design ◽  
Energy Performance ◽  
Design Parameters ◽  
Future Research ◽  
High Rise ◽  
The Impact

Nowadays, high-rise buildings are developing very fast to cater to the increase in demand in major urban cities. This phenomenon has contributed to several environmental problems in both construction and operation. High-rise buildings design parameters seem to lack contextual environmental consideration. Evaluating the impact of such design parameters is a practical approach to enhance the overall energy and thermal performance. Existing research gaps are distinguished based on this review. Future research directions are also proposed through a methodological scheme to investigate comparatively, the effects of different geometric factors on both thermal and energy performance, specifically in the high-rise residential buildings with consideration to different climatic regions. Keywords: Energy Performance; Thermal Performance; High-rise Buildings; High-rise Residential BuildingseISSN: 2398-4287 © 2019. The Authors. Published for AMER ABRA cE-Bs by e-International Publishing House, Ltd., UK. This is an open access article under the CC BYNC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/). Peer–review under responsibility of AMER (Association of Malaysian Environment-Behaviour Researchers), ABRA (Association of Behavioural Researchers on Asians) and cE-Bs (Centre for Environment-Behaviour Studies), Faculty of Architecture, Planning & Surveying, Universiti Teknologi MARA, Malaysia.DOI: https://doi.org/10.21834/e-bpj.v4i11.1717

scholarly journals Modelling the overheating risk in an uniform high-rise building design with a consideration of urban context and heatwaves

2019 ◽  
Vol 29 (5) ◽  
pp. 671-688 ◽  
Author(s):  
Leonardo Habitzreuter ◽  
Stefan Thor Smith ◽  
Trevor Keeling
Keyword(s):  
Climate Change ◽  
Environmental Control ◽  
Meteorological Data ◽  
Tall Buildings ◽  
Residential Building ◽  
Building Design ◽  
Vertical Gradient ◽  
Urban Context ◽  
High Rise ◽  
The Impact

Overheating in buildings is one of the increasing concerns related to climate change and can lead to an increase in heat-related health issues and higher energy consumption due to the use of air conditioning systems. Literature shows that internal conditions and demand on environmental control systems can vary with height within buildings. However, an architectural trend towards highly glazed façades for tall buildings suggests the vertical gradient of performance is not always considered in the design process. By simulating a high-rise residential building in London, a comparative analysis of the overheating risks and daylighting at different levels in the building was conducted. In this study the model was able to consider the influence of surrounding built environment on solar gain and so influence of urban location on overheating risk was taken into account. Simulations were conducted using typical reference years as well as meteorological data for specific heat-wave periods experienced in London and that are expected to become more intense and frequent due to climate change. Passive mitigation options (external shading) are demonstrated to help reduce overheating occurrence by 74%, at the same time the impact of decreased daylighting (30%) is less problematic at higher levels where daylight factor is greater.

TEACH-POT: Provide Opportunities in Teaching

2020 ◽  
pp. 79-91 ◽  
Author(s):  
Maria Giulia Ballatore ◽  
Ettore Felisatti ◽  
Laura Montanaro ◽  
Anita Tabacco
Keyword(s):  
Academic Community ◽  
Real Effect ◽  
The Real ◽  
Main Components ◽  
The Impact ◽  
Training Opportunities ◽  
Different Levels

This paper is aimed to describe and critically analyze the so-called "TEACHPOT" experience (POT: Provide Opportunities in Teaching) performed during the last few years at Politecnico di Torino. Due to career criteria, the effort and the time lecturers spend in teaching have currently undergone a significant reduction in quantity. In order to support and meet each lecturers' expectations towards an improvement in their ability to teach, a mix of training opportunities has been provided. This consists of an extremely wide variety of experiences, tools, relationships, from which everyone can feel inspired to increase the effectiveness of their teaching and the participation of their students. The provided activities are designed around three main components: methodological training, teaching technologies, methodological experiences. A discussion on the findings is included and presented basing on the data collected through a survey. The impact of the overall experience can be evaluated on two different levels: the real effect on redesigning lessons, and the discussion on the matter within the entire academic community.

scholarly journals The impact of IFRS-based accounting standards on earnings management: evidence from Malaysia

2016 ◽  
Vol 5 (1) ◽  
pp. 1
Author(s):  
Yosra Makni Fourati ◽  
Rania Chakroun Ghorbel
Keyword(s):  
Earnings Management ◽  
Financial Reporting ◽  
Emerging Market ◽  
Accounting Standards ◽  
Absolute Value ◽  
Financial Reporting Standards ◽  
Ifrs Adoption ◽  
Earning Quality ◽  
The Impact ◽  
Different Levels

This study aims to examine the consequences of International Financial Reporting Standards (IFRS) convergence in an emerging market. More specifically, we investigate whether the adoption of the new set of accounting standards in Malaysia is associated with lower earnings management. Using a sample of 3,340 firm-year observations across three reporting periods with different levels of IFRS adoption, we provide evidence that IFRS convergence improves earning quality. In particular, we find a significant decrease in the absolute value of discretionary acccruals in the partial IFRS-convergence period (2007-2011), whereas this effect is restrictive after the complete IFRS- implementation.

Sign in / Sign up

Export Citation Format

Share Document