scholarly journals A Comparative Study of the In-Built Torque and Slot Size of MBT Prescription Bracket of Different Manufacturing Companies: A Stereo-Microscopic Study

2020 ◽  
Vol 54 (4) ◽  
pp. 297-303
Author(s):  
Ashish Mathew ◽  
HC Kiran Kumar ◽  
Sadashiva Shetty
Keyword(s):  
Comparative Study ◽  
Manufacturing Companies ◽  
Central Incisor ◽  
Mean Values ◽  
Significant Difference ◽  
Slot Size ◽  
Standard Value ◽  
The Mean ◽  
Torque Values ◽  
The Ideal

Torque is produced by a twist in an “archwire” that creates a couple when interacted with a “bracket slot.” Depending on the magnitude of the twist, the size of the wire, the built-in torque and the size of the slot, the archwire expresses torsional forces to the teeth. When brackets are manufactured, some variations may inadvertently occur in the dimensions of the bracket slot. Hence this study was done to determine the accuracy of different manufacturer’s dimensions of bracket slots and the built-in torque. Method: Seven upper right central incisor brackets of Mclaughlin Bennet and Trevisi (MBT) prescription with 0.022-inch slot from 5 different manufacturers were taken to assess the accuracy of bracket slot dimensions and built-in torque. A stereomicroscope was used to accurately determine slot dimensions and built-in torque. Results: The results showed that all the bracket slots measured in this study were oversized when compared to the standard value. Dentaurum showed significant difference from the ideal slot size and brackets from JJ Orthodontics and Desires showed highly significance difference from ideal slot size. The mean values for built in torque were less in all the brackets. The brackets from JJ Orthodontics and Desires showed highly significant difference from the ideal built in torque values. Interpretation and Conclusion: The above findings of the study suggest that one should be cautious when choosing a commercially available brand in day to day practice as some of the materials may not fulfill the desired standards.

scholarly journals Tip and Torque Accuracy According to the ISO 27020:2019 Norm in Currently Available Pre-Adjusted Orthodontic Brackets

2021 ◽  
Vol 11 (24) ◽  
pp. 11657
Author(s):  
Laura Bernes Martinez ◽  
Daniele Garcovich ◽  
Alfonso Alvarado Lorenzo ◽  
Angel Zhou Wu ◽  
Riccardo Aiuto ◽  
...  
Keyword(s):  
Stainless Steel ◽  
Manufacturing Process ◽  
Metal Injection Molding ◽  
Central Incisor ◽  
Tolerance Limits ◽  
Mean Values ◽  
Slot Size ◽  
Torque Values ◽  
Single Blind ◽  
Correct Expression

Background: The precision of bracket manufacturing is fundamental to ensure the correct expression of the inbuilt information. The objective of this study was to determine the actual tip and torque values of a pool of stainless steel brackets, pre-adjusted according to the MBT prescription values, and to compare these actual values with those stated by the manufacturers in order to test their compliance with the tolerance limits reported in the ISO 27020:2019 Methods: A sample of 360 stainless steel brackets, from 12 different providers, were evaluated. All brackets had a nominal slot size of 0.022 in., belonged to the upper right central incisor, and were manufactured with the metal injection molding technique (MIM). For each provider, three different batches of the same bracket series were tested. A single-blind design was used for bracket coding. Results: Only five systems displayed torque mean values that matched the declared values (p > 0.05). Only one system did not respect the tolerance limits established in the ISO 27020:2019 norm. The tip values were different from those declared in seven of the assessed systems; however, none exceeded the tolerance limits. The inter-batch variability in most cases was not statistically significant. Conclusions: In most of the assessed systems, there can be a difference between the actual and the declared torque values, while tip information is usually accurately incorporated into the bracket slot. Lack of precision in the manufacturing process can reduce the efficacy of the appliance and force the clinician to compensate for dimensional inaccuracy through wire bending.

A COMPARISON OF TWO METHODS FOR MEASUREMENT OF ALDOSTERONE SECRETION RATE IN MAN

1966 ◽  
Vol 53 (2) ◽  
pp. 177-188 ◽  
Author(s):  
P. Lund-Johansen ◽  
T. Thorsen ◽  
K. F. Støa
Keyword(s):  
Urinary Excretion ◽  
Normal Subjects ◽  
Secretion Rate ◽  
Aldosterone Secretion ◽  
Simple Method ◽  
Mean Values ◽  
Pathological Conditions ◽  
Significant Difference ◽  
Derivative Method ◽  
The Mean

ABSTRACT A comparison has been made between (A), a relatively simple method for the measurement of aldosterone secretion rate, based on paper chromatography and direct densitometry of the aldosterone spot and (B) a more elaborate isotope derivative method. The mean secretion rate in 9 normal subjects was 112 ± 26 μg per 24 hours (method A) and 135 ± 35 μg per 24 hours (method B). The »secretion rate« in one adrenalectomized subject after the intravenous injection of 250 μg of aldosterone was 230 μg per 24 hours (method A) and 294 μg per 24 hours (method B). There was no significant difference in the mean values, and correlation between the two methods was good (r = 0.80). It is concluded that the densitometric method is suitable for clinical purposes as well as research, being more rapid and less expensive than the isotope derivative method. Method A also measures the urinary excretion of the aldosterone 3-oxo-conjugate, which is of interest in many pathological conditions. The densitometric method is obviously the less sensitive and a prerequisite for its use is an aldosterone secretion of 20—30 μg per 24 hours. Lower values are, however, rare in adults.

CONCENTRADO PROTEICO OBTIDO DAS FOLHAS DE MANDIOCA (Manihot esculenta Crantz) DE TRÊS VARIEDADES COMERCIAIS.

2017 ◽  
Vol 13 (1) ◽  
Author(s):  
Izabel Aparecida Soares ◽  
Mauro Sérgio Téo ◽  
Carlise DEBASTIANI ◽  
Suzymeire BARONI ◽  
Vanessa Silva RETUCI
Keyword(s):  
Manihot Esculenta ◽  
Crude Protein ◽  
Hydrocyanic Acid ◽  
Protein Concentrate ◽  
Manihot Esculenta Crantz ◽  
White Variety ◽  
Mean Values ◽  
Randomized Design ◽  
Significant Difference ◽  
The Mean

O trabalho teve por objetivo verificar diferenças entre rendimento do concentrado proteico e proteína bruta da folha da mandioca (Manihot esculenta Crantz), obtidos a partir de três variedades comerciais: branca, cascuda e vermelha. As manivas foram plantadas seguindo o delineamento experimental inteiramente casualizado com três repetições. Nas comparações entre as variedades, considerou coletas escalonadas pós-plantio, realizadas aos 12, 14 e 16 meses. O concentrado proteico foi obtido a partir da farinha das folhas inteiras e submetido ao método de termo - coagulação ácido e a proteína bruta pelo método padrão AOAC. Os dados foram submetidos a análise de variância e comparados pelo teste de Tukey - 5% de probabilidade. Os resultados não indicaram diferença significativa entre as médias obtidas para rendimento de concentrado proteico. Para a variável porcentagem de proteína bruta a variedade Branca foi a que apresentou maior valor, com média de 46,25%, seguida pela Cascuda e Vermelha, 44,52% e 37,30%, sucessivamente. Conclui-se que outros estudos devem avaliar condições que possam influenciar no teor de proteína foliar, como clima e solo, e, avaliar os níveis de ácido cianídrico de cada variedade, indicando qual das três é a melhor para a extração do concentrado proteico das folhas. Palavras chaves: Manihot esculenta Crantz, variedades comerciais, concentrado proteico, proteína bruta. ABSTRACT: The study aimed to assess the differences between income protein concentrate, crude protein of cassava leaf (Manihot esculenta Crantz), obtained from three commercial varieties: white, red and cascuda. The cuttings were planted following the completely randomized design with three replications. Comparisons between the varieties considered after planting staggered collections, held on 12, 14 and 16 months. The protein concentrate was obtained from flour of whole sheets and subjected to the term method - acid coagulation and crude protein by AOAC standard method. The data were submitted to ANOVA and Tukey test - 5% probability. The results indicated no significant difference between the mean values obtained for protein concentrate income. For the variable percentage of crude protein White variety showed the highest, with an average of 46.25%, followed by cascuda and Red, 44.52% and 37.30%, successively. We conclude that further studies should evaluate conditions that may affect the leaf protein content, such as climate and soil, and evaluate the hydrocyanic acid levels of each variety, indicating which of the three is the best for the extraction of protein concentrate from leaves Key words: Manihot esculenta Crantz, commercial varieties, protein concentrate, crude protein.

scholarly journals AB0100 EVALUATION OF PGA LEVEL FOR CLINICAL REMISSION WITH BOOLEAN CRITERIA, 10MM OR 20MM?

2021 ◽  
Vol 80 (Suppl 1) ◽  
pp. 1078.1-1079
Author(s):  
I. Yoshii
Keyword(s):  
Disease Activity ◽  
Patient Group ◽  
Clinical Remission ◽  
Global Assessment ◽  
Activity Index ◽  
T Test ◽  
Mean Values ◽  
Significant Difference ◽  
Remission Criteria ◽  
The Mean

Background:Patient’s global assessment (PGA) is one important component of Boolean composite criteria for remission in treat with rheumatoid arthritis (RA). However, PGA no more than 10mm is sometimes obstacle to attain clinical remission. In recent few years, one opinion that PGA no more than 20mm may be comparable as no more than 10mm.Objectives:The aim of this study is to analyze how difference of these PGA level affect disease activity and daily activities in living, and evaluate which is optimal for the remission with Boolean remission criteria from real world setting.Methods:RA patients who were followed up for more than three years in the institute were picked up in the study. Each patient was monitored with tenderness joint count (TJC), swollen joint count (SJC), PGA, evaluator’s global assessment (EGA), serum C-reactive protein level (CRP), calculated disease activity score with simplified disease activity index(SDAI), Health Assessment Questionnaire Disability Index (HAQ-DI), and pain score using visual analog scale (PS-VAS) every consulted time from the first encounter (Baseline). Patients were classified according to achievement of Boolean remission criteria. Group 1: a patient group who attained Boolean remission wih TJC≦1, SJC≦1, CRP≦1mg/dl, and PGA≦1 (G-1), Group 2: a patient group who could not attained the Boolean remission used in the G-1 evaluation, but could attained another Boolean remission with TJC≦1, SJC≦1, CRP≦1mg/dl, and PGA≦2 (G-2), and Group 3: a patient group who could not attain Boolean remission for neither criterion.Mean values of measured parameters at Baseline and after the Baseline were compared statistically with Student T-test. Mean values of the same parameters in the G-1 and G-2 at the time of attain Boolean remission for each criteria, mean values of each of these parameters thereafter, and changes of these parameters were compared statistically with Student T-test.Results:A total of 438 patients 385 in the G-1 group, 16 in the G-2 group, and 37 in the G-3 group, were recruited. In parameters at Baseline, level of TJC, SJC, PGA, EGA, SDAI, and HAQ-DI in the G-1 was significantly lower than in the G-3, whereas no significant differences in any parameters demonstrated between in the G-2 and G-3. Level of HAQ-DI, and PS-VAS after Baseline in the G-1 was lower than in the G-3, whereas no significant difference of these parameters after Baseline demonstrated between in the G-2 and G-3. TJC, SJC, PGA, and EGA demonstrated significant less level in the G-1 than in the other two groups. The mean SDAI score at the time of first achievement of Boolean remission in the G-1 and G-2 were 1.08 and 2.57, respectively. The mean value of SDAI score after remission in the G-1 and G-2 were 3.35 and 6.44, respectively. These values and PS-VAS including change of the SDAI score demonstrated significant difference between the two groups (p<0.01), whereas HAQ-DI in the two groups demonstrated no significant difference.Conclusion:These results suggested that setting PGA as no more than 10mm should be reasonable for the evaluation of clinical remission with the Boolean criteria.Disclosure of Interests:None declared

A new simpler approach to measure the strength of toe plantar flexion requiring no mechanical restraint with a light-weight device

2021 ◽  
pp. 095441192110029
Author(s):  
Yuko Komuro ◽  
Yuji Ohta
Keyword(s):  
Plantar Flexion ◽  
Mean Value ◽  
Simple Approach ◽  
Light Weight ◽  
New Approach ◽  
Mean Values ◽  
Mechanical Restraint ◽  
Significant Difference ◽  
Ankle Joints ◽  
The Mean

Conventionally, the strength of toe plantar flexion (STPF) is measured in a seated position, in which not only the target toe joints but also the knee and particularly ankle joints, are usually restrained. We have developed an approach for the measurement of STPF which does not involve restraint and considers the interactions of adjacent joints of the lower extremities. This study aimed to evaluate this new approach and comparing with the seated approach. A thin, light-weight, rigid plate was attached to the sole of the foot in order to immobilize the toe area. Participants were 13 healthy young women (mean age: 24 ± 4 years). For measurement of STPF with the new approach, participants were instructed to stand, raise the device-wearing leg slightly, plantar flex the ankle, and push the sensor sheet with the toes to exert STPF. The sensor sheet of the F-scan II system was inserted between the foot sole and the plate. For measurement with the seated approach, participants were instructed to sit and push the sensor with the toes. They were required to maintain the hip, knee, and ankle joints at 90°. The mean values of maximum STPF of the 13 participants obtained with each approach were compared. There was no significant difference in mean value of maximum STPF when the two approaches were compared (new: 59 ± 23 N, seated: 47 ± 33 N). The coefficient of variation of maximum STPF was smaller for data obtained with the new approach (new: 39%, seated: 70%). Our simple approach enables measurement of STPF without the need for the restraints that are required for the conventional seated approach. These results suggest that the new approach is a valid method for measurement of STPF.

Spontaneous Blinks as a Criterion of Visual Fatigue during Prolonged Work on Visual Display Terminals

2001 ◽  
Vol 92 (1) ◽  
pp. 234-250 ◽  
Author(s):  
Kenichi Kaneko ◽  
Kazuyoshi Sakamoto
Keyword(s):  
Time Lag ◽  
Vertical Direction ◽  
Visual Display ◽  
Hard Copy ◽  
Subjective Feeling ◽  
Visual Fatigue ◽  
Work Time ◽  
Mean Values ◽  
Significant Difference ◽  
The Mean

Visual fatigue caused by prolonged work viewing a Visual Display Terminals (VDT) and of work reading a hard-copy were assessed by electromyogram (EMG) waveform and electrooculogram (EOG) waveform in spontaneous blinks as objective criteria, and by questionnaire of subjective feeling, and by task performance. The duration and the amplitude of the EMG of the orbicularis ocular muscle on the right side and the EOG of the vertical direction to the eyelid were measured for 10 subjects who participated in a figure task consisting of the addition of single-digit numbers on a VDT work or a work with a hard-copy. The mean values of the duration and the amplitude of the EMG and the EOG were evaluated by the averaging of 10 waveforms of the spontaneous blinks for all subjects. The time lag from the EMG to the EOG in the process of the generation of spontaneous blinks was also analyzed. These five parameters were evaluated during the work time. The mean values for the duration of the EMG increased gradually during the work time, but the amplitude did not show significant difference between the prework and a work time. There was no significant change of the duration of the EOG, but the mean amplitude of the EOG decreased as the work time progressed, and the time lag significantly extended. The blinks frequency increased relatively when using a VDT. The rate of fluctuation for these parameters was higher during use of a VDT than use of a hard-copy. The time lag at five hours of VDT work was extended by 90% based on the value at the prework. The symptoms of general fatigue and fatigue of the eyes increased linearly during the VDT work for six hours. The results indicated a significant correlation between the objective parameters for the activity of the spontaneous blinks, i.e., duration and amplitude of EMG and EOG, and the time lag between EMG and EOG, and the subjective feeling was recognized in the time course of the task. These experimental results suggested that the parameters regarding the EMG and the EOG for the spontaneous blinks were effective indices for assessing visual fatigue during prolonged VDT work.

scholarly journals Influence of Apical Patency and Cleaning of the Apical Foramen on Periapical Extrusion in Retreatment

2013 ◽  
Vol 24 (5) ◽  
pp. 482-486 ◽  
Author(s):  
Marili Doro Andrade Deonizio ◽  
Gilson Blitzkow Sydney ◽  
Antonio Batista ◽  
Roberto Pontarolo ◽  
Paulo Ricardo Bittencourt Guimarães ◽  
...  
Keyword(s):  
Material Removal ◽  
Filling Material ◽  
Mean Values ◽  
Filtration System ◽  
Root Canal Retreatment ◽  
Significant Difference ◽  
Before And After ◽  
The Mean ◽  
The Difference ◽  
Removal Technique

This study evaluated the influence of apical patency, root filling removal technique and cleaning of the apical foramen, concerning the amount of debris extruded during root canal retreatment. Forty mandibular incisors were randomly assigned to 4 groups - GIM (n=10), GIIM (n=10), GIPT (n=10) and GIIPT (n=10), which were named according to leaving (I) or not (II) apical patency during canal preparation and filling removal technique (manual - M or ProTaper system - PT). After filling material removal, each specimen of each group had the apical foramen cleaned by sizes 15, 20 and 25 instruments, generating 12 subgroups: GIM15, GIM20, GIM25, GIIM15, GIIM20, GIIM25, GIPT15, GIPT20, GIPT25, GIIPT15, GIIPT20 and GIIPT25. Extruded filling debris was collected by a Milipore filtration system, an HV-durapore, 0.45 µm pore filter with a 25 mm diameter. The filters were weighed before and after the collection on an analytical scale (10–5 g), and the difference was calculated. The mean weight of extruded filling debris was analyzed statistically by Kruskal-Wallis and Friedman ANOVA tests (α=0.05). The mean values found in the groups (in mg) were: GIM (0.95±0.94), GIIM (0.47±0.62), GIPT (0.30±0.31) and GIIPT (0.32±0.44). There was no statistically significant difference among any of the groups or subgroups (p>0.05). ProTaper provided the smallest amount of extruded filling material, regardless of presence or absence of apical patency, followed by manual technique, without and with apical patency. Additional amounts of debris were collected during cleaning of the apical foramen, regardless of the instrument, presence/absence of patency or root filling removal technique.

scholarly journals CNO abundances in giants of the peculiar globular cluster NGC 1851

2015 ◽  
Vol 11 (S317) ◽  
pp. 352-353
Author(s):  
G. Tautvaišienė ◽  
A. Drazdauskas ◽  
C. Lardo ◽  
S. L. Martell ◽  
E. Pancino ◽  
...  
Keyword(s):  
High Resolution ◽  
Globular Cluster ◽  
Mean Values ◽  
Significant Difference ◽  
The Mean ◽  
Cno Abundances

AbstractWe provide CNO and Fe abundance investigations for a sample of up to 45 NGC 1851 giants. High-resolution spectra were obtained with the VLT UVES spectrograph in the framework of the Gaia-ESO Survey. The stars in our sample can be separated into two groups with a difference of 0.1 dex in the mean metallicity, 0.3 dex in the mean C/N, and no significant difference in the mean values of C+N+O.

Normal levels of vitamin A in tissues of the Syrian hamster (Mesocricetus auratus) determined colorimetrically

1988 ◽  
Vol 22 (2) ◽  
pp. 117-121 ◽  
Author(s):  
M. E. Robinson ◽  
A. M. Verrinder Gibbins ◽  
M. H. Hardy
Keyword(s):  
Vitamin A ◽  
Syrian Hamster ◽  
Cheek Pouch ◽  
Standard Diet ◽  
Male And Female ◽  
Mean Values ◽  
A Value ◽  
Significant Difference ◽  
Wet Weight ◽  
The Mean

Vitamin A levels in tissues of 20 normal adult hamsters on a standard diet were measured colorimetrically. No significant difference between male and female animals was found for any of the tissues sampled. The mean vitamin A value for blood plasma in 20 animals was 53·4 μg/dl. Mean values for liver, kidneys, flank skin and cheek pouch were 813, 1·29, 1·84 and 1·31 mg/g wet weight, respectively. The vitamin assay was less suitable for small organs such as trachea.

A Comparative Study of Endoscopic Coblation Adenoidectomy and Regular Curettage Adenoidectomy in a Tertiary Care Hospital in Kerala

2021 ◽  
Vol 8 (41) ◽  
pp. 3559-3566
Author(s):  
Abdul Salam R. T. ◽  
Shahul Hameed A. ◽  
Meera Rajan
Keyword(s):  
Blood Loss ◽  
Comparative Study ◽  
Tertiary Care ◽  
Operation Time ◽  
Care Hospital ◽  
Adenoid Tissue ◽  
Significant Difference ◽  
Tube Function ◽  
Prospective Comparative Study ◽  
The Mean

BACKGROUND An ideal surgery to remove hypertrophied adenoid mass should be safe, with less bleeding and operation time along with post-operative improvement in the eustachian tubal ventilation and normal respiration. It should also have low morbidity and mortality. Among the various methods described for its removal, the two commonly used methods are conventional cold curettage method and coblation technique. The purpose of this study was to collate the safety and efficacy of endoscopic coblation adenoidectomy with the conventional curettage adenoidectomy. METHODS A prospective comparative study with fifty patients was studied who underwent adenoidectomy. Twenty five patients underwent endoscopy assisted coblation adenoidectomy and twenty five patients underwent regular adenoidectomy by curettage. RESULTS Patients who underwent coblation adenoidectomy showed better results during follow up in terms of completeness of removal. 80 % of children undergoing regular adenoidectomy by curettage method showed remnant adenoid tissue in the nasopharynx at the end of the procedure. But it was 6 % among the children undergoing endoscopic assisted coblation adenoidectomy. The mean duration of operation was higher for endoscopic assisted coblation adenoidectomy which was significant statistically. The mean blood loss was 30.36 ml in regular curettage adenoidectomy; 10.6 ml with endoscopic coblation adenoidectomy. The grading of pain was significantly lower in endoscopic assisted coblation adenoidectomy. There was no significant difference between two groups in terms of eustachian tube function after surgery. CONCLUSIONS Coblation adenoidectomy has significant advantages over conventional adenoidectomy in terms of completeness of removal, reduced blood loss, and lower post-operative pain grade. KEYWORDS Coblation, Adenoidectomy, Curettage, Haemorrhage and Complications

Sign in / Sign up

Export Citation Format

Share Document