Mechanical properties of black sugar palm fiber-reinforced concrete

2011 ◽  
Vol 30 (11) ◽  
pp. 994-1004 ◽  
Author(s):  
T. Ferdiansyah ◽  
H. Abdul Razak
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Reinforced Concrete ◽  
Flexural Strength ◽  
Volume Fraction ◽  
Crack Deflection ◽  
Fiber Reinforced Concrete ◽  
Engineering Properties ◽  
Palm Fiber ◽  
Sugar Palm Fiber

This article reports the results of an investigation on the engineering properties of concrete containing black sugar palm fiber. Three fiber lengths of 15, 25, and 35 mm in four volume fractions, namely 0.2%, 0.4%, 0.6%, and 0.8%, were utilized in this investigation. The values of compressive, flexural, toughness, first crack deflection, first crack toughness, and toughness indices are reported for ages up to 90 days. It was observed that the addition of palm fibers slightly increased the flexural strength of concrete. The incorporation of the fibers had no significant effect on the compressive strength. The mix with 0.8% volume fraction and 35 mm length fiber gave higher toughness and ductility compared to other mixes.

Polypropylene Fiber Reinforced Concrete for Airport Rigid Pavements: Compressive and Flexural Strength

2011 ◽  
Vol 219-220 ◽  
pp. 1601-1607 ◽  
Author(s):  
Tammam Merhej ◽  
Xin Kai Li ◽  
De Cheng Feng
Keyword(s):  
Compressive Strength ◽  
Reinforced Concrete ◽  
Flexural Strength ◽  
Volume Fraction ◽  
Linear Regression Analysis ◽  
Polypropylene Fiber ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Rigid Pavements ◽  
Polypropylene Fiber Reinforced Concrete

This paper presents the experimental investigation carried out to study the behavior of polypropylene fiber reinforced concrete (PPFRC) under compression and flexure. Crimped polypropylene fibers and twisted polypropylene fiber were used with 0.0%, 0.2%, 0.4% and 0.6% volume fractions. The influence of the volume fraction of each shape of polypropylene fiber on the compressive strength and flexural strength is presented. Empirical equations to predict the effect of polypropylene fiber on compressive and flexural strength of concrete were proposed using linear regression analysis. An increase of 27% in flexural strength was obtained when 0.6% volume fraction of twisted polypropylene fiber was added. It was also found that the contribution of fiber in flexural strength is more effective when twisted fibers were used. The compressive strength was found to be less affected by polypropylene fiber addition.

Experimental Study of the Mechanical Properties of Hybrid Fiber Reinforced Concrete

2009 ◽  
Vol 610-613 ◽  
pp. 69-75
Author(s):  
Yuan Hua ◽  
Tai Quan Zhou
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Reinforced Concrete ◽  
Aspect Ratio ◽  
Flexural Strength ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Hybrid Fiber ◽  
Reinforced Fiber ◽  
Reinforced Materials

Different kinds of fiber are used to reinforce the concrete to improve the concrete mechanical properties. The high modulus and high flexibility fibers are often used to reinforce in the cement base, which leads to the higher performance compound cement based materials. In the paper, the carbon fiber and glass fiber material are used as flexibility reinforced materials. The polypropylene fiber and the polyethylene fiber are used as strength reinforced materials. The combinations of the flexibility reinforced fiber and strength reinforced fiber are chosen as C-P HF (Carbon and Polypropylene Hybrid Fiber) and G-Pe HF (Glass and Polyethylene Hybrid Fiber). The concrete mixture ratio and the fiber-reinforced amount are determined to the author’s previous study. The relationship between compressive strength, flexural strength and length/diameter aspect ratio of fiber for the carbon and polypropylene hybrid fiber reinforced concrete (C-P HFRC), and for the glass and polyethylene hybrid fiber reinforced concrete (G--Pe HFRC) was tested and discussed. The testing results show that length/diameter aspect ratio of fiber obviously affects the flexural strength of C-P HFRC and G-Pe HFRC, though the compressive strength is slightly affected by the length-diameter aspect ratio.

Mechanical Properties of Hybrid Nylon-Steel- and Steel-Fibre-Reinforced High Strength Concrete at Low Fibre Volume Fraction

2010 ◽  
Vol 168-170 ◽  
pp. 1704-1707 ◽  
Author(s):  
Ming Kun Yew ◽  
Othman Ismail
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Reinforced Concrete ◽  
High Strength Concrete ◽  
Steel Fiber ◽  
Volume Fraction ◽  
High Strength ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Steel Fiber Reinforced Concrete

The mechanical properties of hybrid nylon-steel-fiber-reinforced concrete were investigated in comparison to that of the steel-fiber-reinforced concrete, at the same volume fraction (0.5%). The combining of fibers, often called hybridization is investigated in this paper for a very high strength concrete of an average compressive strength of 105 MPa. Test results showed that fibers when used in a hybrid nylon-steel fibers reinforced concrete form could result in superior composite performance compared to steel-fiber-reinforced concrete. The basic property of the hybridized material that was evaluated and analyzed extensively was the modulus of rupture (MOR) and splitting tensile while the compressive strength was only slightly decreased compared to single steel fiber reinforced concrete. There is a synergy effect in the hybrid fibers system.

scholarly journals Experimental Study on the Mechanical Properties of Amorphous Alloy Fiber-Reinforced Concrete

2018 ◽  
Vol 2018 ◽  
pp. 1-9 ◽  
Author(s):  
Chaohua Jiang ◽  
Yizhi Wang ◽  
Wenwen Guo ◽  
Chen Jin ◽  
Min Wei
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Reinforced Concrete ◽  
Amorphous Alloy ◽  
Flexural Strength ◽  
Concrete Strength ◽  
Splitting Tensile Strength ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced

With great mechanical properties and corrosion resistance, amorphous alloy fiber (AAF) is a highly anticipated material in the fiber-reinforced concrete (FRC) field. In this study, the mechanical properties of AAFRC such as compressive strength, tensile strength, and flexural strength were examined. The comparison and analysis between AAFRC and steel fiber-reinforced concrete (SFRC) were also carried out. The results show that adding fibers significantly improves the concrete strength and toughness index. Compared with plain concrete, the compressive strength, splitting tensile strength, and flexural strength of AAFRC increase by 8.21–16.72%, 10.4–32.8%, and 18.12–45.21%, respectively. Meanwhile, the addition of AAF with a greater tensile strength and larger unit volume quantity improves the splitting tensile strength and flexural strength of concrete more noticeably than that of SF. Adding AAF improves the ductility of concrete more significantly in comparison to the SF. AAFRC shows great interfacial bonding performance as well. A prediction equation for the strength of AAFRC was proposed, which verified good accuracy calibrated based on the test results.

Mechanical properties of steel fiber reinforced concrete material in construction of road bridge deck

2021 ◽  
Vol 16 (4) ◽  
pp. 169-176
Author(s):  
Xiaohu Luo
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Reinforced Concrete ◽  
Flexural Strength ◽  
Steel Fiber ◽  
Fiber Content ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Steel Fiber Reinforced Concrete ◽  
Bridge Construction

In order to improve the application effect of steel fiber reinforced concrete (SFRC) in road bridge construction, the mechanical properties of SFRC with different fiber content were analyzed. The SFRC specimens with 0%, 0.5%, 1%, 1.5% and 2% fiber content were designed, and the mechanical properties were tested. The results showed that the compressive strength first increased and then decreased with the increase of fiber content, and the maximum compressive strength of SFRC1.5 reached 40.86 MPa, increasing by 7.19%; the increase amplitude of tensile strength of SFRC1.5 was 73.04%, which was the most obvious; the flexural strength of SFRC increased with the increase of fiber content, and the flexural strength of SFRC2 was 9.78 MPa, increasing by 94.43%. It is concluded from the experimental results of a case study that SFRC1.5 presents the optimal overall mechanical properties and is more suitable for road bridge construction.

EVALUATION OF COMPRESSIVE STRENGTH OF SYNTHETIC FIBER REINFORCED CONCRETE

2020 ◽  
Vol 7 (1) ◽  
Author(s):  
Saman Hedjazi ◽  
Daniel Castillo
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Reinforced Concrete ◽  
Fiber Volume Fraction ◽  
Volume Fraction ◽  
Fiber Reinforced Concrete ◽  
Synthetic Fiber ◽  
Fiber Reinforced ◽  
Fiber Volume ◽  
Synthetic Fibers

This paper evaluates the effect of discrete fibers in concrete on the pulse velocity and mechanical properties of FRC. Two different type of synthetic fibers consisting of Polypropylene and Nylon were investigated. The effect of concrete mix proportions such as types of fiber, volume fraction of fiber, water-to-cement ratio (w/c), and curing conditions were examined. An experimental program was designed and conducted on 100 mm x 200 mm cylindrical specimens to evaluate the properties of FRC. The compressive strength obtained from the Compression Test Machine (CTM) was compared to those calculated from UPV. The difference between two types of synthetic fibers on concrete properties were investigated. Results show that the highest compressive strength of Polypropylene Fiber Reinforced Concrete (PFRC) was achieved at 0.5% fiber volume fraction, whereas for Nylon Fiber Reinforced Concrete (NFRC) the highest compressive strength was obtained at 1.0% fiber volume fraction. Additionally, results show that the available equations relating UPV to compressive strength of concrete need modifications when used for different fibers. Therefore, either new or modified empirical equations are needed for better estimation of mechanical properties of FRC.

scholarly journals Effect of Chopped Basalt Fibers on the Mechanical Properties and Microstructure of High Performance Fiber Reinforced Concrete

2014 ◽  
Vol 2014 ◽  
pp. 1-14 ◽  
Author(s):  
Tehmina Ayub ◽  
Nasir Shafiq ◽  
M. Fadhil Nuruddin
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Reinforced Concrete ◽  
Flexural Strength ◽  
High Performance ◽  
Cement Content ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Basalt Fibers ◽  
High Performance Fiber

This paper presents the mechanical properties and the microstructure of the high performance fiber reinforced concrete (HPFRC) containing up to 3% volume fraction of chopped Basalt fibers. Three types of the concrete were prepared, out of which, the first type was prepared by utilizing 100% cement content. The other two types of the concrete were prepared by replacing 10% cement content with silica fume and the locally produced metakaolin. Using each concrete type, four mixes were prepared in which Basalt fibers were added in the range of 0–3%; that is, total twelve mixes of the HPFRC concrete were prepared. From each of the twelve concrete mixes, total twelve specimens were cast to determine the mechanical properties of the HPFRC including compressive strength (cube and cylinder), splitting tensile strength, and the flexural strength. In this way, a total of 108 specimens were cast and tested in this study. Test results showed that the addition of the Basalt fibers significantly increased the tensile splitting strength and the flexural strength of the HPFRC, while there was slight improvement in the compressive strength with the addition of Basalt fibers. The microstructure of HPFRC was examined to determine the interfacial transition zone (ITZ) between the aggregates and the paste by using field emission scanning electron microscope (FESEM), which showed the improvement of the ITZ due to the addition of the Basalt fibers.

Effect of combined drink cans and steel fibers on the impact resistance and mechanical properties of concrete

2020 ◽  
Vol 14 (2) ◽  
pp. 6734-6742
Author(s):  
A. Syamsir ◽  
S. M. Mubin ◽  
N. M. Nor ◽  
V. Anggraini ◽  
S. Nagappan ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Reinforced Concrete ◽  
Impact Resistance ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Fiber Reinforced ◽  
Indirect Tensile ◽  
The Impact

This study investigated the combine effect of 0.2 % drink cans and steel fibers with volume fractions of 0%, 0.5%, 1%, 1.5%, 2%, 2.5% and 3% to the mechanical properties and impact resistance of concrete. Hooked-end steel fiber with 30 mm and 0.75 mm length and diameter, respectively was selected for this study.  The drinks cans fiber were twisted manually in order to increase friction between fiber and concrete. The results of the experiment showed that the combination of steel fibers and drink cans fibers improved the strength performance of concrete, especially the compressive strength, flexural strength and indirect tensile strength. The results of the experiment showed that the combination of steel fibers and drink cans fibers improved the compressive strength, flexural strength and indirect tensile strength by 2.3, 7, and 2 times as compare to batch 1, respectively. Moreover, the impact resistance of fiber reinforced concrete has increase by 7 times as compared to non-fiber concretes. Moreover, the impact resistance of fiber reinforced concrete consistently gave better results as compared to non-fiber concretes. The fiber reinforced concrete turned more ductile as the dosage of fibers was increased and ductility started to decrease slightly after optimum fiber dosage was reached. It was found that concrete with combination of 2% steel and 0.2% drink cans fibers showed the highest compressive, split tensile, flexural as well as impact strength.    

scholarly journals Properties of High-Strength Flowable Mortar Reinforced with Palm Fibers

2012 ◽  
Vol 2012 ◽  
pp. 1-5 ◽  
Author(s):  
Eethar Thanon Dawood ◽  
Mahyuddin Ramli
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Physical And Mechanical Properties ◽  
High Strength ◽  
Test Results ◽  
Palm Fiber ◽  
Toughness Index ◽  
Strength And Toughness

This study was conducted to determine some physical and mechanical properties of high-strength flowable mortar reinforced with different percentages of palm fiber (0, 0.2, 0.4, 0.6, 0.8, 1.0, 1.2, 1.4, and 1.6% as volumetric fractions). The density, compressive strength, flexural strength, and toughness index were tested to determine the mechanical properties of this mortar. Test results illustrate that the inclusion of this fiber reduces the density of mortar. The use of 0.6% of palm fiber increases the compressive strength and flexural strength by about 15.1%, and 16%, respectively; besides, the toughness index (I5) of the high-strength flowable mortar has been significantly enhanced by the use of 1% and more of palm fiber.

scholarly journals The Mechanical Properties of Steel-Polypropylene Fibre Composites Concrete (HyFRCC)

2015 ◽  
Vol 773-774 ◽  
pp. 949-953 ◽  
Author(s):  
Izni Syahrizal Ibrahim ◽  
Wan Amizah Wan Jusoh ◽  
Abdul Rahman Mohd Sam ◽  
Nur Ain Mustapa ◽  
Sk Muiz Sk Abdul Razak
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Volume Fraction ◽  
Concrete Strength ◽  
Fibre Volume Fraction ◽  
Fibre Volume ◽  
Polypropylene Fibre ◽  
Experimental Results

This paper discusses the experimental results on the mechanical properties of hybrid fibre reinforced composite concrete (HyFRCC) containing different proportions of steel fibre (SF) and polypropylene fibre (PPF). The mechanical properties include compressive strength, tensile strength, and flexural strength. SF is known to enhance the flexural and tensile strengths, and at the same time is able to resist the formation of macro cracking. Meanwhile, PPF contributes to the tensile strain capacity and compressive strength, and also delay the formation of micro cracks. Hooked-end deformed type SF fibre with 60 mm length and fibrillated virgin type PPF fibre with 19 mm length are used in this study. Meanwhile, the concrete strength is maintained for grade C30. The percentage proportion of SF-PPF fibres are varied in the range of 100-0%, 75-25%, 50-50%, 25-75% and 0-100% of which the total fibre volume fraction (Vf) is fixed at 0.5%. The experimental results reveal that the percentage proportion of SF-PPF fibres with 75-25% produced the maximum performance of flexural strength, tensile strength and flexural toughness. Meanwhile, the percentage proportion of SF-PPF fibres with 100-0% contributes to the improvement of the compressive strength compared to that of plain concrete.

Sign in / Sign up

Export Citation Format

Share Document