Assessing models for the prediction of mechanical properties for the recycled short fibre composites

2019 ◽  
Vol 38 (10) ◽  
pp. 454-466 ◽  
Author(s):  
Mohammad S Rouhi ◽  
Magdalena Juntikka ◽  
Johan Landberg ◽  
Maciej Wysocki
Keyword(s):  
Mechanical Properties ◽  
Carbon Fibre ◽  
Epoxy Matrix ◽  
Mechanical Performance ◽  
Fibre Production ◽  
Experimental Results ◽  
Carbon Fibre Material ◽  
Stiffness Properties ◽  
Fibre Composites ◽  
Prediction Of Mechanical Properties

Processing of polymer fibre composites has a remarkable influence on their mechanical performance. These mechanical properties are even more influenced when using recycled reinforcement. Therefore, we place particular attention on the evaluation of micromechanical models to estimate the mechanical properties and compare them against the experimental results of the manufactured composites from recycled carbon fibre material. For the manufacturing process, an epoxy matrix and carbon fibre production cut-offs as reinforcing material are incorporated using a vacuum infusion process. In addition, continuous textile reinforcement in combination with the epoxy matrix is used as reference material to evaluate the degradation of mechanical performance of the recycled composite. The experimental results show higher degradation of the composite strength compared to the stiffness properties. Observations from the modelling also show the same trend as the deviation between the theoretical and experimental results is lower for stiffness comparisons than the strength calculations. Yet still, good mechanical performance for specific applications can be expected from these materials.

Using ionic liquids to reduce energy consumption for carbon fibre production

2016 ◽  
Vol 4 (42) ◽  
pp. 16619-16626 ◽  
Author(s):  
Maxime Maghe ◽  
Claudia Creighton ◽  
Luke C. Henderson ◽  
Mickey G. Huson ◽  
Srinivas Nunna ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Ionic Liquids ◽  
Energy Consumption ◽  
Carbon Fibre ◽  
High Performance ◽  
Fibre Production ◽  
Fibre Composites ◽  
Reduce Energy Consumption ◽  
Carbon Fibre Production ◽  
Carbon Fibre Composites

Carbon fibre composites are lightweight, high performance materials with outstanding mechanical properties.

Hybrid silica micro and PDDA/nanoparticles-reinforced carbon fibre composites

2016 ◽  
Vol 51 (6) ◽  
pp. 783-795 ◽  
Author(s):  
Júlio C Santos ◽  
Luciano MG Vieira ◽  
Túlio H Panzera ◽  
André L Christoforo ◽  
Marco A Schiavon ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carbon Fibre ◽  
Silica Nanoparticles ◽  
Fibre Composite ◽  
Flexural Modulus ◽  
Specific Chemical ◽  
Diallyldimethylammonium Chloride ◽  
Fibre Composites ◽  
Carbon Fibre Composites ◽  
Hybrid Carbon

The work describes the manufacturing and testing of novel hybrid epoxy/carbon fibre composites with silica micro and poly-diallyldimethylammonium chloride-functionalised nanoparticles. A specific chemical dispersion procedure was applied using the poly-diallyldimethylammonium chloride to avoid clustering of the silica nanoparticles. The influence of the various manufacturing parameters, particles loading, and mechanical properties of the different phases has been investigated with a rigorous Design of Experiment technique based on a full factorial design (2131). Poly-diallyldimethylammonium chloride-functionalised silica nanoparticles were able to provide a homogenous dispersion, with a decrease of the apparent density and enhancement of the mechanical properties in the hybrid carbon fibre composites. Compared to undispersed carbon fibre composite laminates, the use of 2 wt% functionalised nanoparticles permitted to increase the flexural modulus by 47% and the flexural strength by 15%. The hybrid carbon fibre composites showed also an increase of the tensile modulus (9%) and tensile strength (5.6%).

scholarly journals The Effects of Water and Seawater on the Mechanical Properties of Carbon Fibre Reinforced Epoxy Composite under Pre-Cure Curing Condition

1998 ◽  
Vol 7 (4) ◽  
pp. 096369359800700
Author(s):  
M. Zhang ◽  
S.E. Mason
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Tensile Strength ◽  
Carbon Fibre ◽  
Laminate Composite ◽  
Mechanical Performance ◽  
Epoxy Composite ◽  
Interlaminar Fracture Toughness ◽  
Curing Condition ◽  
Structural Carbon

The influences on the interlaminar fracture toughness (GIC) and ultimate tensile strength (UTS) of a cured structural carbon fibre reinforced epoxy composite of two contaminants, water and seawater, introduced prior to cure have been investigated. The results have demonstrated that the control of environmental factors such as water and seawater can have significant effects on the mechanical performance of laminate composite components during the manufacturing process.

Research Progress on Mechanical Properties of Short Carbon Fibre/Epoxy Composites

2019 ◽  
Vol 12 (1) ◽  
pp. 3-13 ◽  
Author(s):  
Guanghui Zhao ◽  
Jijia Zhong ◽  
Y.X. Zhang
Keyword(s):  
Mechanical Properties ◽  
Carbon Fibre ◽  
Mechanical Performance ◽  
Experimental Studies ◽  
Weight Ratio ◽  
Epoxy Composites ◽  
Experimental Techniques ◽  
Research Progress ◽  
Future Research ◽  
Short Carbon

Background: Short carbon fibre reinforced epoxy composites have many advantages such as high strength-to-weight ratio, corrosion resistance, low cost, short fabrication time and easy manufacturing. Researches on the mechanical performance of the composites are mainly carried out by means of experimental techniques and numerical calculation. Objective: The study aims to report the latest progress in the studies of mechanical properties of short carbon fibre reinforced epoxy composites. Methods: Based on recently published patents and journal papers, the experimental studies of short carbon fibre reinforced epoxy composites are reviewed and the effects of short carbon fibre on the mechanical properties of the composites are discussed. Numerical studies using representative volume element in simulating macroscopic mechanical properties of the short fibre reinforced composites are also reviewed. Finally, future research of short carbon fibre reinforced epoxy composites is proposed. Results: Experimental techniques, experimental results and numerical simulating methods are discussed. Conclusion: Mechanical properties of epoxy can be improved by adding short carbon fibres. Fiber surface treatment and matrix modification are effective in enhancing interfacial adhesion between fiber and matrix, and as a result, better mechanical performance is achieved. Compared to the studies on equivalent mechanical properties of the composites, researches on the micro-mechanism of interaction between fiber and matrix are still in infancy due to the complexity of both the internal structure and reinforcing mechanism.

A Holistic Approach to Use Multi-Scale Fractions of Dry Carbon Fibre Production Waste in Filled Bulk Moulding Compounds (BMC)

2017 ◽  
Vol 742 ◽  
pp. 583-592
Author(s):  
Jonas Huether ◽  
Robert Maertens ◽  
Oleg Saburow ◽  
Elisa Seiler ◽  
Theresa Aicher ◽  
...  
Keyword(s):  
Carbon Fibre ◽  
Mechanical Performance ◽  
Large Fraction ◽  
Holistic Approach ◽  
Fibre Production ◽  
Production Waste ◽  
Textile Processing ◽  
Multi Scale ◽  
Compound Process ◽  
Increasing Demand

The increasing demand for composites leads to a growing amount of end-of-life materialand production waste. The latter consists of a large fraction of unimpregnated fibre waste which is notsufficiently reprocessed using conventional textile processing procedures as they are either too expensiveor their mechanical performance is too low. Using pieces of dry non-crimp fabrics (patches) ina Bulk Moulding Compound process (BMC) displays a straightforward approach of fabric recycling.Adding fillers to the mixture not only offers the opportunity to modify mechanical and electrical propertiesas well as the costs but also a chance for a more holistic approach of dry fibre recycling, whenconventional fillers like chalk are replaced by ground recycled carbon fibres. In this way, all kindof dry fibre wastes can be reused in one process: Larger offcuts are chopped to smaller rectangularpatches whereas waste fractions of small offcuts are processed to carbon fibre powder as filler andprocessed together with resin to produce BMC materials. Mechanical investigations reveal that thepresented approach shows higher specific properties than the conventional filler without compromisingthe process and material quality.

Production and Properties of Glass Fibre-Reinforced Polymer Composites with Nanoparticle Modified Epoxy Matrix

2005 ◽  
Vol 901 ◽  
Author(s):  
Malte H.G. Wichmann ◽  
Florian H. Gojny ◽  
Jan Sumfleth ◽  
Bodo Fiedler ◽  
Karl Schulte
Keyword(s):  
Mechanical Properties ◽  
Glass Fibre ◽  
Epoxy Matrix ◽  
Composite Structures ◽  
Mechanical Performance ◽  
High Potential ◽  
Fatigue Properties ◽  
Ongoing Research ◽  
Volume Fractions ◽  
Glass Fibre Reinforced

AbstractIncreasing the mechanical performance, e.g. strength, toughness and fatigue properties of composites is the objective of many ongoing research projects. Nanoparticles, e.g. carbon nanotubes (CNTs) and fumed silica provide a high potential for the reinforcement of polymers. Their size in the nanometre regime make them suitable candidates for the reinforcement of fibre reinforced polymers, as they may penetrate the reinforcing fibre-network without disturbing the fibre-arrangement.In this work, glass fibre-reinforced epoxy composites with nanoparticle modified matrix systems were produced and investigated. GFRPs containing different volume fractions of the nanofillers were produced via resin transfer moulding. Matrix dominated mechanical properties of the GFRP laminates could be improved by the incorporation of nanoparticles. The addition of only 0.3 wt.% CNTs to the epoxy matrix increased the interlaminar shear strength from 33.4 to 38.7 MPa (+16%). Furthermore, the application of electrically conductive nanoparticles enables the production of conductive nanocomposites. This offers a high potential for antistatic applications and the implementation of functional properties in the composite structures. The effects of different filler types and volume fractions on the electrical properties of the GFRPs were investigated. GFRPs containing 0.3 wt.% of CNTs, for example, exhibit an anisotropic electrical conductivity. Furthermore, an electrical field was applied to the composites during curing. The effects on the resulting electrical and mechanical properties are discussed.

Sign in / Sign up

Export Citation Format

Share Document