Thermal augmentation in solar aircraft using tangent hyperbolic hybrid nanofluid: A solar energy application

2021 ◽  
pp. 0958305X2110366
Author(s):  
Wasim Jamshed
Keyword(s):  
Solar Radiation ◽  
Solar Energy ◽  
Ethylene Glycol ◽  
Numerical Technique ◽  
Surface Friction ◽  
Hybrid Nanofluid ◽  
Heat Transfer Efficiency ◽  
Control Factors ◽  
Tangent Hyperbolic Fluid ◽  
Energy And Momentum

The major source of heat from the sun is solar energy, with enormous use of photovoltaic technology, solar power plates, photovoltaic lights and pumping solar water. This time is about the analysis of solar radiation and how the efficiency of solar aircraft may be improved by using solar radiation and nanotechnology. The study is intended to develop analyses of solar aircraft hybrid nanofluid transfer via parabolic trough surface collector solar wings. Solar radiative flow was named the heat source. The heat transfer efficiency of the wings is evaluated for various phenomena such as a slanted magnetic field, Joule heating, play heat and thermal radiative flow. The entropy production study was carried out in the instance of the tangent hyperbolic fluid. The modelled energy and momentum formulas were controlled with the well-established Keller box numerical technique. This work consists of ethylene glycol standard fluid with two differing types of nanosolid particles copper and silver. Different control factors for velocities, shear stress and temperature are addressed and shown in the figures and tables as well as surface friction and heat transport rate. In terms of thermal transfer, the efficacy of the aviation wings with thermal radiation amplification and changeable thermal conduction parameters is enhanced. Hybrid nanofluid is an ideal source of heat transmission compared to conventional nanofluids. Silver–copper/ethylene glycol thermal efficiency is reduced between 2.6% and 4.4% than copper–ethylene glycol nanofluid.

scholarly journals Characteristic of TiO2-SiO2 Nanofluid With Water/Ethylene Glycol Mixture for Solar Application

2021 ◽  
Vol 81 (2) ◽  
pp. 1-13
Author(s):  
Mohd Amiruddin Fikri ◽  
Wan Mohd Faizal ◽  
Hasyiya Karimah Adli ◽  
Rizalman Mamat ◽  
Wan Hamzah Azmi ◽  
...  
Keyword(s):  
Solar Radiation ◽  
Solar Energy ◽  
Test Tube ◽  
Hybrid Nanofluid ◽  
Heating Period ◽  
Solar Simulator ◽  
Energy Conversion Systems ◽  
Wavelength Radiation ◽  
Hybrid Nanofluids ◽  
Solar Application

Solar energy is a sustainable energy supply technology due to the renewable nature of solar radiation and the ability of solar energy conversion systems to generate greenhouse gas-free heat and electricity during their lifetime. In this study, an experimental investigation was conducted to explore the effect of hybrid nanofluids on heat transfer for solar application. An experiment was conducted for hybrid nanofluid concentrations starting from 0.3, 0.5, 0.7 and 1.0%. Each setup was exposed to short wavelength radiation under a solar simulator with 300, 500 and 700 W/m2 for 30 minutes, of which 15 minutes is the heating period and the next 15 minutes is for cooling. For solar radiation of 300 W/m2 within 15 minutes of charging process are 51.9 °C, 52.8 °C, 53.4 °C and 54.2 °C for concentration of nanofluids 0.3, 0.5, 0.7 and 1.0% respectively. The results for solar radiation of 500 and 700 W/m2 within 15 minutes almost the same pattern which is increasing during the charging process. It can be concluded that the higher concentrations of nanofluid give ample time to the test tube to transfer the heat and thus increased its temperature during the charging process.

Properties of glycerol and ethylene glycol mixture based SiO2-CuO/C hybrid nanofluid for enhanced solar energy transport

2018 ◽  
Vol 179 ◽  
pp. 118-128 ◽  
Author(s):  
Suleiman Akilu ◽  
Aklilu Tesfamichael Baheta ◽  
Mior Azman M.Said ◽  
Alina Adriana Minea ◽  
K.V. Sharma
Keyword(s):  
Solar Energy ◽  
Ethylene Glycol ◽  
Energy Transport ◽  
Hybrid Nanofluid

scholarly journals Detrended Multiple Cross-Correlation Coefficient applied to solar radiation, air temperature and relative humidity

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Andrea de Almeida Brito ◽  
Heráclio Alves de Araújo ◽  
Gilney Figueira Zebende
Keyword(s):  
Relative Humidity ◽  
Solar Radiation ◽  
Solar Energy ◽  
Correlation Coefficient ◽  
Air Temperature ◽  
Cross Correlation ◽  
Global Solar Radiation ◽  
Meteorological Variables ◽  
Hourly Data ◽  
Cross Correlations

AbstractDue to the importance of generating energy sustainably, with the Sun being a large solar power plant for the Earth, we study the cross-correlations between the main meteorological variables (global solar radiation, air temperature, and relative air humidity) from a global cross-correlation perspective to efficiently capture solar energy. This is done initially between pairs of these variables, with the Detrended Cross-Correlation Coefficient, ρDCCA, and subsequently with the recently developed Multiple Detrended Cross-Correlation Coefficient, $${\boldsymbol{DM}}{{\boldsymbol{C}}}_{{\bf{x}}}^{{\bf{2}}}$$DMCx2. We use the hourly data from three meteorological stations of the Brazilian Institute of Meteorology located in the state of Bahia (Brazil). Initially, with the original data, we set up a color map for each variable to show the time dynamics. After, ρDCCA was calculated, thus obtaining a positive value between the global solar radiation and air temperature, and a negative value between the global solar radiation and air relative humidity, for all time scales. Finally, for the first time, was applied $${\boldsymbol{DM}}{{\boldsymbol{C}}}_{{\bf{x}}}^{{\bf{2}}}$$DMCx2 to analyze cross-correlations between three meteorological variables at the same time. On taking the global radiation as the dependent variable, and assuming that $${\boldsymbol{DM}}{{\boldsymbol{C}}}_{{\bf{x}}}^{{\bf{2}}}={\bf{1}}$$DMCx2=1 (which varies from 0 to 1) is the ideal value for the capture of solar energy, our analysis finds some patterns (differences) involving these meteorological stations with a high intensity of annual solar radiation.

scholarly journals Effect of Magnetic Field on the Forced Convective Heat Transfer of Water–Ethylene Glycol-Based Fe3O4 and Fe3O4–MWCNT Nanofluids

2021 ◽  
Vol 11 (10) ◽  
pp. 4683
Author(s):  
Areum Lee ◽  
Chinnasamy Veerakumar ◽  
Honghyun Cho
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Field Strength ◽  
Ethylene Glycol ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Hybrid Nanofluid ◽  
Forced Convective Heat Transfer ◽  
The Magnetic Field

This paper discusses the forced convective heat transfer characteristics of water–ethylene glycol (EG)-based Fe3O4 nanofluid and Fe3O4–MWCNT hybrid nanofluid under the effect of a magnetic field. The results indicated that the convective heat transfer coefficient of magnetic nanofluids increased with an increase in the strength of the magnetic field. When the magnetic field strength was varied from 0 to 750 G, the maximum convective heat transfer coefficients were observed for the 0.2 wt% Fe3O4 and 0.1 wt% Fe3O4–MWNCT nanofluids, and the improvements were approximately 2.78% and 3.23%, respectively. The average pressure drops for 0.2 wt% Fe3O4 and 0.2 wt% Fe3O4–MWNCT nanofluids increased by about 4.73% and 5.23%, respectively. Owing to the extensive aggregation of nanoparticles by the external magnetic field, the heat transfer coefficient of the 0.1 wt% Fe3O4–MWNCT hybrid nanofluid was 5% higher than that of the 0.2 wt% Fe3O4 nanofluid. Therefore, the convective heat transfer can be enhanced by the dispersion stability of the nanoparticles and optimization of the magnetic field strength.

scholarly journals The role of L/W in the solar radiation for Saharian cities

2019 ◽  
Vol 91 ◽  
pp. 05006
Author(s):  
Rami Qaoud ◽  
Alkama Djamal
Keyword(s):  
Solar Radiation ◽  
Solar Energy ◽  
Energy Levels ◽  
Direct Solar Radiation ◽  
Test Field ◽  
Natural Lighting ◽  
The Difference ◽  
The Impact ◽  
The Relationship

The urban fabric of the desert cities is based on the principle of reducing the impact of urban canyons on direct solar radiation. Here comes this research, which is based on a comparative study of the periods of direct solarisation and values of the solar energy of urban canyons via two urban fabrics that have different building densities, where the ratio between L/W is different. In order to obtain the real values of the solar energy (thermal, lighting), the test field was examined every two hours, each three consecutive days. The measurement stations are positioned by the three types of the relationship between L/W, (L≥2w, L=w, L≤0.5w). According to the results, we noticed and recorded the difference in the periods of direct solarization between the types of urban engineering canyons, reaching 6 hours a day, the difference in thermal values of air, reaching 4 °C, and the difference in periods of direct natural lighting, reaching 6 hours. It should be noted that the role of the relationship between L/W is to protect the urban canyons by reducing the impact of direct solar radiation on urban canyons, providing longer hours of shading, and reducing solar energy levels (thermal, lighting) at the urban canyons. This research is classified under the research axis (the studies of external spaces in the urban environment according to the bioclimatic approach and geographic approach). But this research aims to focus on the tracking and studying the distribution of the solar radiation - thermal radiation and lighting radiation - in different types of street canyons by comparing the study of the direct solarization periods of each type and the quantity of solar energy collected during the solarization periods.

Preliminary results on the determination of solar energy potential using LiDAR technology

2015 ◽  
Vol 6 (1) ◽  
pp. 11-17 ◽  
Author(s):  
G. Szabó ◽  
P. Enyedi ◽  
Gy. Szabó ◽  
I. Fazekas ◽  
T. Buday ◽  
...  
Keyword(s):  
Solar Radiation ◽  
Solar Energy ◽  
Energy Production ◽  
Alternative Energy ◽  
Surface Model ◽  
Solar Panels ◽  
Energy Potential ◽  
Potential Surfaces ◽  
Large Power ◽  
Automatic Data

According to the challenge of the reduction of greenhouse gases, the structure of energy production should be revised and the increase of the ratio of alternative energy sources can be a possible solution. Redistribution of the energy production to the private houses is an alternative of large power stations at least in a partial manner. Especially, the utilization of solar energy represents a real possibility to exploit the natural resources in a sustainable way. In this study we attempted to survey the roofs of the buildings with an automatic method as the potential surfaces of placing solar panels. A LiDAR survey was carried out with 12 points/m2 density as the most up-to-date method of surveys and automatic data collection techniques. Our primary goal was to extract the buildings with special regard to the roofs in a 1 km2 study area, in Debrecen. The 3D point cloud generated by the LiDAR was processed with MicroStation TerraScan software, using semi-automatic algorithms. Slopes, aspects and annual solar radiation income of roof planes were determined in ArcGIS10 environment from the digital surface model. Results showed that, generally, the outcome can be regarded as a roof cadaster of the buildings with correct geometry. Calculated solar radiation values revealed those roof planes where the investment for photovoltaic solar panels can be feasible.

The Research of Energy Conversion and Heat Transfer in the Ceramic Foams of Solar Energy Converter

2011 ◽  
Author(s):  
Yangbo Deng ◽  
Fengmin Su ◽  
Chunji Yan
Keyword(s):  
Heat Transfer ◽  
Numerical Model ◽  
Solar Radiation ◽  
Solar Energy ◽  
Numerical Models ◽  
Air Flow ◽  
Energy Converter ◽  
Ceramic Foams ◽  
Numerical Studies ◽  
Flow Through

The solar energy converter in Concentrated Solar Power (CSP) system, applies the solid frame structure of the ceramic foams to receive the concentrated solar radiation, convert it into thermal energy, and heat the air flow through the ceramic foams by convection heat transfer. In this paper, first, the pressure drops in the studied ceramic foams were measured under all kinds of flow condition. Based on the experimental results, an empirical numerical model was built for the air flow through ceramic foams. Second, a 3-D numerical model was built, for the receiving and conversion of the solar energy in the ceramic foams of the solar energy converter. Third, applying two aforementioned numerical models, the numerical studies of the thermal performance were carried out, for the solar energy converter filled with the ceramic foams, and results show that the structure parameters of the ceramic foams, the effective reflective area and the solar radiation intensity of the solar concentrator, have direct impacts on the absorptivity and conversion efficiency of the solar energy in the solar energy converter. And the results of the numerical studies are found to be in reasonable agreement with the experimental measurements. This paper will provide a reference for the design and manufacture of the solar energy converter with the ceramic foams.

Review of empirical solar radiation models for estimating global solar radiation of various climate zones of China

2019 ◽  
Vol 44 (2) ◽  
pp. 168-188
Author(s):  
Shaban G Gouda ◽  
Zakia Hussein ◽  
Shuai Luo ◽  
Qiaoxia Yuan
Keyword(s):  
Solar Radiation ◽  
Solar Energy ◽  
Computational Cost ◽  
Energy Systems ◽  
Global Solar Radiation ◽  
Empirical Models ◽  
Dew Point ◽  
Machine Learning Techniques ◽  
Accurate Information ◽  
Input Parameters

Utilizing solar energy requires accurate information about global solar radiation (GSR), which is critical for designers and manufacturers of solar energy systems and equipment. This study aims to examine the literature gaps by evaluating recent predictive models and categorizing them into various groups depending on the input parameters, and comprehensively collect the methods for classifying China into solar zones. The selected groups of models include those that use sunshine duration, temperature, dew-point temperature, precipitation, fog, cloud cover, day of the year, and different meteorological parameters (complex models). 220 empirical models are analyzed for estimating the GSR on a horizontal surface in China. Additionally, the most accurate models from the literature are summarized for 115 locations in China and are distributed into the above categories with the corresponding solar zone; the ideal models from each category and each solar zone are identified. Comments on two important temperature-based models that are presented in this work can help the researchers and readers to be unconfused when reading the literature of these models and cite them in a correct method in future studies. Machine learning techniques exhibit performance GSR estimation better than empirical models; however, the computational cost and complexity should be considered at choosing and applying these techniques. The models and model categories in this study, according to the key input parameters at the corresponding location and solar zone, are helpful to researchers as well as to designers and engineers of solar energy systems and equipment.

Sign in / Sign up

Export Citation Format

Share Document