Physicochemical properties of chitosan–magnetite nanocomposites obtained with different pH

2021 ◽  
pp. 096739112110384
Author(s):  
Christian Chapa González ◽  
Javier Ulises Navarro Arriaga ◽  
Perla Elvia García Casillas
Keyword(s):  
Zeta Potential ◽  
Physicochemical Properties ◽  
Biomedical Applications ◽  
Spherical Shape ◽  
Polymeric Coating ◽  
X Ray Diffraction ◽  
X Ray ◽  
Coated Nanoparticles ◽  
Nanoparticle Surface ◽  
Magnetite Phase

The physicochemical properties of the nanoparticle surface determine the performance of nanocomposites in biomedical applications such as their biodistribution and pharmacokinetics. The physicochemical properties of chitosan, such as apparent charge density and solubility, are pH dependent. Similarly, Fe3O4 nanoparticles are susceptible to variations in their physicochemical properties due to changes in pH. In this work, we evaluated the physicochemical properties of chitosan–magnetite nanocomposites that were suspended at pH 7.0, 9.0, and 11.0 to determinate the effect on particle size, zeta potential, and mass percentage of the polymeric coating, in addition to the crystalline phase and magnetic properties of magnetite phase. X-ray diffraction results exposed that the present phase was magnetite with no other phases present and that the crystallite size was between 10.8 and 14.1 nm. Fourier transform infrared verified the chitosan functional groups in treated samples while the percentage of mass determined by TGA found to be nearly 9%. Scanning electron microscopy micrographs corroborated the spherical shape of the bare and chitosan-coated nanoparticles. Dynamic light scattering results showed that chitosan coating modifies the zeta potential, going from a potential of −11.8 mV for bare particles to −3.0 mV (pH 11). Besides, vibrating sample magnetometer measurements showed that coercivity remained very low, which is desirable in biomedical applications.

scholarly journals Superparamagnetic Iron Oxide (Fe3O4) Nanoparticles Coated with PEG/PEI for Biomedical Applications: A Facile and Scalable Preparation Route Based on the Cathodic Electrochemical Deposition Method

2017 ◽  
Vol 2017 ◽  
pp. 1-7 ◽  
Author(s):  
Isa Karimzadeh ◽  
Mustafa Aghazadeh ◽  
Taher Doroudi ◽  
Mohammad Reza Ganjali ◽  
Peir Hossein Kolivand
Keyword(s):  
Iron Oxide ◽  
Electrochemical Deposition ◽  
Biomedical Applications ◽  
Superparamagnetic Iron Oxide ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
X Ray ◽  
Electrochemical Deposition Method ◽  
Preparation Route ◽  
Magnetite Phase

Cathodic electrochemical deposition (CED) is introduced as an efficient and effective method for synthesis and surface coating of superparamagnetic iron oxide nanoparticles (SPIONs). In this way, bare Fe3O4 nanoparticles were electrosynthesized through CED method from aqueous solution Fe3+ : Fe2+ chloride (molar ratio of 2 : 1). In the next step, the surface of NPs was coated with polyethyleneimine (PEI) and polyethylene glycol (PEG) during the CED procedure, and PEG/PEI coated SPIONs were obtained. The prepared NPs were evaluated by powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), dynamic light scattering (DLS), vibrating sample magnetometer (VSM), and field-emission scanning electron microscopy (FE-SEM). The pure magnetite phase and nanosize (about 15 nm) of the prepared NPs were confirmed by XRD and FE-SEM. The presence of two coats (i.e., PEG and PEI) on the surface of electrosynthesized NPs was proved via FTIR results. The percentage of polymer coat (37.5%) on the NPs surface was provided by TGA analysis. The high magnetization value, negligible coercivity, and remanence measured by VSM indicate the superparamagnetic nature of both prepared NPs. The obtained results confirmed that the prepared Fe3O4 nanoparticles have suitable physicochemical and magnetic properties for biomedical applications.

scholarly journals Magnetic nanoparticles preparation by chemical reduction for biomedical applications

2019 ◽  
Vol 201 ◽  
pp. 01002
Author(s):  
Zhazgul Kelgenbaeva ◽  
Bektemir Murzubraimov ◽  
Artem Kozlovsky ◽  
Ruslan Adil Akai Tegin ◽  
Ainur Turdubai kyzy ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Biomedical Applications ◽  
Chemical Reduction ◽  
Spherical Shape ◽  
Average Diameter ◽  
Diffraction Field ◽  
X Ray Diffraction ◽  
Spectroscopy Analysis ◽  
Cubic Crystal ◽  
X Ray

This work presents Fe3O4 and AgFe nanoparticles with an average diameter of 25 and 15 nm synthesized by chemical reduction of corresponding salts under a mild condition. Cubic crystal structure and spherical shape of the nanoparticles were studied by X-ray diffraction, Field emission SEM and energy-dispersive spectroscopy analysis. For biomedical applications, the nanoparticles were tested against bacteria E.coli and results revealed AgFe nanoparticles’ antibacterial activity by forming lysis zone in scale of 0.5 mm.

scholarly journals Characterization and Antibacterial Response of Silver Nanoparticles Biosynthesized Using an Ethanolic Extract of Coccinia indica Leaves

Crystals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 97
Author(s):  
Suresh V. Chinni ◽  
Subash C. B. Gopinath ◽  
Periasamy Anbu ◽  
Neeraj Kumar Fuloria ◽  
Shivkanya Fuloria ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Antimicrobial Activity ◽  
Silver Nanoparticles ◽  
Zeta Potential ◽  
Ethanolic Extract ◽  
Spherical Shape ◽  
Bacterial Strains ◽  
X Ray ◽  
Coccinia Indica ◽  
Antibacterial Potential

The present study was planned to characterize and analyze the antimicrobial activity of silver nanoparticles (AgNP) biosynthesized using a Coccinia indica leaf (CIL) ethanolic extract. The present study included the preparation of CIL ethanolic extract using the maceration process, which was further used for AgNP biosynthesis by silver nitrate reduction. Biosynthetic AgNPs were characterized using UV–Visible spectrometry, zeta potential analysis, transmission electron microscopy (TEM), scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffraction (XRD), and energy-dispersive X-ray (EDX) spectrometry. The biogenic AgNP and CIL extracts were further investigated against different bacterial strains for their antimicrobial activity. The surface plasmon resonance (SPR) signal at 425 nm confirmed AgNP formation. The SEM and TEM data revealed the spherical shape of biogenic AgNPs and size in the range of 8 to 48 nm. The EDX results verified the presence of Ag. The AgNPs displayed a zeta potential of −55.46 mV, suggesting mild AgNP stability. Compared to Gram-positive bacteria, the biogenic AgNPs demonstrated high antibacterial potential against Gram-negative bacteria. Based on the results, the current study concluded that AgNPs based on CIL extract have strong antibacterial potential, and it established that AgNP biosynthesis using CIL ethanol extract is an effective process.

scholarly journals Adsorption of malic acid at the hydroxyapatite/aqueous NaCl solution interface

2021 ◽  
Author(s):  
Władysław Janusz ◽  
Ewa Skwarek
Keyword(s):  
Zeta Potential ◽  
Malic Acid ◽  
Particle Sizes ◽  
Nacl Solution ◽  
X Ray Diffraction ◽  
Radioisotope Method ◽  
X Ray ◽  
Solution Interface ◽  
Adsorption Desorption ◽  
Kinetics Of

AbstractThe aim of the study was the basic incidence on the phenomenon of adsorption that occurs at the hydroxyapatite/malic acid interface, leading to a change in the surface properties of hydroxyapatite, Analytical methods used in the research: X-ray diffraction (XRD) as well as by the, adsorption–desorption of nitrogen (ASAP), potentiometric titration. The specific adsorption of malic acid ions at the hydroxyapatite interface was investigated by means of the radioisotope method. The zeta potential of hydroxyapatite dispersions was determined by electrophoresis with Zetasizer Nano ZS90 by Malvern. The particle sizes of hydroxyapatite samples were analyzed using Masteriszer 2000 Malvern. Studies on the kinetics of malic acid on hydroxyapatite from a solution with an initial concentration of 1 mmol/dm3 have shown that the adsorption process is initially fast, followed by a slow adsorption step. An increase in the pH of the solution causes a decrease in the malic acid adsorption as a result of competition with hydroxyl ions. The presence of adsorbed malic acid was confirmed by the FTIR measurements. The effect of malic acid adsorption on the zeta potential and particle size distribution of hydroxyapatite in the NaCl solution was investigated.

scholarly journals Investigation and Modeling of the Electrical Conductivity of Graphene Nanoplatelets-Loaded Doped-Polypyrrole

Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1034
Author(s):  
Oladipo Folorunso ◽  
Yskandar Hamam ◽  
Rotimi Sadiku ◽  
Suprakas Sinha Ray ◽  
Neeraj Kumar
Keyword(s):  
Electrical Conductivity ◽  
Structural Changes ◽  
Spherical Shape ◽  
Graphene Nanoplatelets ◽  
Conductivity Measurements ◽  
X Ray Diffraction ◽  
X Ray ◽  
Thermogravimetric Analyzer ◽  
Energy Storage Applications ◽  
Electrical Conductivity Data

In this study, a hybrid of graphene nanoplatelets with a polypyrrole having 20 wt.% loading of carbon-black (HGPPy.CB20%), has been fabricated. The thermal stability, structural changes, morphology, and the electrical conductivity of the hybrids were investigated using thermogravimetric analyzer, differential scanning calorimeter, X-ray diffraction analyzer, scanning electron microscope, and laboratory electrical conductivity device. The morphology of the hybrid shows well dispersion of graphene nanoplatelets on the surface of the PPy.CB20% and the transformation of the gravel-like PPy.CB20% shape to compact spherical shape. Moreover, the hybrid’s electrical conductivity measurements showed percolation threshold at 0.15 wt.% of the graphene nanoplatelets content and the curve is non-linear. The electrical conductivity data were analyzed by comparing different existing models (Weber, Clingerman and Taherian). The results show that Taherian and Clingerman models, which consider the aspect ratio, roundness, wettability, filler electrical conductivity, surface interaction, and volume fractions, closely described the experimental data. From these results, it is evident that Taherian and Clingerman models can be modified for better prediction of the hybrids electrical conductivity measurements. In addition, this study shows that graphene nanoplatelets are essential and have a significant influence on the modification of PPy.CB20% for energy storage applications.

scholarly journals STARCH MEDIATED SYNTHESIS OF HYDROXYAPATITE NANOPARTICLE FOR BIOMEDICAL APPLICATIONS

2015 ◽  
Vol 2 (1) ◽  
pp. 15-17
Author(s):  
Indira J
Keyword(s):  
Biomedical Applications ◽  
Soluble Starch ◽  
Morphological Properties ◽  
Spherical Nanoparticles ◽  
Hydroxyapatite Nanoparticles ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ft Ir ◽  
Average Size ◽  
Controllable Size

Hydroxyapatite (HAP) nanoparticles with uniform morphologies and controllable size have been synthesized by template directed method. The environment and eco-friendly polysaccharide soluble starch is used as a template to regulate size and shape of the nanoparticles synthesized. Structural and morphological properties of as-synthesized hydroxyapatite nanoparticles have been examined through the techniques like Fourier Transform Infrared Spectroscopy (FT-IR), X-ray Diffraction (XRD) and Scanning Electron Microscopy(SEM), respectively. The results indicate that the obtained particles are uniform discrete spherical nanoparticles. The average size of the hydroxyapatite nanoparticles were ranged from 45 to 60 nm.

Fabrication and Microstructure of Ge-Sb-S-CsCl Chalcogenide Glass Containing β-GeS2 Nanocrystals

2014 ◽  
Vol 665 ◽  
pp. 119-123
Author(s):  
Ji Yan Hao ◽  
Hai Tao Liu
Keyword(s):  
Chalcogenide Glass ◽  
Spherical Shape ◽  
Orthorhombic Phase ◽  
Far Infrared ◽  
X Ray Diffraction ◽  
Base Glass ◽  
X Ray ◽  
Transmission Electron ◽  
Infrared Spectral ◽  
Quenching Method

we report the fabrication and microstructure of Ge-Sb-S-CsCl chalcogenide glass containing β-GeS2 nanocrystals. A Ge-Sb-S-CsCl chalcogenide base glass with the better crystalline ability is first fabricated by melt-quenching method, and a further careful thermal process has led to the formation of β-GeS2 nanocrystals in the glass. Transmission electron microscopy showed that the size of β-GeS2 nanocrystals with nearly monodisperse spherical shape ranges from 30 to 45 nm in the glass. Powder X-ray diffraction results confirm that the β-GeS2 nanocrystals are of high crystallization with orthorhombic phase. Energy dispersive spectroscopy is employed for the information of nanocrystals glass composition. It is worthwhile to note that the obtained Ge-Sb-S-CsCl chalcogenide glass containing β-GeS2 nanocrystals still keeps higher transmittance in mid- and far- infrared spectral region.

scholarly journals Green bio-inspired synthesis, characterization and activity of silver nanoparticle forms of Centaurea virgata Lam. and the isolated flavonoid eupatorin

2018 ◽  
Vol 7 (4) ◽  
pp. 372-379 ◽  
Author(s):  
Burcu Sümer Tüzün ◽  
Judit Hohmann ◽  
Bijen Kivcak
Keyword(s):  
Electron Microscopy ◽  
Zeta Potential ◽  
Synthesis Method ◽  
Gravimetric Analysis ◽  
X Ray Diffraction ◽  
Characteristic Absorption Band ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Diffraction Patterns ◽  
Isolated Compound

AbstractA green synthesis method of silver nanoparticles (AgNPs) usingCentaurea virgataLam. extract and the isolated compound eupatorin was investigated in this study. Ultraviolet-visible (UV-Vis) spectroscopy, Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM), scanning electron microscopy (SEM)/energy-dispersive X-ray (EDX) spectroscopy, thermal gravimetric analysis, X-ray diffraction analysis and zeta potential were used for characterization of AgNPs. The UV-Vis spectrum exhibited a characteristic absorption band at 420 nm for monodisperse nanoparticles. FTIR measurements also proved the formation. X-ray diffraction patterns showed peaks at (110) and (112), which are characteristic for hexagonal crystals and also showed peaks at (111), (200) and (240), which are characteristic for orthorhombic crystals. The TEM images of AgNPs show that the morphology of AgNPs was predominantly spherical. Obtained AgNPs were highly stable according to the zeta potential values. The nitric oxide scavenging activity, which is also related to anticancer activity, of AgNPs was evaluated. It can be concluded thatC. virgataLam. extract and eupatorin can be used as a reducing agent for potential antioxidant AgNP formation.

scholarly journals A novel technique to synthesis of tenorite (CuO) nanoparticles from low concentration CuSO4 solution

2011 ◽  
Vol 47 (1) ◽  
pp. 73-78 ◽  
Author(s):  
E. Darezereshki ◽  
F. Bakhtiari
Keyword(s):  
Electron Microscopy ◽  
Decomposition Method ◽  
Raw Materials ◽  
Spherical Shape ◽  
Cuo Nanoparticles ◽  
X Ray Diffraction ◽  
X Ray ◽  
Thermal Decomposition Method ◽  
Novel Technique ◽  
Transmission Electron

In this study CuO nanoparticles were prepared via direct thermal decomposition method using basic copper sulphates as wet chemically synthesized precursor which was calcined in air at 750?C for 2h. Samples were characterized by thermogravimetric (TG-DSC), X-ray diffraction (XRD), energy dispersive spectroscopy (EDS), infrared spectrum (IR), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The XRD, EDS, and IR results indicated that the synthesized CuO particles were pure. The SEM and TEM results showed that the CuO nanoparticles were of approximate spherical shape, and 170?5 nm in size. Using this method, Cuo nanoparticles could be produced without using organic solvent, expensive raw materials, and complicated equipment.

Copper-based MOF, Cu3(SDBA)2(HSDBA), as catalyst for efficient reduction of 4-nitrophenol in the presence of sodium borohydride

2022 ◽  
Author(s):  
Manel Mansour ◽  
Hamza Kahri ◽  
Mouhieddinne Guergueb ◽  
Houcine Barhoumi ◽  
Enrique Gutierrez-Puebla ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Physicochemical Properties ◽  
Sodium Borohydride ◽  
Solvothermal Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Prepared Sample ◽  
Efficient Reduction ◽  
Scanning Electron

Herein, we report the synthesis of the copper-based MOF, Cu3(SDBA)2(HSDBA), using solvothermal method. The physicochemical properties of the as-prepared sample were examined by X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray...

Sign in / Sign up

Export Citation Format

Share Document