Optimizing tuned mass damper parameters to mitigate the torsional vibration of a suspension bridge under pulse-type ground motion: A sensitivity analysis

2019 ◽  
Vol 26 (11-12) ◽  
pp. 1054-1067 ◽  
Author(s):  
Seyyed Hossein Hossein Lavassani ◽  
Hamed Alizadeh ◽  
Peyman Homami
Keyword(s):  
Sensitivity Analysis ◽  
Torsional Vibration ◽  
Passive Control ◽  
Suspension Bridge ◽  
Tuned Mass Damper ◽  
Gyration Radius ◽  
Suspension Bridges ◽  
Torsional Mode ◽  
Mass Damper ◽  
Pulse Type

Suspension bridges are structures that because of their long span and high flexibility can be prone to ambient vibrations such as ground motions. They can experience high amplitude vibrations in torsional mode during an earthquake, where a vibration control strategy seems necessary. Recently, control systems have been widely used to mitigate vibration of structures. Tuned mass damper is a passive control system. Its performance and effectiveness have been verified both theoretically and practically. In this study, a tuned mass damper system is used to mitigate the torsional vibration of a suspension bridge. The Vincent Thomas suspension bridge is selected as a case study, and its response is reduced by a tuned mass damper under ten pulse-type records from 10 major worldwide earthquakes. By using sensitivity analysis, a parametric study is carried out to optimize tuned mass damper parameters, namely, mass ratio, gyration radius, tuning frequency, and damping ratio according to the maximum reduction of the response maxima. Finally, the optimum range of each parameter that can give the best performance and provide both operational and economic justification for the implementation of the project is suggested. The numerical results indicate that the optimized tuned mass damper system can substantially reduce the maximum response and vibration time.

Vibration control of suspension bridge due to vertical ground motions

2020 ◽  
Vol 23 (12) ◽  
pp. 2626-2641
Author(s):  
Seyed Hossein Hosseini Lavasani ◽  
Hamed Alizadeh ◽  
Rouzbeh Doroudi ◽  
Peyman Homami
Keyword(s):  
Active Control ◽  
Passive Control ◽  
Ground Motions ◽  
Tuned Mass Damper ◽  
Suspension Bridges ◽  
Control Force ◽  
Wide Range ◽  
Mass Damper

Suspension bridges due to their long span can experience large displacement response under dynamic loading like earthquakes. Unlike other structures, their vertical vibration may make remarkable difficulty that a control strategy seems to be essential. Tuned mass damper is a passive control system that can be changed to active one by adding an external source producing the active control force called active tuned mass damper. Unlike passive systems, active ones need a controller system affecting the performance of them considerably. In this study, the efficiency of tuned mass damper and active tuned mass damper are investigated in the bridges. Two controllers, fuzzy type 2 and fuzzy type 1, are used to estimate control force of active tuned mass damper. Tuned mass damper’s parameters are optimized under wide range of ground motions. Also, fuzzy type 2 and fuzzy type 1’s parameters are optimized under the influence of three different conditions containing far-field and near-field ground motions and also combination of them. In addition, Lion Pride Optimization Algorithm is selected for optimizing section. Numerical analysis indicates that active tuned mass damper is more effective than tuned mass damper, and also active tuned mass damper does not make any instability matter of concern in active control systems. Furthermore, performance of fuzzy type 2 is better than fuzzy type 1.

Analysis on vibration control of a large-span pedestrian suspension bridge based on a multiple tuned mass damper system

2019 ◽  
Vol 50 (2) ◽  
pp. 56-63
Author(s):  
Zhen Li ◽  
Dejian Li ◽  
Yao Lu ◽  
Chao Tang
Keyword(s):  
Vibration Control ◽  
Passive Control ◽  
Suspension Bridge ◽  
Element Model ◽  
Tuned Mass Damper ◽  
Load Spectrum ◽  
Large Span ◽  
Pedestrian Bridges ◽  
Mass Damper ◽  
Reduction Effect

Tuned mass damper is one of the commonly used passive control devices. It is the earliest used device in civil engineering control of vibration control of high-rise buildings and towering structures. For large-span pedestrian bridges, the pedestrian load spectrum covers many modalities of pedestrian bridges. It is difficult to achieve the expected results with a single tuned mass damper device. In order to obtain efficient damping, the multiple modes of a multiple tuned mass damper which may resonate under excitation are controlled. This chapter adopts the pedestrian suspension bridge over Dongtan River as the subject to arrange a multiple tuned mass damper system in the finite element model of the pedestrian suspension bridge, analyze the effectiveness of the multiple tuned mass damper system on the control of human-induced vibration of a large-span pedestrian suspension bridge, and discuss the vibration reduction effect of the multiple tuned mass damper system on the response to human-induced vibration of the pedestrian suspension bridge. The analysis shows that a multiple tuned mass damper system has a significant effect on controlling human-induced vibration of the pedestrian suspension bridge.

scholarly journals Lyapunov-Based Control for Suppression of Wind-Induced Galloping in Suspension Bridges

2011 ◽  
Vol 2011 ◽  
pp. 1-23 ◽  
Author(s):  
Naif B. Almutairi ◽  
Mohamed Zribi ◽  
Mohamed Abdel-Rohman
Keyword(s):  
Bridge Deck ◽  
Suspension Bridge ◽  
High Amplitude ◽  
Tuned Mass Damper ◽  
Suspension Bridges ◽  
Control Force ◽  
Controlled System ◽  
Mass Damper ◽  
Suspended Cables ◽  
Simulation Results

This paper investigates the suppression of galloping in a suspension bridge due to wind loads. The galloping phenomenon can be destructive due to the high-amplitude oscillations of the structure. Two controllers are proposed to generate the control force needed to suppress the vertical galloping in the suspended cables and in the bridge deck. SIMULINK software is used to simulate the controlled system. The simulation results indicate that the proposed controllers work well. In addition, the performance of the system with the proposed controllers is compared to the performance of the system controlled with a tuned mass damper.

Torsional Vibration Control of High-Rise Building with Large Local Space by Using Tuned Mass Damper

2012 ◽  
Vol 446-449 ◽  
pp. 3066-3071 ◽  
Author(s):  
Bin Zhao ◽  
Hui Gao
Keyword(s):  
Vibration Control ◽  
Torsional Vibration ◽  
Time History ◽  
Tuned Mass Damper ◽  
Earthquake Excitation ◽  
Torsional Mode ◽  
Seismic Safety ◽  
History Analysis ◽  
Mass Damper ◽  
Local Space

According to the shake table test results of a high-rising building with large local space, the dynamic characteristics of such structure are complex and the torsional mode becomes the first mode, while the torsional responses under earthquake excitation, especially of the floor just above the large local space, are very remarkable. Special measures are required for such structural system for maintaining its seismic safety. In this research, the bidirectional Tuned Mass Damper (TMD) is employed for reducing the torsional vibration of the high-rising building with large local space. The optimization of the TMD parameters, such as natural frequency, damping ratios and mass ratio, is performed. The time history analysis results indicate that the proposed bidirectional TMD is very effective in torsional vibration control.

scholarly journals A Multi-Degree of Freedom Tuned Mass Damper Design for Vibration Mitigation of a Suspension Bridge

2020 ◽  
Vol 10 (2) ◽  
pp. 457 ◽  
Author(s):  
Fanhao Meng ◽  
Jiancheng Wan ◽  
Yongjun Xia ◽  
Yong Ma ◽  
Jingjun Yu
Keyword(s):  
Structural Response ◽  
Suspension Bridge ◽  
Tuned Mass Damper ◽  
Degree Of Freedom ◽  
Suspension Bridges ◽  
Synthetic Approach ◽  
Compliance Matrix ◽  
Flexible Beams ◽  
Concept Model ◽  
Mass Damper

This paper proposes a synthetic approach to design and implement a two-degree of freedom tuned mass damper (2DOFs TMD), aimed at damping bending and torsional modes of bridge decks (it can also be applied to other types of bridges like cable-stayed bridges to realize the energy dissipation). For verifying the effectiveness of the concept model, we cast the parameter optimization of the 2DOFs TMDs conceptual model as a control problem with decentralized static output feedback for minimizing the response of the bridge deck. For designing the expected modes of the 2DOFs TMDs, the graphical approach was introduced to arrange flexible beams properly according to the exact constraints. Based on the optimized frequency ratios, the dimensions of 2DOF TMDs are determined by the compliance matrix method. Finally, the mitigation effect was illustrated and verified by an experimental test on the suspension bridge mock-up. The results showed that the 2DOFs TMD is an effective structural response mitigation device used to mitigate the response of suspension bridges. It was also observed that based on the proposed synthetic approach, 2DOFs TMD parameters can be effectively designed to realize the target modes control.

Determination of optimal parameters of the tuned mass damper to reduce the torsional vibration of the shaft by using the principle of minimum kinetic energy

2018 ◽  
Vol 233 (2) ◽  
pp. 327-335 ◽  
Author(s):  
Duy-Chinh Nguyen
Keyword(s):  
Kinetic Energy ◽  
Torsional Vibration ◽  
Damping Ratio ◽  
Vibration Reduction ◽  
Tuned Mass Damper ◽  
Optimal Parameters ◽  
Lagrangian Equations ◽  
Tuning Ratio ◽  
Mass Damper

In this paper, an analytical method is presented to determine the optimal parameters of the symmetric tuned mass damper, such as the ratio between natural frequency of tuned mass damper and shaft (tuning ratio) and the ratio of the viscous coefficient of tuned mass damper (damping ratio). The optimal parameters of tuned mass damper are applied to reduce the torsional vibration of the shaft based on consideration of the vibration duration and stability criterion. The dynamic equations of the shaft are provided via Lagrangian equations, and the optimal parameters of tuned mass damper are derived by using the principle of minimum kinetic energy. Analytical and numerical examples are implemented to verify the reliability of the proposed method. The analytical and numerical results indicate that the optimal parameters of tuned mass damper have significant effects in the torsional vibration reduction of the shaft.

scholarly journals Seismic Performance Analysis of a Connected Multitower Structure with FPS and Viscous Damper

2018 ◽  
Vol 2018 ◽  
pp. 1-19 ◽  
Author(s):  
Xiaohan Wu ◽  
Jun Wang ◽  
Jiangyong Zhou
Keyword(s):  
Seismic Behavior ◽  
Passive Control ◽  
Time History ◽  
Tuned Mass Damper ◽  
Seismic Excitations ◽  
History Analysis ◽  
Mass Damper ◽  
Tower Structure ◽  
Design Requirements ◽  
Friction Pendulum

A high four-tower structure is interconnected with a long sky corridor bridge on the top floor. To reduce the earthquake responses and member forces of the towers and sky corridor bridge, a passive control strategy with a friction pendulum tuned mass damper (FPTMD) was adopted. The sky corridor bridge was as the mass of FPTMD. The connection between the towers and the sky corridor bridge was designed as flexible links, where friction pendulum bearings (FPBs) and viscous dampers were installed. Elastoplastic time-history analysis was conducted by using Perform-3D model to look into its seismic behavior under intensive seismic excitation. The optimal design of the FPTMD with varying friction coefficients and radius of friction pendulum bearing (FPB) under seismic excitations was carried out, and the seismic behavior of the structure was also investigated at the same time.Results show that, for this four-tower connected structure, the friction pendulum tuned mass damper (FPTMD) has very well effect on seismic reduction. The structure can meet the seismic resistance design requirements.

Analytical analysis for the design of nonlinear tuned mass damper

2020 ◽  
Vol 26 (9-10) ◽  
pp. 646-658
Author(s):  
Lu-yu Li ◽  
Tianjiao Zhang
Keyword(s):  
Passive Control ◽  
Design Method ◽  
Tuned Mass Damper ◽  
Control Device ◽  
Control Performance ◽  
Tuned Mass Dampers ◽  
Mass Damper ◽  
Practical Engineering ◽  
Optimum Formula ◽  
Nonlinear Tuned Mass Damper

A tuned mass damper is a passive control device that has been widely used in aerospace, mechanical, and civil engineering as well as many other fields. Tuned mass dampers have been studied and improved over the course of many years. In practical engineering applications, a tuned mass damper inevitably produces some nonlinear characteristics due to the large displacement and the use of the limiting devices, but this nonlinearity is often neglected. The simulation results in this study confirm that neglecting the nonlinearity in the design process can produce adverse effects on the control performance. This paper takes into account the nonlinearity of the tuned mass damper produced in the process of vibration and deduces an optimum formula for the frequency of a tuned mass damper by the complexification averaging method and multiscale method. Based on this formula, a modified design method for the frequency of a tuned mass damper is presented. The numerical results show that the nonlinear tuned mass damper after modification is better than a linear tuned mass damper in terms of control performance.

Three-Element Vibration Absorber–Inerter for Passive Control of Single-Degree-of-Freedom Structures

2018 ◽  
Vol 140 (6) ◽  
Author(s):  
Abdollah Javidialesaadi ◽  
Nicholas E. Wierschem
Keyword(s):  
Passive Control ◽  
Translational Motion ◽  
Tuned Mass Damper ◽  
Degree Of Freedom ◽  
Superior Performance ◽  
Underlying Structure ◽  
Vibration Absorber ◽  
Single Degree Of Freedom ◽  
Single Degree ◽  
Mass Damper

In this study, a novel passive vibration control device, the three-element vibration absorber–inerter (TEVAI) is proposed. Inerter-based vibration absorbers, which utilize a mass that rotates due to relative translational motion, have recently been developed to take advantage of the potential high inertial mass (inertance) of a relatively small mass in rotation. In this work, a novel configuration of an inerter-based absorber is proposed, and its effectiveness at suppressing the vibration of a single-degree-of-freedom system is investigated. The proposed device is a development of two current passive devices: the tuned-mass-damper–inerter (TMDI), which is an inerter-base tuned mass damper (TMD), and the three-element dynamic vibration absorber (TEVA). Closed-form optimization solutions for this device connected to a single-degree-of-freedom primary structure and loaded with random base excitation are developed and presented. Furthermore, the effectiveness of this novel device, in comparison to the traditional TMD, TEVA, and TMDI, is also investigated. The results of this study demonstrate that the TEVAI possesses superior performance in the reduction of the maximum and root-mean-square (RMS) response of the underlying structure in comparison to the TMD, TEVA, and TMDI.

Sign in / Sign up

Export Citation Format

Share Document