scholarly journals Improved Reduction of the Tibiofibular Syndesmosis with Tightrope Compared to Screw Fixation

2018 ◽  
Vol 3 (3) ◽  
pp. 2473011418S0012 ◽  
Author(s):  
Michel Taylor ◽  
David Sanders ◽  
Christina Tieszer

Category: Trauma Introduction/Purpose: Flexible fixation of the tibio-fibular syndesmosis is designed to allow increased ankle motion and to potentially improve clinical outcomes compared to screw fixation. Flexible fixation has also been suggested to improve the rate of anatomic reduction. This randomized, multi-center study was designed to compare the rate of malreduction following treatment of high fibular fractures associated with syndesmosis injury with open reduction and internal fixation with either two fully threaded screws or one knotless Tightrope device. Methods: 101 patients from eleven sites were randomized and underwent operative fixation of their AO/OTA 44-C injury between June 2015-16. All patients demonstrated radiographic syndesmosis diastasis or instability following malleolar bony fixation. Open syndesmosis reduction was performed in all cases. Fixation was randomized to either Tightrope (T) or screws (S). Surgical techniques and rehabilitation were standardized. Follow-up at 2 and 6 weeks, 3, 6 and 12 months. The primary outcome measure was the rate of malreduction based on bilateral ankle CT scan results at 3 months post fixation. Secondary outcome measures included adverse events, reoperation, and validated functional outcomes including the EQ5D, OM Score, FADI, and WPAI. The estimated sample size required to detect a difference in reduction rate was 72 patients, but the estimated sample size required to detect a difference in functional outcome scores was 240 patients, suggesting the study was adequately powered for radiographic results only. Results: The rate of malreduction was 39% using screws compared to 15% using Tightrope (p = 0.028). Analysis of CT results was performed using a 2 mm translation or 10 degree rotation threshold for malreduction, and included fibular translation, syndesmosis distance, medial compression; and rotation. Patients in Group T had greater anterior translation compared to the contralateral limb (p=0.007) or Group S (p = 0.04). Group T syndesmoses also had greater diastasis compared to control limb (p=.005) and less fibular medialization compared to Group S (p = 0.05). Functional outcome measures demonstrated significant improvements but no differences between groups. FADI scores at each time interval were equivalent. The reoperation rate was higher in the screw group compared to Tightrope (30% vs 4%, p= 0.02). Conclusion: Treatment of tibio-fibular syndesmosis injury with the knotless flexible Tightrope device achieves lower rates of malreduction and reoperation compared to screw fixation.

2021 ◽  
pp. 107110072199000
Author(s):  
Al-Walid Hamam ◽  
Moaz Bin Yunus Chohan ◽  
Christina Tieszer ◽  
Abdel-Rahman Lawendy ◽  
Christopher Del Balso ◽  
...  

Background: The goal of the study was to compare radiographic and functional outcomes between conventional closed syndesmotic reduction and screw fixation with open reduction, direct repair of the anterior inferior tibiofibular ligament (AiTFL) and screw fixation. We hypothesized that open reduction with restoration of the AiTFL would provide an improved reduction with better radiographic and functional outcomes. Methods: Fifty consecutive patients with OTA 44-C ankle fractures were enrolled. Treatment was nonrandomized and based on surgeon preference. Patients were treated with either open reduction, suture-anchor AiTFL repair, and screw fixation (ART group), or conventional closed reduction of the syndesmosis followed by screw fixation (CR group). The primary outcome measure was anteroposterior (AP) displacement of the fibula on CT scan at 3 months postoperatively. Secondary outcome measures included the Maryland Foot Score, the American Orthopaedic Foot & Ankle Society (AOFAS) Ankle Hindfoot Score, and the Foot and Ankle Outcome Score (FAOS). Results: Mean AP difference between injured and noninjured ankles was decreased in the ART group compared with the CR group (0.7 ± 0.3 mm vs 1.5 ± 0.3 mm, P = .008). No differences were observed between groups in overall scores for secondary outcome measures. The ART group displayed a significant difference in Maryland Foot Shoe subscore at 12 months (ART = 9.5 vs CR = 8.3, P = .03) and FAOS Quality of Life subscore at 12 months (64.1 compared to 38.3, P = .04). Conclusions: Open anatomic syndesmotic repair resulted in improved radiographic outcomes compared with closed reduction. Cosmesis was worse at 6 weeks compared to the CR group; however, quality of life and shoewear were improved in the ART group at 1 year postoperatively. Level of Evidence: Level II, prospective comparative study.


2018 ◽  
Vol 46 (5) ◽  
pp. 1106-1113 ◽  
Author(s):  
Martin Kroslak ◽  
George A.C. Murrell

Background: A number of surgical techniques for managing tennis elbow have been described. One of the most frequently performed involves excising the affected portion of the extensor carpi radialis brevis (ECRB). The results of this technique, as well as most other described surgical techniques for this condition, have been reported as excellent, yet none have been compared with placebo surgery. Hypothesis: The surgical excision of the degenerative portion of the ECRB offers no additional benefit over and above placebo surgery for the management of chronic tennis elbow. Study Design: Randomized controlled trial; Level of evidence, 2. Methods: This study investigated surgical excision of the macroscopically degenerated portion of the ECRB (surgery; n = 13) as compared with skin incision and exposure of the ECRB alone (sham; n = 13) to treat patients who had tennis elbow for >6 months and had failed at least 2 nonsurgical modalities. The primary outcome measure was defined as patient-rated frequency of elbow pain with activity at 6 months after surgery. Secondary outcome measures included patient-rated pain and functional outcomes, range of motion, epicondyle tenderness, and strength at 6 months and 2.5 years. All outcome measures up to and including the 6-month follow-up were measured in person; the longer-term questionnaire was conducted in person or over the phone. Results: The 2 groups, surgery and sham, were similar for age, sex, hand dominance, and duration of symptoms. Both procedures improved patient-rated pain frequency and severity, elbow stiffness, difficulty with picking up objects, difficulty with twisting motions, and overall elbow rating >6 months and at 2.5 years ( P < .01). Both procedures also improved epicondyle tenderness, pronation-supination range, grip strength, and modified Orthopaedic Research Institute–Tennis Elbow Testing System at 6 months ( P < .05). No significant difference was observed between the groups in any parameter at any stage. No side effects or complications were reported. The study was stopped before the calculated number of patients were enrolled (40 per group); yet, a post hoc futility analysis was conducted that showed, based on the magnitude of the differences between the groups, >6500 patients would need to be recruited per group to see a significant difference between the groups at 26 weeks in the primary outcome (patient-rated frequency of elbow pain with activity). Conclusion: With the number of available participants, this study failed to show additional benefit of the surgical excision of the degenerative portion of the ECRB over placebo surgery for the management of chronic tennis elbow.


2017 ◽  
Vol 2 (3) ◽  
pp. 2473011417S0000
Author(s):  
Bi O Jeong ◽  
Jong Hun Baek ◽  
Wookjae Song

Category: Ankle, Trauma Introduction/Purpose: Transfixing screw fixation is required after anatomic reduction of syndesmosis disruption. An accurate anatomic reduction is related to good functional outcome. However, there is a dispute over whether the transfixing screw should be removed, and little is known about the change of syndesmosis integrity after screw removal. This study aimed to evaluate the effect of transfixing screw removal on syndesmosis integrity with computed tomography (CT) scans. Methods: The study was done prospectively on 28 cases (28 patients) who had transfixing screw fixation for syndesmosis injury from September 2010 to August 2016. Mean age was 31.9 years (range, 17 to 55 years). There were 20 male patients and 8 female patients. Transfixing screws were removed after 3 months, and CT scans were done just before and 3 months after transfixing screw removal. Anterior and posterior measurement ratio (A/P ratio) of the syndesmosis was measured on axial CT images for radiological analysis of changes in syndesmosis integrity between before and after screw removal. Results: Malreduction was observed in 7 cases (25%) before transfixing screw removal. All 7 cases were anterior malreductions. Syndesmosis was spontaneously reduced after screw removal in 5 out of the 7 malreduction cases (71.4%). The A/P ratio in the 7 cases decreased from average 1.37 (range, 1.25 to 1.61) before screw removal to average 1.12 (range, 0.96 to 1.25) after screw removal. The decrease was statistically significant (p = 0.016). Syndesmosis malreduction rate decreased from 25% before screw removal to 7.1% after screw removal. All patients with adequate reduction of their syndesmosis continued to have a reduced syndesmosis after transfixing screw removal. However, this difference in malreduction rate was statistically insignificant (p=0.063). Conclusion: Although the malreduction rate is relatively high after transfixing screw fixation in disrupted syndesmosis, the malreduced syndesmosis was spontaneously reduced in 71% of cases after screw removal. Therefore, it is beneficial to remove the transfixing screw a certain period of time after transfixing screw fixation to achieve anatomic reduction of the syndesmosis.


BMJ Open ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. e045886
Author(s):  
Yiying Hu ◽  
Jianying Guo ◽  
Guanqiao Li ◽  
Xi Lu ◽  
Xiang Li ◽  
...  

ObjectivesThis study quantified how the efficiency of testing and contact tracing impacts the spread of COVID-19. The average time interval between infection and quarantine, whether asymptomatic cases are tested or not, and initial delays to beginning a testing and tracing programme were investigated.SettingWe developed a novel individual-level network model, called CoTECT (Testing Efficiency and Contact Tracing model for COVID-19), using key parameters from recent studies to quantify the impacts of testing and tracing efficiency. The model distinguishes infection from confirmation by integrating a ‘T’ compartment, which represents infections confirmed by testing and quarantine. The compartments of presymptomatic (E), asymptomatic (I), symptomatic (Is), and death with (F) or without (f) test confirmation were also included in the model. Three scenarios were evaluated in a closed population of 3000 individuals to mimic community-level dynamics. Real-world data from four Nordic countries were also analysed.Primary and secondary outcome measuresSimulation result: total/peak daily infections and confirmed cases, total deaths (confirmed/unconfirmed by testing), fatalities and the case fatality rate. Real-world analysis: confirmed cases and deaths per million people.Results(1) Shortening the duration between Is and T from 12 to 4 days reduces infections by 85.2% and deaths by 88.8%. (2) Testing and tracing regardless of symptoms reduce infections by 35.7% and deaths by 46.2% compared with testing only symptomatic cases. (3) Reducing the delay to implementing a testing and tracing programme from 50 to 10 days reduces infections by 35.2% and deaths by 44.6%. These results were robust to sensitivity analysis. An analysis of real-world data showed that tests per case early in the pandemic are critical for reducing confirmed cases and the fatality rate.ConclusionsReducing testing delays will help to contain outbreaks. These results provide policymakers with quantitative evidence of efficiency as a critical value in developing testing and contact tracing strategies.


Hand ◽  
2021 ◽  
pp. 155894472097411
Author(s):  
Luke T. Nicholson ◽  
Kristen M. Sochol ◽  
Ali Azad ◽  
Ram Kiran Alluri ◽  
J. Ryan Hill ◽  
...  

Background: Management of scaphoid nonunions with bone loss varies substantially. Commonly, internal fixation consists of a single headless compression screw. Recently, some authors have reported on the theoretical benefits of dual-screw fixation. We hypothesized that using 2 headless compression screws would impart improved stiffness over a single-screw construct. Methods: Using a cadaveric model, we compared biomechanical characteristics of a single tapered 3.5- to 3.6-mm headless compression screw with 2 tapered 2.5- to 2.8-mm headless compression screws in a scaphoid waist nonunion model. The primary outcome measurement was construct stiffness. Secondary outcome measurements included load at 1 and 2 mm of displacement, load to failure for each specimen, and qualitative assessment of mode of failure. Results: Stiffness during load to failure was not significantly different between single- and double-screw configurations ( P = .8). Load to failure demonstrated no statistically significant difference between single- and double-screw configurations. Using a qualitative assessment, the double-screw construct maintained rotational stability more than the single-screw construct ( P = .029). Conclusions: Single- and double-screw fixation constructs in a cadaveric scaphoid nonunion model demonstrate similar construct stiffness, load to failure, and load to 1- and 2-mm displacement. Modes of failure may differ between constructs and represent an area for further study. The theoretical benefit of dual-screw fixation should be weighed against the morphologic limitations to placing 2 screws in a scaphoid nonunion.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Kyoungwon Baik ◽  
Seon Myeong Kim ◽  
Jin Ho Jung ◽  
Yang Hyun Lee ◽  
Seok Jong Chung ◽  
...  

AbstractWe investigated the efficacy of donepezil for mild cognitive impairment in Parkinson’s disease (PD-MCI). This was a prospective, non-randomized, open-label, two-arm study. Eighty PD-MCI patients were assigned to either a treatment or control group. The treatment group received donepezil for 48 weeks. The primary outcome measures were the Korean version of Mini-Mental State Exam and Montreal Cognitive Assessment scores. Secondary outcome measures were the Clinical Dementia Rating, Unified Parkinson’s Disease Rating Scale part III, Clinical Global Impression scores. Progression of dementia was assessed at 48-week. Comprehensive neuropsychological tests and electroencephalography (EEG) were performed at baseline and after 48 weeks. The spectral power ratio of the theta to beta2 band (TB2R) in the electroencephalogram was analyzed. There was no significant difference in the primary and secondary outcome measures between the two groups. However, the treatment group showed a significant decrease in TB2R at bilateral frontotemporoparietal channels compared to the control group. Although we could not demonstrate improvements in the cognitive functions, donepezil treatment had a modulatory effect on the EEG in PD-MCI patients. EEG might be a sensitive biomarker for detecting changes in PD-MCI after donepezil treatment.


Cancers ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 2398
Author(s):  
Matteo Serenari ◽  
Enrico Prosperi ◽  
Marc-Antoine Allard ◽  
Michele Paterno ◽  
Nicolas Golse ◽  
...  

Hepatic resection (HR) for hepatocellular carcinoma (HCC) may require secondary liver transplantation (SLT). However, a previous HR is supposed to worsen post-SLT outcomes. Data of patients treated by SLT between 2000 and 2018 at two tertiary referral centers were analyzed. The primary outcome of the study was to analyze the impact of HR on post-LT complications. A Comprehensive Complication Index ≥ 29.6 was chosen as cutoff. The secondary outcome was HCC-related death by means of competing-risk regression analysis. In the study period, 140 patients were included. Patients were transplanted in a median of 23 months after HR (IQR 14–41). Among all the features analyzed regarding the prior HR, only time interval between HR and SLT (time HR-SLT) was an independent predictor of severe complications after LT (OR = 0.98, p < 0.001). According to fractional polynomial regression, the probability of severe complications increased up to 15 months after HR (43%), then slowly decreased over time (OR = 0.88, p < 0.001). There was no significant association between HCC-related death and time HR-SLT at the multivariable competing risks regression model (SHR, 1.06; 95% CI: 0.69–1.62, p = 0.796). This study showed that time HR-SLT was key in predicting complications after LT, without affecting HCC-related death.


2021 ◽  
pp. 105566562110131
Author(s):  
Farrukh R. Virani ◽  
Evan C. Chua ◽  
Mary Roz Timbang ◽  
Tsung-yen Hsieh ◽  
Craig W. Senders

Objective: To determine the current applications of 3-dimensional (3D) printing in the care of patients with cleft lip and palate. We also reviewed 3D printing limitations, financial analysis, and future implications. Design: Retrospective systematic review. Methods: Preferred Reporting Items for Systematic Reviews and Meta-analyses guidelines were used by 3 independent reviewers. Articles were identified from Cochrane library, Ovid Medline, and Embase. Search terms included 3D printing, 3 dimensional printing, additive manufacturing, rapid prototyping, cleft lip, and cleft palate. Exclusion criteria included articles not in English, animal studies, reviews without original data, oral presentations, abstracts, opinion pieces, and articles without relevance to 3D printing or cleft lip and palate. Main Outcome Measures: Primary outcome measure was the purpose of 3D printing in the care of patients with cleft lip and palate. Secondary outcome measures were cost analysis and clinical outcomes. Results: Eight-four articles were identified, and 39 met inclusion/exclusion criteria. Eleven studies used 3D printing models for nasoalveolar molding. Patient-specific implants were developed via 3D printing in 6 articles. Surgical planning was conducted via 3D printing in 8 studies. Eight articles utilized 3D printing for anatomic models/educational purposes. 3-Dimensional printed models were used for surgical simulation/training in 6 articles. Bioprinting was utilized in 4 studies. Secondary outcome of cost was addressed in 8 articles. Conclusion: 3-Dimensional printing for the care of patients with cleft lip and palate has several applications. Potential advantages of utilizing this technology are demonstrated; however, literature is largely descriptive in nature with few clinical outcome measures. Future direction should be aimed at standardized reporting to include clinical outcomes, cost, material, printing method, and results.


2021 ◽  
pp. bmjnph-2020-000225
Author(s):  
Jennifer Griffin ◽  
Anwar Albaloul ◽  
Alexandra Kopytek ◽  
Paul Elliott ◽  
Gary Frost

ObjectiveTo examine the effect of the consumption of ultraprocessed food on diet quality, and cardiometabolic risk (CMR) in an occupational cohort.DesignCross-sectional.SettingOccupational cohort.Participants53 163 British police force employees enrolled (2004–2012) into the Airwave Health Monitoring Study. A total of 28 forces across the UK agreed to participate. 9009 participants with available 7-day diet record data and complete co-variate data are reported in this study.Main outcome measuresA CMR and Dietary Approaches to Stop Hypertension score were treated as continuous variables and used to generate measures of cardiometabolic health and diet quality. Secondary outcome measures include percentage of energy from fat, saturated fat, carbohydrate, protein and non-milk extrinsic sugars (NMES) and fibre grams per 1000 kcal of energy intake.ResultsIn this cohort, 58.3%±11.6 of total energy intake was derived from ultraprocessed (NOVA 4) foods. Ultraprocessed food intake was negatively correlated with diet quality (r=−0.32, p<0.001), fibre (r=−0.20, p<0.001) and protein (r = −0.40, p<0.001) and positively correlated with fat (r=0.18, p<0.001), saturated fat (r=0.14, p<0.001) and nmes (r=0.10, p<0.001) intake . Multivariable analysis suggests a positive association between ultraprocessed food (NOVA 4) consumption and CMR. However, this main effect was no longer observed after adjustment for diet quality (p=0.209). Findings from mediation analysis indicate that the effect of ultraprocessed food (NOVA 4) intake on CMR is mediated by diet quality (p<0.001).ConclusionsUltraprocessed food consumption is associated with a deterioration in diet quality and positively associated with CMR, although this association is mediated by and dependent on the quality of the diet. The negative impact of ultraprocessed food consumption on diet quality needs to be addressed and controlled studies are needed to fully comprehend whether the relationship between ultraprocessed food consumption and health is independent to its relationship with poor diet quality.


Sign in / Sign up

Export Citation Format

Share Document