Thermal behaviour of ‘metamorphic vermiculite’ in Ca-rich ancient ceramic sherds and experimental ceramics

2010 ◽  
Vol 74 (4) ◽  
pp. 747-771 ◽  
Author(s):  
C. Rathossi ◽  
P. Tsolis-Katagas ◽  
C. Katagas

AbstractA ‘metamorphic vermiculite’-like phase was identified in Ca-rich ancient ceramic sherds from excavations in NW Peloponnese, Greece. Archaeometric investigations have shown that the raw materials used in the production of ancient ceramics were derived from local Plio-Pleistocene sediments. Analysis by X-ray diffraction and scanning electron microscopy-energy dispersive spectroscopy showed that ‘metamorphic vermiculite’ is a common constituent phase of these sediments occurring in three texturally different types: as interstratified white mica-chlorite and chlorite-vermiculite, and white mica-(white mica-chlorite) stacks. In an attempt to elucidate the thermal transformation of ‘metamorphic vermiculite’ present in the calcareous raw materials, we produced experimental ceramics made from these local raw materials and fired them at 700, 750, 850, 950 and 1050°C in a static air furnace. The mixed-layered chlorite-vermiculite was transformed completely at ∼800°C contributing to the formation of new high-Tminerals. The two other types of ‘metamorphic vermiculite’ retain their original lath-like shape up to 1050°C and only a few crystals show that they have undergone complete transformation at this temperature. In the latter crystals, numerous nanocrystals were formed sub-parallel to the former cleavages of ‘metamorphic vermiculite’ pseudomorphs, suggesting their contribution to the nucleation of high-Tminerals (i.e. ferrian aluminian diopside, spinel, Fe oxides) by reactions with the available CaO. It is suggested that the firing conditions (i.e. maximum reaction temperature of 1050°C, reaction time of 1 h, oxygen atmosphere) which promote disequilibrium reactions, and the greater contribution of the white mica constituent against chlorite in some of the initial structures of ‘metamorphic vermiculite’ may be responsible for the delay of its thermal decomposition at 1050°C.

Geosciences ◽  
2019 ◽  
Vol 9 (4) ◽  
pp. 172 ◽  
Author(s):  
Michela Ricca ◽  
Giuseppe Paladini ◽  
Natalia Rovella ◽  
Silvestro Antonio Ruffolo ◽  
Luciana Randazzo ◽  
...  

This work focused on the study of decorated pottery dated back to the 16th century from the Roman archaeological site of Villa dei Quintili, a monumental complex located in the south-eastern part of Rome (Italy). A minero-petrographic and geochemical study was undertaken to analyse five archaeological samples in order to define textural features and raw materials used for their production, along with the chemical and physical composition of the superficial decorative glazed coatings. For this purpose, different analytical methods were used, such as polarising optical microscope (POM), X-ray diffraction (XRD), micro-Raman spectroscopy, X-Ray fluorescence (XRF), and electron microprobe analysis coupled with energy dispersive spectrometry (EMPA-EDS). The results of such a multidisciplinary approach allowed us to achieve important results crucial to recognise the shards as majolica of the Renaissance period, improving knowledge about manufacturing processes of these renowned painted ceramic artefacts.


Gels ◽  
2021 ◽  
Vol 7 (4) ◽  
pp. 251
Author(s):  
Oana-Cătălina Mocioiu ◽  
Irina Atkinson ◽  
Ana-Maria Mocioiu ◽  
Simona Neagu ◽  
Robert Ruginescu ◽  
...  

One of the current research objectives is the development of new films for the conservation of glass heritage objects. The value of historical glass objects is given by the technology and raw materials used in production as well as their transparency and color. Their colors are correlated with oxide composition rich in transitional metals, which decrease resistance of corrosive agents from the atmosphere. In this paper, SiO2-ZnO gels have been designed to protect historical glass objects. The sol–gel method used to obtain gels is a powerful tool for functionalizing different materials. An important functionalization is the antibacterial activity. By applying a gel, the coated material is able to decrease the growth of bacteria. After deposition, some gels must be strengthened by heat treatment. The effect of ZnO content (10 mol% and 20 mol%) on the properties of the studied gels was investigated by Differential scanning calorimetry (DSC), Fourier transform infrared (FTIR), X-ray diffraction (XRD), Scanning electron microscopy (SEM), and antibacterial tests. Escherichia coli ATCC 25922, Staphylococcus aureus ATCC 25923, and the halotolerant bacterium, Virgibacillus halodenitrificans, isolated from a salt crystal from Unirea mine, Slănic Prahova, Romania, were used. The gel Gel 2 (SiO2-ZnO (20 mol%)) showed the best properties.


KOVALEN ◽  
2021 ◽  
Vol 7 (3) ◽  
pp. 208-213
Author(s):  
Mukhtar Ghozali ◽  
Gamaliel Tanaka ◽  
Muhammad Misbahussalam ◽  
Tifa Paramitha

ZSM-5 is a synthetic zeolite which has a complex production process and is affected by operating conditions, such as temperature and time. In this study, synthesized ZSM-5 without template by hydrothermal method. An autoclave reactor was used for the hydrothermal process. The aim of this study was to investigate the effect of varied hydrothermal times of 24 and 48 hours with a hydrothermal temperature of 180oC on the characteristic of ZSM-5. The raw materials used were silica oxide and aluminum hydroxide as a source of silica and alumina. The synthesis results were characterized using X-Ray Diffraction (XRD). Based on XRD results, the best result was obtained in performed at 48 hours hydrothermal time indicating the formation of ZSM-5 material at the 22.2o position. The percentage crystallinity of the sample at the hydrothermal time of 48 hours was 51.3%.


2014 ◽  
Vol 1077 ◽  
pp. 135-138
Author(s):  
Luiz Oliveira Veriano dalla Valentina ◽  
Marilena Valadares Folgueras ◽  
Wanessa Rejane Knop ◽  
Maria Cristina Pacheco do Nascimento ◽  
Glaucia Aparecida Prates

As the raw materials used in the ceramic materials manufacturing are natural, it is important to use them as a alternative materials, thus decreasing the elements demand taken from nature. This paper aims the characterization of foundry solid powder exhaust from a brazilian company located in Joinville - SC as an alternative raw material for ceramic coating by X-ray diffraction (XRD), thermal analysis (DSC) and thermogravimetric (TG). The dust depletion is caused in the manufacturing mold sand process, when the bentonita (clay), silica sand and coal during the metal parts production are mixed in green sand production. The raw materials were characterized through X-ray diffraction (XRD), thermal (DSC) and thermogravimetric analisys (TG). The atomized powder thermogravimetric analysis curve shows three intervals associated with the mass loss and it is typical of clay commercial application.


2016 ◽  
Vol 869 ◽  
pp. 191-194
Author(s):  
Carolina del Roveri ◽  
R.A. Cunha ◽  
Antenor Zanardo ◽  
Letícia Hirata Godoy ◽  
Maria Margarita Torres Moreno ◽  
...  

The Santa Gertrudes ́ Ceramic Polo is the Brazilian region with national and international prominence in the manufacturing of ceramic tiles. Some raw materials used by ceramic industry and coatings industries in this region were characterized in terms of chemical-mineralogical and microscopic view, in order to promote the best technological characterization of them. For this, chemical analysis of major elements and trace X-ray diffraction and microscopic analysis by SEM, TEM and Electron microprobe were performed by ICP-MS. The results showed that the raw materials commonly referred to as "clays" are actually constituted by various mineral phases, which directly influence the properties of the same ceramics. Also showed that, by virtue of this constitution, different formulations can be developed, using the best raw materials found in the region of Santa Gertrudes, SP.


2019 ◽  
Vol 69 (334) ◽  
pp. 189
Author(s):  
P. Rubio de Hita ◽  
F. Pérez-Gálvez ◽  
M. J. Morales-Conde ◽  
M. A. Pedreño-Rojas

This study analyses a procedure to manufacture mortars with different percentages of ceramic waste as partial replacement for aggregates. The study also examines the physical, chemical and mechanical properties of the new mortars, analysing substitution ratios that range from 10% to 50%. Prior to this, all the materials used in the production of the mortar were characterised using X-ray diffraction (XRD) and fluorescence (XRF). The objective was to determine the similarity between different types of ceramic waste, as well as the differences in the minerology and chemical composition with the aggregate. The results of the study show that it is possible to obtain mortars with lower densities compared to the same product with no recycled content. The product’s characteristics make it ideal for the manufacture of prefabricated components for structural floors for rehabilitation works. Finally, the pieces are used in a real rehabilitation case study, highlightining the structural advantages.


Minerals ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 393
Author(s):  
Ainhoa Alonso-Olazabal ◽  
Luis Angel Ortega ◽  
Maria Cruz Zuluaga ◽  
Graciela Ponce-Antón ◽  
Javier Jiménez Echevarría ◽  
...  

This study characterises the mortar materials used in the construction of walls and floors at the Arroyo de la Dehesa de Velasco site, located near the Roman city of Uxama Argaela (the modern Burgo de Osma—Ciudad de Osma, Soria, Spain). Multilayer mortars have been characterised by petrographic, mineralogical (X-ray diffraction and scanning electron microscopy with energy dispersive analyses and geochemical analysis (X-ray fluorescence). Additionally, radiocarbon dating of the mortar binder fraction was performed in order to establish the chronology of the building in the absence of other archaeological chronological records. The results showed that similar siliceous aggregates and lime binders were used in the fabrication of multilayer system mortars. Some multilayer wall mortars show ceramic fragments or brick powder to produce hydraulic mortars and improve the resistance to moisture. The raw materials used for the construction of the site were of local origin and the construction was built during the first century BC, according to radiocarbon dating.


Cerâmica ◽  
2015 ◽  
Vol 61 (360) ◽  
pp. 414-419 ◽  
Author(s):  
F. B. Siqueira ◽  
J. N. F. Holanda

Abstract In the cellulose industry the Kraft process is widely used to produce cellulose. This process generates huge volumes of inorganic solid wastes, including the grits waste. In Brazil, the final disposal of this solid waste is of high economical and environmental interest. The present work assesses the influence of the addition of grits waste on the densification behavior of soil-cement bricks. The raw materials used were soil, Portland cement, and grits waste. Soil-cement bricks containing up to 30 wt.% grits waste in partial replacement of Portland cement were prepared by uniaxial pressing and cured for 28 days. The following technological properties were determined: water absorption, compressive strength, and durability. The microstructure was evaluated by scanning electron microscopy and X-ray diffraction. The experimental results indicated that the addition of grits waste influenced positively the densification behavior of the soil-cement bricks. Moreover, the grits waste could be incorporated into the soil-cement brick composition up to 20 wt.% as a partial replacement of Portland cement.


2021 ◽  
Vol 5 (2) ◽  
pp. 16
Author(s):  
Isabel Padilla ◽  
Maximina Romero ◽  
José I. Robla ◽  
Aurora López-Delgado

In this work, concentrated solar energy (CSE) was applied to an energy-intensive process such as the vitrification of waste with the aim of manufacturing glasses. Different types of waste were used as raw materials: a hazardous waste from the aluminum industry as aluminum source; two residues from the food industry (eggshell and mussel shell) and dolomite ore as calcium source; quartz sand was also employed as glass network former. The use of CSE allowed obtaining glasses in the SiO2-Al2O3-CaO system at exposure time as short as 15 min. The raw materials, their mixtures, and the resulting glasses were characterized by means of X-ray fluorescence, X-ray diffraction, and differential thermal analysis. The feasibility of combining a renewable energy, as solar energy and different waste for the manufacture of glasses, would highly contribute to circular economy and environmental sustainability.


Sign in / Sign up

Export Citation Format

Share Document