scholarly journals Two-dimensional ultrasound: can it replace computed tomography in liver volume assessment?

2019 ◽  
Vol 50 (1) ◽  
Author(s):  
Shimaa Farghaly ◽  
Marwa Makboul ◽  
Mahmoud Refaat Shehata
Keyword(s):  
Computed Tomography ◽  
Gold Standard ◽  
Preoperative Evaluation ◽  
Liver Volume ◽  
Age Groups ◽  
Volume Measurement ◽  
Volume Estimation ◽  
Two Dimensional ◽  
Volumetric Assessment ◽  
Significant Difference

Abstract Background Liver volume estimation is considered as an integral part in preoperative evaluation in patients undergoing liver transplantation; computed tomography and magnetic resonance imaging are considered the gold standard methods for liver volume estimation, and both are reliable and valid in determination of liver volume via manual and semi-automated methods. Reliable and accurate set of three simple measurement planes using two-dimensional ultrasound for volumetric assessment of liver was determined, and predictive equation using these three simple measurements was performed, which is simple to perform and easy to calculate, in order to evaluate liver volume and validate these measurements against CT images. Our aim in this study was to evaluate the efficacy and validity of two-dimensional ultrasound in liver volume estimation compared to CT volumetry as a gold standard. Results A strong linear positive correlation with no statistical significant difference was found between 2D US and semi-automated CT volumetric, and result was r = 0.7402 and p > 0.05, with an average liver volume of 1572.10 (± 326.43) cm3 and 1559.30 (± 381.02) cm3 respectively. No statistically significant difference was found also between the two modalities in different age groups and different sexes. Conclusion Simple linear two-dimensional ultrasound could be considered an efficient, accurate, and trustable tool for liver volume measurement in clinical practice.

scholarly journals Volume Measurements in Aortic Root Assessment Using Two-Dimensional Echocardiography

2016 ◽  
Vol 10 ◽  
pp. CMC.S39383
Author(s):  
Adebayo T. Oyedeji ◽  
Bolaji E. Egbewale ◽  
Adeseye A. Akintunde ◽  
Ebenezer A. Ajayi ◽  
Olukolade O. Owojori ◽  
...  
Keyword(s):  
Aortic Root ◽  
Normal Population ◽  
Age Groups ◽  
Aortic Dilatation ◽  
Two Dimensional ◽  
Linear Measurements ◽  
2D Echocardiography ◽  
Significant Difference ◽  
Volume Measurements ◽  
Dimensional Echocardiography

Background Aortic dilatation is associated with the presence of aortic diseases. Current guidelines for assessing the aortic root (AoR) depend on linear measurements acquired by two-dimensional (2D) echocardiography. We considered that real-time three-dimensional echocardiography, which correlates better with AoR volume obtained by computed tomography, is widely unavailable, and therefore, there is a need to determine the AoR volume using 2D echocardiography. Methods Fifty-one consecutive apparently healthy volunteers were recruited and subsequently divided into three age groups. Specified planes of acquisition and previously defined landmarks were identified, and phases of the cardiac cycle that allowed for measurement standardization were used. Volume was determined by the modified Simpson's method. Results Although the average diastolic and systolic volume measurements of the AoR dimensions were not significantly different across the three age groups in the study population, a highly significant difference was observed in the volume measurements between male and female normotensive persons, P < 0.01 in each case. AoR volume measurements were five times in the diseased compared with the normotensive individuals; however, linear measurements were only 1.5 times in size of the normal individuals. Both point and interval estimates of the volume measurements of AoR in adult normotensives in three age groups were presented as baseline information. Conclusions We hereby present a novel way to determine the AoR volume using 2D echocardiography and the normal reference range with respect to age and gender. We also established the relevance of our measurement by comparing the normal population with two isolated diseased aortas.

scholarly journals Evaluation of version of acetabular component following total hip replacement on conventional radiograph and computed tomography

2020 ◽  
Vol 27 (2) ◽  
pp. 179-185
Author(s):  
Manish Raj ◽  
Ashish Jaiman ◽  
Rajesh Kumar Chopra
Keyword(s):  
Computed Tomography ◽  
Ct Scan ◽  
Total Hip Replacement ◽  
Gold Standard ◽  
Hip Replacement ◽  
Regression Line ◽  
Patient Positioning ◽  
Acetabular Version ◽  
Total Hip ◽  
Significant Difference

Background/Purpose: Total hip replacement (THR) is considered as one of the most successful orthopedic procedures. However, improperly placed components can lead to instability and accelerated wear. Acetabular cup inclination can be very well accessed by anteroposterior pelvis X-rays; for acetabular version assessment, computed tomography (CT) scan is the gold standard. CT scan is not readily available at many centers and the surgeon has to rely on X-ray methods for evaluation of acetabular version to audit results and to predict behavior of the surgical intervention. This prospective study was undertaken to compare Woo and Morrey’s and ischiolateral methods of assessment of acetabular version on cross-table lateral radiographs with CT assessment and to assess the validity of radiographic methods with respect to CT scan method. Material and methods: A prospective follow-up study was conducted for 18 months’ duration (October 2016 to March 2018) on 30 adult patients who underwent THR surgery. Cross-table lateral radiograph was obtained at 3 and 6 weeks in the postoperative period. Two observers made each observation at two different points of time. CT scan was performed at 3 weeks. Version as measured by radiographs and CT scan was recorded. Results: The major overlap in the distribution of the values of the Woo and Morrey method suggests that there is no significant difference between the observations. Distribution of the values of the ischiolateral view and the CT scan value distributions have a very small overlap and hence suggest a strong significant difference between the two. Conclusion: In this study, Woo and Morrey’s method and ischiolateral method of assessment of acetabular version were compared with CT assessment. We found that in Woo and Morrey’s method, values were comparable to CT scan values, when put on regression line. However, in situation of change in patient positioning, namely hip stiffness in contralateral hip, measurement of component changed in series of radiography due to differences in pelvis tilt. So, in these circumstances, we can use ischiolateral method which can give consistent measurement. But it will not be in concordance with CT scan values and Woo and Morrey values, as represented in regression line. The high intra-class correlation coefficients for both intra- and inter-observer reliability indicated that the angle measured with these methods is consistent and reproducible for multiple observers. CT, however, be considered as gold standard for measurement owing to control over pelvic rotation and/or tilt/patient positioning.

Influence of Comorbidity on Outcome after Pulmonary Resection in the Elderly

2007 ◽  
Vol 15 (4) ◽  
pp. 297-302 ◽  
Author(s):  
Morris Beshay ◽  
Patrick Dorn ◽  
Hans-Beat Ris ◽  
Ralph A Schmid
Keyword(s):  
Pulmonary Resection ◽  
Preoperative Evaluation ◽  
Lung Resection ◽  
Survival Rates ◽  
Age Groups ◽  
The Elderly ◽  
Major Complications ◽  
Proper Patient Selection ◽  
Significant Difference ◽  
Group 3

The aim of this study was to determine the influence of comorbidity on outcome after pulmonary resection in patients over 75 years old. Three hundred and thirty-three patients with non-small-cell lung cancer operated on between 1998 and 2002 were divided into 3 age groups: < 60 years (group 1), 60–75 years (group 2), > 75 years (group 3). Overall operative mortality was 0.3%; 30-day mortality was 1%. There were more major complications with re-operation in groups 1 and 2, but minor complications occurred significantly more frequently in group 3 (36% vs 16%). Overall mean hospital stay was 12 days, with no significant difference among groups. Three-year survival rates were: 80%, 70%, and 65% in groups 1, 2, and 3, respectively, with no significant difference among groups. Age or the presence of comorbidity should not be considered contraindications for lung resection. With proper patient selection and careful preoperative evaluation, many major complications after pneumonectomy are avoidable.

Longitudinal micro-computed tomography monitoring of progressive liver regeneration in a mouse model of partial hepatectomy

2016 ◽  
Vol 51 (4) ◽  
pp. 422-426 ◽  
Author(s):  
Olga M Will ◽  
Timo Damm ◽  
Graeme M Campbell ◽  
Witigo von Schönfells ◽  
Yahya Açil ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Liver Regeneration ◽  
Partial Hepatectomy ◽  
Liver Volume ◽  
Study Groups ◽  
Volume Estimation ◽  
Multiple Time ◽  
Post Mortem ◽  
Micro Computed Tomography ◽  
Group 2

The partial hepatectomy (PH) model is widely used to study liver regeneration. Currently, the extent of regeneration is analyzed by measuring the weight of the liver post-mortem or by magnetic resonance imaging. In this study we aimed to determine whether liver volume gain can be accurately measured using micro-computed tomography (microCT). Approximately 42% of the liver was removed by ligation in C57BL/6 N mice. Mice were divided into two study groups. In group 1 conventional characterization of liver hyperplasia was performed by weighing the liver post-mortem. In group 2, liver volume gain was determined by microCT volume estimation. MicroCT results showed equivalent regeneration rates compared with the conventional method without the need to mathematically determine initial liver weights before PH. This parameter is strongly influenced by the age, strain and sex of the mice. In addition non-invasive microCT determination of volume gain over multiple time-points using the same animal reduces the number of animals needing to be used (in line with the 3R principle of replacement, reduction and refinement).

scholarly journals Initial Experience with Digital Patient Briefing in Computed Tomography

2018 ◽  
Vol 191 (06) ◽  
pp. 540-546
Author(s):  
Babak Alikhani ◽  
Bennet Hensen ◽  
Arne Grosser ◽  
Maria Inés Cartes Febrero ◽  
Markus von Bestenbostel ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Statistical Significance ◽  
Age Groups ◽  
Patient Age ◽  
Open Questions ◽  
Patient Âgé ◽  
Significant Difference ◽  
Student’S T ◽  
The Individual ◽  
Time Required

Purpose To assess digital patient briefing as an alternative to conventional paper documentation. Materials and Methods 502 patients with a planned computed tomography (CT) examination were selected for digital patient briefing using the E-ConsentPro software from Thieme Compliance on an iPad by Apple (Cupertino, California, USA). For the analysis, three age groups were formed. The time required for the patient briefing, the number of open questions as well as the time needed for discussion with physicians were determined. Student’s t-test was performed to assess statistical significance. Results There was no significant difference between patient age and briefing time which was about 20 minutes on average. The number of open or unclear questions increased with patient age. While patients younger than 30 years of age had about 2 open questions, patients over 30 and 60 years had about 4 and 5 questions, respectively. The total time needed for discussion with physicians was less than 2 minutes on average. A significant difference in the time required for discussion with physicians could not be observed between the individual age groups. Conclusion Tablet-based digital briefing allows the storage of patient documents with reasonable time and effort. Furthermore, it minimizes the risk of data loss. Key Points  Citation Format

scholarly journals Estimating the Entrance Surface Dose in the Eyes, Thyroid, and Parotid Gland Regions in Adult and Pediatric Groups: A Cone-Beam Computed Tomography Technique

2021 ◽  
Author(s):  
Reza Omidi ◽  
Fariba Farhadi Birgani ◽  
Ali Asghar Parach ◽  
Hamed Zamani ◽  
Saman Dalvand ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Parotid Gland ◽  
Cone Beam Computed Tomography ◽  
Pediatric Patients ◽  
Age Groups ◽  
Cone Beam ◽  
Surface Dose ◽  
Parotid Glands ◽  
Entrance Surface Dose ◽  
Significant Difference

Purpose: This study aimed to determine the Entrance Surface Dose (ESD) of sensitive organs in Cone-Beam Computed Tomography (CBCT) imaging of the maxillofacial region in the two age groups of adult and pediatric. Materials and Methods: In this work, the measurements were performed using Thermo Luminescent Dosimeters (TLD-GR200). The imaging was performed using a PROMAX 3D CBCT scanner for 30 adults and 20 pediatric patients. The ESD value for each patient in the region of eyes, thyroid, and parotid glands was measured by 15 TLDs during CBCT of maxillofacial. Results: The highest and lowest mean values of ESDs were related to the parotid and thyroid gland regions in adults, 4.77 ± 0.61 mGy and 0.37 ± 0.16 mGy, respectively. In addition, these values were obtained 2.97 ± 0.36 mGy and 0.35 ± 0.12 mGy in pediatric groups as the highest and lowest values in that order. The results showed that the ESD values of the parotid gland regions in maxilla and mandible examinations had a significant difference (P <0.05). In addition, there was a significant difference between the ESD values of the parotid gland regions among the adults and pediatric groups (P <0.05). Conclusion: According to the results, the ESD values in both age groups were higher in the parotid gland region during maxillofacial CBCT examinations. Therefore, it is recommended to set radiation parameters like mAs as low as possible for reducing the patient dose, especially pediatric patients due to the more sensitive organs.

scholarly journals 3D Printing of Stereolithographic Models with Open Protocol

2020 ◽  
pp. 421-431
Author(s):  
Jorge Oviedo-Quirós ◽  
José Campos-Zumbado ◽  
Diana Hernández-Montoya ◽  
María Fernanda Lines-Gutiérrez
Keyword(s):  
Computed Tomography ◽  
3D Printing ◽  
Gold Standard ◽  
Exploratory Study ◽  
Cone Beam ◽  
Significant Difference ◽  
Software And Hardware ◽  
Bone Structures ◽  
Senior Students ◽  
Stereolithographic Models

A descriptive and exploratory study was carried out with the aim of proposing and validating an open protocol for making 3D impressions of stereolithographic models, which is available to professionals in the area of Dentistry. Nine operators (senior students of the Dentistry degree), without previous experience in the use of software and hardware for 3D printing, divided into two groups were trained through theoretical and practical sessions. The A worked with three helical tomographies (TAC) and the B with three cone beam computed tomography (CBCT), all in DICOM format, converted to STL files. In total, 99 bone structures corresponding to 33 jaws, 33 axis and 33 facial masses-skull bases were analyzed, and a total of 33 jaws were printed in PLA (polylactic acid filament). At the end of the study, no statistically significant difference was found in the implementation of the proposed protocol between the operators, the measurements of the pieces printed by each of them, the gold standard, the TAC and the CBCT, with which not only validated the protocol, but it was possible to determine the resources necessary to carry out this type of 3D printing.

scholarly journals Difference in glenoid retroversion between two-dimensional axial computed tomography and three-dimensional reconstructed images

2020 ◽  
Vol 23 (2) ◽  
pp. 71-79
Author(s):  
Hyungsuk Kim ◽  
Chang Hyun Yoo ◽  
Soo Bin Park ◽  
Hyun Seok Song
Keyword(s):  
Computed Tomography ◽  
Total Shoulder Arthroplasty ◽  
Three Dimensional ◽  
Ct Images ◽  
Body Axis ◽  
Reconstructed Image ◽  
Two Dimensional ◽  
Glenoid Version ◽  
Significant Difference ◽  
Scapular Body

Background: The glenoid version of the shoulder joint correlates with the stability of the glenohumeral joint and the clinical results of total shoulder arthroplasty. We sought to analyze and compare the glenoid version measured by traditional axial two-dimensional (2D) computed tomography (CT) and three-dimensional (3D) reconstructed images at different levels.Methods: A total of 30 cases, including 15 male and 15 female patients, who underwent 3D shoulder CT imaging was randomly selected and matched by sex consecutively at one hospital. The angular difference between the scapular body axis and 2D CT slice axis was measured. The glenoid version was assessed at three levels (midpoint, upper one-third, and center of the lower circle of the glenoid) using Friedman’s method in the axial plane with 2D CT images and at the same level of three different transverse planes using a 3D reconstructed image. Results: The mean difference between the scapular body axis on the 3D reconstructed image and the 2D CT slice axis was 38.4°. At the level of the midpoint of the glenoid, the measurements were 1.7° ± 4.9° on the 2D CT images and −1.8° ± 4.1° in the 3D reconstructed image. At the level of the center of the lower circle, the measurements were 2.7° ± 5.2° on the 2D CT images and −0.5° ± 4.8° in the 3D reconstructed image. A statistically significant difference was found between the 2D CT and 3D reconstructed images at all three levels. Conclusions: The glenoid version is measured differently between axial 2D CT and 3D reconstructed images at three levels. Use of 3D reconstructed imaging can provide a more accurate glenoid version profile relative to 2D CT. The glenoid version is measured differently at different levels.

scholarly journals Determining Gender and Age by Mandibular Anatomy Landmarks in Computed Tomography with Cone-Beam (CBCT)

2019 ◽  
Vol 9 (1) ◽  
pp. 33
Author(s):  
Nasim Shams ◽  
Mahshid Razavi ◽  
Azar Mehrabi ◽  
Sina Salehin ◽  
Parisa Sarikhani
Keyword(s):  
Computed Tomography ◽  
Medical Science ◽  
Age Groups ◽  
Cone Beam ◽  
Tangent Point ◽  
Age And Gender ◽  
Gonial Angle ◽  
Gender And Age ◽  
Significant Difference ◽  
And Gender

Introduction: this study aimed at determining gender and age by mandibular anatomy landmarks in computed tomography with Cone-Beam (CBCT). Methodology: this cross sectional study was performed on 147 CBCT images available in archive of radiology in the dentistry department of Ahvaz Jondi Shapoor medical science university. In this research, we assessed parameters including SMEF: Distance from mental foramen to the highest point of alveolar crest ridge, BIAC: distance from lowest point of IAC to the most anterior tangent point of buccal mandibular plate, LIAC: distance from the lowest IAC point to the most posterior tangent point o mandibular lingual plate, IMEF: distance from the lowest mental hole border to the lowest tangent point on inferior mandibular border, D2: distance from the lowest IAC canal border to the lowest tangent point on inferior mandibular border and gonial angle: junction of inferior mandibular border and posterior ramus border. Data were analysed by SPSS software 20th version and Spearman correlation coefficient tests, one-way variance analysis, Kruskal-Wallis, independent t, and Uman Withney. Results: SMEF level was significantly different in groups and in 25-34 group it was significantly higher than under 25 group. In right side it was significantly higher than female. IMEF had no significant difference in age groups and in both side it was higher in male than female. BIAC in both sides had no significant difference. LIAC in both sides an in different ages had no significant difference in male and female. D2 had no significant difference in both sides. But in a group with patients older than 55 it was significantly higher than 45-54 group. In addition, in left side it was higher in male than female there was no significant difference in gonial angle in different groups in left side with in right side there was significant difference in different age groups. But there was no significant difference in gender. Conclusion: evaluated indices in this research are not ry accurate to forecast age and gender and they cannot be used as accurate tools in estimating age and gender of people.

Determining the Accuracy of the Mandibular Canal Region in 3D Biomodels Fabricated from CBCT Scanned Data: A Cadaveric Study

2019 ◽  
Vol 15 (7) ◽  
pp. 645-653 ◽  
Author(s):  
Syed Yusoff Alzawawi Syed Abd Fattah ◽  
Firdaus Hariri ◽  
Phrabhakaran Nambiar ◽  
Zulkiflee Abu Bakar ◽  
Zainal Ariff Abdul Rahman
Keyword(s):  
Computed Tomography ◽  
Gold Standard ◽  
Mandibular Canal ◽  
Mean Value ◽  
Cone Beam ◽  
Cross Sectional ◽  
Measurement Protocol ◽  
Significant Difference ◽  
The Mean ◽  
Using Data

Objective:To validate the accuracy of the mandibular canal region in 3D biomodel produced by using data obtained from Cone-Beam Computed Tomography (CBCT) of cadaveric mandibles.Methods:Six hemi-mandible samples were scanned using the i-CAT CBCT system. The scanned data was transferred to the OsiriX software for measurement protocol and subsequently into Mimics software to fabricate customized cutting jigs and 3D biomodels based on rapid prototyping technology. The hemi-mandibles were segmented into 5 dentoalveolar blocks using the customized jigs. Digital calliper was used to measure six distances surrounding the mandibular canal on each section. The same distances were measured on the corresponding cross-sectional OsiriX images and the 3D biomodels of each dentoalveolar block.Results:Statistically no significant difference was found when measurements from OsiriX images and 3D biomodels were compared to the “gold standard” -direct digital calliper measurement of the cadaveric dentoalveolar blocks. Moreover, the mean value difference of the various measurements between the different study components was also minimal.Conclusion:Various distances surrounding the mandibular canal from 3D biomodels produced from the CBCT scanned data was similar to that of direct digital calliper measurements of the cadaveric specimens.

Sign in / Sign up

Export Citation Format

Share Document