Dimethyl Hydantoin Formaldehyde: A new Water-soluble Resin for Use as a Mounting Medium

1958 ◽  
Vol s3-99 (48) ◽  
pp. 451-452
Author(s):  
H. F. STEEDMAN

Dimethyl hydantoin formaldehyde resin dissolved in water or in 70 ml ethyl slcohol+30 ml wster is put forward as a solution suitsble for the mounting of insects, smsll crustacea, &c. Its chief advantage over other water-soluble resins is its high solubility in water, its excellent adhesion to glass, its low viscosity even in high per-centage solutions, snd its hsrdness on drying.

Author(s):  
J. G. Robertson ◽  
D. F. Parsons

The extraction of lipids from tissues during fixation and embedding for electron microscopy is widely recognized as a source of possible artifact, especially at the membrane level of cell organization. Lipid extraction is also a major disadvantage in electron microscope autoradiography of radioactive lipids, as in studies of the uptake of radioactive fatty acids by intestinal slices. Retention of lipids by fixation with osmium tetroxide is generally limited to glycolipids, phospholipids and highly unsaturated neutral lipids. Saturated neutral lipids and sterols tend to be easily extracted by organic dehydrating reagents prior to embedding. Retention of the more saturated lipids in embedded tissue might be achieved by developing new cross-linking reagents, by the use of highly water soluble embedding materials or by working at very low temperatures.


2017 ◽  
Vol 56 (25) ◽  
pp. 7336-7344 ◽  
Author(s):  
Yi Zhang ◽  
Xu Zhao ◽  
Qiwei Yang ◽  
Zhiguo Zhang ◽  
Qilong Ren ◽  
...  

2013 ◽  
Vol 13 (10) ◽  
pp. 5117-5135 ◽  
Author(s):  
B. Ervens ◽  
Y. Wang ◽  
J. Eagar ◽  
W. R. Leaitch ◽  
A. M. Macdonald ◽  
...  

Abstract. Cloud and fog droplets efficiently scavenge and process water-soluble compounds and, thus, modify the chemical composition of the gas and particle phases. The concentrations of dissolved organic carbon (DOC) in the aqueous phase reach concentrations on the order of ~ 10 mgC L−1 which is typically on the same order of magnitude as the sum of inorganic anions. Aldehydes and carboxylic acids typically comprise a large fraction of DOC because of their high solubility. The dissolution of species in the aqueous phase can lead to (i) the removal of species from the gas phase preventing their processing by gas phase reactions (e.g., photolysis of aldehydes) and (ii) the formation of unique products that do not have any efficient gas phase sources (e.g., dicarboxylic acids). We present measurements of DOC and select aldehydes in fog water at high elevation and intercepted clouds at a biogenically-impacted location (Whistler, Canada) and in fog water in a more polluted area (Davis, CA). Concentrations of formaldehyde, glyoxal and methylglyoxal were in the micromolar range and comprised ≤ 2% each individually of the DOC. Comparison of the DOC and aldehyde concentrations to those at other locations shows good agreement and reveals highest levels for both in anthropogenically impacted regions. Based on this overview, we conclude that the fraction of organic carbon (dissolved and insoluble inclusions) in the aqueous phase of clouds or fogs, respectively, comprises 2–~ 40% of total organic carbon. Higher values are observed to be associated with aged air masses where organics are expected to be more highly oxidised and, thus, more soluble. Accordingly, the aqueous/gas partitioning ratio expressed here as an effective Henry's law constant for DOC (KH*DOC) increases by an order of magnitude from 7 × 103 M atm−1 to 7 × 104 M atm−1 during the ageing of air masses. The measurements are accompanied by photochemical box model simulations. These simulations are used to contrast two scenarios, i.e., an anthropogenically vs. a more biogenically impacted one as being representative for Davis and Whistler, respectively. Since the simplicity of the box model prevents a fully quantitative prediction of the observed aldehyde concentrations, we rather use the model results to compare trends in aldehyde partitioning and ratios. They suggest that the scavenging of aldehydes by the aqueous phase can reduce HO2 gas phase levels significantly by two orders of magnitude due to a weaker net source of HO2 production from aldehyde photolysis in the gas phase. Despite the high solubility of dicarbonyl compounds (glyoxal, methylglyoxal), their impact on the HO2 budget by scavenging is < 10% of that of formaldehyde. The overview of DOC and aldehyde measurements presented here reveals that clouds and fogs can be efficient sinks for organics, with increasing importance in aged air masses. Even though aldehydes, specifically formaldehyde, only comprise ~ 1% of DOC, their scavenging and processing in the aqueous phase might translate into significant effects in the oxidation capacity of the atmosphere.


2014 ◽  
Vol 12 (3) ◽  
pp. 403-415 ◽  
Author(s):  
Mopelola Idowu ◽  
Yasin Arslanoğlu ◽  
Tebello Nyokong

AbstractPeripherally and non-peripherally tetrasubstituted-[(N-methyl-2-pyridylthio)]phthalocyaninato magnesium (II) (5 and 6) and chloro aluminium (III) (7 and 8) tetraiodide have been synthesized and characterized. The photophysical properties of the complexes in dimethyl sulfoxide (DMSO) and aqueous medium in the presence and absence of cremophore EL have been studied. These complexes show high solubility in aqueous medium though they were aggregated. The triplet state quantum yields (FT) and the triplet lifetimes (tT) were found to be higher in DMSO with ΦT ranging from 0.32 to 0.51, while tT ranged from 282 to 622 ms in DMSO, compared to aqueous medium (pH 7.4 buffer) where ΦT ranged from 0.15 to 0.19 and tT from 26 to 35 ms. Addition of cremophore EL in aqueous solution resulted in partial disaggregation and increased photoactivity. The fluorescence lifetimes of the complexes showed strong dependence on their immediate environment. The ionic magnesium(II) and aluminium(III) phthalocyanines strongly bind to bovine serum albumin (BSA).


2011 ◽  
Vol 306-307 ◽  
pp. 946-950 ◽  
Author(s):  
Bao Guo Ma ◽  
Hui Xian Wang ◽  
Jia Xiao ◽  
Li Xia Li ◽  
Zhi Bin Cheng

Viscosity modifying admixtures (VMA), known as an important component, are water-soluble polymers that can increase the viscosity and cohesion of self-compacting concrete( SCC). This article presents the effect of four different types of VMA on the workability of SCC , which including flowability, filling ability, passing ability and segregation resistance ability of the fresh concrete. The results show that the low viscosity of VMA satisfies the workability requirement of fresh properties of SCC.


2021 ◽  
Author(s):  
Elizete Baggio ◽  
Bianca Santinon Scopel ◽  
Marieli Rosseto ◽  
Aline Dettmer ◽  
Camila Baldasso

Abstract BACKGROUND: The development of biodegradable materials, especially those from renewable sources, is important to reduce the impact of plastic waste on the environment. On the other hand, protein-based films have high solubility in water, in addition to limited mechanical properties, which makes their application in high humidity environments a challenge. The enzyme transglutaminase (TGase) can reduce the interaction of gelatin films with water, improving these properties, while improving the mechanical properties. Therefore, this study aimed to determine the best condition for using the TGase enzyme, through variations in the gelatin and enzyme mass, in addition to the time that the enzyme acts on the gelatin, evaluating the properties tensile strength, elongation, and solubility in water. In a second set of experiments gelatin amount was kept fixed at 4%, and other proportions of an enzyme (1% and 5% w/w gelatin) were studied, evaluating beyond these properties the degradation in simulated soil through thermogravimetry analysis and Fourrier Transform Infrared Spectrometer (FTIR).RESULTS: It was concluded that the higher concentration of TGase (5%) promoted a greater reduction in the solubility of the films, making the films more resistant to biodegradation, facilitating their application due to the increase in their useful life.CONCLUSION: At the end of the degradation test, it was noticed that the films were degraded, presenting the potential for substitution of polymers of fossil origin, which could be an alternative to the problem of polymeric residues in the environment.


2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Hong Anh Duong ◽  
Thi Vi Phung ◽  
Thuy Ngoc Nguyen ◽  
Lan-Anh Phan Thi ◽  
Hung Viet Pham

Residue concentrations of fifteen antibiotics including sulfonamides, quinolones, macrolides, β-lactams, and trimethoprim in lakes from Hanoi metropolitan area, Vietnam, were analyzed using ultra-performance liquid chromatography coupled with tandem mass spectrometry (UPLC/MS-MS) to elucidate their occurrence and behavior in urban environment. For surface water, the average concentrations of five antibiotic classes decreased in the order: sulfonamides (117.9 ng/L) > β-lactams (31.28 ng/L) > quinolones (20.19 ng/L) > macrolides (17.74 ng/L) > trimethoprim (8.93 ng/L). While the highest concentration of SMX was detected at 806.5 ng/L in surface water, those obtained in sediment were only at 1.35 ng/g because of their high solubility in water. Quinolones were found at a maximal concentration of 158.7 ng/L for OFL in water phase whereas those in sediment phase were 4,017 ng/g due to their great affinity in sediment. These findings revealed the different fate and release mechanisms of each antibiotic group in the environment. The ecological risk assessment implied some targeted compounds, and in particular, OFL and AZM could pose high risks to algae in the aquatic ecosystem.


Sign in / Sign up

Export Citation Format

Share Document