DEVELOPMENT OF MEMBRANE SENSORS BASED ON NEW HYBRID MATERIALS FOR THE DETERMINATION OF SULFUR AND MEDICI-NAL SUBSTANCES IN DOMESTIC AND INDUSTRIAL EFFLUENTS

2015 ◽  
Vol 4 (4) ◽  
pp. 31-32 ◽  
Author(s):  
Бобрешова ◽  
O Bobreshova ◽  
Денисова ◽  
T Denisova ◽  
Паршина ◽  
...  

Developed potentiometric PD sensors with new hybrid materials based on perfluorinated sulfokationoobmennyh mem-branes Nafion and MF 4SK contain-ing nanoparticles of hydrated metal oxide (including a functionalized surface) to quant-tively determination of sulfur compounds and is widely used in medical practice, local anesthetic agents (procaine, lidoka-in) in multicomponent aqueous media. Using sensors in the similarity-tion of composite materials can significant-ly increase their Chuv-tivity to define the components that helps to increase the accuracy of determination.. Easy to use, no sample preparation, automatic pro-cessing of data portability obespe Chiva-low labor intensity analysis, which makes available to develop mye-touch devices for a wide range of control organi-zation-tions and services for environmental monitoring of water flows of medical institutions and industrial enterprises.

Biosensors ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 63 ◽  
Author(s):  
Olga Senko ◽  
Nikolay Stepanov ◽  
Olga Maslova ◽  
Rashid Akhundov ◽  
Anvar Ismailov ◽  
...  

A biosensitive element in the form of bacterial Photobacterium phosphoreum cells immobilized in poly(vinyl alcohol) cryogel was tested for the determination of different mycotoxins under discrete and flow-through analysis conditions. The immobilized bioluminescent cells made it possible to quantify the presence of Ochratoxin A, Sterigmatocystin, Zearalenone, and Deoxynivalenon in aqueous media in a wide range of their concentrations (0.017–56 mg/L, 0.010–33 mg/L, 0.009–14 mg/L, and 0.026–177 mg/L, respectively) via measuring the quenching of cell luminescence. The flow conditions allowed the analysis sensitivity to be improved by an order of magnitude in terms of detected concentrations. Using the immobilized luminescent bacterial cells, we have shown the possibility of evaluating the efficiency of the mycotoxins’ hydrolysis under the action of enzymes. In this way, a 94 ± 4.5% efficiency of Zearalenone hydrolysis with hexahistidine-containing organophosphorus hydrolase for 1h-long treatment of the mycotoxin solution (100 mg/L) was shown.


2005 ◽  
Vol 09 (09) ◽  
pp. 609-616 ◽  
Author(s):  
André Luiz Tessaro ◽  
Daniela Martins Fernandes ◽  
Ailton José Terezo ◽  
Vagner Roberto de Souza ◽  
Noboru Hioka

The benzoporphyrin derivative, named B3B, is a promising new drug for application in photodynamic therapy. In aqueous organic solvent mixtures, B3B, can be used in topical application for superficial diseases, like for skin cancer. In this paper, the self-aggregation phenomena of porphyrin molecules in aqueous media was investigated using a chemometric tool to evaluate the effects of experimental variables on the stability of the B3B monomer in water/ethanol mixtures. A 23 factorial design was employed which permitted determination of the magnitude of experimental parameters which influence aggregation of the drug at different pHs using the minimum number of experiments. At first, the pK a values of the B3B in water/ethanol mixtures were determined by spectrophotometric measurements, resulting in pK a1 = 3.3 and pK a2 = 5.7, corresponding to the imino nitrogens and carboxylic groups, respectively. The experimental variables (B3B concentration, time and water/ethanol composition) were evaluated in three protonation states of the drug, at pH 7.0, 4.1 and 2.6. The two levels (low and high) were set up at: time 5 (-) and 360 minutes (+); [B3B] 4.4 × 10-6(-) and 26.5 × 10-6 M (+); and water content in ethanol 40 (-) and 60% (+). The main parameter that determines the magnitude of the effects seems to be the charge component of B3B, which can be modulated by the pH. The results from the 23 fractional design indicated that the main variable inducing B3B aggregation is the water percentage in ethanol at each pH selected. The magnitude of this effect was pronounced at pH 4.1 where the carboxylic and nitrogen free base forms of B3B are maintained. The factors of time and [B3B], despite being small, are not insignificant. Finally, the effect of water content was investigated in a wide range of water percentage in these three pHs.


2021 ◽  
Vol 4 (4) ◽  
pp. 290-294
Author(s):  
Umar Bilal ◽  
Ibrahim Imrana ◽  
Muhammad Suleiman Darma

Gravimetric Analysis as one of the Analytical method for the Quantitative Determination of sulphate ions from aqueous media being the most simplest, rapid and low-cost method. This study evaluates some selected parameters and the results were compared with some regulatory standard; Federal Ministry of Environment (FME) in Nigeria and the World Health Organization. The Concentration of the selected industrial effluent was determined using the aforementioned method. The values of Density, TSS and TS were in the range of 0.950 g/ml – 0.976 g/ml, 67 ppm – 2051 ppm and 728 mg/L- 2700 mg/L respectively. While the percentage of sulphate obtained from each sample were 14.65%, 7.35%, 6.19, 17.93% and 29.01% for NASCO, DANA, KRPC, NILEST and KCV respectively. A new technological treatment process is recommended for these industries to provide good ways on waste management that are economically viable.


2020 ◽  
Vol 99 (5) ◽  
pp. 493-497
Author(s):  
M. M. Aslanova ◽  
T. V. Gololobova ◽  
K. Yu. Kuznetsova ◽  
Tamari R. Maniya ◽  
D. V. Rakitina ◽  
...  

Introduction. The purpose of our work was to justify the need to improve the legislative, regulatory and methodological framework and preventative measures in relation to the spread of parasitic infections in the provision of medical care. There is a wide range of pathogens of parasitic infestations that are transmitted to humans through various medical manipulations and interventions carried out in various medical institutions. Contaminated care items and furnishings, medical instruments and equipment, solutions for infusion therapy, medical personnel’s clothing and hands, reusable medical products, drinking water, bedding, suture and dressing materials can serve as a major factor in the spread of parasitic infections in the provision of medical care. Purpose of research is the study of the structure and SMP of parasitic origin, circulating on the objects of the production environment in multi-profile medical and preventive institutions of stationary type in order to prevent the occurrence of their spread within medical institutions. Material and methods. The material for the study was flushes taken from the production environment in 3 multi-profile treatment and prevention institutions of inpatient type: a multi-specialty hospital, a maternity hospital and a hospital specializing in the treatment of patients with intestinal diseases for the eggs of worms and cysts of pathogenic protozoa. Results. During the 2-year monitoring of medical preventive institutions, a landscape of parasitic contamination was found to be obtained from the flushes taken from the production environment objects in the premises surveyed as part of the research work. Discussions. In the course of research, the risk of developing ISMP of parasitic origin was found to be determined by the degree of epidemiological safety of the hospital environment, the number and invasiveness of treatment and diagnostic manipulations and various medical technologies. Conclusion. It is necessary to conduct an expert assessment of regulatory and methodological documents in the field of epidemiological surveillance and sanitary and hygienic measures for the prevention of medical aid related infections of parasitic origin, to optimize the regulatory and methodological base, to develop a number of preventive measures aimed at stopping the spread of parasitic infections in the medical network.


2017 ◽  
Vol 15 (1) ◽  
pp. 21
Author(s):  
Haryo Suganda ◽  
Raja Muhammad Amin

This study is motivated the identification of policies issued by the regional Governmentof Rokan Hulu in the form of Regulatory region number 1 by 2015 on the determination of thevillage and Indigenous Village. Political dynamics based on various interests against themanufacture of, and decision-making in the process of formation of the corresponding localregulations determination of Indigenous Villages in the Rokan Hulu is impacted to a verysignificantamount of changes from the initial draft of the number i.e. 21 (twenty one) the villagebecame Customary 89 (eighty-nine) the Indigenous Villages who have passed. Type of thisresearch is a qualitative descriptive data analysis techniques. The research aims to describe theState of the real situation in a systematic and accurate fact analysis unit or related research, aswell as observations of the field based on the data (information). Method of data collectionwas done with interviews, documentation, and observations through fieldwork (field research).The results of the research on the process of discussion of the draft local regulations andmutual agreement about Designation of Indigenous Villages in the Rokan Hulu is, showed thatthe political dynamics that occur due to the presence of various political interests, rejectionorally by Villagers who were judged to have met the requirements of Draft Regulations to beformulated and the area for the set to be Indigenous Villages, and also there is a desire fromsome villages in the yet to Draft local regulations in order to set the Indigenous village , there isa wide range of interests of these aspects influenced the agreement to assign the entire localVillage which is in the Rokan Hulu become Indigenous village, and the village of Transmigrationinto administrative Villages where the initiator of the changes in the number of IndigenousVillages in the Rokan Hulu it is the desire of the local Government of its own.


2019 ◽  
pp. 1-8
Author(s):  
F. S. Nworie ◽  
S. O. Ngele ◽  
J. C. Onah

Metal ions present in waste samples, industrial effluents, acid mines and other aqueous media constitute a serious challenge in different human activities. Solvent extraction a technique for preconcentration, separation and identification of trace amount of metal ions coupled with multivariate chemometric technique was used for the determination of Fe(II) and Cr(III) from solutions in the presence of bis(salicylidene)ethylenediamine (SALEN). The influence of main extraction variables affecting the extraction efficiency was simultaneously studied and regression model equations illustrating the relationship between variables predicted. The extraction parameters (time of extraction, acid concentration, ligand concentration, temperature and metal concentration) were optimized using experimental designs with the contributions of the various parameters to extraction of the metal ions bound to the complexone evaluated using SPSS19.0 software. The statistically determined simulated models for the parameters were R2 = 0.946, 0.727, 0.793, 0.53, 0.53, 1.000 and F- values of 70.400, 13. 285, 15.348, 4.646 and 2.569×105 respectively for time of extraction, acid concentration, ligand concentration, temperature and metal concentration for Cr (III). For Fe (II), R2 = 0.243, 0.371, 0.519, 0.446, 1.000 and F-values of 0.964, 2.953, 4.310, 3.216 and 2.516×105 for time of extraction, acid concentration, ligand concentration, temperature and metal concentration respectively. The level of significance of the models as predicted was both lower than 5% making it feasible, efficient, reproducible and accurate. This means that metal ions at the conditions stated could be removed from waste samples, industrial effluents, acid mines and other aqueous media with extension in industrial scale application.


Author(s):  
Ekaterina V. Shulyak

Development of health care of Siberia in the 18<sup>th</sup>&nbsp;— first half of the 19<sup>th</sup> century was closely connected with economic and political development of the Russian state. Before the medical personnel emergence in Siberia its population received medication only in the form of folk remedies. Development of its territory, insanitary conditions of life of Siberians, constant contingent of exiled to the indigenous people, and severe climate contributed to the spread of such diseases as smallpox, syphilis, and others.<br> The first medical institutions of Siberia were military hospital and infirmaries. In the days of reign of the Empress Anna Ioannovna, the city medical care started developing, and thanks to an initiative of the industrial enterprises owners&nbsp;— medical care for miners. After the establishment of the Public Charity Orders in Siberia, hospitals under their jurisdiction began to function in Tobolsk, Irkutsk, and Tomsk. A worthy contribution to the development of local medical institutions was made by donators Tolstopyatov, Bednyagin, Chupalov, and others. However, deficiency of financing, hospitals, and the medical personnel couldn’t adequately satisfy the needs of Siberian inhabitants in medical care.<br> The purpose of the article is to analyse the condition of public health, causes of morbidity and mortality of the population, as well as the process of medical care development in Siberia the turn of the 18<sup>th</sup> century by means of a historical and genetic method.


2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Joachim Landers ◽  
Soma Salamon ◽  
Samira Webers ◽  
Heiko Wende

Abstract Mössbauer spectroscopy is a well-known technique to study complex magnetic structures, due to its sensitivity to electronic and magnetic interactions of the probed nucleus with its electronic surrounding. It has also been applied to the emerging fields of magnetic hybrid materials as well as to ferrofluids, as information on the magnetic alignment and the velocity of the probed nucleus, i.e. of the particle it is embedded in, can be inferred from the spectra in addition to the above-mentioned quantities. Considering the wide range of preparation methods and sample properties, including fluids, particle powders, sintered pellets, polymer matrices and viscoelastic hydrogels, a considerable advantage of Mössbauer spectroscopy is the usage of γ-photons. This allows measurements on opaque samples, for which optical experiments are usually not feasible, also making the technique relatively independent of specific sample geometries or preparation. Using iron oxide nanoparticles in glycerol solution as an exemplary material here, the variety of system parameters simultaneously accessible via Mössbauer spectroscopy can be demonstrated: Spectra recorded for particles of different sizes provided information on the particles’ Brownian dynamics, including the effect of the shell thickness on their hydrodynamic diameter, the presence (or absence) and ballpark frequency of Néel superspin relaxation as well as the particles’ average magnetic orientation in external magnetic fields. For single-core particles, this resulted in the observation of standard Langevin-type alignment behavior. Mössbauer spectra additionally provide information on the absolute degree of spin alignment, also allowing the determination of the degree of surface spin canting, which limits the maximum magnetization of ferrofluid samples. Analyzing the alignment behavior of agglomerated particles for comparison, we found a completely different trend, in which spin alignment was further hindered by the competition of easy magnetic directions. More complex particle dynamics are observed when going from ferrofluids to hybrid materials, where the particle mobility and alignability depends not only on the particles’ shape and material, but also on the matrices’ inner structure and the acting force-transfer mechanism between particles and the surrounding medium. In ferrohydrogels for example, particle mobility in terms of Mössbauer spectroscopy was probed for different crosslinker concentrations, resulting in widely different mesh-sizes of the polymer network and different degrees of freedom. While a decrease in particle dynamics is clearly visible in Mössbauer spectroscopy upon rising crosslinker density, complementary AC-susceptometry experiments indicated no Brownian motion on the expected timescales. This apparent contradiction could, however, be explained by the different timescales of the experiments, probing either the relatively free Brownian motion on ultrashort timescales or the more bound state preventing extensive particle motion by interaction with the trapping mesh walls in the millisecond regime. However, it should also be considered that the effect of the surroundings on particle rotation in AC-susceptometry may also differ from the variation in translational motion, probed by Mössbauer spectroscopy. Being sensitive mainly to translational motion also results in a wide range of particles to be accessible for studies via Mössbauer spectroscopy, including larger agglomerates embedded in polymers, intended for remote-controlled heating. Despite the agglomerates’ wide distribution in effective diameters, information on particle motion was found to be in good agreement with AC-susceptometry experiments at ultralow frequencies in and above the polymer melting region, while additionally giving insight into Néel relaxation of the individual nanoparticles and their magnetic structure.


Author(s):  
Hernâni Marques ◽  
Pedro Cruz-Vicente ◽  
Tiago Rosado ◽  
Mário Barroso ◽  
Luís A. Passarinha ◽  
...  

Environmental tobacco smoke exposure (ETS) and smoking have been described as the most prevalent factors in the development of certain diseases worldwide. According to the World Health Organization, more than 8 million people die every year due to exposure to tobacco, around 7 million due to direct ETS and the remaining due to exposure to second-hand smoke. Both active and second-hand exposure can be measured and controlled using specific biomarkers of tobacco and its derivatives, allowing the development of more efficient public health policies. Exposure to these compounds can be measured using different methods (involving for instance liquid- or gas-chromatographic procedures) in a wide range of biological specimens to estimate the type and degree of tobacco exposure. In recent years, a lot of research has been carried out using different extraction methods and different analytical equipment; this way, liquid–liquid extraction, solid-phase extraction or even miniaturized procedures have been used, followed by chromatographic analysis coupled mainly to mass spectrometric detection. Through this type of methodologies, second-hand smokers can be distinguished from active smokers, and this is also valid for e-cigarettes and vapers, among others, using their specific biomarkers. This review will focus on recent developments in the determination of tobacco smoke biomarkers, including nicotine and other tobacco alkaloids, specific nitrosamines, polycyclic aromatic hydrocarbons, etc. The methods for their detection will be discussed in detail, as well as the potential use of threshold values to distinguish between types of exposure.


Materials ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 37
Author(s):  
Mayra K. S. Monteiro ◽  
Djalma R. Da Silva ◽  
Marco A. Quiroz ◽  
Vítor J. P. Vilar ◽  
Carlos A. Martínez-Huitle ◽  
...  

This study aims to investigate the applicability of a hybrid electrochemical sensor composed of cork and graphite (Gr) for detecting caffeine in aqueous solutions. Raw cork (RAC) and regranulated cork (RGC, obtained by thermal treatment of RAC with steam at 380 °C) were tested as modifiers. The results clearly showed that the cork-graphite sensors, GrRAC and GrRGC, exhibited a linear response over a wide range of caffeine concentration (5–1000 µM), with R2 of 0.99 and 0.98, respectively. The limits of detection (LOD), estimated at 2.9 and 6.1 µM for GrRAC and GrRGC, suggest greater sensitivity and reproducibility than the unmodified conventional graphite sensor. The low-cost cork-graphite sensors were successfully applied in the determination of caffeine in soft drinks and pharmaceutical formulations, presenting well-defined current signals when analyzing real samples. When comparing electrochemical determinations and high performance liquid chromatography measurements, no significant differences were observed (mean accuracy 3.0%), highlighting the potential use of these sensors to determine caffeine in different samples.


Sign in / Sign up

Export Citation Format

Share Document